Background interference on the color of dental composite materials with different thickness by digital contrast

In this work the color dependence of resin composites with the background color was evaluated. The objective was to measure since what thickness the color of the sample stops being influenced by the color of the background over which the resin is placed and the methodology used in experiment was based in analyzing the contrast of digital images of the sample over a black background. The results shown that since 0.8 mm the images contrast becomes almost constant; it prove that since this thickness the color of resin composite depends on the optical resin properties only. The experiment was repeated under three conditions of luminosity to evaluate the influence of it on the image contrast and the results obtained were identical.

Comparison of contrast-enhanced multi-station MR angiography and digital subtraction angiography of the lower extremity arterial disease

PURPOSE: To compare diagnostic accuracy of multi-station, high-spatial resolution contrast-enhanced MR angiography (CE-MRA) of the lower extremities with digital subtraction angiography (DSA) as the reference standard in patients with symptomatic peripheral arterial occlusive disease. MATERIALS AND METHODS: Of 485 consecutive patients undergoing a run-off CE-MRA, 152 patients (86 male, 66 female; mean age, 71.6 years) with suspected peripheral arterial occlusive disease were included into our Institutional Review Board approved study. All patients underwent MRA and DSA of the lower extremities within 30 days. MRA was performed at 1.5 Tesla with a single bolus of 0.1 mmol/kg body weight of gadobutrol administered at a rate of 2.0 mL/s at three stations. Two readers evaluated the MRA images independently for stenosis grade and image quality. Sensitivity and specificity were derived. RESULTS: Sensitivity and specificity ranged from 73% to 93% and 64% to 89% and were highest in the thigh area. Both readers showed comparable results. Evaluation of good and better quality MRAs resulted in a considerable improvement in diagnostic accuracy. CONCLUSION: Contrast-enhanced MRA demonstrates good sensitivity and specificity in the investigation of the vasculature of the lower extremities. While a minor investigator experience dependence remains, it is standardizable and shows good inter-observer agreement. Our results confirm that the administration of Gadobutrol at a standard dose of 0.1 mmol/kg for contrast-enhanced runoff MRA is able to detect hemodynamically relevant stenoses. Use of contrast-enhanced MRA as an alternative to intra-arterial DSA in the evaluation and therapeutic planning of patients with suspected peripheral arterial occlusive disease is well justified. J. Magn. Reson. Imaging 2013;37:1427-1435. © 2012 Wiley Periodicals, Inc.

A study of entrepreneurship : Taiwanese digital content companies in China

China’s accession to the World Trade Organisation (WTO) has greatly enhanced global interest in investment in the Chinese media market, where demand for digital content is growing rapidly. The East Asian region is positioned as a growth area in many forms of digital content and digital service industries. China is attempting to catch up and take its place as a production centre to offset challenges from neighbouring countries. Meanwhile, Taiwan is seeking to use China both as an export market and as a production site for its digital content. This research investigates entry strategies of Taiwanese digital content firms into the Chinese market. By examining the strategies of a sample of Taiwan-based companies, this study also explores the evolution of their market strategies. However, the focus is on how distinctive business practices such as guanxi are important to Taiwanese business and to relations with Mainland China. This research examines how entrepreneurs manage the characteristics of digital content products and in turn how digital content entrepreneurs adapt to changing market circumstances. This project selected five Taiwan-based digital content companies that have business operations in China: Wang Film, Artkey, CnYES, Somode and iPartment. The study involved a field trip, undertaken between November 2006 and March 2007 to Shanghai and Taiwan to conduct interviews and to gather documentation and archival reports. Six senior managers and nine experts were interviewed. Data were analysed according to Miller’s firm-level entrepreneurship theory, foreign direct investment theory, Life Cycle Model and guanxi philosophy. Most studies of SMEs have focused on free market (capitalist) environments. In contrast, this thesis examines how Taiwanese digital content firms’ strategies apply in the Chinese market. I identified three main types of business strategy: cost-reduction, innovation and quality-enhancement; and four categories of functional strategies: product, marketing, resource acquisition and organizational restructuring. In this study, I introduce the concept of ‘entrepreneurial guanxi’, special relationships that imply mutual obligation, assurance and understanding to secure and exchange favors in entrepreneurial activities. While guanxi is a feature of many studies of business in Pan-Chinese society, it plays an important mediating role in digital content industries. In this thesis, I integrate the ‘Life Cycle Model’ with the dynamic concept of strategy. I outline the significant differences in the evolution of strategy between two types of digital content companies: off-line firms (Wang Film and Artkey) and web-based firms (CnYES, Somode and iPartment). Off-line digital content firms tended to adopt ‘resource acquisition strategies’ in their initial stages and ‘marketing strategies’ in second and subsequent stages. In contrast, web-based digital content companies mainly adopted product and marketing strategies in the early stages, and would adopt innovative approaches towards product and marketing strategies in the whole process of their business development. Some web-based digital content companies also adopted organizational restructuring strategies in the final stage. Finally, I propose the ‘Taxonomy Matrix of Entrepreneurial Strategies’ to emphasise the two dimensions of this matrix: innovation, and the firm’s resource acquisition for entrepreneurial strategy. This matrix is divided into four cells: Effective, Bounded, Conservative, and Impoverished.

National guidelines for digital modelling

These National Guidelines and Case Studies for Digital Modelling are the outcomes from one of a number of Building Information Modelling (BIM)-related projects undertaken by the CRC for Construction Innovation. Since the CRC opened its doors in 2001, the industry has seen a rapid increase in interest in BIM, and widening adoption. These guidelines and case studies are thus very timely, as the industry moves to model-based working and starts to share models in a new context called integrated practice. Governments, both federal and state, and in New Zealand are starting to outline the role they might take, so that in contrast to the adoption of 2D CAD in the early 90s, we ensure that a national, industry-wide benefit results from this new paradigm of working. Section 1 of the guidelines give us an overview of BIM: how it affects our current mode of working, what we need to do to move to fully collaborative model-based facility development. The role of open standards such as IFC is described as a mechanism to support new processes, and make the extensive design and construction information available to asset operators and managers. Digital collaboration modes, types of models, levels of detail, object properties and model management complete this section. It will be relevant for owners, managers and project leaders as well as direct users of BIM. Section 2 provides recommendations and guides for key areas of model creation and development, and the move to simulation and performance measurement. These are the more practical parts of the guidelines developed for design professionals, BIM managers, technical staff and ‘in the field’ workers. The guidelines are supported by six case studies including a summary of lessons learnt about implementing BIM in Australian building projects. A key aspect of these publications is the identification of a number of important industry actions: the need for BIM-compatible product information and a national context for classifying product data; the need for an industry agreement and setting process-for-process definition; and finally, the need to ensure a national standard for sharing data between all of the participants in the facility-development process.

National guidelines for digital modelling : case studies

These National Guidelines and Case Studies for Digital Modelling are the outcomes from one of a number of Building Information Modelling (BIM)-related projects undertaken by the CRC for Construction Innovation. Since the CRC opened its doors in 2001, the industry has seen a rapid increase in interest in BIM, and widening adoption. These guidelines and case studies are thus very timely, as the industry moves to model-based working and starts to share models in a new context called integrated practice. Governments, both federal and state, and in New Zealand are starting to outline the role they might take, so that in contrast to the adoption of 2D CAD in the early 90s, we ensure that a national, industry-wide benefit results from this new paradigm of working. Section 1 of the guidelines give us an overview of BIM: how it affects our current mode of working, what we need to do to move to fully collaborative model-based facility development. The role of open standards such as IFC is described as a mechanism to support new processes, and make the extensive design and construction information available to asset operators and managers. Digital collaboration modes, types of models, levels of detail, object properties and model management complete this section. It will be relevant for owners, managers and project leaders as well as direct users of BIM. Section 2 provides recommendations and guides for key areas of model creation and development, and the move to simulation and performance measurement. These are the more practical parts of the guidelines developed for design professionals, BIM managers, technical staff and ‘in the field’ workers. The guidelines are supported by six case studies including a summary of lessons learnt about implementing BIM in Australian building projects. A key aspect of these publications is the identification of a number of important industry actions: the need for BIMcompatible product information and a national context for classifying product data; the need for an industry agreement and setting process-for-process definition; and finally, the need to ensure a national standard for sharing data between all of the participants in the facility-development process.

Country of Origin and Internet Publication : Applying the Berne Convention in the Digital Age

Historically, determining the country of origin of a published work presented few challenges, because works were generally published physically – whether in print or otherwise – in a distinct location or few locations. However, publishing opportunities presented by new technologies mean that we now live in a world of simultaneous publication – works that are first published online are published simultaneously to every country in world in which there is Internet connectivity. While this is certainly advantageous for the dissemination and impact of information and creative works, it creates potential complications under the Berne Convention for the Protection of Literary and Artistic Works (“Berne Convention”), an international intellectual property agreement to which most countries in the world now subscribe. Under the Berne Convention’s national treatment provisions, rights accorded to foreign copyright works may not be subject to any formality, such as registration requirements (although member countries are free to impose formalities in relation to domestic copyright works). In Kernel Records Oy v. Timothy Mosley p/k/a Timbaland, et al. however, the Florida Southern District Court of the United States ruled that first publication of a work on the Internet via an Australian website constituted “simultaneous publication all over the world,” and therefore rendered the work a “United States work” under the definition in section 101 of the U.S. Copyright Act, subjecting the work to registration formality under section 411. This ruling is in sharp contrast with an earlier decision delivered by the Delaware District Court in Håkan Moberg v. 33T LLC, et al. which arrived at an opposite conclusion. The conflicting rulings of the U.S. courts reveal the problems posed by new forms of publishing online and demonstrate a compelling need for further harmonization between the Berne Convention, domestic laws and the practical realities of digital publishing. In this article, we argue that even if a work first published online can be considered to be simultaneously published all over the world it does not follow that any country can assert itself as the “country of origin” of the work for the purpose of imposing domestic copyright formalities. More specifically, we argue that the meaning of “United States work” under the U.S. Copyright Act should be interpreted in line with the presumption against extraterritorial application of domestic law to limit its application to only those works with a real and substantial connection to the United States. There are gaps in the Berne Convention’s articulation of “country of origin” which provide scope for judicial interpretation, at a national level, of the most pragmatic way forward in reconciling the goals of the Berne Convention with the practical requirements of domestic law. We believe that the uncertainties arising under the Berne Convention created by new forms of online publishing can be resolved at a national level by the sensible application of principles of statutory interpretation by the courts. While at the international level we may need a clearer consensus on what amounts to “simultaneous publication” in the digital age, state practice may mean that we do not yet need to explore textual changes to the Berne Convention.

Digital technologies and musical participation for people with intellectual disabilities

Research on the aspirations of people with intellectual disabilities documents the importance of alternative zones of inclusion where they can assert their own definitions of ability and normality. This stands in contrast to assumptions concerning technology and disability that position technology as ‘normalising’ the disabled body. This paper reports on the role of a digital music jamming tool in providing access to creative practice by people with intellectual disabilities. The tool contributed to the development of a spatio-temporal zone to enable aesthetic agency within and beyond the contexts of deinstitutionalised care. The research identifies the interactions among tools, individuals and groups that facilitated participants’ agency in shaping the form of musical practice. Further, we document the properties of emergent interaction - supported by a tool oriented to enabling music improvisation - as potentially resisting assumptions regarding normalisation.

Digital literacies: Understanding the literate practices of refugee kids in an Afterschool Media Club

Since the 2000s, teachers in an increasing number of Australian schools have been learning how to support students with refugee backgrounds. For some of these students, entry into the Australian school system is not easy. English literacy is integral to some of the challenges confronting the students. In response, educators have been developing and researching ways of engaging with the students’ language and literacy learning. Much of the focus has been on traditional print-based school literacies. In contrast, I look here at student engagement in digital literacies in an after-school media club. Several concepts from the theory of French sociologist, Pierre Bourdieu are useful for understanding the position of students of refugee background in the Australian school system. Like other conflict theories, Bourdieusian theory has sometimes been criticised as ‘pessimistic’, that is, for suggesting that schools necessarily reproduce social disadvantage. However, others have used Bourdieusian theory to analyse and critique the reproductive work of schooling for groups of students who experience educational disadvantage. I align myself with this latter tradition. Specifically, I use Bourdieu’s triad of concepts to explain aspects of the literacy education experiences of some young people of refugee background: field, capital and habitus. In particular, I look at questions of the legitimation of students’ competences as capital in literate fields within and beyond the school context. Data are drawn from an Australian Research Council-funded project, Digital Learning and Print Literacy: A design experiment for the reform of low socio-economic, culturally diverse schools (2009-14). The data analysed in this chapter include interviews and observations relating to the participation of two Congolese girls in an after school media club. Implications are drawn for teachers of literacy in culturally and linguistically diverse contexts. Consideration is made of early childhood, primary and secondary settings.

Re-theorizing the “digital divide”: Identifying dimensions of social exclusion in contemporary media technologies

The digital divide is the disparancy in access to information, in the ability to communicate, and in the capacity to make information and communication serve full participation in the information society. Indeed, the conversation about the digital divide has developed over the last decade from a focus on connectivity and access to information and communication technologies, to a conversation that encompasses the ability to use them and to the utility that usage provides (Wei et al., 2011). However, this conversation, while transitioning from technology to the skills of the people that use them and to the fruits of their use is limited in its ability to take into account the social role of information and communication technologies (ICTs). One successful attempt in conceptualizing the social impact of the differences in access to and utilization of digital communication technologies, was developed by van Dijk (2005) whose sequential model for analyzing the divide states that: 1. Categorical inequalities in society produce an unequal distribution of resources; 2. An unequal distribution of resources causes unequal access to digital technologies; 3. Unequal access to digital technologies also depends on the characteristics of these technologies; 4. Unequal access to digital technologies brings about unequal participation in society; 5. Unequal participation in society reinforces categorical inequalities and unequal distributions of resources.” (p. 15) As van Dijk’s model demonstrates, the divide’s impact is the exclusion of individuals from participation. Still left to be defined are the “categorical inequalities,” the “resources,” the “characteristics of digital technologies,” and the different levels of “access” that result in differentiated levels of participation, as these change over time due to the evolving nature of technology and the dynamics of society. And most importantly, the meaning of “participation” in contemporary society needs to be determined as it is differentiated levels of participation that are the result of the divide and the engine of the ever-growing disparities. Our argument is structured in the following manner: We first claim that contemporary digital media differ from the previous generation of ICTs along four dimensions: They offer an abundance of information resources and communication channels when compared to the relative paucity of both in the past; they offer mobility as opposed to the stationary nature of their predecessors; they are interactive in that they provide users with the capability to design their own media environments in contrast to the dictated environs of previous architectures; and, they allow users to communicate utilizing multi forms of mediation, unlike the uniformity of sound or word that limited users in the past. We then submit that involvement in the information society calls for egalitarian access to all four dimensions of the user experience that make contemporary media different from their predecessors and that the ability to experience all four affects the levels in which humans partake in the shaping of society. The model being cyclical, we then discuss how lower levels of participation contribute to the enhancement of social inequalities. Finally, we discuss why participation is needed in order to achieve full membership in the information society and what political philosophy should govern policy solutions targeting the re-inclusion of those digitally excluded.

Country of Origin and Internet Publication: Applying the Berne Convention in the Digital Age

Historically, determining the country of origin of a published work presented few challenges, because works were generally published physically – whether in print or otherwise – in a distinct location or few locations. However, publishing opportunities presented by new technologies mean that we now live in a world of simultaneous publication – works that are first published online are published simultaneously to every country in world in which there is Internet connectivity. While this is certainly advantageous for the dissemination and impact of information and creative works, it creates potential complications under the Berne Convention for the Protection of Literary and Artistic Works (“Berne Convention”), an international intellectual property agreement to which most countries in the world now subscribe. Under the Berne Convention’s national treatment provisions, rights accorded to foreign copyright works may not be subject to any formality, such as registration requirements (although member countries are free to impose formalities in relation to domestic copyright works). In Kernel Records Oy v. Timothy Mosley p/k/a Timbaland, et al. however, the Florida Southern District Court of the United States ruled that first publication of a work on the Internet via an Australian website constituted “simultaneous publication all over the world,” and therefore rendered the work a “United States work” under the definition in section 101 of the U.S. Copyright Act, subjecting the work to registration formality under section 411. This ruling is in sharp contrast with an earlier decision delivered by the Delaware District Court in Håkan Moberg v. 33T LLC, et al. which arrived at an opposite conclusion. The conflicting rulings of the U.S. courts reveal the problems posed by new forms of publishing online and demonstrate a compelling need for further harmonization between the Berne Convention, domestic laws and the practical realities of digital publishing. In this chapter, we argue that even if a work first published online can be considered to be simultaneously published all over the world it does not follow that any country can assert itself as the “country of origin” of the work for the purpose of imposing domestic copyright formalities. More specifically, we argue that the meaning of “United States work” under the U.S. Copyright Act should be interpreted in line with the presumption against extraterritorial application of domestic law to limit its application to only those works with a real and substantial connection to the United States. There are gaps in the Berne Convention’s articulation of “country of origin” which provide scope for judicial interpretation, at a national level, of the most pragmatic way forward in reconciling the goals of the Berne Convention with the practical requirements of domestic law. We believe that the uncertainties arising under the Berne Convention created by new forms of online publishing can be resolved at a national level by the sensible application of principles of statutory interpretation by the courts. While at the international level we may need a clearer consensus on what amounts to “simultaneous publication” in the digital age, state practice may mean that we do not yet need to explore textual changes to the Berne Convention.

Estimation of Aboveground Phytomass of Plantations Using Digital Photogrammetry and High Resolution Remote Sensing Data

The study follows an approach to estimate phytomass using recent techniques of remote sensing and digital photogrammetry. It involved tree inventory of forest plantations in Bhakra forest range of Nainital district. Panchromatic stereo dataset of Cartosat-1 was evaluated for mean stand height retrieval. Texture analysis and tree-tops detection analyses were done on Quick-Bird PAN data. The composite texture image of mean, variance and contrast with a 5x5 pixel window was found best to separate tree crowns for assessment of crown areas. Tree tops count obtained by local maxima filtering was found to be 83.4 % efficient with an RMSE+/-13 for 35 sample plots. The predicted phytomass ranged from 27.01 to 35.08 t/ha in the case of Eucalyptus sp. while in the case of Tectona grandis from 26.52 to 156 t/ha. The correlation between observed and predicted phytomass in Eucalyptus sp. was 0.468 with an RMSE of 5.12. However, the phytomass predicted in Tectona grandis was fairly strong with R-2=0.65 and RMSE of 9.89 as there was no undergrowth and the crowns were clearly visible. Results of the study show the potential of Cartosat-1 derived DSM and Quick-Bird texture image for the estimation of stand height, stem diameter, tree count and phytomass of important timber species.

Report on Knowledge Exchange workshop Price of keeping knowledge: financial streams for digital preservation

In contrast to cost modeling activities, the pricing of services must be simple and transparent. Calculating and thus knowing price structures, would not only help identify the level of detail required for cost modeling of individual instititutions, but also help develop a ”public” market for services as well as clarify the division of task and the modeling of funding and revenue streams for data preservation of public institutions. This workshop has built on the results from the workshop ”The Costs and Benefits of Keeping Knowledge” which took place 11 June 2012 in Copenhagen. This expert workshop aimed at: •Identifying ways for data repositories to abstract from their complicated cost structures and arrive at one transparent pricing structure which can be aligned with available and plausible funding schemes. Those repositories will probably need a stable institutional funding stream for data management and preservation. Are there any estimates for this, absolute or as percentage of overall cost? Part of the revenue will probably have to come through data management fees upon ingest. How could that be priced? Per dataset, per GB or as a percentage of research cost? Will it be necessary to charge access prices, as they contradict the open science paradigm? •What are the price components for pricing individual services, which prices are currently being paid e.g. to commercial providers? What are the description and conditions of the service(s) delivered and guaranteed? •What types of risks are inherent in these pricing schemes? •How can services and prices be defined in an all-inclusive and simple manner, so as to enable researchers to apply for specific amount when asking for funding of data-intensive projects?Please

Quantitative measurement of domain inversion in RuO2 : LiNbO3 crystal by digital holographic interferometry

We quantitatively study the domain inversion in a RuO2:LiNbO3 crystal wafer by the digital holographic interferometry. The crystal wafer is placed into one arm of a Mach-Zehnder-type interferometer to record a series of holograms. Making use of the angular spectrum backward propagation algorithm, we reconstruct the optical wave field in the crystal plane. The extracted phase difference from the reconstructed optical wave field is a well linear function of the applied external voltage. We deduce that the linear electro-optic coefficient of the detected RuO2:LiNbO3 crystal sample is 9.1x10(-12) m/V. An unexpected phase contrast at the antiparallel domain wall is observed and the influence of the applied external voltage on it is studied in detail. Also the built-in internal field is quantitatively measured as 0.72 kV/mm. (c) 2006 American Institute of Physics.