Decorative tiles between Brazil and Europe: the case of the Santa Catharina factory

Abstract It was in the first decade of the twentieth century that the first white china Factory was implemented in Brazil. Fruit of the association between the Sao Paulo Aristocracy and the Italian Romeo Ranzini, this factory was responsible for producing significant amounts of crockery in industrial moulds in sao Paulo, Brazil. It was also the first factory to produce decorative tiles that would be part of the architecture of the public buildings built between 1919 and 1922 in Commemoration of the Centennial of the Brazilian Independence. Known as The Santa Catharina Factory, this factory was inaugurated in 1913 with the participation of Italian immigrants and German technologies for the development of its first manufacturing activities. As a result of a number of economic, political and social matters that started in the previous century in the city of Sao Paulo, The Santa Catharina factory played an important role in industrial development as regards the production of national white china and was used as a model for the construction of new ceramic factories in Sao Paulo. After acquired by Matarazzo industries in 1927, had closed their activities in 1937. This research is based on the identification and analysis of the first tiles produced in Brazil by the Santa Catharina Factory, which were part of the architectural decorations of the buildings built in Sao Paulo to the celebration of the Centennial of the Brazilian Independence. Designed by Victor Dubugras, The Largo da Memoria (located in the city of Sao Paulo) and the buildings located in the "Paths of the Sea" road marked the beginning of Brazilian industrialization and the emergence of Neocolonial Movement in architecture of Sao Paulo. Studies of the first national patterns of decorative tiles approach a subject poorly researched by experts in tiled studies in Brazil, although in this case these tiles have represented not only an important milestone in the national industrialization, but also have demarcated the significant changes in architectural and decorative practices in the country in the early twentieth century; RESUMÈ: C'est durant la premiere decennie du XXe siecle que la premiere usine de porcelaine blanche fut implant& au Bresil. Elle fut le fruit de l'association entre l'aristocratie de Sao Paulo et l'italien Romeo Ranzini. L'usine produisait une quantite signifiante de porcelaine sur le territoire industriel de Sao Paulo. Ce fut egalement la premiere usine a produire des carreaux decoratifs qui sont aujourd'hui visibles dans l'architecture des batiments publics construit entre 1919 et 1922, pour la commemoration du centenaire de l'independance bresilienne. Connue sous le nom de Santa Catharina, cette usine fut inaugure en 1912. Elle fut construite par des émigrés Italiens, et utilisa pour la technologie allemande pour so production. En tant que resultat d'un certain nombre de questions economiques, politiques et sociales qui ont &butes durant le siecle precedent dans la ville de Sao Paulo, l'usine Santa Catharina a joue un role important dans le developpement industriel de la production de porcelaine blanche nationale et a ete utilise comme modele pour la construction de nouvelles usines de ceramique a Sao Paulo. Apres avoir ete achete par l'industrie Matarazzo en 1927, elle cessa ses activites en 1937. Cette recherche est basee sur l'identification et l'analyse des premiers carreaux decoratifs fabriques au Bresil par l'usine Santa Catharina, qui etait une partie des decorations architecturales des batiments construits a Sao Paulo pour la celebration du centenaire de l'Independance Bresilienne. Connue par Victor Dubugras, le "Largo da Memoria" (situe dans la ville de Sao Paulo), et les batiments situes sur le "Path of the Sea", ont marque le debut de l'industrialisation bresilienne et l'emergence d'un mouvement neocolonialiste dans l'architecture de Sao Paolo. L'etude des premiers modeles nationaux de carreaux decoratifs est un sujet peut etudie par les experts bresiliens, bien qu'ils furent un jalon importante pour l'industrialisation nationale. Its ont egalement entrains des changements importants dans les pratiques architecturales, et decoratives au sein du pays au XXe siecle. Mots-cles: Ceramique - carreaux decoratifs — L'usine Santa Catharina, Bresil - Production de carreaux; RIASSUNTO: Nel primo decennio del Novecento vide luce la prima fabbrica di ceramica di porcellana in Brasile. Frutto dell'associazione tra l'aristocrazia Paulista e l'italiano Romeo Ranzini, questa fabbrica fu responsabile della produzione di notevoli quantita di ceramica di porcellana mediante stampi industriali nella citta di San Paolo, Brasile. Fu anche la prima fabbrica a produrre azulejos che avrebbero poi fatto parte dell'architettura degli edifici pubblici costruiti tra it 1919 ed it 1922, per la commemorazione del Centenario dell'indipendenza Brasiliana. Conosciuta come Fabbrica di Santa Catharina, questa fu inaugurata nel 1913, con la partecipazione di immigrati italiani e con l'impiego di tecnologie tedesche per lo sviluppo delle sue prime attivita produttive. Risultato di una serie di cambiamenti economici, politici e sociali, che ebbero inizio nel secolo precedente nella citta di San Paolo, la Fabbrica di Santa Catharina svolse un ruolo importante nello sviluppo industriale per quanto riguarda la produzione di ceramica di porcellana nazionale e fu adottata come modello per la costruzione di nuove fabbriche a San Paolo. Successivamente, fu acquisita dalle industrie Matarazzo nel 1927, vedendo poi chiudersi le sue attivita nel 1937. Questa ricerca si basa sull'identificazione e l'analisi dei primi azulejos prodotti in Brasile dalla Fabbrica di Santa Catharina che fecero parte delle decorazioni architettoniche degli edifici costruiti a San Paolo per la commemorazione del Centenario dell'indipendenza Brasiliana. Progettati da Victor Dubugras, it Largo da Mem(Via (situato nella citta di San Paolo) e gli edifici che si trovano nei Caminhos do Mar marcarono l'inizio dell'industrializzazione brasiliana e la nascita del Movimento Neocolonial dell'architettura Paulista. Gli studi dei primi modelli di azulejos nazionali affrontano un argomento poco studiato dagli esperti in azulejaria in Brasile, nonostante rappresentino un importante avvenimento dell'industrializzazione nazionale, ma segnano anche i cambiamenti di significative pratiche architettoniche e decorative nel Paese nel primo Novecento. Parole chiave: Ceramica - porcellana - La fabbrica di Santa Catharina - Produzione di ceramica .

Leadless decorative tiles, faience, and mosaic, comprising notes and excerpts on the history, materials, manufacture & use of ornamental flooring tiles, ceramic mosaic, and decorative tiles and faience, with complete series of recipes for tile-bodies, and for leadless glazes and art-tile enamels,

Mode of access: Internet.

Chemical and mineralogical characterization of portuguese ceramic tiles in the historic center of São Luís do Maranhão (Brazil): an approximation of the mineralogy and firing temperature of the raw materials

Nesse trabalho, foram caracterizados, pela primeira vez, azulejos históricos portugueses do Centro Histórico de São Luís (CHSL) do Maranhão. A caracterização foi realizada através dos ensaios de microscopia ótica, difração de raios X (DRX) e análise química, visando ao uso dessa informação para a determinação das possíveis matérias-primas utilizadas na sua fabricação, bem como a provável temperatura de queima desses materiais. Os resultados mostraram que a microestrutura desses materiais é constituída por poros de tamanhos variados, apresentando incrustações de calcita e grãos de quartzo de tamanhos inferiores a 500 µm, distribuídos numa matriz de cor rosa-amarelo, onde foram identificadas, por DRX, as fases minerais calcita, gelhenita, wollastonita, quartzo e amorfo. A partir da informação obtida, é possível inferir que as matérias-primas originais estiveram constituídas, provavelmente, por mistura de argilas caoliníticas (Al₂O₃•2SiO,₂•2H₂O), ricas em carbonatos de cálcio e quartzo ou misturas de argilas caoliniticas, quartzo e calcita. Essas matérias-primas originais não atingiram a temperatura de cocção de 950ºC.

Anomaly diagnosis in ceramic claddings by thermography - A review

With the increasing importance given to building rehabilitation comes the need to create simple, fast and non-destructive testing methods (NDT) to identify problems and for anomaly diagnosis. Ceramic tiles are one of the most typical kinds of exterior wall cladding in several countries; the earliest known examples are Egyptian dating from 4000 BC. This type of building facade coating, though being quite often used in due to its aesthetic and architectural characteristics, is one of the most complex that can be applied given the several parts from which it is composed; hence, it is also one of the most difficult to correctly diagnose with expeditious methods. The detachment of ceramic wall tiles is probably the most common and difficult to identify anomaly associated with this kind of cladding and it is also definitely the one that can compromise security the most. Thus, it is necessary to study a process of inspection more efficient and economic than the currently used which often consist in semi-destructive methods (the most common is the pull off test), that can only be used in a small part of the building at a time, allowing some assumptions of what can the rest of the cladding be like. Infrared thermography (IRT) is a NDT with a wide variety of applications in building inspection that is becoming commonly used to identify anomalies related with thermal variations in the inspected surfaces. Few authors have studied the application of IRT in anomalies associated with ceramic claddings claiming that the presence of air or water beneath the superficial layer will influence the heat transfer in a way that can be detected in both a qualitative and a quantitative way by the thermal camera, providing information about the state of the wall in a much broad area per trial than other methods commonly used nowadays. This article intends to present a review of the state of art of this NDT and its potentiality in becoming a more efficient way to diagnose anomalies in ceramic wall claddings.

Fungal Planet description sheets: 128-153

Novel species of microfungi described in the present study include the following from Australia: Catenulostroma corymbiae from Corymbia, Devriesia stirlingiae from Stirlingia, Penidiella carpentariae from Carpentaria, Phaeococcomyces eucalypti from Eucalyptus, Phialophora livistonae from Livistona, Phyllosticta aristolochiicola from Aristolochia, Clitopilus austroprunulus on sclerophyll forest litter of Eucalyptus regnans and Toxicocladosporium posoqueriae from Posoqueria. Several species are also described from South Africa, namely: Ceramothyrium podocarpi from Podocarpus, Cercospora chrysanthemoides from Chrysanthemoides, Devriesia shakazului from Aloe, Penidiella drakensbergensis from Protea, Strelitziana cliviae from Clivia and Zasmidium syzygii from Syzygium. Other species include Bipolaris microstegii from Microstegium and Synchaetomella acerina from Acer (USA), Brunneiapiospora austropalmicola from Rhopalostylis (New Zealand), Calonectria pentaseptata from Eucalyptus and Macadamia (Vietnam), Ceramothyrium melastoma from Melastoma (Indonesia), Collembolispora aristata from stream foam (Czech Republic), Devriesia imbrexigena from glazed decorative tiles (Portugal), Microcyclospora rhoicola from Rhus (Canada), Seiridium phylicae from Phylica (Tristan de Cunha, Inaccessible Island), Passalora lobeliaefistulosis from Lobelia (Brazil) and Zymoseptoria verkleyi from Poa (The Netherlands). Valsalnicola represents a new ascomycete genus from Alnus (Austria) and Parapenidiella a new hyphomycete genus from Eucalyptus (Australia). Morphological and culture characteristics along with ITS DNA barcodes are also provided. © 2012 Nationaal Herbarium Nederland & Centraalbureau voor Schimmelcultures.

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Análise da adição de resíduo oriundo do tratamento de esgotos em massa cerâmica utilizada para fabricação de telhas

Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles

Análise comparativa do ambiente de aviários de postura com diferentes sistemas de acondicionamento

Poulty house typology and the materials used (mainly for roofing) are the determining factors for an appropriate thermal condition aiming at production. In this context, the main point of this paper was to identify differences in the internal environment of two poultry houses, using monitoring and afterwards using statistics for comparing the environmental variables. The data analyzed did not show evidence of better thermal comfort for the house which was covered with ceramic roofing tile, because this house did not have ridged vents, making the hot air exit from the house difficult by the chimney effect. The ammonia concentration measured inside both houses was within the comfort limit. The temperature and humidity index of the house covered with ceramic roofing tiles was higher than the house which was covered with cement asbestos roofing tile, even though lower temperature on the tiles' surfaces was verified, showing the positive effects of the use of ridge vents at the housing. Based on the results obtained it is recommended for the Bastos, SP region, that poulty houses should be built with the ridge vent and long eaves beyond the roof of ceramic tiles.

Caracterização química e mineralógica de azulejos portugueses do centro histórico de São Luís-MA (Brasil): Uma aproximação à mineralogia e à temperatura de queima das matérias-primas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Argilas da formação Corumbataí como base para obtenção de grés porcelanato por via seca

Pós-graduação em Geologia Regional - IGCE

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results