Bus driver training simulator assessment. Final report.

Urban Mass Transportation Administration, Washington, D.C.

A low-cost, easy-to-use, real-time power system simulator

We present the design rationale and basic workings of a low-cost, easy-to-use power system simulator developed to support investigations into human interface design for a hydropower plant. The power system simulator is based on three important components: models of power system components, a data repository, and human interface elements. Dynamic Data Exchange (DDE) allows simulator components to communicate with each other within the simulator. To construct the modules of the simulator we have combined the advantages of commercial software such as Matlab/Simulink, ActiveX Control, Visual Basic and Excel and integrated them in the simulator. An important advantage of our approach is that further components of the simulator now can be developed independently. An initial assessment of the simulator indicates it is fit for intended purpose.

排爆作业机器人模拟训练系统研究

介绍了一种排爆机器人模拟训练系统.该系统提供了友好的人机交互界面,使操作人员可以进行各种模拟训练,并提高操作水平.重点介绍了该模拟训练系统的体系结构及关键实现技术,包括排爆机器人及其工作环境的建模方法、机器人运动学和动力学简化模型、碰撞检测和技能评定等.通过实验,证明了该模拟训练系统的可行性和有效性.

Fatal impact? The effects of emotional arousal and weapon presence on police officers' memories for a simulated crime

Purpose. (1) To investigate the effects of emotional arousal and weapon presence on the completeness and accuracy of police officers' memories; and (2) to better simulate the experience of witnessing a shooting and providing testimony. Methods. A firearms training simulator was used to present 70 experienced police officers with either a shooting or a domestic dispute scenario containing no weapons. Arousal was measured using both self-report and physiological indices. Recall for event details was tested after a 10-minute delay using a structured interview. Identification accuracy was assessed with a photographic line-up. Results. Self-report measures confirmed that the shooting induced greater arousal than did the other scenario. Overall, officers' memories for the event were less complete, but more accurate, when they had witnessed the shooting. The recall and line-up data did not support a weapon focus effect. Conclusions. Police officers' recall performance can be affected both qualitatively and quantitatively by witnessing an arousing event such as a shooting.

A heuristic model for the simulation of the deformation of elastic and spongy material for virtual reality applications

This paper presents a practical algorithm for the simulation of interactive deformation in a 3D polygonal mesh model. The algorithm combines the conventional simulation of deformation using a spring-mass-damping model, solved by explicit numerical integration, with a set of heuristics to describe certain features of the transient behaviour, to increase the speed and stability of solution. In particular, this algorithm was designed to be used in the simulation of synthetic environments where it is necessary to model realistically, in real time, the effect on non-rigid surfaces being touched, pushed, pulled or squashed. Such objects can be solid or hollow, and have plastic, elastic or fabric-like properties. The algorithm is presented in an integrated form including collision detection and adaptive refinement so that it may be used in a self-contained way as part of a simulation loop to include human interface devices that capture data and render a realistic stereoscopic image in real time. The algorithm is designed to be used with polygonal mesh models representing complex topology, such as the human anatomy in a virtual-surgery training simulator. The paper evaluates the model behaviour qualitatively and then concludes with some examples of the use of the algorithm.

Impacto en el entrenamiento con simuladores de laparoscopia dentro del programa de Cirugía General-Universidad del Rosario

Introducción: La cirugía laparoscópica ocupa un lugar privilegiado dentro de la cirugía mínimamente invasiva, brindando al paciente y a las instituciones hospitalarias importantes beneficios comparados con la cirugía convencional. Los cirujanos en formación deben contar con un entrenamiento adecuado en cirugía laparoscópica basado en simuladores previo a la práctica con pacientes, disminuyendo la morbimortalidad derivada de la curva de aprendizaje. Este estudio busca describir e identificar los cambios en habilidades y tiempos quirúrgicos antes y después del entrenamiento con simulador de bajo costo y simulador virtual. Metodología: Se realizó un seudoexperimento (antes y después) con 20 residentes de los cuales 18 completaron el estudio, quienes recibieron un entrenamiento dirigido para la realización de procedimientos por vía laparoscópica en simuladores. El análisis estadístico se realiza mediante un análisis uni y bivariado, y se determina la significancia estadística con la medición de X2 y prueba exacta de Fisher así como la prueba T Student para muestras emparejadas y Wilcoxon para las variables numéricas. Resultados: El simulador de bajo costo muestra dependencia en la variable de manejo de tejidos en el ejercicio 3 y 10, con valores de p=0.035, y p=0.028 respectivamente. El 60% de los ejercicios muestra una diferencia estadísticamente significativa en el tiempo empleado en las pruebas. Para simulador virtual, todos los ejercicios mostraron diferencias significativas en al menos una de las variables evaluadas. Conclusiones: El entrenamiento, tanto con el simulador de bajo costo como con el simulador virtual, mejora las habilidades quirúrgicas necesarias para la realización de un procedimiento laparoscópico.

Metodología para el desarrollo de un sistema de visualización multi-proyector con características cromáticas uniformes

Los sistemas de proyección multi-proyector han adquirido gran popularidad en los últimos años para su uso en un amplio rango de aplicaciones como sistemas de realidad virtual, simuladores y visualización de datos. Esto es debido a que normalmente estas aplicaciones necesitan representar sus datos a muy alta resolución y a lo largo de una gran superficie. Este tipo de sistemas de proyección son baratos en comparación con las resoluciones que pueden conseguir, se pueden configurar para proyectar sobre prácticamente cualquier tipo de superficie, sea cual sea su forma, y son fácilmente escalables. Sin embargo, para hacer que este tipo de sistemas generen una imagen sin discontinuidades geométricas o colorimétricas requieren de un ajuste preciso. En la presente tesis se analizan en detalle todos los problemas a los que hay que enfrentarse a la hora de diseñar y calibrar un sistema de proyección de este tipo y se propone una metodología con una serie de optimizaciones para hacer el ajuste de estos sistemas más sencillo y rápido. Los resultados de esta metodología se muestran aplicados a la salida gráfica de un simulador de entrenamiento. Multi-projector display systems have gained high popularity over the past years for its use in a wide range of applications such as virtual reality systems, simulators or data visualization where a high resolution image over a large projection surface is required. Such systems are cheap for the resolutions they can provide, can be configured to project images on almost any kind of screen shapes and are easily scalable, but in order to provide a seamless image with no photometric discontinuities they require a precise geometric and colour correction. In this thesis, we analyze all the problems that have to be faced in order to design and calibrate a multi-projector display. We propose a calibration methodology with some optimizations that make the adjustment of this kind of displays easier and faster. The results of the implementation of this methodology on a training simulator are presented and discussed

A multilingual audiometer simulator software for training purposes

A set of algorithms, which allows a computer to determine the answers of simulated patients during pure tone and speech audiometry, is presented. Based on these algorithms, a computer program for training in audiometry was written and found to be useful for teaching purposes.

Simulator training on pulsatile vascular models significantly improves surgical skills and the quality of carotid patch plasty

Vascular surgeons perform numerous highly sophisticated and delicate procedures. Due to restrictions in training time and the advent of endovascular techniques, new concepts including alternative environments for training and assessment of surgical skills are required. Over the past decade, training on simulators and synthetic models has become more sophisticated and lifelike. This study was designed to evaluate the impact of a 3-day intense training course in open vascular surgery on both specific and global vascular surgical skills.

Education and Training of Future Nuclear Engineers Through the use of an Interactive Plant Simulator

The successful experience of the Jose Cabrera Nuclear Power Plant Interactive Graphical Simulator implementation in the Nuclear Engineering Department in the Universidad Polite´cnica de Madrid, for the Education and Training of nuclear engineers is shown in this paper. The paper starts with the objectives and the description of the Simulator Aula, and the methodology of work following the recommendations of the IAEA for the use of nuclear reactor simulators for education. The practices and material prepared for the students, as well as the operational and accident situations simulated are provided.

Instructor training institute for NHTSA curriculum package: emergency medical technician-dispatcher. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Training program for emergency medical technician: dispatcher. Instructor lesson plans.

Mode of access: Internet.

Training program for emergency medical technician: dispatcher. Student study guide.

Mode of access: Internet.