Some theoretical and methodological considerations for the development of a critical competences model (CCM): an operant approach

This paper develops some theoretical and methodological considerations for the development of a critical competence model (CCM). The model is defined as a set of skills and knowledge functionally organized allowing measurable results with positive consequences for the strategic business objectives. The theoretical approaches of classical model of competences, the contemporary model of competencies and human competencies model were revised for the proposal development. implementation of the model includes 5 steps: 1) conducting a job analysis considering which dimensions or facets are subject to revision, 2) identify people with the opposite performance (the higher performance and lower performance); 3) identify critical incidents most relevant to the job position, 4) develop behavioral expectation scales (bes) and 5) validate BES obtained for experts in the field. As a final consideration, is determined that the competence models require accurate measurement. Approaches considering excessive theoreticism may cause the issue of competence become a fashion business with low or minimal impact, affecting its validity, reliability and deployment in organizations.

Modelo local de competencias que apoyan el éxito en la gestión en los empresarios emprendedores de Bogotá

Por medio de la literatura correspondiente a la medición de competencias, así como con los comportamientos apreciados de manera empírica a través del análisis de empresarios emprendedores exitosos y conforme a la teoría de los expertos en el tema de emprendimiento, se ha elaborado una herramienta de medición de competencias para empresarios emprendedores (creadores de empresa) de la ciudad de Bogotá. Dicha herramienta se usará en la medición de empresarios que hayan creado empresa entre el 2002 y el 2005 y que tengan el mayor crecimiento en venta anuales durante la última mitad de la última década. Las empresas hacen parte del sector industrial. Para ello inicialmente se hizo una revisión de competencias, basada en la trilogía de Martha Alles compuesta por los siguientes libros: Diccionario de Competencias, Diccionario de Comportamientos y Diccionario de Preguntas. Con la trilogía se logra la definición de competencias y la metodología para la medición de las mismas. Se siguió con una revisión biográfica de dos grandes empresarios bogotanos, que nacieron en Bogotá o que tienen el suficiente tiempo en Bogotá para ser considerados bogotanos, de la cual se extrajeron comportamientos específicos. Haciendo uso de la autoridad que tiene en el tema de emprendimiento Amar Bhide, se hizo una revisión de los comportamientos esenciales de todo emprendedor de acuerdo con sus conceptos al respecto. Para finalizar, se creó un modelo general de competencias basado en las que están más desarrolladas entre los empresarios encuestados y entrevistados.

Construcción de un instrumento para identificar el perfil de emprendedores bogotanos de la última década

El proyecto de investigación que se trabaja centra su atención en la siguiente cuestión: determinar un instrumento de recolección que permita identificar cuáles son las competencias que caracterizan a los emprendedores bogotanos creadores de empresas de rápido crecimiento. La presente es una investigación cualitativa que busca la mejor manera de preparar a los futuros emprendedores desde la educación superior. Si se conocen las competencias que acompañan al emprendedor se puede comprender mejor su capacidad de crear empresa y así buscar una mejor manera de preparar a los futuros emprendedores. Esto es importante para la economía de un país en general, máxime cuando se dan situaciones de depresión económica como el desempleo que se vive en la actualidad. “La creación y el desarrollo de nuevas empresas contribuye decisivamente a lograr el deseado bienestar para la sociedad, dado que permite incrementar el nivel de empleo, impulsar la innovación y mejorar la competitividad” (Acs, Audretch, & Braunerhjelm, 2006, pág. 83). La investigación abarca la búsqueda de competencias a nivel mundial basándose en estudios realizados por diferentes autores (Alles, Durán, Goleman, Shipmann, Varela, Boyatsis, Mc. Clelland y Blancero). El objetivo es desarrollar un instrumento que permita recolectar información de emprendedores bogotanos exitosos, con base en la clasificación de competencias que se realice a lo largo de la investigación.

Key competences in the new ventures: a model for evaluating

This research studies from an internal view based on the Competency-Based Perspective (CBP), key organizational competencies developed for small new business. CBP is chosen in an attempt to explain the differences characterizing the closed companies from the consolidated ones. The main contribution of this paper is the definition of a set of key organizational competencies for new ventures from services and low technology based sectors. Using the classification proposed by [1] and a review of the entrepreneurship literature, the main competencies were defined and classified as: managerial, input-based, transformation-based, and output-based competencies. The proposed model for evaluating new ventures organizational competence is tested by means of Structural Equation

A model for evaluation of generic competences in engineering: application to the problem. Solving competence at the technical University of Madrid.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help teachers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with a two-fold objective: a) To develop a model for teaching and evaluating core competences that is useful and easily applicable to its different degrees, and b) to provide support to teachers by creating an area within the Website for Educational Innovation where they can search for information on the model corresponding to each core competence approved by UPM. Information available on each competence includes its definition, the formulation of indicators providing evidence on the level of acquisition, the recommended teaching and evaluation methodology, examples of evaluation rules for the different levels of competence acquisition, and descriptions of best practices. These best practices correspond to pilot tests applied to several of the academic subjects conducted at UPM in order to validate the model. This work describes the general procedure that was used and presents the model developed specifically for the problem-solving competence. Some of the pilot experiences are also summarised and their results analysed

A model for evaluation of generic competences in engineering: application to the problem-solving competence at UPM.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help teachers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with a two-fold objective: a) To develop a model for teaching and evaluating core competences that is useful and easily applicable to its different degrees, and b) to provide support to teachers by creating an area within the Website for Educational Innovation where they can search for information on the model corresponding to each core competence approved by UPM. Information available on each competence includes its definition, the formulation of indicators providing evidence on the level of acquisition, the recommended teaching and evaluation methodology, examples of evaluation rules for the different levels of competence acquisition, and descriptions of best practices. These best practices correspond to pilot tests applied to several of the academic subjects conducted at UPM in order to validate the model. This work describes the general procedure that was used and presents the model developed specifically for the problem-solving competence. Some of the pilot experiences are also summarised and their results analysed

Operational Flexibility: A Model for Effective Project Management

The aim of this study is to investigate the role of operational flexibility for effective project management in the construction industry. The specific objectives are to: a) Identify the determinants of operational flexibility potential in construction project management b) Investigate the contribution of each of the determinants to operational flexibility potential in the construction industry c) Investigate on the moderating factors of operational flexibility potential in a construction project environment d) Investigate whether moderated operational flexibility potential mediates the path between predictors and effective construction project management e) Develop and test a conceptual model of achieving operational flexibility for effective project management The purpose of this study is to findout ways to utilize flexibility inorder to manage uncertain project environment and ultimately achieve effective project management. In what configuration these operational flexibility determinants are demanded by construction project environment in order to achieve project success. This research was conducted in three phases, namely: (i) exploratory phase (ii) questionnaire development phase; and (iii) data collection and analysis phase. The study needs firm level analysis and therefore real estate developers who are members of CREDAI, Kerala Chapter were considered. This study provides a framework on the functioning of operational flexibility, offering guidance to researchers and practitioners for discovering means to gain operational flexibility in construction firms. The findings provide an empirical understanding on kinds of resources and capabilities a construction firm must accumulate to respond flexibly to the changing project environment offering practitioners insights into practices that build firms operational flexibility potential. Firms are dealing with complex, continuous changing and uncertain environments due trends of globalization, technical changes and innovations and changes in the customers’ needs and expectations. To cope with the increasingly uncertain and quickly changing environment firms strive for flexibility. To achieve the level of flexibility that adds value to the customers, firms should look to flexibility from a day to day operational perspective. Each dimension of operational flexibility is derived from competences and capabilities. In this thesis only the influence on customer satisfaction and learning exploitation of flexibility dimensions which directly add value in the customers eyes are studied to answer the followingresearch questions: “What is the impact of operational flexibility on customer satisfaction?.” What are the predictors of operational flexibility in construction industry? .These questions can only be answered after answering the questions like “Why do firms need operational flexibility?” and “how can firms achieve operational flexibility?” in the context of the construction industry. The need for construction firms to be flexible, via the effective utilization of organizational resources and capabilities for improved responsiveness, is important because of the increasing rate of changes in the business environment within which they operate. Achieving operational flexibility is also important because it has a significant correlation with a project effectiveness and hence a firm’s turnover. It is essential for academics and practitioners to recognize that the attainment of operational flexibility involves different types namely: (i) Modification (ii) new product development and (iii) demand management requires different configurations of predictors (i.e., resources, capabilities and strategies). Construction firms should consider these relationships and implement appropriate management practices for developing and configuring the right kind of resources, capabilities and strategies towards achieving different operational flexibility types.

Generic competences in engineering field: a comparative study between Latin America and European Union

In this work, a comparison between the competences codes in the CDIÓs* curriculum, the ones defined for the Tunning Project and the International Project Management Association (IPMA) is made. The goal is to define the most appropriate competences codes for the engineering education in Latin America. The CDIO code is obtained from the engineering practice, and responds to the Accreditation Board for Engineering and Technology (ABET) standards of accreditation. The Tuning competences are the ones defined for Latin America and the IPMÁs are international competences for project management. It is the first time that the competences defined in ABET accreditation standards in the engineering field are compared with the international competences according to IPMÁs model. The results give evidence that, in first place, there is a need to apply holistic models in the definition of an engineering curriculum. Second, the pertinence of these models in the definition of engineering programs in Latin America.

An example of Learning based on competences: Use of Maxima in Linear Algebra for Engineers

This paper analyzes the role of Computer Algebra Systems (CAS) in a model of learning based on competences. The proposal is an e-learning model Linear Algebra course for Engineering, which includes the use of a CAS (Maxima) and focuses on problem solving. A reference model has been taken from the Spanish Open University. The proper use of CAS is defined as an indicator of the generic ompetence: Use of Technology. Additionally, we show that using CAS could help to enhance the following generic competences: Self Learning, Planning and Organization, Communication and Writing, Mathematical and Technical Writing, Information Management and Critical Thinking.

Development of a model of cross-curricular competencies of students at the Technical University of Madrid

It is known that cross-curricular competences are required for main companies all over the world to be part of our university graduates as technical knowledge does. That is the reason which has led the university structure to include these competences in the every degree curriculo validated since the European Higher Education Area (EHEA)was introduced in the Spanish university context. But the way used for incorporating them has been developed without the necessary guidelines to generate a qualified model.

Integrating Generic Competences into Engineering Curricula

The new degrees in Spanish universities generated as a result of the Bologna process, stress a new dimension: the generic competencies to be acquired by university students (leadership, problem solving, respect for the environment, etc.). At Universidad Polite¿cnica de Madrid a teaching model was defined for two degrees: Graduate in Computer Engineering and Graduate in Software Engineering. Such model incorporates the training, development and assessment of generic competencies planned in these curricula. The aim of this paper is to describe how this model was implemented in both degrees. The model has three components. The first refers to a set of seven activities for introducing mechanisms for training, development and assessment of generic competencies. The second component aims to coordinate actions that implement the competencies across courses (in space and time). The third component consists of a series of activities to perform quality control. The implementation of generic competencies was carried out in first year courses (first and second semesters), together with the planning for second year courses (third and fourth semesters). We managed to involve a high percentage of first-year courses (80%) and the contacts that have been initiated suggest a high percentage in the second year as well.

Higher education in industrial engineering in Peru: towards a new model based on skills

This article analyzes the progress of Industrial Engineering in Peru, the relationship to major trends in Europe and North America, and the projected outlook for the future. It is determined that the need for this engineering specialty includes a significant degree of resource management, and the formation of engineers through education requires not only the acquisition and strengthening of technical knowledge, but also the development of the competences that are required by both employers and the recipients of the benefits of engineering: society. Conclusions have been drawn based on state-of-the-art analyses from Europe and North America, and definitions of trends for engineering.

Assessment of University External Internships. Towards a Mixed Model for Measuring the Acquisition of Skills and the Satisfaction of Parties Involved

The continuous improvement of management and assessment processes for curricular external internships has led a group of university teachers specialised in this area to develop a mixed model of measurement that combines the verification of skill acquisition by those students choosing external internships with the satisfaction of the parties involved in that process. They included academics, educational tutors of companies and organisations and administration and services personnel in the latter category. The experience, developed within University of Alicante, has been carried out in the degrees of Business Administration and Management, Business Studies, Economics, Advertising and Public Relations, Sociology and Social Work, all part of the Faculty of Economics and Business. By designing and managing closed standardised interviews and other research tools, validated outside the centre, a system of continuous improvement and quality assurance has been created, clearly contributing to the gradual increase in the number of students with internships in this Faculty, as well as to the improvement in satisfaction, efficiency and efficacy indicators at a global level. As this experience of educational innovation has shown, the acquisition of curricular knowledge, skills, abilities and competences by the students is directly correlated with the satisfaction of those parties involved in a process that takes the student beyond the physical borders of a university campus. Ensuring the latter is a task made easier by the implementation of a mixed assessment method, combining continuous and final assessment, and characterised by its rigorousness and simple management. This report presents that model, subject in turn to a persistent and continuous control, a model all parties involved in the external internships are taking part of. Its short-term results imply an increase, estimated at 15% for the last course, in the number of students choosing curricular internships and, for the medium and long-term, a major interweaving between the academic world and its social and productive environment, both in the business and institutional areas. The potentiality of this assessment model does not lie only in the quality of its measurement tools, but also in the effects from its use in the various groups and in the actions that are carried out as a result of its implementation and which, without any doubt and as it is shown below, are the real guarantee of a continuous improvement.

The production of a framework of competences for pharmacy practice in the European Union:the PHAR-QA project

Background and objectives: The goal of the PHAR-QA (Qualityassurance in European pharmacy education and training) project isthe production of a European framework of competences for pharmacypractice. This PHAR-QA framework (www.phar-qa.eu) will beEuropean and consultative i.e. it will be used for harmonization—butwill not to replace existing national QA systems.Methods: Using the proposals for competences produced by the previousPHARMINE(Pharmacy education in Europe; www.pharmine.eu) project, together with those of other sources, the authors produced a listof 68 personal and patient care competencies. Using internet surveytools the stakeholders—European pharmacy community (universitydepartment staff and students, community, hospital and industrialpharmacists, as well as pharmacists working in clinical biology andother branches, together with representatives of chambers and associations)—were invited to rank the proposals and add comments.Results and conclusions: Pharmacology and pharmacotherapy togetherwith competences such as ‘‘supply of appropriate medicinestaking into account dose, correct formulation, concentration, administrationroute and timing’’ ranked high. Other topics such as ‘‘currentknowledge of design, synthesis, isolation, characterisation and biologicalevaluation of active substances’’ ranked lower.Implications for practice: In the short term, it is anticipated that thissurvey will stimulate a productive discussion on pharmacy educationand practice by the various stakeholders. In the long term, thisframework could serve as a European model framework of competencesfor pharmacy practice.Acknowledgements: With the support of the Lifelong Learningprogramme of the European Union: 527194-LLP-1-2012-1-BEERASMUS-EMCR. This publication reflects the views only of theauthors; the Commission cannot be held responsible for any usewhich may be made of the information contained therein.

Clinical education reflective ecological model for health science majors

The clinical education is an integral part of the Health Science majors’ curriculum programs of the University of Aveiro’s School of Health (i.e., Nursing, Physical Therapy, Radiology, Radiotherapy and Speech-Language Pathology) and aims to develop clinical competences in order to generate excellent health care professionals. The organization was based on the Ecological Model of Clinical-Reflective Training, which was characterized by inter-institutional interaction and student’s reflection on actions on a professional setting. This study encompassed two moments of clinical internships in the Nursing, Physical Therapy, Radiology and Radiotherapy majors. The Clinical Internship I provided the 123 students with a global view of the health care professional activities. The Clinical Internship II, with 119 students, developed competences of each health professional. Questionnaires with categorical scales from 1 to 5 evaluated the organization and efficiency of the two internships. The results revealed averages over 3 in all items. In conclusion, the Ecological Model of Clinical-Reflective Training was well accepted by students and clinical supervisors. Applications in the health care area were demonstrated.