Analysis of support for modularity in object teams based on design patterns

Dissertação de Mestrado em Engenharia Informática

A qualitative assessment of modularity in CaesarJ components based on implementations of design patterns

Tese de Mestrado em Engenharia Informática

Design Patterns in EPOC Software Development

Työssä tutkittiin oliosuunnittelumalleja EPOC-käyttöjärjestelmässä. Työssä tutkittiin sekä yleisiä suunnittelumalleja että EPOC-ympäristössä esiintyviä oliorakenteita, niiden aiheuttamia vaatimuksia sovelluksille sekä niiden käyttämisestä saatavia hyötyjä. Työssä toteutettiin EPOC-ohjelmiston suunnittelu hyödyntäen suunnittelumalleja ja periaatteita. Oliosuunnittelumallit ovat yleistyneet huomattavasti viime vuosina. Suunnittelumallien lähtökohtana ovat sekä yleiset että ympäristökohtaiset suunnitteluperiaatteet ja säännöt. Suunnittelumallit ovat osa isompaa rakennekokonaisuutta, joka käsittää sekä prosessi-, analyysi-, arkkitehtuuri- ym. malleja. Oliosuunnittelumallit nopeuttavat ja helpottavat suunnittelua sekä parantavat uudelleenkäytettävyyttä korkeammalla abstraktiotasolla. EPOC on tulevaisuuden mobiililaitteiden yleisimpiä käyttöjärjestelmiä. EPOC on kokonaisuudessaan oliopohjainen ja sisältää lukuisia oliorakenteita, joiden ymmärtäminen on sovelluskehityksen kannalta elintärkeää. Koska ympäristöt, joissa EPOC-käyttöjärjestelmää käytetään, ovat yleensä resurssien puolesta rajoittuneita, on yleisten suunnittelumallien käytössä oltava tarkkana. EPOC vaatii yleisiin suunnittelumalleihin muutoksia ja estää joidenkin käytön kokonaan.

Identification of behavioral and creational design patterns through dynamic analysis

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Design patterns for promoting peer interaction in discussion forums in MOOCs

Design patterns are a way of sharing evidence-based solutions to educational design problems. The design patterns presented in this paper were produced through a series of workshops, which aimed to identify Massive Open Online Course (MOOC) design principles from workshop participants’ experiences of designing, teaching and learning on these courses. MOOCs present a challenge for the existing pedagogy of online learning, particularly as it relates to promoting peer interaction and discussion. MOOC cohort sizes, participation patterns and diversity of learners mean that discussions can remain superficial, become difficult to navigate, or never develop beyond isolated posts. In addition, MOOC platforms may not provide sufficient tools to support moderation. This paper draws on four case studies of designing and teaching on a range of MOOCs presenting seven design narratives relating to the experience in these MOOCs. Evidence presented in the narratives is abstracted in the form of three design patterns created through a collaborative process using techniques similar to those used in collective autoethnography. The patterns: “Special Interest Discussions”, “Celebrity Touch” and “Look and Engage”, draw together shared lessons and present possible solutions to the problem of creating, managing and facilitating meaningful discussion in MOOCs through the careful use of staged learning activities and facilitation strategies.

O impacto da utilização de design patterns nas métricas e estimativas de projetos de software: a utilização de padrões tem alguma influência nas estimativas?

VALENTIM, R. A. M. ; SOUZA NETO, Plácido Antônio de. O impacto da utilização de design patterns nas métricas e estimativas de projetos de software: a utilização de padrões tem alguma influência nas estimativas?. Revista da FARN, Natal, v. 4, p. 63-74, 2006

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Discrete Event Systems based Design Patterns for Diagnosability Analysis of Automated Manufacturing Systems

The main goal of this thesis is to facilitate the process of industrial automated systems development applying formal methods to ensure the reliability of systems. A new formulation of distributed diagnosability problem in terms of Discrete Event Systems theory and automata framework is presented, which is then used to enforce the desired property of the system, rather then just verifying it. This approach tackles the state explosion problem with modeling patterns and new algorithms, aimed for verification of diagnosability property in the context of the distributed diagnosability problem. The concepts are validated with a newly developed software tool.

Design Patterns in Software Maintenance: An Experiment Replication at UPM - Experiences with the RESER'11 Joint Replication Project

Replication of software engineering experiments is crucial for dealing with validity threats to experiments in this area. Even though the empirical software engineering community is aware of the importance of replication, the replication rate is still very low. The RESER'11 Joint Replication Project aims to tackle this problem by simultaneously running a series of several replications of the same experiment. In this article, we report the results of the replication run at the Universidad Politécnica de Madrid. Our results are inconsistent with the original experiment. However, we have identified possible causes for them. We also discuss our experiences (in terms of pros and cons) during the replication.

Using integrated metamodeling to define OO design patterns with object-z and UML

Three important goals in describing software design patterns are: generality, precision, and understandability. To address these goals, this paper presents an integrated approach to specifying patterns using Object-Z and UML. To achieve the generality goal, we adopt a role-based metamodeling approach to define patterns. With this approach, each pattern is defined as a pattern role model. To achieve precision, we formalize role concepts using Object-Z (a role metamodel) and use these concepts to define patterns (pattern role models). To achieve understandability, we represent the role metamodel and pattern role models visually using UML. Our pattern role models provide a precise basis for pattern-based model transformations or refactoring approaches.