Centralized IT management using SCCM in a large multinational company

Microsoft System Center Configuration Manager is a systems management product for managing large groups of computers and/or mobile devices. It provides operating system deployment, software distribution, patch management, hardware & software inventory, remote control and many other features for the managed clients. This thesis focuses on researching whether this product is suitable for large, international organization with no previous, centralized solution for managing all such networked devices and detecting areas, where the system can be altered to achieve a more optimal management product from the company’s perspective. The results showed that the system is suitable for such organization if properly configured and clear and transparent line of communication between key IT personnel exists.

An Autonomous Engine for Services Configuration and Deployment.

The runtime management of the infrastructure providing service-based systems is a complex task, up to the point where manual operation struggles to be cost effective. As the functionality is provided by a set of dynamically composed distributed services, in order to achieve a management objective multiple operations have to be applied over the distributed elements of the managed infrastructure. Moreover, the manager must cope with the highly heterogeneous characteristics and management interfaces of the runtime resources. With this in mind, this paper proposes to support the configuration and deployment of services with an automated closed control loop. The automation is enabled by the definition of a generic information model, which captures all the information relevant to the management of the services with the same abstractions, describing the runtime elements, service dependencies, and business objectives. On top of that, a technique based on satisfiability is described which automatically diagnoses the state of the managed environment and obtains the required changes for correcting it (e.g., installation, service binding, update, or configuration). The results from a set of case studies extracted from the banking domain are provided to validate the feasibility of this proposa

Autonomic hardware manager: uma arquitetura de hardware autonômico usando a solução de repositório ativo de componentes

This Thesis main objective is to implement a supporting architecture to Autonomic Hardware systems, capable of manage the hardware running in reconfigurable devices. The proposed architecture implements manipulation, generation and communication functionalities, using the Context Oriented Active Repository approach. The solution consists in a Hardware-Software based architecture called "Autonomic Hardware Manager (AHM)" that contains an Active Repository of Hardware Components. Using the repository the architecture will be able to manage the connected systems at run time allowing the implementation of autonomic features such as self-management, self-optimization, self-description and self-configuration. The proposed architecture also contains a meta-model that allows the representation of the Operating Context for hardware systems. This meta-model will be used as basis to the context sensing modules, that are needed in the Active Repository architecture. In order to demonstrate the proposed architecture functionalities, experiments were proposed and implemented in order to proof the Thesis hypothesis and achieved objectives. Three experiments were planned and implemented: the Hardware Reconfigurable Filter, that consists of an application that implements Digital Filters using reconfigurable hardware; the Autonomic Image Segmentation Filter, that shows the project and implementation of an image processing autonomic application; finally, the Autonomic Autopilot application that consist of an auto pilot to unmanned aerial vehicles. In this work, the applications architectures were organized in modules, according their functionalities. Some modules were implemented using HDL and synthesized in hardware. Other modules were implemented kept in software. After that, applications were integrated to the AHM to allow their adaptation to different Operating Context, making them autonomic.

Cloud query manager: uso de web semântica para evitar o problema de aprisionamento em IaaS

Cloud computing can be defined as a distributed computational model by through resources (hardware, storage, development platforms and communication) are shared, as paid services accessible with minimal management effort and interaction. A great benefit of this model is to enable the use of various providers (e.g a multi-cloud architecture) to compose a set of services in order to obtain an optimal configuration for performance and cost. However, the multi-cloud use is precluded by the problem of cloud lock-in. The cloud lock-in is the dependency between an application and a cloud platform. It is commonly addressed by three strategies: (i) use of intermediate layer that stands to consumers of cloud services and the provider, (ii) use of standardized interfaces to access the cloud, or (iii) use of models with open specifications. This paper outlines an approach to evaluate these strategies. This approach was performed and it was found that despite the advances made by these strategies, none of them actually solves the problem of lock-in cloud. In this sense, this work proposes the use of Semantic Web to avoid cloud lock-in, where RDF models are used to specify the features of a cloud, which are managed by SPARQL queries. In this direction, this work: (i) presents an evaluation model that quantifies the problem of cloud lock-in, (ii) evaluates the cloud lock-in from three multi-cloud solutions and three cloud platforms, (iii) proposes using RDF and SPARQL on management of cloud resources, (iv) presents the cloud Query Manager (CQM), an SPARQL server that implements the proposal, and (v) comparing three multi-cloud solutions in relation to CQM on the response time and the effectiveness in the resolution of cloud lock-in.

Regional scale analysis of landform configuration with base-level (isobase) maps

Base-level maps (or ""isobase maps"", as originally defined by Filosofov, 1960), express a relationship between valley order and topography. The base-level map can be seen as a ""simplified"" version of the original topographic surface, from which the ""noise"" of the low-order stream erosion was removed. This method is able to identify areas with possible tectonic influence even within lithologically uniform domains. Base-level maps have been recently applied in semi-detail scale (e.g., 1:50 000 or larger) morphotectonic analysis. In this paper, we present an evaluation of the method's applicability in regional-scale analysis (e.g., 1:250 000 or smaller). A test area was selected in northern Brazil, at the lower course of the Araguaia and Tocantins rivers. The drainage network extracted from SRTM30_PLUS DEMs with spatial resolution of approximately 900 m was visually compared with available topographic maps and considered to be compatible with a 1:1,000 000 scale. Regarding the interpretation of regional-scale morphostructures, the map constructed with 2nd and 3rd-order valleys was considered to present the best results. Some of the interpreted base-level anomalies correspond to important shear zones and geological contacts present in the 1:5 000 000 Geological Map of South America. Others have no correspondence with mapped Precambrian structures and are considered to represent younger, probably neotectonic, features. A strong E-W orientation of the base-level lines over the inflexion of the Araguaia and Tocantins rivers, suggest a major drainage capture. A N-S topographic swath profile over the Tocantins and Araguaia rivers reveals a topographic pattern which, allied with seismic data showing a roughly N-S direction of extension in the area, lead us to interpret this lineament as an E-W, southward-dipping normal fault. There is also a good visual correspondence between the base-level lineaments and geophysical anomalies. A NW-SE lineament in the southeast of the study area partially corresponds to the northern border of the Mosquito lava field, of Jurassic age, and a NW-SE lineament traced in the northeastern sector of the study area can be interpreted as the Picos-Santa Ines lineament, identifiable in geophysical maps but with little expression in hypsometric or topographic maps.

E-contracting with price configuration for Web services and QoS

The large amount of information in electronic contracts hampers their establishment due to high complexity. An approach inspired in Software Product Line (PL) and based on feature modelling was proposed to make this process more systematic through information reuse and structuring. By assessing the feature-based approach in relation to a proposed set of requirements, it was showed that the approach does not allow the price of services and of Quality of Services (QoS) attributes to be considered in the negotiation and included in the electronic contract. Thus, this paper also presents an extension of such approach in which prices and price types associated to Web services and QoS levels are applied. An extended toolkit prototype is also presented as well as an experiment example of the proposed approach.

Characterization of micro-bubble size distribution and flow configuration in DAF contact zone by a non-intrusive image analysis system and tracer tests

This paper aims to investigate the influence of some dissolved air flotation (DAF) process variables (specifically: the hydraulic detention time in the contact zone and the supplied dissolved air concentration) and the pH values, as pretreatment chemical variables, on the micro-bubble size distribution (BSD) in a DAF contact zone. This work was carried out in a pilot plant where bubbles were measured by an appropriate non-intrusive image acquisition system. The results show that the obtained diameter ranges were in agreement with values reported in the literature (10-100mm), quite independently of the investigated conditions. The linear average diameter varied from 20 to 30mm, or equivalently, the Sauter (d(3,2)) diameter varied from 40 to 50mm. In all investigated conditions, D(50) was between 75% and 95%. The BSD might present different profile (with a bimodal curve trend), however, when analyzing the volumetric frequency distribution (in some cases with the appearance of peaks in diameters ranging from 90-100mm). Regarding volumetric frequency analysis, all the investigated parameters can modify the BSD in DAF contact zone after the release point, thus potentially causing changes in DAF kinetics. This finding prompts further research in order to verify the effect of these BSD changes on solid particle removal efficiency by DAF.

Vortex configuration flow cell based on low temperature cofired ceramics as a compact chemiluminescence microsystern

The integration of optical detection methods in continuous flow microsystems can highly extend their range of application, as long as some negative effects derived from their scaling down can be minimized. Downsizing affects to a greater extent the sensitivity of systems based on absorbance measurements than the sensitivity of those based on emission ones. However, a careful design of the instrumental setup is needed to maintain the analytical features in both cases. In this work, we present the construction and evaluation of a simple miniaturized optical system, which integrates a novel flow cell configuration to carry out chemiluminescence (CL) measurements using a simple photodiode. It consists of a micro-mixer based on a vortex structure, which has been constructed by means of the low-temperature cofired ceramics (LTCC) technology. This mixer not only efficiently promotes the CL reaction due to the generated high turbulence but also allows the detection to be carried out in the same area, avoiding intensity signal losses. As a demonstration, a flow injection system has been designed and optimized for the detection of cobalt(H) in water samples. It shows a linear response between 2 and 20 mu M with a correlation of r > 0.993, a limit of detection of 1.1 mu M, a repeatability of RSD = 12.4 %, and an analysis time of 17 s. These results demonstrate the suitability of the proposal to the determination of compounds involved in CL reactions by means of an easily constructed versatile device based on low-cost instrumentation.

Long-Chain Acyl-Homoserine Lactones from Methylobacterium mesophilicum: Synthesis and Absolute Configuration

The acyl-homoserine lactones (acyl-HSLs) produced by Methylobacterium mesophilicum isolated from orange trees infected with the citrus variegated chlorosis (CVC) disease have been studied, revealing the occurrence of six long-chain acyl-HSLs, i.e., the saturated homologues (S)-N-dodecanoyl (1) and (S)-N-tetradecanoyl-HSL (5), the uncommon odd-chain N-tridecanoyl-HSL (3), the new natural product (S)-N-(2E)-dodecenoyl-HSL (2), and the rare unsaturated homologues (S)-N-(7Z)-tetradecenoyl (4) and (S)-N-(2E,7Z)-tetradecadienyl-HSL (6). The absolute configurations of all HSLs were determined as 3S. Compounds 2 and 6 were synthesized for the first time. Antimicrobial assays with synthetic acyl-HSLs against Gram-positive bacterial endophytes co-isolated with M. mesophilicum from CVC-infected trees revealed low or no antibacterial activity.

Assignment of the absolute configuration at the sulfur atom of thioridazine metabolites by the analysis of their chiroptical properties: The case of thioridazine 2-sulfoxide

Thioridazine (THD) is a commonly prescribed phenotiazine neuroleptic drug, which is extensively biotransformed in the organism producing as main metabolites sulfoxides and a sulfone by sulfur oxidation Significant differences have been observed in the activity of the THD enantiomers as well as for its main metabolites, and enantioselectivity phenomena have been proved in the metabolic pathway. Here the assignment of the absolute configuration at the sulfur atom of enantiomeric THD-2-sulfoxide (THD-2-SO) has been carried out by circular dichroism (CD) spectroscopy The stereoisomers were separated by HPLC on Chiralpak AS column, recording the CD spectra for the two collected enantiomeric fractions The theoretical electronic CD spectrum has been obtained by the TDDFT/B3LYP/6-31G*. as Boltzmann averaging of the contributions calculated for the most stable conformations of the drug The comparison of the simulated and experimental spectra allowed the absolute configuration at the sulfur atom of the four THD-2-SO stereoisomers to be assigned The developed method should be useful for a reliable correlation between stereochemistry and activity and/or toxicity

Configuration of stilbene derivatives by (1)H NMR and theoretical calculation of chemical shifts

The direct E/Z configuration assignment of tri- and tetra-substituted stilbenes (and other analogous olefins) when only one of the isomers is available is a quite challenging task. Sometimes, a chemical transformation or some other tedious method is necessary for determination of the double bond substitution pattern. In this paper, we relied on theoretical calculation of chemical shifts as a complementary tool for (1)H NMR determination of the configuration of an alpha-phenylcinnamic acid prepared as a unique isomer by the Perkin reaction. (C) 2010 Elsevier B.V. All rights reserved.

Structure and absolute configuration of mycobactin J

Mycobactin J 1 is a commercially available siderophore isolated from Mycobacterium avium subsp, paratuberculosis. There are discrepancies between previous reports of its structure and none have addressed its absolute configuration. We report here the complete structure and stereochemistry of mycobactin J, along with methodology to enable the determination of the absolute configuration of other mycobactins on a small scale. (C) 2001 Elsevier Science Ltd. All rights reserved.

Accounting and the “Doctor-Manager Relationship”

The adoption of the “new public management” in the hospital sector brought about greater presence and power to professional managers in hospitals, thus increasing the risk of conflict in the doctor-manager relationship. Aiming to enrich the discussion on the factors that could be the bases for this conflict and considering the role of accounting, the study presented here corresponds, basically, to what we call “content analysis” of qualitative studies. The results demonstrate that the Portuguese doctors as the sample studied accept, in essence, the principles of enterprise management and recognize the use of accounting information in the scope of their functions as long as they are called to participate as legitimate actors, and authorities respect their desires to preserve a practice which they consider of quality.

The institutional configuration of sport policy in Brazil: organization, evolution and dilemmas

Brazil has become the center of the spotlight of the whole world recently, amongst many other reasons, one of them was because it was chosen to host a series of mega sporting events - Pan American Games in 2007, Confederations Football Cup in 2013, Fifa Football World Cup 2014 Games and 2016 Olympic and Paralympic Games in 2016. However, little is known about the country's administrative governmental structure focused on sport policy. The available studies focus their analysis on the sport policies content, but not on the arrangement of its structural decision-making. The main aim of this article is indeed to describe, based on official documentation, the evolution and the current arrangements of the government responsible for the administrative structure for the planning and implementation of sports policies in Brazil. Thus, we tried to list the main problems arising from the organization of the Brazilian sports' management. These problems are: (1) inappropriate institutional structure in terms of human resources and obstacles to participation by other social actors beyond the officials (parliament and members of the Ministry of Sports) in the sports policy; (2) disarticulation between public institutions generating redundancies and conflicts of jurisdiction due to the poor division of labor between bureaucracy agencies; and (3) inadequate planning proved by the lack of organization of some institutions, and by the lack of assessment and continuity of public policies over time. Therefore, we must emphasize those problems from above, and due to these administrative arrangements, Brazilian sports' policy has big challenges in the sport development in this country, which includes the creation of a national "system" for sports and a priority investment in sport education.