Crossing borders through cyberspace: a discussion of a social work education electronic exchange pilot project across the Atlantic

This article discusses a trial electronic exchange project developed between social work education departments in the Republic of Ireland and the USA. It outlines the contemporary significance and challenges of integrating global content into national social work curricula, which are often strongly tied to statutory or accreditation requirements. The mechanics of the exchange are explained and critiqued in detail. An illustrative example of how the transnational students discussed two questions is analyzed. The article finds that an international electronic exchange has great potential to make global social work real to students by allowing them to cross borders through cyberspace, however it requires careful planning and attention to cultural and educational system differences.

Electronic tendering: an industry perspective

The construction industry is categorised as being an information-intensive industry and described as one of the most important industries in any developed country, facing a period of rapid and unparalleled change (Industry Science Resources 1999) (Love P.E.D., Tucker S.N. et al. 1996). Project communications are becoming increasingly complex, with a growing need and fundamental drive to collaborate electronically at project level and beyond (Olesen K. and Myers M.D. 1999; Thorpe T. and Mead S. 2001; CITE 2003). Yet, the industry is also identified as having a considerable lack of knowledge and awareness about innovative information and communication technology (ICT) and web-based communication processes, systems and solutions which may prove beneficial in the procurement, delivery and life cycle of projects (NSW Government 1998; Kajewski S. and Weippert A. 2000). The Internet has debatably revolutionised the way in which information is stored, exchanged and viewed, opening new avenues for business, which only a decade ago were deemed almost inconceivable (DCITA 1998; IIB 2002). In an attempt to put these ‘new avenues of business’ into perspective, this report provides an overall ‘snapshot’ of current public and private construction industry sector opportunities and practices in the implementation and application of web-based ICT tools, systems and processes (e-Uptake). Research found that even with a reserved uptake, the construction industry and its participating organisations are making concerted efforts (fortunately with positive results) in taking up innovative forms of doing business via the internet, including e-Tendering (making it possible to manage the entire tender letting process electronically and online) (Anumba C.J. and Ruikar K. 2002; ITCBP 2003). Furthermore, Government (often a key client within the construction industry),and with its increased tendency to transact its business electronically, undoubtedly has an effect on how various private industry consultants, contractors, suppliers, etc. do business (Murray M. 2003) – by offering a wide range of (current and anticipated) e-facilities / services, including e-Tendering (Ecommerce 2002). Overall, doing business electronically is found to have a profound impact on the way today’s construction businesses operate - streamlining existing processes, with the growth in innovative tools, such as e-Tender, offering the construction industry new responsibilities and opportunities for all parties involved (ITCBP 2003). It is therefore important that these opportunities should be accessible to as many construction industry businesses as possible (The Construction Confederation 2001). Historically, there is a considerable exchange of information between various parties during a tendering process, where accuracy and efficiency of documentation is critical. Traditionally this process is either paper-based (involving large volumes of supporting tender documentation), or via a number of stand-alone, non-compatible computer systems, usually costly to both the client and contractor. As such, having a standard electronic exchange format that allows all parties involved in an electronic tender process to access one system only via the Internet, saves both time and money, eliminates transcription errors and increases speed of bid analysis (The Construction Confederation 2001). Supporting this research project’s aims and objectives, researchers set to determine today’s construction industry ‘current state-of-play’ in relation to e-Tendering opportunities. The report also provides brief introductions to several Australian and International e-Tender systems identified during this investigation. e-Tendering, in its simplest form, is described as the electronic publishing, communicating, accessing, receiving and submitting of all tender related information and documentation via the internet, thereby replacing the traditional paper-based tender processes, and achieving a more efficient and effective business process for all parties involved (NT Governement 2000; NT Government 2000; NSW Department of Commerce 2003; NSW Government 2003). Although most of the e-Tender websites investigated at the time, maintain their tendering processes and capabilities are ‘electronic’, research shows these ‘eTendering’ systems vary from being reasonably advanced to more ‘basic’ electronic tender notification and archiving services for various industry sectors. Research also indicates an e-Tender system should have a number of basic features and capabilities, including: • All tender documentation to be distributed via a secure web-based tender system – thereby avoiding the need for collating paperwork and couriers. • The client/purchaser should be able to upload a notice and/or invitation to tender onto the system. • Notification is sent out electronically (usually via email) for suppliers to download the information and return their responses electronically (online). • During the tender period, updates and queries are exchanged through the same e-Tender system. • The client/purchaser should only be able to access the tenders after the deadline has passed. • All tender related information is held in a central database, which should be easily searchable and fully audited, with all activities recorded. • It is essential that tender documents are not read or submitted by unauthorised parties. • Users of the e-Tender system are to be properly identified and registered via controlled access. In simple terms, security has to be as good as if not better than a manual tender process. Data is to be encrypted and users authenticated by means such as digital signatures, electronic certificates or smartcards. • All parties must be assured that no 'undetected' alterations can be made to any tender. • The tenderer should be able to amend the bid right up to the deadline – whilst the client/purchaser cannot obtain access until the submission deadline has passed. • The e-Tender system may also include features such as a database of service providers with spreadsheet-based pricing schedules, which can make it easier for a potential tenderer to electronically prepare and analyse a tender. Research indicates the efficiency of an e-Tender process is well supported internationally, with a significant number, yet similar, e-Tender benefits identified during this investigation. Both construction industry and Government participants generally agree that the implementation of an automated e-Tendering process or system enhances the overall quality, timeliness and cost-effectiveness of a tender process, and provides a more streamlined method of receiving, managing, and submitting tender documents than the traditional paper-based process. On the other hand, whilst there are undoubtedly many more barriers challenging the successful implementation and adoption of an e-Tendering system or process, researchers have also identified a range of challenges and perceptions that seem to hinder the uptake of this innovative approach to tendering electronically. A central concern seems to be that of security - when industry organisations have to use the Internet for electronic information transfer. As a result, when it comes to e-Tendering, industry participants insist these innovative tendering systems are developed to ensure the utmost security and integrity. Finally, if Australian organisations continue to explore the competitive ‘dynamics’ of the construction industry, without realising the current and future, trends and benefits of adopting innovative processes, such as e-Tendering, it will limit their globalising opportunities to expand into overseas markets and allow the continuation of international firms successfully entering local markets. As such, researchers believe increased knowledge, awareness and successful implementation of innovative systems and processes raises great expectations regarding their contribution towards ‘stimulating’ the globalisation of electronic procurement activities, and improving overall business and project performances throughout the construction industry sectors and overall marketplace (NSW Government 2002; Harty C. 2003; Murray M. 2003; Pietroforte R. 2003). Achieving the successful integration of an innovative e-Tender solution with an existing / traditional process can be a complex, and if not done correctly, could lead to failure (Bourn J. 2002).

Design of multiunit electronic exchanges through decomposition

In this paper, we exploit the idea of decomposition to match buyers and sellers in an electronic exchange for trading large volumes of homogeneous goods, where the buyers and sellers specify marginal-decreasing piecewise constant price curves to capture volume discounts. Such exchanges are relevant for automated trading in many e-business applications. The problem of determining winners and Vickrey prices in such exchanges is known to have a worst-case complexity equal to that of as many as (1 + m + n) NP-hard problems, where m is the number of buyers and n is the number of sellers. Our method proposes the overall exchange problem to be solved as two separate and simpler problems: 1) forward auction and 2) reverse auction, which turns out to be generalized knapsack problems. In the proposed approach, we first determine the quantity of units to be traded between the sellers and the buyers using fast heuristics developed by us. Next, we solve a forward auction and a reverse auction using fully polynomial time approximation schemes available in the literature. The proposed approach has worst-case polynomial time complexity. and our experimentation shows that the approach produces good quality solutions to the problem. Note to Practitioners- In recent times, electronic marketplaces have provided an efficient way for businesses and consumers to trade goods and services. The use of innovative mechanisms and algorithms has made it possible to improve the efficiency of electronic marketplaces by enabling optimization of revenues for the marketplace and of utilities for the buyers and sellers. In this paper, we look at single-item, multiunit electronic exchanges. These are electronic marketplaces where buyers submit bids and sellers ask for multiple units of a single item. We allow buyers and sellers to specify volume discounts using suitable functions. Such exchanges are relevant for high-volume business-to-business trading of standard products, such as silicon wafers, very large-scale integrated chips, desktops, telecommunications equipment, commoditized goods, etc. The problem of determining winners and prices in such exchanges is known to involve solving many NP-hard problems. Our paper exploits the familiar idea of decomposition, uses certain algorithms from the literature, and develops two fast heuristics to solve the problem in a near optimal way in worst-case polynomial time.

Electronic and magnetic structure of LaMnO3 from hybrid periodic density-functional theory

The electronic and magnetic structures of the LaMnO3 compound have been studied by means of periodic calculations within the framework of spin polarized hybrid density-functional theory. In order to quantify the role of approximations to electronic exchange and correlation three different hybrid functionals have been used which mix nonlocal Fock and local Dirac-Slater exchange. Periodic Hartree-Fock results are also reported for comparative purposes. The A-antiferromagnetic ground state is properly predicted by all methods including Hartree-Fock exchange. In general, the different hybrid methods provide a rather accurate description of the band gap and of the two magnetic coupling constants, strongly suggesting that the corresponding description of the electronic structure is also accurate. An important conclusion emerging from this study is that the nature of the occupied states near the Fermi level is intermediate between the Hartree-Fock and local density approximation descriptions with a comparable participation of both Mn and O states.

Synthesis, crystal structures and magnetic behavior of two 3D coordination polymers using N-(4/3-arboxyphenyl)iminodiacetic acids as bridging ligands

Research on structure and magnetic properties of polynuclear metal complexes to understand the structural and chemical factors governing the electronic exchange coupling mediated by multi-atom bridging ligands is of growing interest. Hydrothermal treatment of Ni(NO3)(2)center dot 6H(2)O with N-(4-carboxyphenyl)iminodiacetic acid N-4(H(3)CPIDA)] at 150 degrees C yielded a 3D coordination polymer of general formula Ni-3{N-4( CPIDA)}(2)(H2O)(3)]center dot 6H(2)O (1). An analogous network of general formula Co-3{N-3(CPIDA)}(2)(H2O)(3)]center dot 3H(2)O (2) was synthesized using N-(3-carboxyphenyl) iminodiacetic acid N-3(H(3)CPIDA)] in combination with Co(NO3)(2)center dot 6H(2)O under identical reaction condition. Both the complexes contain trinuclear secondary building unit, and crystallized in monoclinic system with space groups C2/c (1) and P2(1)/c (2), respectively. Variable temperature magnetic characterization of these complexes in the temperature range of 2-300 K indicated the presence of overall ferromagnetic and antiferromagnetic behavior for 1 and 2, respectively. Density functional theory calculations (B3LYP functional) were performed for further insight on the trinuclear units to provide a qualitative theoretical interpretation on the overall magnetic behavior of the complexes 1 and 2. (C) 2010 Elsevier B.V. All rights reserved.

Modelagem do padrão TISS por meio do enfoque dual da Fundação openEHR

Em 2005, a Agência Nacional de Saúde Suplementar (ANS) estabelece o padrão TISS (Troca de Informação na Saúde Suplementar), intercâmbio eletrônico obrigatório entre as operadoras de planos de saúde (cerca de 1500 registradas na ANS) e prestadores de serviços (cerca de 200 mil) sobre os eventos de assistência prestados aos beneficiários. O padrão TISS foi desenvolvido seguindo a estrutura do Comitê ISO/TC215 de padrões para informática em saúde e se divide em quatro partes: conteúdo e estrutura, que compreende a estrutura das guias em papel; representação de conceitos em saúde, que se refere às tabelas de domínio e vocabulários em saúde; comunicação, que contempla as mensagens eletrônicas; e segurança e privacidade, seguindo recomendação do Conselho Federal de Medicina (CFM). Para aprimorar sua metodologia de evolução, essa presente tese analisou o grau de interoperabilidade do padrão TISS segundo a norma ISO 20514 (ISO 20514, 2005) e a luz do modelo dual da Fundação openEHR, que propõe padrões abertos para arquitetura e estrutura do Registro Eletrônico de Saúde (RES). O modelo dual da Fundação openEHR é composto, no primeiro nível, por um modelo de referência genérico e, no segundo, por um modelo de arquétipos, onde se detalham os conceitos e atributos. Dois estudos foram realizados: o primeiro se refere a um conjunto de arquétipos demográficos elaborados como proposta de representação da informação demográfica em saúde, baseado no modelo de referência da Fundação openEHR. O segundo estudo propõe um modelo de referência genérico, como aprimoramento das especificações da Fundação openEHR, para representar o conceito de submissão de autorização e contas na saúde, assim como um conjunto de arquétipos. Por fim, uma nova arquitetura para construção do padrão TISS é proposta, tendo como base o modelo dual da Fundação openEHR e como horizonte a evolução para o RES centrado no paciente

The many-particle scattering system He++ on He: Experiment and a complete unified description

Highly differential experimental results of the scattering system He++ on He at 30 keV are presented as well as a complete unified theoretical description where excitation, transfer and ionization are treated simultaneously on an ab initio level. The agreement even for highly differential cross sections is nearly complete although no explicit correlation besides Pauli correlation is included in the calculations.

Medidas de la eficacia de los sistemas de intercambio electrónico de datos basados en la especificación ASD 2000M

La Especificación Aeroespacial y de Defensa 2000M, también conocida como S2000M, es un protocolo de intercambio electrónico de datos utilizado en el apoyo logístico de equipos de defensa. La S2000M, resultado de un trabajo conjunto entre Fuerzas Armadas (FFAA) y empresas de Naciones diversas desarrollado durante las últimas cuatro décadas, define tanto los procesos para la adquisición y mantenimiento de componentes militares, como los mensajes normalizados en apoyo de dichos procesos. Equipos de trabajo constituidos por representantes de las citadas FFAA e industria mantienen actualizada la S2000M, por lo que el protocolo evoluciona continuamente con objeto de adaptarse a las necesidades que puedan surgir. Como consecuencia de dicha actualización, existen diversas versiones de la S2000M actualmente en servicio, y este trabajo se basa en la versión denominada 2.1, si bien, una parte importante de las conclusiones del estudio pueden aplicarse a otras versiones del protocolo. A través de los años, la S2000M se ha convertido en un elemento esencial del comercio electrónico de piezas de repuesto y de servicios de mantenimiento y reparación de modernos sistemas aeronáuticos Europeos tales como los aviones de combate Typhoon, Tornado y Rafale, el avion de transporte A400M y los helicópteros NH90 y Tiger, por lo que la S2000M constituye un elemento esencial en el apoyo logístico necesario para asegurar la disponibilidad operativa de dichos sistemas. Así mismo, la S2000M juega un papel fundamental en el comercio electrónico entre las principales empresas aeronáuticas europeas y las organizaciones logísticas de defensa de Naciones tales como Alemania, España, Francia, Holanda, Italia, etc. En consecuencia, la importancia de la S2000M en aspectos tales como logística, nivel de operatividad de los sistemas de armas mencionados, comercio electrónico y sistemas de información es manifiesta, por lo que resulta necesario evaluar la eficacia y eficiencia del protocolo para optimizarlo al máximo. Con este propósito, el presente trabajo estudia la S2000M con objeto de encontrar una respuesta a la pregunta que ha constituido la base de la investigación: ¿Cómo medir el éxito de la Especificación Aeroespacial y de Defensa S2000M? Como la S2000M se utiliza para intercambiar información logística en formato electrónico entre organizaciones y entidades por medio de documentos estructurados y de procesos automatizados, los sistemas de información juegan un papel fundamental en este trabajo. En consecuencia, la base teoríca para tratar de responder a la pregunta anteriormente citada se sustenta en las investigaciones en curso sobre el éxito de los sistemas de información, adaptadas a la problemática específica del protocolo S2000M. Para finalizar, es importante mencionar que debido a que la investigación sobre la S2000M es prácticamente inexistente, este trabajo se centra en un área específica de conocimiento hasta ahora casi inexplorada. El resultado de la investigación se materializa en una serie de propuestas teoricas y prácticas con las que se contribuyen al desarrollo de tres áreas de conocimiento: S2000M, Sistemas de Información e Intercambio Electrónico de Datos. Asimismo, se proponen nuevas áreas de estudio en las tres áreas mencionadas. ABSTRAC The Aerospace and Defence Specification 2000M, in short S2000M, is an Electronic Data Interchange (EDI) standard used in the logistic support of defence equipment. The S2000M is the result of the joint effort undertaken by the Armed Forces and industry of several Nations over the last four decades. The protocol defines the business processes for the supply, maintenance and repair of military components, as well as the standard messages on support of the said processes. Representatives from industry and military keep the S2000M up-to-date and therefore, the protocol evolves continuously to support new requirements that may arise. Consequently, there are different versions of the standard currently available and this study is about one of them, precisely, Revision 2.1; however, many of the research outcomes are also be valid for other versions of the protocol. Through the years, the S2000M has become an essential element for the electronic trade of spare parts and repair services on support of modern European aeronautical systems such as the fighters Typhoon, Tornado and Rafale, the airlifter A400M and the helicopters NH90 and Tiger. As a result, the S2000M is at the center of the logistic support required to ensure the operational availability of these systems. Further, the protocol plays a key role in the electronic exchanges among main European aeronautical players and defence logistics organizations from Nations such as France, Germany, Italy, Netherlands, Spain, etc. Therefore, the significance of the S2000M on the operational availability of the mentioned weapon systems, and in logistics, electronic business and Information Systems (IS) terms is noticeable, and it is then worth evaluating how the S2000M is doing with respect to its effectiveness and efficiency in order to improve these two areas as much as possible. To this end, this work analyzes the S2000M with the aim to find a response to the following research question: How to measure the success of the Aerospace and Defence Specification 2000M? As in the end the S2000M is about the electronic exchange of logistics information among organizations and firms by means of standard messages and processes automation, IS are at the core of this dissertation. For that reason, the theoretical foundation to tackle the research question rests on the ongoing stream of research on IS success, which will be extended to take into consideration the S2000M standpoint as well. Last, it is worth noting that due to the practically inexistent research on the S2000M M, this investigation help filling a gap in this domain. The outcomes from this study materialize in a number of conceptual and practical proposals that contribute to the theory and practice on three main knowledge areas, that is, S2000M, IS and EDI. Further, this work opens the door for further research in the said or related fields.

Exchange design patterns for electronic intermediairies

Intermediaries have introduced electronic services with varying success. One of the problems an intermediary faces is deciding what kind of exchange service it should offer to its customers and suppliers. For example, should it only provide a catalogue or should it also enable customers to order products? Developing the right exchange design is a complex undertaking because of the many design options on the one hand and the interests of multiple actors to be considered on the other. This is far more difficult than simple prescriptions like ‘creating a win-win situation’ suggest. We address this problem by developing design patterns for the exchanges between customers, intermediary, and suppliers related to role, linkage, transparency, and ovelty choices. For developing these design patterns, we studied four distinct electronic intermediaries and dentified exchange design choices that require trade-offs relating to the interests of customers, intermediary, and suppliers. The exchange design patterns contribute to the development of design theory for electronic intermediaries by filling a gap between basic business models and detailed business process designs.

Electronic and magnetic properties of Ti(2)O(3), Cr(2)O(3), and Fe(2)O(3) calculated by the screened exchange hybrid density functional.

The electronic and magnetic properties of the transition metal sesqui-oxides Cr(2)O(3), Ti(2)O(3), and Fe(2)O(3) have been calculated using the screened exchange (sX) hybrid density functional. This functional is found to give a band structure, bandgap, and magnetic moment in better agreement with experiment than the local density approximation (LDA) or the LDA+U methods. Ti(2)O(3) is found to be a spin-paired insulator with a bandgap of 0.22 eV in the Ti d orbitals. Cr(2)O(3) in its anti-ferromagnetic phase is an intermediate charge transfer Mott-Hubbard insulator with an indirect bandgap of 3.31 eV. Fe(2)O(3), with anti-ferromagnetic order, is found to be a wide bandgap charge transfer semiconductor with a 2.41 eV gap. Interestingly sX outperforms the HSE functional for the bandgaps of these oxides.

Arsenic speciation by ion-exchange chromatography with on- line determination by hydride generation: electronic modification of the D.C. plasma by photon counting

A method using L-cysteine for the determination of arsenous acid (As(III)), arsenic acid (As(V)), monomethylarsonic acid (MMAA), and dimethylarsinic acid (DMAA) by hydride generation was demonstrated. The instrument used was a d.c. plasma atomic emission spectrometer (OCP-AES). Complete recovery was reported for As(III), As(V), and DMAA while 86% recovery was reported for MMAA. Detection limits were determined, as arsenic for the species listed previously, to be 1.2, 0.8, 1.1, and 1.0 ngemL-l, respectively. Precision values, at 50 ngemL-1 arsenic concentration, were f.80/0, 2.50/0, 2.6% and 2.6% relative standard deviation, respectively. The L-cysteine reagent was compared directly with the conventional hydride generation technique which uses a potassium iodide-hydrochloric acid medium. Recoveries using L-cysteine when compared with the conventional method provided the following results: similar recoveries were obtained for As(III), slightly better recoveries were obtained for As(V) and MMAA, and significantly better recoveries for DMAA. In addition, tall and sharp peak shapes were observed for all four species when using L-cysteine. The arsenic speciation method involved separation by ion exchange .. high perfonnance liquid chromatography (HPLC) with on-line hydride generation using the L.. cysteine reagent and measurement byOCP-AES. Total analysis time per sample was 12 min while the time between the start of subsequent runs was approximately 20 min. A binary . gradient elution program, which incorporated the following two eluents: 0.01 and 0.5 mM tri.. sodium citrate both containing 5% methanol (v/v) and both at a pH of approximately 9, was used during the separation by HPLC. Recoveries of the four species which were measured as peak area, and were normalized against As(III), were 880/0, 290/0, and 40% for DMAA, MMAA and As(V), respectively. Resolution factors between adjacent analyte peaks of As(III) and DMAA was 1.1; DMAA and MMAA was 1.3; and MMAA and As(V) was 8.6. During the arsenic speciation study, signals from the d.c. plasma optical system were measured using a new photon-signal integrating device. The_new photon integrator developed and built in this laboratory was based on a previously published design which was further modified to reflect current available hardware. This photon integrator was interfaced to a personal computer through an AID convertor. The .photon integrator has adjustable threshold settings and an adjustable post-gain device.