Microbiological indicators for the assessment of performance in the hazard analysis and critical control points (HACCP) system in meat lasagna production

The HACCP system is being increasingly used to ensure food safety. This study investigated the validation of the control measures technique in order to establish performance indicators of this HACCP system in the manufacturing process of Lasagna Bolognese (meat lasagna). Samples were collected along the manufacturing process as a whole, before and after the CCPs. The following microorganism s indicator (MIs) was assessed: total mesophile and faecal coliform counts. The same MIs were analyzed in the final product, as well as, the microbiological standards required by the current legislation. A significant reduction in the total mesophile count was observed after cooking (p < 0.001). After storage, there was a numerical, however non-significant change in the MI count. Faecal coliform counts were also significantly reduced (p < 0.001) after cooking. We were able to demonstrate that the HACCP system allowed us to meet the standards set by both, the company and the Brazilian regulations, proved by the reduction in the established indicators

Critical Control Points for Profitability in the Cow-Calf Enterprise

Financial, economic, and biological data collected from cow-calf producers who participated in the Illinois and Iowa Standardized Performance Analysis (SPA) programs were used in this study. Data used were collected for the 1996 through 1999 calendar years, with each herd within year representing one observation. This resulted in a final database of 225 observations (117 from Iowa and 108 from Illinois) from commercial herds with a range in size from 20 to 373 cows. Two analyses were conducted, one utilizing financial cost of production data, the other economic cost of production data. Each observation was analyzed as the difference from the mean for that given year. The independent variable utilized in both the financial and economic models as an indicator of profit was return to unpaid labor and management per cow (RLM). Used as dependent variables were the five factors that make up total annual cow cost: feed cost, operating cost, depreciation cost, capital charge, and hired labor, all on an annual cost per cow basis. In the economic analysis, family labor was also included. Production factors evaluated as dependent variables in both models were calf weight, calf price, cull weight, cull price, weaning percentage, and calving distribution. Herd size and investment were also analyzed. All financial factors analyzed were significantly correlated to RLM (P < .10) except cull weight, and cull price. All economic factors analyzed were significantly correlated to RLM (P < .10) except calf weight, cull weight and cull price. Results of the financial prediction equation indicate that there are eight measurements capable of explaining over 82 percent of the farm-to-farm variation in RLM. Feed cost is the overriding factor driving RLM in both the financial and economic stepwise regression analyses. In both analyses over 50 percent of the herd-to-herd variation in RLM could be explained by feed cost. Financial feed cost is correlated (P < .001) to operating cost, depreciation cost, and investment. Economic feed cost is correlated (P < .001) with investment and operating cost, as well as capital charge. Operating cost, depreciation, and capital charge were all negatively correlated (P < .10) to herd size, and positively correlated (P < .01) to feed cost in both analyses. Operating costs were positively correlated with capital charge and investment (P < .01) in both analyses. In the financial regression model, depreciation cost was the second critical factor explaining almost 9 percent of the herd-to-herd variation in RLM followed by operating cost (5 percent). Calf weight had a greater impact than calf price on RLM in both the financial and economic regression models. Calf weight was the fourth indicator of RLM in the financial model and was similar in magnitude to operating cost. Investment was not a significant variable in either regression model; however, it was highly correlated to a number of the significant cost variables including feed cost, depreciation cost, and operating cost (P < .001, financial; P < .10, economic). Cost factors were far more influential in driving RLM than production, reproduction, or producer controlled marketing factors. Of these cost factors, feed cost had by far the largest impact. As producers focus attention on factors that affect the profitability of the operation, feed cost is the most critical control point because it was responsible for over 50 percent of the herd-to-herd variation in profit.

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.

Effect of the implementation of the Hazard Analysis Critical Control Point (HACCP) prerequisite program in an institutional foodservice unit in Southern Brazil

The aims of this study were to investigate the hygienic practices in the food production of an institutional foodservice unit in Southern Brazil and to evaluate the effect of implementing good food handling practices and standard operational procedures using microbiological hygiene indicators. An initial survey of the general operating conditions classified the unit as regular in terms of compliance with State safety guidelines for food service establishments. An action plan that incorporated the correction of noncompliance issues and the training of food handlers in good food handling practices and standard operational procedures were then implemented. The results of the microbiological analysis of utensils, preparation surfaces, food handlers' hands, water, and ambient air were recorded before and after the implementation of the action plan. The results showed that the implementation of this type of practice leads to the production of safer foods.

Securing critical infrastructures and critical control systems: approaches for threat protection

The increased use of technology is necessary in order for industrial control systems to maintain and monitor industrial, infrastructural, or environmental processes. The need to secure and identify threats to the system is equally critical. Securing Critical Infrastructures and Critical Control Systems: Approaches for Threat Protection provides a full and detailed understanding of the vulnerabilities and security threats that exist within an industrial control system. This collection of research defines and analyzes the technical, procedural, and managerial responses to securing these systems.

APPLICATION of THE HAZARD ANALYSIS and CRITICAL CONTROL POINT (HACCP) SYSTEM on THE MUSHROOM PROCESSING LINE FOR FRESH CONSUMPTION

The Hazard Analysis and Critical Control Point (HACCP) is a preventive system that intends to guarantee the safety and harmlessness of food. It improves the quality of products as it eliminates possible defects during the process, and saves costs by practically eliminating final product inspection. This work describes the typical hazards encountered on the mushroom processing line for fresh consumption. Throughout the process, only the reception stage of mushrooms has been considered a critical control point (CCP). The main hazards at this stage were: the presence of unauthorised phytosanitary products; larger doses of such products than those permitted; the presence of pathogenic bacteria or thermo-stable enterotoxins. Putting into practice such knowledge would provide any industry that processes mushrooms for fresh consumption with a self-control HACCP-based system for its own productions.

Bundle Block Adjustment of CBERS-2B HRC Imagery Combining Control Points and Lines

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Locating control points in aerial images with a multi-scale approach based on terrestrial image patches

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Calcareous nannofossil datums and control points for the TCMS age model of ODP Site 175-1085

An astronomically calibrated age model for the Pliocene section of Ocean Drilling Program Leg 175 Cape Basin Site 1085 based on magnetic susceptibility data was developed using shipboard biostratigraphic datums. The composite core magnetic susceptibility record was compiled using shipboard correlations between Holes 1085A and 1085B and then tuned to the record of orbital variations in eccentricity to generate an orbitally tuned age model. Magnetic susceptibility apparently records climate variations in the Cape Basin. Strong power spectra values at the 100- and 400-k.y. frequency suggest an orbital control on the beat of Pliocene climate change in the Cape Basin.

GPS raw data (control points and ground control points) from the Liguria Region, Borghetto Santo Spirito, Italy

Monitoring the impact of sea storms on coastal areas is fundamental to study beach evolution and the vulnerability of low-lying coasts to erosion and flooding. Modelling wave runup on a beach is possible, but it requires accurate topographic data and model tuning, that can be done comparing observed and modeled runup. In this study we collected aerial photos using an Unmanned Aerial Vehicle after two different swells on the same study area. We merged the point cloud obtained with photogrammetry with multibeam data, in order to obtain a complete beach topography. Then, on each set of rectified and georeferenced UAV orthophotos, we identified the maximum wave runup for both events recognizing the wet area left by the waves. We then used our topography and numerical models to simulate the wave runup and compare the model results to observed values during the two events. Our results highlight the potential of the methodology presented, which integrates UAV platforms, photogrammetry and Geographic Information Systems to provide faster and cheaper information on beach topography and geomorphology compared with traditional techniques without losing in accuracy. We use the results obtained from this technique as a topographic base for a model that calculates runup for the two swells. The observed and modeled runups are consistent, and open new directions for future research.