Experiències en PBL en els estudis d’enginyeria del disseny

L’estructura curricular d’aquests estudis potencia competències transversals i específiques per a l’activitat projectual, en la generació de productes industrials, així com les capacitats creatives i innovadores. Per aconseguir aquestes competències, les diferents assignatures de cada curs estan interrelacionades amb les assignatures de projectes, on el grau de complexitat va creixent a mesura que avancen els cursos. Com objectiu principal proposem que l’estudiant arribi al final de l’assignatura amb dos projectes ben definits, on ha d’haver aplicat de manera satisfactòria els coneixements adquirits a les altres assignatures

Experience in introduction of English terminology in engineering lessons: methodology and evaluation

This communication explains a experience for the introduction of English terminology in a technical degree of higher education. We present the methodology and assessment procedures used to evaluate the way the students perceived the introduction of terminology in English in two different subjects from 3rd and 5th year courses of a Computer Science degree in which English was not the vehicular language. We propose a strategy based on two main pillars, namely: 1) The design of materials, explanations, and exams, paying particular attention to the way in which the specific terminology was exposed to the students, and 2) The assessment of the impact in the students by means of the analysis of the feedback trough a set of enquiries. Our experience showed that the students responded very positively to the introduction of English terminology, and presented an affirmative feedback about the impact that an improvement of their linguistic abilities would have in their future work. Further, we present statistics regarding the use of English as the vehicular language for technical reports, which is envisaged as very useful by the students. Finally, we propose a set of questions for further debate which are centered in the role that English terminology should pay in technical degrees, and about the way in which universities should deploy resources in English languages within the different Syllabus

Cost information in engineering design -Potentials and limitations of activity-based costing

The purpose of this thesis is to analyse activity-based costing (ABC) and possible modified versions ofit in engineering design context. The design engineers need cost information attheir decision-making level and the cost information should also have a strong future orientation. These demands are high because traditional management accounting has concentrated on the direct actual costs of the products. However, cost accounting has progressed as ABC was introduced late 1980s and adopted widely bycompanies in the 1990s. The ABC has been a success, but it has gained also criticism. In some cases the ambitious ABC systems have become too complex to build,use and update. This study can be called an action-oriented case study with some normative features. In this thesis theoretical concepts are assessed and allowed to unfold gradually through interaction with data from three cases. The theoretical starting points are ABC and theory of engineering design process (chapter2). Concepts and research results from these theoretical approaches are summarized in two hypotheses (chapter 2.3). The hypotheses are analysed with two cases (chapter 3). After the two case analyses, the ABC part is extended to cover alsoother modern cost accounting methods, e.g. process costing and feature costing (chapter 4.1). The ideas from this second theoretical part are operationalized with the third case (chapter 4.2). The knowledge from the theory and three cases is summarized in the created framework (chapter 4.3). With the created frameworkit is possible to analyse ABC and its modifications in the engineering design context. The framework collects the factors that guide the choice of the costing method to be used in engineering design. It also illuminates the contents of various ABC-related costing methods. However, the framework needs to be further tested. On the basis of the three cases it can be said that ABC should be used cautiously when formulating cost information for engineering design. It is suitable when the manufacturing can be considered simple, or when the design engineers are not cost conscious, and in the beginning of the design process when doing adaptive or variant design. If the design engineers need cost information for the embodiment or detailed design, or if manufacturing can be considered complex, or when design engineers are cost conscious, the ABC has to be always evaluated critically.

Codeship: Financing growth: Case study and Teaching note

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Software engineering: methods, modeling and teaching

Since the emergence of software engineering in the late 1960's as a response to the software crisis, researchers throughout the world are trying to give theoretical support to this discipline. Several points of view have to be reviewed in order to complete this task. In the middle 70's Frederick Brooks Jr. coined the term "silver bullet" suggesting the solution to several problems rela-ted to software engineering and, hence, we adopted such a metaphor as a symbol for this book. Methods, modeling, and teaching are the insights reviewed in this book. Some work related to these topies is presented by software engineering researchers, led by Ivar Jacobson, one of the most remarkable researchers in this area. We hope our work will contribute to advance in giving the theoretieal support that software engineering needs.

Anàlisi i millora dels processos online i eliminació de les barreres d'accessibilitat i usabilitat del site d'una entitat financera

Aquest projecte se centrarà en l'anàlisi i millora dels processos online i l'eliminació de les barreres d'accessibilitat i usabilitat del site d'una entitat financera. Per al compliment d'aquest objectiu ens fixarem en el formulari de contractació d'una hipoteca.

Design, development and assessment of the Java Intelligent Tutoring System

The "Java Intelligent Tutoring System" (JITS) research project focused on designing, constructing, and determining the effectiveness of an Intelligent Tutoring System for beginner Java programming students at the postsecondary level. The participants in this research were students in the School of Applied Computing and Engineering Sciences at Sheridan College. This research involved consistently gathering input from students and instructors using JITS as it developed. The cyclic process involving designing, developing, testing, and refinement was used for the construction of JITS to ensure that it adequately meets the needs of students and instructors. The second objective in this dissertation determined the effectiveness of learning within this environment. The main findings indicate that JITS is a richly interactive ITS that engages students on Java programming problems. JITS is equipped with a sophisticated personalized feedback mechanism that models and supports each student in his/her learning style. The assessment component involved 2 main quantitative experiments to determine the effectiveness of JITS in terms of student performance. In both experiments it was determined that a statistically significant difference was achieved between the control group and the experimental group (i.e., JITS group). The main effect for Test (i.e., pre- and postiest), F( l , 35) == 119.43,p < .001, was qualified by a Test by Group interaction, F( l , 35) == 4.98,p < .05, and a Test by Time interaction, F( l , 35) == 43.82, p < .001. Similar findings were found for the second experiment; Test by Group interaction revealed F( 1 , 92) == 5.36, p < .025. In both experiments the JITS groups outperformed the corresponding control groups at posttest.

Marketing education, distance learning and hypermedia : teaching 'current issues in marketing' in a virtual campus

This article reports on a project at the Universitat Oberta de Catalunya (UOC: The Open University of Catalonia, Barcelona) to develop an innovative package of hypermedia-based learning materials for a new course entitled 'Current Issues in Marketing'. The UOC is a distance university entirely based on a virtual campus. The learning materials project was undertaken in order to benefit from the advantages which new communication technologies offer to the teaching of marketing in distance education. The article reviews the main issues involved in incorporating new technologies in learning materials, the development of the learning materials, and their functioning within the hypermedia based virtual campus of the UOC. An empirical study is then carried out in order to evaluate the attitudes of students to the project. Finally, suggestions for improving similar projects in the future are put forward.

Redefining dropping out in online higher education: a case study from the UOC

In recent years, studies into the reasons for dropping out of higher education (including online education) have been undertaken with greater regularity, parallel to the rise in the relative weight of this type of education, compared with brick-and-mortar education. However, the work invested in characterising the students who drop out of education, compared with those who do not, appears not to have had the same relevance as that invested in the analysis of the causes. The definition of dropping out is very sensitive to the context. In this article, we reach a purely empirical definition of student dropping out, based on the probability of not continuing a specific academic programme following several consecutive semesters of "theoretical break". Dropping out should be properly defined before analysing its causes, as well as comparing the drop-out rates between the different online programmes, or between online and on-campus ones. Our results show that there are significant differences among programmes, depending on their theoretical extension, but not their domain of knowledge.

Tensión Creativa aplicada al Análisis de Competencias a Alumnos de Ingeniería

This article reflects the analysis of personal and social competences through the study and analysis of creative tensión in engineering students, using a computer application called Cycloid. The main objective was to compare the students' creative tensión by asigning them the task of being the project leader of a given project: their own university major. The process consisted of evaluating, through special surveys, a group of students to know the current situation of competences, using fuzzy logic analysis. From this self-knowledge, provided by the survey, students can know their strong and weak characteristics regarding their study habits. Results showed that tolerance to stress and to language courses are the weaker points. This application is useful for the design of study strategies that students themselves can do to better face their courses

Combining Generic Programming and Service-Oriented Architectures for the Effective and Timely Development of Complex e-Learning Systems

Peer-reviewed

Impacto de la interactividad de un entorno virtual, en el fomento del aprendizaje colaborativo en la Universidad Santiago de Cali

En este estudio se analiza el impacto de la interactividad de un entorno virtual, el fomento del aprendizaje colaborativo de un grupo conformado por diez y seis (N=16) estudiantes del segundo semestre del programa de Ingeniería Industrial de la universidad Santiago de Cali. Se planteó como objetivo, establecer un foro virtual con una actividad de aprendizaje colaborativo, basada en un problema a resolver como tarea conjunta.La experiencia se desarrolló mediante un diseño de tipo exploratorio y descriptivo, enfocado en recolectar y analizar información que permitió comprender y valorar el impacto de la interactividad en el aprendizaje colaborativo de los estudiantes. Con el estudio, se apertura un espacio de discusión en torno al impacto real de las interacciones en el fomento del aprendizaje, durante la realización de tareas colaborativas de los estudiantes, utilizando el foro virtual como herramienta de apoyo.

Study and test to confirm automobile drivetrain components to improve fuel economy. Volume II: the drivetrain design process with an automatic transmission. Interim report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Graduate study and research in mechanical engineering.

Cover title.

DESIGN, SYNTHESIS AND APPLICATIONS OF FLUORESCENT AND ELECTROCHEMICAL PROBES

“Seeing is believing” the proverb well suits for fluorescent imaging probes. Since we can selectively and sensitively visualize small biomolecules, organelles such as lysosomes, neutral molecules, metal ions, anions through cellular imaging, fluorescent probes can help shed light on the physiological and pathophysiological path ways. Since these biomolecules are produced in low concentrations in the biochemical pathways, general analytical techniques either fail to detect or are not sensitive enough to differentiate the relative concentrations. During my Ph.D. study, I exploited synthetic organic techniques to design and synthesize fluorescent probes with desirable properties such as high water solubility, high sensitivity and with varying fluorescent quantum yields. I synthesized a highly water soluble BOIDPY-based turn-on fluorescent probe for endogenous nitric oxide. I also synthesized a series of cell membrane permeable near infrared (NIR) pH activatable fluorescent probes for lysosomal pH sensing. Fluorescent dyes are molecular tools for designing fluorescent bio imaging probes. This prompted me to design and synthesize a hybrid fluorescent dye with a functionalizable chlorine atom and tested the chlorine re-activity for fluorescent probe design. Carbohydrate and protein interactions are key for many biological processes, such as viral and bacterial infections, cell recognition and adhesion, and immune response. Among several analytical techniques aimed to study these interactions, electrochemical bio sensing is more efficient due to its low cost, ease of operation, and possibility for miniaturization. During my Ph.D., I synthesized mannose bearing aniline molecule which is successfully tested as electrochemical bio sensor. A Ferrocene-mannose conjugate with an anchoring group is synthesized, which can be used as a potential electrochemical biosensor.