Measurement of dental implant stability by resonance frequency analysis and damping capacity assessment: comparison of both techniques in a clinical trial

PURPOSE: Two noninvasive methods to measure dental implant stability are damping capacity assessment (Periotest) and resonance frequency analysis (Osstell). The objective of the present study was to assess the correlation of these 2 techniques in clinical use. MATERIALS AND METHODS: Implant stability of 213 clinically stable loaded and unloaded 1-stage implants in 65 patients was measured in triplicate by means of resonance frequency analysis and Periotest. Descriptive statistics as well as Pearson's, Spearman's, and intraclass correlation coefficients were calculated with SPSS 11.0.2. RESULTS: The mean values were 57.66 +/- 8.19 implant stability quotient for the resonance frequency analysis and -5.08 +/- 2.02 for the Periotest. The correlation of both measuring techniques was -0.64 (Pearson) and -0.65 (Spearman). The single-measure intraclass correlation coefficients for the ISQ and Periotest values were 0.99 and 0.88, respectively (95% CI). No significant correlation of implant length with either resonance frequency analysis or Periotest could be found. However, a significant correlation of implant diameter with both techniques was found (P < .005). The correlation of both measuring systems is moderate to good. It seems that the Periotest is more susceptible to clinical measurement variables than the Osstell device. The intraclass correlation indicated lower measurement precision for the Periotest technique. Additionally, the Periotest values differed more from the normal (Gaussian) curve of distribution than the ISQs. Both measurement techniques show a significant correlation to the implant diameter. CONCLUSION: Resonance frequency analysis appeared to be the more precise technique.

Electrocatalytic evaluation of DNA damage by superoxide radical for antioxidant capacity assessment

The integrity of DNA purine bases was herein used to evaluate the antioxidant capacity. Unlike other DNA-based antioxidant sensors reported so far, the damaging agent chosen was the O 2 radical enzymatically generated by the xanthine/xanthine oxidase system. An adenine-rich oligonucleotide was adsorbed on carbon paste electrodes and subjected to radical damage in the presence/absence of several antioxidant compounds. As a result, partial damage on DNA was observed. A minor product of the radical oxidation was identified by cyclic voltammetry as a diimine adenine derivative also formed during the electrochemical oxidation of adenine/guanine bases. The protective efficiency of several antioxidant compounds was evaluated after electrochemical oxidation of the remaining unoxidized adenine bases, by measuring the electrocatalytic current of NADH mediated by the adsorbed catalyst species generated. A comparison between O 2 and OH radicals as a source of DNA lesions and the scavenging efficiency of various antioxidant compounds against both of them is discussed. Finally, the antioxidant capacity of beverages was evaluated and compared with the results obtained with an optical method.

Incorporating Multiculturalism in Medical Decisional Capacity Assessment

As the demography of the U.S. population becomes increasingly older and culturally diverse, psychologists must develop greater multicultural competency and abilities to provide culturally and linguistically appropriate clinical services. This paper focuses on the dire need for the development of multicultural approach to medical decisional capacity evaluation. The purpose of this paper is to examine the common clinical and ethical dilemmas faced by psychologists when evaluating culturally diverse geriatric population. For instance, the lack of culturally and linguistically appropriate cognitive and functional assessment measures with sound reliability, validity, and normative properties is discussed in detail. This paper introduces possible solutions to the dilemmas and aims to ultimately contribute to increased multicultural awareness within the U.S. healthcare system.

Stability of dental implants after irradiation with an 830-nm low-level laser: a double-blind randomized clinical study

Little is known about the benefits of low-level laser therapy (LLLT) on improvement of stability of dental implants. The aim of this randomized clinical study was to assess the LLLT effect on implants stability by means of resonance frequency analysis (RFA). Thirty implants were distributed bilaterally in the posterior mandible of eight patients. At the experimental side, the implants were submitted to LLLT (830 nm, 86 mW, 92.1 J/cm(2), 0.25 J, 3 s/point, at 20 points), and on the control side, the irradiation was simulated (placebo). The first irradiation was performed in the immediate postoperative period, and it was repeated every 48 h in the first 14 days. The initial implant stability quotient (ISQ) of the implants was measured by means of RFA. New ISQ measurements were made after 10 days, 3, 6, 9, and 12 weeks. The initial ISQ values ranged from 65-84, with a mean of 76, undergoing a significant drop in stability from the 10th day to the 6th week in the irradiated group, and presenting a gradual increase from the 6th to the 12th week. The highest ISQ values were observed on the 10th day in the irradiated group, and the lowest in the 6th week in both groups. Under the conditions of this study, no evidence was found of any effect of LLLT on the stability of the implants when measured by RFA. Since high primary stability and good bone quality are of major relevancy for a rigid bone-implant interface, additional LLLT may have little impact macroscopically.

Noise and vibration damping of Fe-Cr-x alloys

The aim of the present work is to study the noise and vibration damping capacity of ferromagnetic Fe-16%Cr base alloys (before and after heat treatment) with different Al and Mo contents. The noise damping was evaluated by the level of sound emission after an impact. The vibration damping was studied using a cantilever device. In addition to these tests, the magnetic structure of the materials was also investigated by Kerr effect. It was verified that the materials can decrease noise level in the frequency range of human earring. The vibration damping is influenced by heat treatment and chemical composition of the alloy. The improvement of vibration damping after heat treatment is ascribed to the decrease of internal stresses in materials and changes in magnetic domain structures.

Assessing the adaptive capacity of the Ontario wine industry to climate change: A case study

The global wine industry is experiencing the impacts of climate change. Canada’s major wine sector, the Ontario Wine Industry (OWI) is no exception to this trend. Warmer winter and summer temperatures are affecting wine production. The industry needs to adapt to these challenges, but their capacity for this is unclear. To date, only a limited number of studies exist regarding the adaptive capacity of the wine industry to climate change. Accordingly, this study developed an adaptive capacity assessment framework for the wine industry. The OWI became the case study for the implementation of the assessment framework. Data was obtained by means of a questionnaire sent to grape growers, winemakers and supporting institutions in Ontario. The results indicated the OWI has adaptive capacity capabilities in financial, institutional, political, technological, perceptions, knowledge, diversity and social capital resources areas. Based on the OWI case study, this framework provides an effective means of assessing regional wine industries’ capacity to adapt to climate change.

Damping in zinc-based alloys

The damping behaviour of the cold chamber pressure-die-casting alloy: M3, ZA8, ZA27, ZM11, Cosmal, Supercosmal and newly developed ZA27H1 and ZA27H2 was investigated at room temperature and elevated temperatures of up to 90 degrees C. The damping properties of the alloys were established at all temperatures. Formulas were established to predict damping properties of each alloy at any given temperature. The prediction formulae were found to be very accurate. All of the experimental alloys were heterogenous with varying microstructure and grain size; this was the major contribution and dominated the damping properties of the alloys. Super cosmal and ZA27 possessed the highest tensile strength but ZA27H1, ZA27H2 and ZM11 showed the highest damping properties. The relationship between microstructure and damping capacity of all alloys was also examined using back-scattered electron on the SEM. Further more detailed examinations of the microstructures of alloys ZM11, Cosmal and Supercosmal were carried out on the transmission electron microscope in order to establish the phases present in all alloys. These helped to obtain the mechanism of damping in the experimental alloys. The main damping mechanism in most of the experimental alloys was due to grain-boundary-sliding. Micro structural examinations also revealed the absence of -phase in the Cosmal and Supercosmal. This was thought to be due to a change in solid solubility of the alloys, which could have been caused by the addition of Si.

Water Governance in Haiti: An Assessment of Laws and Institutional Capacities

The Republic of Haiti struggles to sustainably manage its water resources. Public health is compromised by low levels of water supply, sanitation, and hygiene, and water resources are often contaminated and unsustainably allocated. While poor governance is often blamed for these shortcomings, the laws and institutions regulating water resources in Haiti are poorly understood, especially by the international community. This study brings together and analyzes Haitian water laws, assesses institutional capacities, and provides a case study of water management in northern Haiti in order to provide a more complete picture of the sector. Funded by the Inter-American Development Bank as part of the Water Availability, Quality and Integrated Water Resources Management in Northern Haiti (HA-T1179) Project, this study took place from January-July 2015, with the help of local experts and participating stakeholders. The results indicate that Haiti’s water law framework is highly fragmented, with overlapping mandates and little coordination between ministries at the national level, and ambiguous but unrealistic roles for subnational governments. A capacity assessment of institutions in northern Haiti illustrates that while local stakeholders are engaged, human and financial resources are insufficient to carry out statutory responsibilities. The findings suggest that water resources management planning should engage local governments and community fixtures while supplementing capacities with national or international support.

Advanced electrospun nanofibrous mats for hindering delamination, improving damping and for sensing of composite laminates

Carbon Fiber Reinforced Polymers (CFRPs) display high specific mechanical properties, allowing the creation of lightweight components and products by metals replacement. To reach outstanding mechanical performances, the use of stiff thermoset matrices, like epoxy, is preferred. Laminated composites are commonly used for their ease of manipulation during object manufacturing. However, the natural anisotropic structure of laminates makes them vulnerable toward delamination. Moreover, epoxy-based CFRPs are very stiff materials, thus showing low damping capacity, which results in unwanted vibrations and structure-borne noise that may contribute to delamination triggering. Hence, searching for systems able to limit these drawbacks is of primary importance for safety reasons, as well as for economic ones. In this experimental thesis, the production and integration of innovative rubbery nanofibrous mats into CFRP laminates are presented. A smart approach, based on single-needle electrospinning of rubber-containing blends, is proposed for producing dimensionally stable rubbery nanofibers without the need for rubber crosslinking. Nano-modified laminates aim at obtaining structural composites with improved delamination resistance and enhanced damping capacity, without significantly lowering other relevant mechanical properties. The possibility of producing nanofibers nano-reinforced with graphene to be applied for reinforcing composite laminates is also investigated. Moreover, the use of piezoelectric nanofibrous mats in hybrid composite laminates for achieving self-sensing capability is presented too as a different approach to prevent the catastrophic consequences of possible structural laminate failure. Finally, an accurate, systematic, and critical study concerning tensile testing of nonwovens, using electrospun Nylon 66 random nanofibrous mats as a case study, is proposed. Nanofibers diameter and specimen geometry were investigated to thoroughly describe the nanomat tensile behaviour, also considering the polymer thermal properties, and the number of nanofibers crossings as a function of the nanofibers diameter. Stress-strain data were also analysed using a phenomenological data fitting model to interpret the tensile behaviour better.

Damping and Thermomechanical behaviour of CFRP laminates modified with rubbery nanofibers

Nanofibrous membranes are a promising material for tailoring the properties of laminated CFRP composites by embedding them into the structure. This project aimed to understand the effect of number, position and thickness of nanofibrous modifications specifically on the damping behaviour of the resulting nano-modified CFRP composite with an epoxy matrix. An improvement of damping capacity is expected to improve a composites lifetime and fatigue resistance by prohibiting the formation of microcracks and consequently hindering delamination, it also promises a rise in comfort for a range of final products by intermission of vibration propagation and therefore diminution of noise. Electrospinning was the technique employed to produce nanofibrous membranes from a blend of polymeric solutions. SEM, WAXS and DSC were utilised to evaluate the quality of the obtained membranes before they were introduced, following a specific stacking sequence, in the production process of the laminate. A suitable curing cycle in an autoclave was applied to mend the modifications together with the matrix material, ensuring full crosslinking of the matrix and therefore finalising the production process. DMA was exercised in order to gain an understanding about the effects of the different modifications on the properties of the composite. During this investigation it became apparent that a high number of modifications of laminate CFRP composites, with an epoxy matrix, with thick rubbery nanofibrous membranes has a positive effect on the damping capacity and the temperature range the effect applies in. A suggestion for subsequent studies as well as a recommendation for the production of nano-modified CFRP structures is included at the end of this document.

Determinação das propriedades mecânicas à tração de adesivos estruturais frágeis e dúcteis

A crescente evolução na tecnologia das juntas coladas conferiu um potencial atractivo às ligações adesivas, com aplicações nas mais variadas indústrias. Isto deve-se não só aos aspetos económicos, tais como a melhoria da cadência de produção mas também à resistência mecânica que estas proporcionam. A possibilidade de ligar facilmente materiais distintos, a distribuição mais uniforme das tensões, a melhor resistência à fadiga e a elevada capacidade de amortecimento de vibrações estão entre as principais vantagens da utilização deste tipo de ligação. Estas propriedades transformam as juntas coladas numas das preferidas no momento de seleção de meios de união. O trabalho desenvolvido nesta dissertação enquadra-se no âmbito das ligações adesivas e tem como principais objetivos a produção de uma ferramenta para a produção de provetes de adesivo, assim como a determinação das propriedades mecânicas à tração dos mesmos para testar o desempenho do molde fabricado. Para tal, utilizou-se um adesivo frágil (Araldite® AV 138), um dúctil (Araldite® 2015) e um muito dúctil (SikaForce® 7888). Paralelamente é selecionado o método mais adequado na obtenção destes provetes, designadamente escolhendo entre a moldação em molde aberto e a injeção em molde fechado. Com vista à obtenção dos provetes, foi projetado e construído um molde em aço. Recorrendo à máquina de tração Shimadzu AG – X 100, realizaram-se os respetivos ensaios de tração, para a determinação de todas as propriedades mecânicas dos adesivos. Para efeitos de comparação de resultados foram utilizados dois tipos de extensómetros, um mecânico e um ótico. Os resultados experimentais permitiram observar que a presença de vazios afetou especialmente a deformação de rotura e a tensão de rotura. Detetaram-se pequenas discordâncias, comparativamente com os estudos publicados, de algumas características mecânicas obtidas dos diversos adesivos utilizados. Constatou-se também um ligeiro desfasamento entre os valores adquiridos com os dois tipos de extensómetros utilizados.

Grado de pérdida de capacidad laboral asociada a la comorbilidad de los desórdenes músculo esqueléticos en la junta de calificación de invalidez regional Huila, 2009-2012

Resumen: Los desórdenes músculo esqueléticos son entidades que generan un efecto en la salud relacionados con la calidad de vida, dado al impacto global en la condición física, el bienestar psicológico y funcional. Estas entidades generan un gran número de indemnizaciones y en algunas oportunidades según el grado de pérdida de capacidad laboral la invalidez. Objetivo: Determinar la asociación del grado de perdida de la capacidad laboral con la comorbilidad de los desórdenes músculo esqueléticos y otros factores asociados. Materiales y métodos: Se realizó un estudio de corte transversal, basado en registros e historias clínicas. Los registros iniciales fueron 1427 casos, de los cuales 513 presentaban diagnóstico de DME y de estos 240 solicitaron la pérdida de capacidad laboral a la junta de invalidez regional Huila en el periodo comprendido del 2009 al 2012. Resultados: La distribución del grado de la pérdida de capacidad laboral generada de los DME por incapacidad permanente parcial fue del 73,3% y por invalidez el 26,7%. Se encontró una asociación significativa con respecto a la edad (p=0,002), donde el rango de 50-65 años presento mayor pérdida de capacidad laboral; con el género (p=0,047), siendo el femenino más prevalente la invalidez (34,7%) que en el masculino (23,2%) y la comorbilidad (p=0,019), donde los desórdenes músculo esqueléticos y los trastornos depresivos generaron mayor pérdida de capacidad laboral. No se encontró asociación significativa con la escolaridad (p=0,167), oficio (p=0,442) y actividad económica (p=0,118). En el análisis multivariado se encontró asociación significativa con el origen común (OR=4.028, IC 95%: 2.010, 8.072), el sexo femenino (OR=2.565, IC 95%: 1.140, 5.771), y el nivel de escolaridad técnico (OR=12.208, IC 95%: 1.372, 108.634). Conclusiones: La comorbilidad generó mayor pérdida de capacidad laboral, aunque los factores que en conjunto mostraron asociación fueron la edad avanzada, el género femenino, el origen común y el menor nivel educativo.

Genética, riesgo y derecho penal: una aproximación interdisciplinaria

Este texto presenta un estudio científico y jurídico sobre la genética y el derecho penal, con el objeto de realizar un pequeño aporte para la superación de la polarización política y moral de los debates sobre la genética y el derecho, que sólo ha conducido a una desafortunada paralización de la regulación sobre el tema que aumenta los riesgos para la salud humana y el equilibrio de los ecosistemas. Ante una problemática tan compleja, el derecho moderno no plantea una solución unitaria, sino una metodología a través de la cual cada sociedad democráticamente pueda adoptar sus propias decisiones frente a la salvaguarda de su patrimonio genético.

Perfil antropométrico e fisiológico de atletas de futsal da categoria sub-20 e adulta

The aim of this study was to determine the anthropometrical and physiological profile of futsal players and compare between under-20 and adults categories. Twenty four male athletes futsal participated in the study. They played in two teams of futsal-level state: a team with players under-20 (12 athletes); and another with players of the adults category (12 athletes). The participants performed a routine assessment involving anthropometric measurements (body mass, size, thickness of skin folds, perimeter body and bone diameter) and tests to estimate the aerobic and anaerobic capacity. The results did not indicate differences in relation to the anthropometrical and physiological profile between the under-20 and adults categories. We concluded that the promotion of athletes from the under-20 category for the adult's category taking into account the anthropometrical profile and aerobic and anaerobic performance indicators is recommended. However, other indicators, such as the technical, tactical and psychological aspects are important to help in understanding this promotion phase and in the training. © FTCD/FIP-MOC.

Influência do treinamento aeróbio periodizado em natação com ratos induzidos à obesidade exógena: estudo histomorfométrico do tecido cardíaco

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)