Estudo cinético da degradação térmica e catalítica de petróleo pesado usando Al-MCM-41

The mesoporous nanostructured materials have been studied for application in the oil industry, in particular Al-MCM-41, due to the surface area around 800 to 1.000 m2 g-1 and, pore diameters ranging from 2 to 10 nm, suitable for catalysis to large molecules such as heavy oil. The MCM-41 has been synthesized by hydrothermal method, on which aluminum was added, in the ratio Si/Al equal to 50, to increase the generation of active acid sites in the nanotubes. The catalyst was characterized by X-ray diffraction (XRD), surface area by the BET method and, the average pore volume BJH method using the N2 adsorption, absorption spectroscopy in the infrared Fourier Transform (FT-IR) and determination of surface acidity with application of a probe molecule - n-butylamine. The catalyst showed well-defined structural properties and consistent with the literature. The overall objective was to test the Al-MCM-41 as catalyst and thermogravimetric perform tests, using two samples of heavy oil with API º equal to 14.0 and 18.5. Assays were performed using a temperature range of 30-900 ° C and heating ratios (β) ranging from 5, 10 and 20 °C min-1.The aim was to verify the thermogravimetric profiles of these oils when subjected to the action of the catalyst Al- MCM-41. Therefore, the percentage ranged catalyst applied 1, 3, 5, 10 and 20 wt%, and from the TG data were applied two different kinetic models: Ozawa-Flynn-Wall (OFW) and Kissinger-Akahrira-Sunose (KAS).The apparent activation energies found for both models had similar values and were lower for the second event of mass loss known as cracking zone, indicating a more effective performance of Al-MCM-41 in that area. Furthermore, there was a more pronounced reduction in the value of activation energy for between 10 and 20% by weight of the oil-catalyst mixture. It was concluded that the Al-MCM-41 catalyst has applicability in heavy oils to reduce the apparent activation energy of a catalyst-oil system, and the best result with 20% by weight of Al-MCM-41

Degradação térmica e catalítica do resíduo atmosférico de petróleo (RAT), utilizando materiais nanoestruturados do tipo SBA-15

In this work were synthesized and characterized the materials mesoporous SBA-15 and Al- SBA-15, Si / Al = 25, 50 and 75, discovered by researchers at the University of California- Santa Barbara, USA, with pore diameters ranging from 2 to 30 nm and wall thickness from 3.1 to 6.4 nm, making these promising materials in the field of catalysis, particularly for petroleum refining (catalytic cracking), as their mesopores facilitate access of the molecules constituting the oil to active sites, thereby increasing the production of hydrocarbons in the range of light and medium. To verify that the materials used as catalysts were successfully synthesized, they were characterized using techniques of X-ray diffraction (XRD), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). Aiming to check the catalytic activity thereof, a sample of atmospheric residue oil (ATR) from the pole Guamaré-RN was performed the process by means of thermogravimetry and thermal degradation of catalytic residue. Upon the curves, it was observed a reduction in the onset temperature of the decomposition process of catalytic ATR. For the kinetic model proposed by Flynn-Wall yielded some parameters to determine the apparent activation energy of decomposition, being shown the efficiency of mesoporous materials, since there was a decrease in the activation energy for the reactions using catalysts. The ATR was also subjected to pyrolysis process using a pyrolyzer with gas chromatography coupled to a mass spectrometer. Through the chromatograms obtained, there was an increase in the yield of the compounds in the range of gasoline and diesel from the catalytic pyrolysis, with emphasis on Al-SBA-15 (Si / Al = 25), which showed a percentage higher than the other catalysts. These results are due to the fact that the synthesized materials exhibit specific properties for application in the process of pyrolysis of complex molecules and high molecular weight as constituents of the ATR

Pirólise térmica e catalítica de resíduos plásticos

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Influência da dessilicação de zeólitos na pirólise catalítica do polietileno

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Parâmetros cinéticos da degradação térmica de complexos entre percloratos de terras raras com lactama

Complexos de percloratos à base de terras raras com a 2-azaciclononanona (AZA) foram obtidos a partir da reação entre os respectivos sais hidratados com a AZA (proporção molar 1:8) pelo método de difusão de vapor e caracterizados por titulação complexiométrica com EDTA, microanálise (CHN), espectroscopia vibracional na região do IV, termogravimetria em atmosfera de ar e N2 e calorimetria exploratória diferencial (DSC) em atmosfera de N2. O estudo cinético desse trabalho foi realizado utilizando um software em QBASIC que faz a simulação dos dados termogravimétricos a partir de um conjunto dado de parâmetros cinéticos.

Estudo da degradação térmica da madeira de Eucalyptus através de termogravimetria e calorimetria

O objetivo deste trabalho foi avaliar a degradação térmica da madeira de diferentes clones de Eucalyptus, por meio de análises termogravimétrica (TG/DTG) e de calorimetria exploratória diferencial (DSC), estabelecendo-se suas relações com a produção de carvão vegetal. Foram utilizados seis clones de Eucalyptus spp. aos 7,5 anos de idade, provenientes de um teste clonal pertencente a uma empresa florestal. Foram realizadas as análises TG/DTG e DSC, sob atmosfera de gás nitrogênio. As curvas TG/DTG mostraram três faixas de degradação térmica, atribuídas à secagem da madeira e à degradação de hemiceluloses e celulose. Não foi detectada faixa específica de degradação de lignina. As curvas DSC evidenciaram um pico endotérmico entre as temperaturas de 50 e 100 ºC, o que pode ser atribuído à perda de água da madeira. A liberação de calor iniciou-se em temperaturas acima de 275 ºC, para todos os clones avaliados, sendo observados dois picos exotérmicos. As análises térmicas da madeira (TG/DTG e DSC) não apresentaram variações expressivas entre os clones. Conclui-se que, através das técnicas estudadas, é possível identificar as principais fases das reações de liberação ou absorção de energia e perda de massa, que estão diretamente ligadas à qualidade do carvão vegetal.

Estudo de degradação térmica e caracterização de lodos provenientes de diferentes sistemas de tratamento de esgotos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Monitoramento da degradação térmica de óleo mineral isolante de transformador utilizando espectroscopia de absorção e fluorescência UV-Vis

Pós-graduação em Engenharia Elétrica - FEIS

Aplicação de zeólitos e outros catalisadores ácidos para a produção de combustíveis líquidos a partir de plásticos recicláveis

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Química e Bioquímica

Aplicação de zeólitos e outros catalisadores ácidos para a produção de combustíveis líquidos a partir de plásticos recicláveis

Dissertação para a obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Cracking catalítico de resíduos plásticos

No presente trabalho foram realizadas análises à degradação térmica e catalítica do polietileno de alta densidade (PEAD), de resíduos plásticos de cabos eléctricos e do hidrocarboneto n-C50. Analisou-se, ainda, a influência do n-C50 na degradação catalítica dos resíduos de cabos eléctricos, variando as proporções da mistura cabos/C50. Para isso, usaram-se simultaneamente as técnicas de Termogravimetria (TGA) e Calorimetria Diferencial de Varrimento (DSC), sob atmosfera inerte. No estudo em causa utilizou-se o zeólito ZSM-5 como catalisador de partida. Posteriormente submeteu-se o zeólito a tratamentos de dessilicação, variando a concentração da solução básica empregue durante o tratamento alcalino. Procedeu-se à caracterização textural dos zeólitos através da adsorção de azoto, e à caracterização da acidez pela técnica de termodessorção a temperatura programada. Averiguou-se o efeito da dessilicação dos zeólitos na pirólise catalítica do PEAD, resíduos de cabos eléctricos e C50. Verificou-se que a dessilicação conduziu a um aumento da mesoporosidade e da área de superfície externa, sem ocorrerem alterações significativas na microporosidade. O tratamento de dessilicação dos zeólitos conduziu a um aumento da sua actividade durante a pirólise catalítica dos resíduos de cabos eléctricos e do n-C50, diminuindo a temperatura de degradação catalítica dos mesmos. Constatou-se que a presença de hidrocarboneto baixou a temperatura de degradação catalítica dos resíduos de cabos eléctricos, melhorando a actividade do zeólito. Analogamente os resíduos de cabos eléctricos também aceleraram a degradação catalítica do n-C50, isto é, o hidrocarboneto, na presença dos resíduos, inicia a sua degradação catalítica a uma temperatura inferior comparativamente a quando se encontra isolado.

Degradacao termica e catalitica da borra oleosa de Petroleo com materiais nanoestruturados al-mcm-41 e AL-SBA-15

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline