Respuesta productiva a diferentes programaciones de riego en trigo (Triticum aestivum L.) : región semiárida de Córdoba, Argentina

En la evaluación regional de riego con equipos presurizados, se observa que la mayoría de los establecimientos no hacen uso de programas de riego basados en necesidades hídricas, dando lugar a un uso inadecuado de los recursos hídricos. Por ello, en el presente trabajo se evalúa la producción de trigo (Triticum aestivum L.) bajo riego programado considerando las variables clima-suelo-cultivo. La experiencia se desarrolló en el campo experimental de la Universidad Nacional de Río Cuarto durante los ciclos 1999, 2000 y 2001. Se contó con la información climática de la estación meteorológica instalada en el lugar. En los ensayos se consideró un diseño estadístico en parcelas totalmente al azar con seis repeticiones. Los tratamientos fueron los siguientes: 1. sin riego; 2. reponiendo desde un umbral de marchitez incipiente hasta capacidad de campo; 3. reponiendo desde umbral de marchitez incipiente hasta un nivel que permita el aprovechamiento del agua de lluvia con un 75 % de probabilidad de ocurrencia; 4. riego sólo en el período comprendido entre las etapas fenológicas de macollaje y grano lechoso y 5. considerando el modelo de programación YACU. Los resultados de esta experiencia en los tres años considerados establecen una respuesta significativa al riego complementario, con una producción promedio de los tratamientos bajo riego de 4980 kg.ha-1 en 1999, 5895 kg.ha-1 en el 2000 y 6271 kg.ha-1 en el 2001, contra 3296 kg.ha-1, 4054 kg.ha-1 y 3197 kg.ha-1, respectivamente, para los tratamientos sin riego. Dentro de los tratamientos bajo riego, en los dos primeros años se obtuvieron valores significativamente menores en las parcelas regadas sólo entre macollaje y grano lechoso: 4704 kg.ha-1 en 1999 y 4973 kg.ha-1 en el 2000.

Producción de maíz bajo diferentes regímenes de riego complementario en Río Cuarto, Córdoba, Argentina. I. Rendimiento en grano de maíz y sus componentes

El maíz (Zea mays L.) es uno de los principales cultivos de la Pampa Húmeda de Argentina. El objetivo de este trabajo fue evaluar los efectos del riego complementario sobre el rendimiento de grano y sus componentes. El mismo se llevó a cabo en el ciclo agrícola 2001-2002, en el campo experimental de la Universidad Nacional de Río Cuarto. Se usó un diseño completamente al azar con 5 tratamientos y 4 repeticiones. Para efectuar la programación de los diferentes riegos se dividió el ciclo del cultivo en tres etapas: precrítico, crítico y poscrítico. Para la determinación del momento de riego se realizó un balance hídrico. El rendimiento de grano no mostró diferencias significativas en los cuatro tratamientos con riego, sin embargo, hubo diferencia significativa (α = 0,05) entre los tratamientos regados y no regados. En promedio el rendimiento en grano en los tratamientos regados fue de 72 % mayor que en el tratamiento sin riego. Los componentes del rendimiento fueron afectados significativamente (α = 0,05) por la falta de riego. La cantidad de agua aplicada varió entre 360 y 300 mm y el agua total consumida en el ciclo del cultivo (según el balance hídrico) fue para los tratamientos con riego, de 575 mm y para el testigo de 308 mm. La eficiencia del uso de agua para grano fue de 2.75 kg.m-3, en promedio.

Producción de maíz bajo diferentes regímenes de riego complementario en Río Cuarto, Córdoba, Argentina. II. Producción de materia seca

El objetivo de este trabajo fue evaluar el efecto del riego complementario sobre el rendimiento de materia seca del cultivo de maíz. Se usó un diseño completamente al azar con 5 tratamientos y 4 repeticiones. Para efectuar la programación de los diferentes tratamientos de riego se dividió el ciclo del cultivo en tres etapas (precrítico, crítico y poscrítico). Para la determinación del momento de riego se realizó un balance hídrico con datos climáticos obtenidos de la Estación Meteorológica ubicada en el lugar del ensayo. El riego se efectuó con un equipo presurizado de avance lateral. El maíz cumplió su ciclo en 138 días en todos los tratamientos y requirió 1660,6 grados día para alcanzar madurez fisiológica. El rendimiento de materia seca tuvo diferencias significativas (a = 0,05) entre los distintos tratamientos regados y entre éstos y el testigo. Los valores extremos de producción fueron de 34.628 kg.ha-1 en el tratamiento 1 y 20.414 kg.ha-1 en el tratamiento sin riego. La cantidad de agua aplicada varió entre 360 y 300 mm y el agua total consumida en el ciclo del cultivo, según el balance hídrico, fue para los tratamientos con riego de 575 mm ± 15 mm y para el testigo sin riego de 308 mm. La eficiencia de uso de agua para materia seca tuvo diferencias significativas (a = 0,05) entre los tratamientos regados (5,7 kg.m-3) y no regados (6,6 kg.m-3). El índice de cosecha fue de 0,49.

Relevamiento de plagas y enemigos naturales en el cultivo de lechuga : : provincia de La Pampa (Argentina)

En la provincia de La Pampa son escasos los datos sobre relevamiento de plagas y de especies benéficas en lechuga, por ello resulta necesario conocer e investigar los organismos perjudiciales y sus enemigos naturales y las condiciones predisponentes al incremento de sus poblaciones. Los objetivos de este trabajo fueron determinar las especies fitófagas para dos variedades de lechuga, en dos sistemas de producción, e identificar las especies benéficas que puedan actuar como controladores biológicos. El estudio se realizó en la huerta de la Facultad de Agronomía de la UNLPam, con muestreos semanales, desde julio hasta octubre de 2004, a campo con riego complementario y bajo cubierta en macrotúnel con riego por goteo, con las variedades de lechuga Grand Rapid y Gallega de Invierno. En cada variedad y en cada sistema se revisaron 6 plantas al azar, registrándose: especie, número de individuos y su estado de desarrollo. Se comparó mediante ANOVA y test de Tukey (a = 0,05). Se detectó la presencia de dos especies de pulgones: Myzus persicae Sulzer (Homoptera: Aphididae) y Nasonovia ribisnigri (Mosley) (primera cita de N. ribisnigri para la provincia de La Pampa). El mayor número de pulgones se concentró en el cultivo protegido bajo cubierta. Se registraron dos enemigos naturales de los pulgones: un hongo entomopatógeno y un parasitoide: Aphidius ervi (Hymenoptera: Braconidae). También se encontraron, en bajas densidades, larvas de Naupactus leucoloma Boheman (Coleoptera: Curculionidae) que se alimentaban de las hojas.

Optimal water allocation in shortage situations as applied to an irrigation community.

This work studies the most beneficial way of allocating water in an irrigation community in water shortage situations. Therefore, it proposes that the irrigation surface area be divided into homogeneous zones, each with a beneficial relationship with respect to the water applied. The mathematical formula that enables one to obtain the optimal quota for the users or irrigation community as a whole has been found for individual relations of a quadratic or power type, and these have yielded different and complementary characteristics. Dimensionless variables have been used to display the results, and to compare with other alternative allocation rules such as the proportional rule, referencing the situation without water restrictions. As a result, for each water shortage situation, the water that is allocated to each user is obtained, together with the losses in individual income and the losses for the community as a whole. Furthermore, a proposal is put forth for establishing the marginal benefit from the water available, which could be of interest in enabling each community to analyze whether it is in its best interest to invest in increasing the resource, or to sell the resource to other users. Finally, an example is given to demonstrate how the method works and to show that, when the differences between the production schemes are considered, the differences in benefit reduction between the proportional allocation and the optimal allocation are also sizeable. Read More: http://ascelibrary.org/doi/abs/10.1061/(ASCE)IR.1943-4774.0000667

A Microleakage Study Of Gutta-percha/ah Plus And Resilon/real Self-etch Systems After Different Irrigation Protocols.

The development and maintenance of the sealing of the root canal system is the key to the success of root canal treatment. The resin-based adhesive material has the potential to reduce the microleakage of the root canal because of its adhesive properties and penetration into dentinal walls. Moreover, the irrigation protocols may have an influence on the adhesiveness of resin-based sealers to root dentin. The objective of the present study was to evaluate the effect of different irrigant protocols on coronal bacterial microleakage of gutta-percha/AH Plus and Resilon/Real Seal Self-etch systems. One hundred ninety pre-molars were used. The teeth were divided into 18 experimental groups according to the irrigation protocols and filling materials used. The protocols used were: distilled water; sodium hypochlorite (NaOCl)+eDTA; NaOCl+H3PO4; NaOCl+eDTA+chlorhexidine (CHX); NaOCl+H3PO4+CHX; CHX+eDTA; CHX+ H3PO4; CHX+eDTA+CHX and CHX+H3PO4+CHX. Gutta-percha/AH Plus or Resilon/Real Seal Se were used as root-filling materials. The coronal microleakage was evaluated for 90 days against Enterococcus faecalis. Data were statistically analyzed using Kaplan-Meier survival test, Kruskal-Wallis and Mann-Whitney tests. No significant difference was verified in the groups using chlorhexidine or sodium hypochlorite during the chemo-mechanical preparation followed by eDTA or phosphoric acid for smear layer removal. The same results were found for filling materials. However, the statistical analyses revealed that a final flush with 2% chlorhexidine reduced significantly the coronal microleakage. A final flush with 2% chlorhexidine after smear layer removal reduces coronal microleakage of teeth filled with gutta-percha/AH Plus or Resilon/Real Seal SE.

Effectiveness of different final irrigation protocols in removing debris in flattened root canals

This study evaluated in vitro the capacity of debris removal from the apical third of flattened root canals, using different final irrigation protocols. Thirty human mandibular central incisors with a mesiodistal flattened root were prepared using rotary instrumentation by Endo-Flare 25.12 and Hero 642 30.06, 35.02, 40.02 files, irrigated with 2 mL of 1% NaOCl after each file. The specimens were randomly distributed into 5 groups according to the final irrigation of root canals: Group I: 10 mL of distilled water (control), Group II: 10 mL of 1% NaOCl for 8 min, Group III: 2 mL of 1% NaOCl for 2 min (repeated 4 times), Group IV: 10 mL of 2.5% NaOCl for 8 min, and Group V: 10 mL of 2.5% NaOCl for 2 min (repeated 4 times). The apical thirds of the specimens were subjected to histological processing and 6-μm cross-sections were obtained and stained with hematoxylin-eosin. The specimens were examined under optical microscopy at ×40 magnification and the images were subjected to morphometric analysis using the Scion image-analysis software. The total area of root canal and the area with debris were measured in square millimeters. Analysis of variance showed no statistically significant difference (p>0.05) among the groups GI (2.39 ± 3.59), GII (2.91 ± 2.21), GIII (0.73 ± 1.36), GIV (0.95 ± 0.84) and GV (0.51 ± 0.22). In conclusion, the final irrigation protocols evaluated in this study using the Luer syringe presented similar performance in the removal of debris from the apical third of flattened root canals.

Morphological and molecular characterization of cyanobacteria from a Brazilian facultative wastewater stabilization pond and evaluation of microcystin production

The cyanobacterial population in the Cajati waste stabilization pond system (WSP) from Sao Paulo State, Brazil was assessed by cell isolation and direct microscope counting techniques. Ten strains, belonging to five genera (Synechococcus, Merismopedia, Leptolyngbya, Limnothrix, and Nostoc), were isolated and identified by morphological and molecular analyses. Morphological identification of the isolated strains was congruent with their phylogenetic analyses based on 16S rDNA gene sequences. Six cyanobacterial genera (Synechocystis, Aphanocapsa, Merismopedia, Lyngbya, Phormidium, and Pseudanabaena) were identified by direct microscope inspection. Both techniques were complementary, since, of the six genera identified by direct microscopic inspection, only Merismopedia was isolated, and the four other isolated genera were not detected by direct inspection. Direct microscope counting of preserved cells showed that cyanobacteria were the dominant members (> 90%) of the phytoplankton community during both periods evaluated (summer and autumn). ELISA tests specific for hepatotoxicmicrocystins gave positive results for six strains (Synechococcus CENA108, Merismopedia CENA106, Leptolyngbya CENA103, Leptolyngbya CENA112, Limnothrix CENA109, and Limnothrix CENA110), and for wastewater samples collected from raw influent (3.70 mu g microcystins/l) and treated effluent (3.74 mu g microcystins/l) in summer. Our findings indicate that toxic cyanobacteria in WSP systems are of concern, since the treated effluent containing cyanotoxins will be discharged into rivers, irrigation channels, estuaries, or reservoirs, and can affect human and animal health.

Tabasco pepper production with CO(2) application using drip irrigation

Tabasco pepper production with CO(2) application using drip irrigation. Application of CO(2) through water reduces the soil solution pH, causing variations in nutrient mobility and consequent effects on the absorption. The objective of this study was to analyze the effects of carbon dioxide rates supplied by drip irrigation in the production of Capsicum frutescens L. crop. A randomized block design with four treatments and eight replications was used. The treatments were four rates of CO(2): 0 (T1), 451.95 (T2); 677.93 (T3) and 903.92 (T4) kg ha(-1). The fruits were counted and weighed; the length and the diameter were obtained from an average of 20 fruits per plant, randomly taken, from each treatment in the plot. The quadratic effect (p < 0.01) occurred for CO(2) on the yield and there was quadratic effect (p < 0.05) of the rates on the number of fruits. There were no effects of CO(2) rates on the green matter, dry matter and fruit length and diameter. The T2 treatment provided greater yield and higher number of fruits per plant with an increase of 16 and 26%, respectively in relation to T1 (without CO(2)). CO(2) application favored the increase in the yield because of the greater number of fruits per plant in the Tabasco pepper crop.

Distribution and storage characterization of soil solution for drip irrigation

The increased use of marginal quality water with drip irrigation requires sound fertigation practices that reconcile environmental concerns with viable crop production objectives. We conducted experiments to characterize dynamics and patterns of soil solution within wet bulb formed by drip irrigation. Time-domain reflectometry probes were used to monitor the distribution of potassium nitrate (KNO(3)) and water distribution from drippers discharging at constant flow rates of 2, 4 and 8 L h(-1) in soil-filled containers. Considering results from different profiles, we observed greater solute storage near the dripper decreasing gradually towards the wetting front. About half of the applied KNO(3) solution (48%) was stored in the first layer (0-0.10 m) for all experiments, 29% was stored in the next layer (0.10-0.20 m). Comparing different dripper flow rates, we observed higher solution storage for 4 L h(-1), with 45, 53 and 47% of applied KNO(3) solution accumulating in the first layer (0-0.10 m) for dripper flow rates of 2, 4 and 8 L h(-1), respectively. The results suggest that based on the volume and frequency used in this experiment, it would be advantageous to apply small amounts of solution at more frequent intervals to reduce deep percolation losses of applied water and solutes.

Economic feasibility of cowpea irrigation in Piaui State

The objective of this work was to evaluate the economic feasibility of cowpea irrigation in Piaui State Brazil. Water balances were carried out on a daily basis using the Thornthwaite and Mather (1955) method, for 165 sites, considering twelve sowings dates and available water capacity in the soil of 20, 40 and 60 mm. The net revenues were estimated with a probability of occurrence of 75%, later being spatialized to Piaui State. Cowpea irrigation was shown to economically viable for all sowing dates, irrespective of the available water capacity. Net revenues varied among several regions of the State, in function of the sowing date and available water capacity in the soil. Considering a planning strategy for Piaui State, sowing on February, I was shown to be most favorable, because it enabled higher net revenue values, covering larger areas of the State.

Optimal irrigation depth for bean crops considering water constraints and farmer`s risk aversion level

Nowadays, the rising competition for the use of water and environmental resources with consequent restrictions for farmers should change the paradigm in terms of irrigation concepts, or rather, in order to attain economical efficiency other than to supply water requirement for the crop. Therefore, taking into account the social and economical role of bean activity in Brazil, as well as the risk inherent to crop due to its high sensibility to both deficit and excessive water, the optimization methods regarding to irrigation management have become more interesting and essential. This study intends to present a way to determine the optimal water supply, considering different combinations between desired bean yield and level of risk, bringing as a result a graph with the former associated with the latter, depending on different water depths.

Flow rate sprinkler development for site-specific irrigation

Due to the rapid depletion of water resources, water must be used more efficiently in agriculture to maintain current levels of yield in irrigated areas. The efficiency of irrigation systems can be increased by adjusting the amount of water applied to specific conditions of soil and crop, which may vary in a field. Taking into account spatial and temporal variability, it is evident that an equipment capable of providing different irrigation levels is necessary to meet the water requirement of the soil. This work aims to develop and evaluate a flow rate sprinkler to be used in center pivots or linear moving irrigation systems, with potential for utilization in irrigation scheduling. A prototype was developed by duplicating its calibrations, and discharge coefficient adjustment was carried out in the laboratory. To predict the flow rate, a successful model that represented the operation of the flow rate sprinkler was established. The calibration of the flow rate sprinkler prototype showed satisfactory statistical and technical results. Automation of the prototype was achieved by driving a step motor using communication from the parallel port of a microcomputer, which was controlled by a software developed for this purpose. The results were satisfactory and technically feasible.

Irrigation requirements and transpiration coupling to the atmosphere of a citrus orchard in Southern Brazil

Crop evapotranspiration (ETc) was measured as evaporative heat flux from an irrigated acid lime orchard (Citrus latifolia Tanaka) using the aerodynamic method. Crop transpiration (T) was determined by a stem heat balance method. The irrigation requirements were determined by comparing the orchard evapotranspiration (ETc) and T with the reference evapotranspiration (ETo) derived from the Penman-Monteith equation, and the irrigation requirements were expressed as ETc/ETo (Kc) and T/ETo (Kcb) ratios. The influence of inter-row vegetation on the ETc was analyzed because the measurements were taken during the summer and winter, which are periods with different regional soil water content. In this study, the average Mc values obtained were 0.65 and 0.24 for the summer and winter, respectively. The strong coupling of citrus trees to the atmosphere and the sensitivity of citrus plants to large vapor pressure deficits and air/leaf temperatures caused variations in the Kcb in relation to the ETo ranges. During the summer, the Kcb value ranged from 0.34 when the ETo exceeded 5 mm d(-1) to 0.46 when the ETo was less than 3 mm d(-1). (C) 2011 Elsevier B.V. All rights reserved.

Microbial Metabolic Potential Affected by Surplus Wastewater Irrigation in Tropical Soil Cultivated with Tifton 85 Bermuda Grass (Cynodon dactylon Pers. X C. niemfuensis Vanderyst)

Agricultural reuse of treated sewage effluent (TSE) is an environmental and economic practice; however, little is known about its effects on the characteristics and microbial function in tropical soils. The effect of surplus irrigation of a pasture with TSE, in a period of 18 months, was investigated, considering the effect of 0% surplus irrigation with TSE as a control. In addition, the experiment consisted of three surplus treatments (25%, 50%, and 100% excess) and a nonirrigated pasture area (SE) to compare the soil microbial community level physiological profiles, using the Biolog method. The TSE application increased the average substrate consumption of the soil microbial community, based on the kinetic parameters of the average well color development curve fitting. There were no significant differences between the levels of surplus irrigation treatments. Surplus TSE pasture irrigation caused minor increases in the physiological status of the soil microbial community but no detectable damage to the pasture or soil.