Sistema de iluminação eficiente utilizando a tecnologia LED para espaços públicos interiores

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

VLC oriented energy efficient driver techniques

LEDs are substituting fluorescent and incandescent bulbs as illumination sources due to their low power consumption and long lifetime. Visible Light Communications (VLC) makes use of the LEDs short switching times to transmit information. Although LEDs switching speed is around Mbps range, higher speeds (hundred of Mbps) can be reached by using high bandwidth-efficiency modulation techniques. However, the use of these techniques requires a more complex driver which elevates drastically its power consumption. In this work an energy efficiency analysis of the different VLC modulation techniques and drivers is presented. Besides, the design of new schemes of VLC drivers is described.

Caracterización de LEDs mediante el uso y programación de espectrómetro

En la búsqueda de dispositivos cada vez más eficientes, de larga duración y bajo coste de mantenimiento en el mundo de la iluminación, aparecen los LEDs. Estos pequeños dispositivos van poco a poco sustituyendo a las bombillas tradicionales de incandescencia, tomando un papel cada vez más importante entre las fuentes de iluminación. Las primeras funciones prácticas que tuvieron estos LEDs fueron como indicadores, y sus primeros usos fueron en pantallas de calculadoras, electrodomésticos, etcétera, y más adelante, con el desarrollo de nuevos materiales, se empezaron a utilizar como dispositivos de iluminación. Ha sido en estos últimos años cuando se ha producido un salto cuantitativo gracias a la aparición de los POWER LED (LEDs de potencia) o de alto brillo, que son los que han permitido ampliar el uso de estos dispositivos como fuentes de iluminación en, por ejemplo, hogares, alumbrado público, e incluso llegando a sustituir los faros halógenos de vehículos por iluminación LED en algunos modelos. Es por ello que mientras su potencia lumínica va aumentado, su rango de utilización también lo hace. Para caracterizar estas fuentes lumínicas y otras a las que se les pueden dar diferentes usos, se desarrolla este proyecto mediante el análisis de su espectro. Para ello, además, se hará un análisis del resto de instrumentación necesaria que forma parte del proyecto. Este análisis abarca el estudio del propio espectrómetro tanto a nivel de hardware como de software, que modificaremos según los intereses del proyecto. También se estudiará la fibra óptica y el driver para controlar los dispositivos LEDs de potencia, así como los propios LEDs. Para ello se medirán las características de estos LEDs y se compararán con las facilitadas por el fabricante. ABSTRACT. Searching for more efficient, long lasting an low-maintenance devices in lighting world, LEDs appear. These small devices are gradually replacing traditional incandescent bulbs. LEDs are taking an increasingly important role between the light sources. At the begining they were only used as indicators and their first use were in screens calculators, appliances, etc., and later, with the development of new materials, were progressively used as lighting devices. Nowadays a great development has happened in LED lighting with the apparition of the POWER LED or high bright. Power LEDs are allowed to extend the use of these devices as lighting sources for example for homes, street lighting, and even coming to replace halogen headlights LED lighting in vehicles of some models. That's the reason the more their lighting power increases the more their use increases too. The aim of this project is to characterize these light sources and others that can be given different uses by analyzing its spectrum. Moreover, necessary instruments will also be analysed. This study involves both hardware and software spectrometer analysis itself by modifying its software according to the interests of the project. Furthermore, optical fiber and the driver to control LED power devices will be studied by measuring LEDs characteristics and comparing with those provided by the manufacturer.

Vehicle and driver attributes affecting distance from the steering wheel in motor vehicles

The current study was designed to confirm that female drivers sit closer to the steering wheel than do male drivers and to investigate whether this expected difference in sitting position is attributable to differences in the physical dimensions of men and women. Driver body dimensions and multiple measures of sitting distance from the steering wheel were collected from a sample of 150 men and 150 women. The results confirmed that on average, women sit closer to the steering wheel than men do and that this difference is accounted for by variations in body dimensions, especially height. This result suggests that driver height may provide a good surrogate for sitting distance from the steering wheel when investigating the role of driver position in real-world crash outcomes. The potential applications of this research include change to vehicle design that allows independent adjustment of the relative distance among the driver's seat, the steering wheel, and the floor pedals.

An agent-based approach to modelling driver route choice behaviour under the influence of real-time information

This paper presents an agent-based approach to modelling individual driver behaviour under the influence of real-time traffic information. The driver behaviour models developed in this study are based on a behavioural survey of drivers which was conducted on a congested commuting corridor in Brisbane, Australia. Commuters' responses to travel information were analysed and a number of discrete choice models were developed to determine the factors influencing drivers' behaviour and their propensity to change route and adjust travel patterns. Based on the results obtained from the behavioural survey, the agent behaviour parameters which define driver characteristics, knowledge and preferences were identified and their values determined. A case study implementing a simple agent-based route choice decision model within a microscopic traffic simulation tool is also presented. Driver-vehicle units (DVUs) were modelled as autonomous software components that can each be assigned a set of goals to achieve and a database of knowledge comprising certain beliefs, intentions and preferences concerning the driving task. Each DVU provided route choice decision-making capabilities, based on perception of its environment, that were similar to the described intentions of the driver it represented. The case study clearly demonstrated the feasibility of the approach and the potential to develop more complex driver behavioural dynamics based on the belief-desire-intention agent architecture. (C) 2002 Elsevier Science Ltd. All rights reserved.

A compact shock-assisted free-piston driver for impulse facilities

A free-piston driver that employs entropy-raising shock processes with diaphragm rupture has been constructed, which promises significant theoretical advantages over isentropic compression. Results from a range of conditions with helium and argon driver gases are reported. Significant performance gains were achieved in some test cases. Heat losses are shown to have a strong effect on driver processes. Measurements compare well with predictions from a quasi-one-dimensional numerical code.

Estudo de viabilidade de utilização de VLC em infra-estruturas ITS baseadas em semáforos rodoviários a LEDs

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Using an LED as a sensor and visible light communication device in a smart illumination system

The need for more efficient illumination systems has led to the proliferation of Solid-State Lighting (SSL) systems, which offer optimized power consumption. SSL systems are comprised of LED devices which are intrinsically fast devices and permit very fast light modulation. This, along with the congestion of the radio frequency spectrum has paved the path for the emergence of Visible Light Communication (VLC) systems. VLC uses free space to convey information by using light modulation. Notwithstanding, as VLC systems proliferate and cost competitiveness ensues, there are two important aspects to be considered. State-of-the-art VLC implementations use power demanding PAs, and thus it is important to investigate if regular, existent Switched-Mode Power Supply (SMPS) circuits can be adapted for VLC use. A 28 W buck regulator was implemented using a off-the-shelf LED Driver integrated circuit, using both series and parallel dimming techniques. Results show that optical clock frequencies up to 500 kHz are achievable without any major modification besides adequate component sizing. The use of an LED as a sensor was investigated, in a short-range, low-data-rate perspective. Results show successful communication in an LED-to-LED configuration, with enhanced range when using LED strings as sensors. Besides, LEDs present spectral selective sensitivity, which makes them good contenders for a multi-colour LED-to-LED system, such as in the use of RGB displays and lamps. Ultimately, the present work shows evidence that LEDs can be used as a dual-purpose device, enabling not only illumination, but also bi-directional data communication.

Digital interconnectivity as a driver for port and logistics competitiveness

Creating an innovative tool that takes advantage of digital interconnectivity between shipping agencies and husbandry services suppliers was the starting point. But the main purpose of this paper is to figure out if that represents a business opportunity. It describes the preliminary stages undertaken, as the connections with the main potential providers of the husbandry services. This was carried out as a qualitative research, based on interviews given by shipping agencies that contributed as a source of data about their activities but also to survey their acceptance of the concept that could change the way of doing business in this area.At the same time, inquiries have been made to build financial scenarios that show the costs and revenue streams allocated to this project. Considering the data collected from the main players in husbandry services and the different outcomes, the feasibility of this project is assessed. Even though the paradigm was well received by all the firms contacted, the development costs turn out to be the main threat to the project so further steps are advised.

Electric vehicle assistant based in driver profile

This paper presents the outcomes of a research work consisting in the development of an Electric Vehicle Assistant (EVA), which creates and stores a driver profile where are contained the driving behaviours related with the EV energy consumption, the EV battery charging information, and the performed routes. This is an application for mobile devices that is able to passively track the driver behaviour and to access several information related with the EV in real time. It is also proposed a range prediction approach based on probability to take into account unpredictable effects of personal driving style, traffic or weather.

Epitaxial growth and properties of AlGaN-based UV-LEDs on Si(111) substrates

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2010

Visual recognition systems in a car passenger compartment with the focus on facial driver identification

Magdeburg, Univ., Fak. für Informatik, Diss., 2014

Compliment de les directrius DRIVER dels repositoris cooperatius RACO, RECERCAT i TDX

Aquest informe ha estat elaborat per encàrrec del Consorci de Biblioteques Universitàries de Catalunya (CBUC). El seu objectiu és comprovar si des del punt de vista tècnic, els repositoris cooperatius que el CBUC coordina juntament amb el Centre de Supercomputació de Catalunya (CESCA), es poden integrar dins la infrastructura DRIVER.