Electrochemical treatment of tannery wastewater using DSA (R) electrodes

In this work we studied the electrochemical treatment of a tannery wastewater using dimensionally stable anodes (DSA (R)) containing tin, iridium, ruthenium, and titanium. The electrodes were prepared by thermal decomposition of the polymeric precursors. The electrolyses were performed under galvanostatic conditions, at room temperature. Effects of the oxide composition, current density, and effluent conductivity were investigated, and the current efficiency was calculated as a function of the time for the performed electrolyses. Results showed that all the studied electrodes led to a decrease in the content of both total phenolic compounds and total organic carbon (TOC), as well as lower absorbance in the UV-vis region. Toxicity tests using Daphnia similis demonstrated that the electrochemical treatment reduced the wastewater toxicity. The use of DSA (R) type electrodes in the electrochemical treatment of tannery wastewater proved to be useful since it can promote a decrease in total phenolic compounds, TOC, absorbance, and toxicity. (C) 2007 Elsevier B.V. All rights reserved.

Electrooxidation of glyphosate herbicide at different DSA (R) compositions: pH, concentration and supporting electrolyte effect

This paper has investigated the electrochemical oxidation of glyphosate herbicide (GH) on RuO(2) and IrO(2) dimensionally stable anode (DSA (R)) electrodes. Electrolysis was achieved under galvanostatic control as a function of pH, GH concentration, supporting electrolyte, and current density. The influence of the oxide composition on GH degradation seems to be significant in the absence of chloride; Ti/Ir(0.30)Sn(0.70)O(2) is the best electrode material to oxidize GH. GH oxidation is favored at low pH values. The use of chloride medium increases the oxidizing power and the influence of the oxide composition is meaningless. At 30 mA cm(-2) and 4 h of electrolysis, complete GH removal from the electrolyzed solution has been obtained. In chloride medium, application of 50 mA cm(-2) leads to virtually total mineralization ( release of phosphate ions = 91%) for all the evaluated oxide materials. (C) 2008 Elsevier Ltd. All rights reserved.

Electrochemical degradation of glyphosate formulations at DSA(A (R)) anodes in chloride medium: an AOX formation study

The electrochemical degradation of different glyphosate herbicide formulations on RuO(2) and IrO(2) DSA(A (R)) electrodes is investigated. Parameters that could influence the formation of organochloride compounds during electrolysis are studied. The effects of chloride concentration, electrodic composition, current density, and electrolysis time are reported. The influence of the oxide composition on herbicide degradation seems to be almost insignificant; however, there is a straight relationship between anode composition and organic halides formation. Commercial herbicide formulations have lower degradation rates and lead to the formation of a larger quantities of organochloride compounds. In high chloride concentrations, there is a significant increase in organic mineralization, and the relationship between chloride concentration and organic halides formation is direct. Only in low chloride medium investigated the organochloride concentration obtained was below the limit values allowed in Brazil. The determination of organic halides absorbable (AOX) during electrolysis increases significantly with the applied current. Even during long-term electrolysis, a large amount of organochloride compounds is formed.

L'arrêt cardio-respiratoire (ACR) au cabinet médical est-il une réalité et y a-t-il nécessité de s'équiper d'un défribillateur semi-automatique (DSA)?

Introduction: Cette étude a pour but de déterminer la fréquence de survenue de l'arrêt cardio-respiratoire (ACR) au cabinet médical qui constitue un élément de décision quant à la justification de la présence d'un défibrillateur semi-automatique (DSA) au cabinet médical. Matériel et Méthode: Analyse rétrospective des fiches d'intervention pré-hospitalière des ambulances et des SMUR (Service Mobile d'Urgence et de Réanimation) du canton de Vaud (650'000 habitants) entre 2003 et 2006 qui relataient un ACR. Les variables suivantes ont été analysées: chronologie de l'intervention, mesures de réanimation cardio-pulmonaire (RCP) appliquées, diagnostic présumé, suivi à 48 heures. Résultats: 17 ACR (9 _, 8 _) ont eu lieu dans les 1655 cabinets médicaux du canton de Vaud en 4 ans sur un total de 1753 ACR extrahospitaliers, soit 1% de ces derniers. Tous ont motivés une intervention simultanée d'une ambulance et d'un SMUR. L'âge moyen était de 70 ans. Le délai entre l'ACR et l'arrivée sur site d'un DSA était en moyenne de plus de 10 minutes (min-max: 4-25 minutes). Dans 13 cas évaluables, une RCP était en cours à l'arrivée des renforts, mais seulement 7 étaient qualifiées d'efficaces. Le rythme initial était une fibrillation ventriculaire (FV) dans 8 cas et ont tous reçu un choc électrique externe (CEE), dont 1 avant l'arrivée des secours administré dans un cabinet équipé d'un DSA. Le diagnostic était disponible pour 9 cas: 6 cardiopathies, 1 embolie pulmonaire massive, 1 choc anaphylactique et 1 tentamen médicamenteux. Le devenir de ces patients a été marqué par 6 décès sur site, 4 décès à l'admission à l'hôpital et 7 vivants à 48 heures. Les données ne permettent pas d'avoir un suivi ni à la sortie de l'hôpital ni ultérieurement. Conclusions: Bien que la survenue d'un ACR soit très rare au cabinet médical, il mérite une anticipation particulière de la part du médecin. En effet, le délai d'arrivée des services d'urgences nécessite la mise en oeuvre immédiate de mesures par le médecin. En outre, comme professionnel de la santé, il se doit d'intégrer la chaîne de survie en procédant à une alarme précoce du 144 et initier des gestes de premier secours («Basic Life Support»). La présence d'un DSA pourrait être envisagée en fonction notamment de l'éloignement de secours professionnels équipés d'un DSA.

A multimodality vascular imaging phantom with fiducial markers visible in DSA, CTA, MRA, and ultrasound.

The objective was to design a vascular phantom compatible with digital subtraction angiography, computerized tomography angiography, ultrasound and magnetic resonance angiography (MRA). Fiducial markers were implanted at precise known locations in the phantom to facilitate identification and orientation of plane views from three-dimensional (3-D) reconstructed images. A vascular conduit connected to tubing at the extremities of the phantom ran through an agar-based gel filling it. A vessel wall in latex was included around the conduit to avoid diffusion of contrast agents. Using a lost-material casting technique based on a low melting point metal, geometries of pathological vessels were modeled. During the experimental testing, fiducial markers were detectable in all modalities without distortion. No leak of gadolinium through the vascular wall was observed on MRA after 5 hours. Moreover, no significant deformation of the vascular conduit was noted during the fabrication process (confirmed by microtome slicing along the vessel). The potential use of the phantom for calibration, rescaling, and fusion of 3-D images obtained from the different modalities as well as its use for the evaluation of intra- and inter-modality comparative studies of imaging systems are discussed. In conclusion, the vascular phantom can allow accurate calibration of radiological imaging devices based on x-ray, magnetic resonance and ultrasound and quantitative comparisons of the geometric accuracy of the vessel lumen obtained with each of these methods on a given well defined 3-D geometry.

DSA-elektrodien testaaminen kulumisen arvioimiseksi

Työn tavoitteena oli tutkia eri mittausmenetelmillä metallipinnoitettujen elektrodien kulumista kulumiskokeiden aikana. Mittausmenetelminä olivat käytössä syklinen voltammetria, polarisaatiokäyrän määritys ja sähkökemiallinen impedanssispektrometria, jotka olivat offline-mittausmenetelmiä. Näiden menetelmien avulla pystyttiin seuraamaan yksittäisten elektrodien kulumista ajon aikana. Elektrodin pinnoitteen alkuaineiden pitoisuuksia tutkittiin myös elektronimikroskoopin röntgenspektrometrin avulla. Työn aikana tehdyissä kulumiskokeista havaittiin elektrodin kuluvan sitä nopeammin mitä suurempi on virrantiheys. Työssä tehtyjen elektronimikroskooppikokeiden avulla havaittiin, että harvinaisten metallien seostaminen pinnoitteeseen pidentää metallipinnoitetun elektrodin käyttöikää. Syklisen voltammetrian avulla pystyttiin seuraamaan elektrodin pinta-alan muuttumista ajon aikana. Työssä käytettyjen kulumiskokeiden avulla ei suoranaisesti pystytty määrittämään elektrodin jäljellä olevaa elinikää.

Oxidação eletroquímica do herbicida tebutiuron utilizando eletrodo do tipo DSA

Tebuthiuron (TBH) is a herbicide widely used in different cultures and known for its toxic effects. Electrochemical methods are promising for removing pollutants such as pesticides. This study showed the degradation of TBH using a DSA® anode operated at current densities of 50 to 200 mA cm-2. Removal presented pseudo-first order kinetics while high-pressure liquid chromatography (UV detection) showed two peaks, ascribed to degradation intermediates. The maximum percentage of total organic carbon removed was 12.9%. Ion chromatography revealed that higher concentrations of nitrate and nitrite ions formed with increasing current density.

Study of photo-assisted electrochemical degradation of carbaryl at dimensionally stable anodes (DSA (R))

This paper presents the results concerning the degradation of the pesticide carbaryl comparing two methods: electrochemical (EC) and photo-assisted electrochemical (PAEC). The experimental variables of applied current density, electrolyte flow-rate and initial carbaryl concentration were investigated. The results demonstrate that the electrochemical degradation of carbaryl was greatly enhanced when simultaneous UV light was applied. The greatest difference between the PAEC and EC method was apparent when lower current densities were applied. The extent of COD removal was much enhanced for the combined method, independent of the applied current density. It should be noted that the complete removal of carbaryl was achieved with out the need to add NaCl to the reaction mixture, avoiding the risk of chlorinated organic species formation. (C) 2009 Elsevier B.V. All rights reserved.

ELECTROCHEMICAL OXIDATION OF THE HERBICIDE TEBUTHIURON USING DSA (R)-TYPE ELECTRODE

ELECTROCHEMICAL OXIDATION OF THE HERBICIDE TEBUTHIURON USING DSA (R)-TYPE ELECTRODE. Tebuthiuron (TBH) is a herbicide widely used in different cultures and known for its toxic effects. Electrochemical methods are promising for removing pollutants such as pesticides. This study showed the degradation of TBH using a DSA (R) anode operated at current densities of 50 to 200 mA cm(-2). Removal presented pseudo-first order kinetics while high-pressure liquid chromatography (UV detection) showed two peaks, ascribed to degradation intermediates. The maximum percentage of total organic carbon removed was 12.9%. Ion chromatography revealed that higher concentrations of nitrate and nitrite ions formed with increasing current density.

Oxidação eletroquímica do herbicida tebutiuron utilizando eletrodo do tipo DSA

Tebuthiuron (TBH) is a herbicide widely used in different cultures and known for its toxic effects. Electrochemical methods are promising for removing pollutants such as pesticides. This study showed the degradation of TBH using a DSA® anode operated at current densities of 50 to 200 mA cm-2. Removal presented pseudo-first order kinetics while high-pressure liquid chromatography (UV detection) showed two peaks, ascribed to degradation intermediates. The maximum percentage of total organic carbon removed was 12.9%. Ion chromatography revealed that higher concentrations of nitrate and nitrite ions formed with increasing current density.

Design and implementation of a fft pruning engine for DSA-enabled cognitive radios.

This research work presents the design and implementation of a FFT pruning block, which is an extension to the FFT core for OFDM demodulation, enabling run-time 8 pruning of the FFT algorithm, without any restrictions on the distribution pattern of the active/inactive sub-carriers. The design and implementation of FFT processor core is not the part of this work. The whole design was prototyped on an ALTERA STRATIX V FPGA to evaluate the performance of the pruning engine. Synthesis and simulation results showed that the logic overhead introduced by the pruning block is limited to a 10% of the total resources utilization. Moreover, in presence of a medium-high scattering of the sub-carriers, power and energy consumption of the FFT core were reduced by a 30% factor.

L'apprendimento cooperativo nei processi di inclusione di studenti con DSA

La tesi vuole verificare se il metodo dell'apprendimento cooperativo può essere utilizzato per facilitare l'inclusione di studenti con DSA.

Firma digitale e algoritmo DSA

La firma digitale è uno degli sviluppi più importanti della crittografia a chiave pubblica, che permette di implementarne le funzionalità di sicurezza. La crittografia a chiave pubblica, introdotta nel 1976 da Diffie ed Hellman, è stata l'unica grande rivoluzione nella storia della crittografia. Si distacca in modo radicale da ciò che l'ha preceduta, sia perché i suoi algoritmi si basano su funzioni matematiche e non su operazioni di sostituzione e permutazione, ma sopratutto perché è asimmetrica: prevede l'uso di due chiavi distinte (mentre nelle crittografia simmetrica si usa una sola chiave condivisa tra le parti). In particolare, le funzioni matematiche su cui si basa tale crittografia sono funzioni ben note nella Teoria dei Numeri: ad esempio fattorizzazione, calcolo del logaritmo discreto. La loro importanza deriva dal fatto che si ritiene che siano 'computazionalmente intrattabili' da calcolare. Dei vari schemi per la firma digitale basati sulla crittografia a chiave pubblica, si è scelto di studiare quello proposto dal NIST (National Institute of Standard and Technology): il Digital Signature Standard (DSS), spesso indicato come DSA (Digital Signature Algorithm) dal nome dell'algoritmo che utilizza. Il presente lavoro è strutturato in tre capitoli. Nel Capitolo 1 viene introdotto il concetto di logaritmo discreto (centrale nell'algoritmo DSA) e vengono mostrati alcuni algoritmi per calcolarlo. Nel Capitolo 2, dopo una panoramica sulla crittografia a chiave pubblica, si dà una definizione di firma digitale e delle sue caratteristiche. Chiude il capitolo una spiegazione di un importante strumento utilizzato negli algoritmi di firma digitale: le funzioni hash. Nel Capitolo 3, infine, si analizza nel dettaglio il DSA nelle tre fasi che lo costituiscono (inizializzazione, generazione, verifica), mostrando come il suo funzionamento e la sua sicurezza derivino dai concetti precedentemente illustrati.

MR angiography of infrapopliteal arteries in patients with peripheral arterial occlusive disease by using Gadofosveset at 3.0 T: diagnostic accuracy compared with selective DSA

To prospectively compare the diagnostic accuracy of steady-state, high-spatial-resolution magnetic resonance (MR) angiography of the lower leg, performed with a blood pool contrast agent, with selective digital subtraction angiography (DSA) as the reference standard in patients with symptomatic peripheral arterial disease.