996 resultados para Central points
Resumo:
The production of ethyl esters by alcoholysis is an alternative for splitting triacylglycerols due to the possibility of using low temperatures, which results in oxidative protection of the polyunsaturated fatty acids. Ethyl esters produced under mild conditions of temperature could be used as substrate for obtaining structured lipids. The reaction parameters of production of ethyl esters from fish oil with high content of omega-3 fatty acids by alcoholysis were optimized using response surface methodology. An experimental design (2³) (with levels +1 and -1, six axial points with levels -alpha and +alpha and three central points) was applied. The variables investigated were concentration of catalyst, amount of ethyl alcohol and temperature. Ethyl ester conversion was monitored by high performance size exclusion chromatography (HPSEC) and the best result obtained was 95% conversion rate. The optimal conditions were 40 °C, 1% of NaOH and 36% of ethanol.
Resumo:
A full factorial design 2³ was used to evaluate the effect of process variables in chemical peeling of yacon roots, cultivated in Curitiba, State of Paraná. Eleven treatments, with three central points, were done in which they had been evaluated at three different levels of sodium hydroxide solution, % (g/100 mL) [6, 10, 14], temperature of the same solution, °C [70, 80, 90], and residence time in the sodium hydroxide solution, minutes [2, 4, 6]. All the studied variables had affected significantly (p<0.05) the yield of yacon roots subjected to chemical peeling. The variable that most affected the yield was the time of permanence in the sodium hydroxide solution. The mathematical model obtained for the yield (%) was good with R² aj = 0.8497, and non significant lack of fit (p=0.9312).Therefore, the model can be used for predictive purposes. In the central point a satisfactory yield (84% to 87%) with a high percentage of removed peel was obtained (96% to 98%) indicating that the treatment with 10% of sodium hydroxide solution, temperature of 80º C per 4 minutes can be used in the chemical peeling of yacon roots.
Resumo:
[Excerpt] The aim of this research was to evaluate the influence of temperature, time and mass/ volume ratio on the release of sugars and polyphenols using an autohydrolysis procedure from pineapple waste. A Box-Bhenken design was used with three factors (time, temperature and mass/volume ratio) and three levels was used. All treatments were performed in triplicate. Nine central points were used. For autohydrlosysis treatments, an oil bath was used [1]. After autohydrolysis, liquid phases or hydrolysates were analyzed for glucose and fructose concentration by high performance liquid chromatography (HPLC) [2]. The FolinCiocalteu assay was used to measure total polyphenols of hydrolysates [3] and HPLC to identify these molecules [4]. (...)
Resumo:
This thesis consists of four articles and an introductory section. The main research questions in all the articles are about proportionality and party success in Europe, at European, national or district levels. Proportionality in this thesis denotes the proximity of seat shares parties receive compared to their respective vote shares, after the electoral system’s allocation process. This proportionality can be measured through numerous indices that illustrate either the overall proportionality of an electoral system or a particular election. The correspondence of a single party’s seat shares to its vote shares can also be measured. The overall proportionality is essential in three of the articles (1, 2 and 4), where the system’s performance is studied by means of plots. In article 3, minority party success is measured by advantage-ratios that reveal single party’s winnings or losses in the votes to seat allocation process. The first article asks how proportional are the European parliamentary (EP) electoral systems, how do they compare with results gained from earlier studies and how do the EP electoral systems treat different sized parties. The reasons for different outcomes are looked for in explanations given by traditional electoral studies i.e. electoral system variables. The countries studied (EU15) apply electoral systems that vary in many important aspects, even though a certain amount of uniformity has been aspired to for decades. Since the electoral systems of the EP elections closely resemble the national elections, the same kinds of profiles emerge as in the national elections. The electoral systems indeed treat the parties differentially and six different profile types can be found. The counting method seems to somewhat determine the profile group, but the strongest variables determining the shape of a countries’ profile appears to be the average district magnitude and number of seats allocated to each country. The second article also focuses on overall proportionality performance of an electoral system, but here the focus is on the impact of electoral system changes. I have developed a new method of visualizing some previously used indices and some new indices for this purpose. The aim is to draw a comparable picture of these electoral systems’ changes and their effects. The cases, which illustrate this method, are four elections systems, where a change has occurred in one of the system variables, while the rest remained unchanged. The studied cases include the French, Greek and British European parliamentary systems and the Swedish national parliamentary system. The changed variables are electoral type (plurality changed to PR in the UK), magnitude (France splitting the nationwide district into eight smaller districts), legal threshold (Greece introducing a three percent threshold) and counting method (d’Hondt was changed to modified Sainte-Laguë in Sweden). The radar plots from elections after and before the changes are drawn for all country cases. When quantifying the change, the change in the plots area that is created has also been calculated. Using these radar plots we can observe that the change in electoral system type, magnitude, and also to some extent legal threshold had an effect on overall proportionality and accessibility for small parties, while the change between the two highest averages counting method had none. The third article studies the success minority parties have had in nine electoral systems in European heterogeneous countries. This article aims to add more motivation as to why we should care how different sized parties are treated by the electoral systems. Since many of the parties that aspire to represent minorities in European countries are small, the possibilities for small parties are highlighted. The theory of consociational (or power-sharing) democracy suggests that, in heterogeneous societies, a proportional electoral system will provide the fairest treatment of minority parties. The OSCE Lund Recommendations propose a number of electoral system features, which would improve minority representation. In this article some party variables, namely the unity of the minority parties and the geographical concentration of the minorities were included among possible explanations. The conclusions are that the central points affecting minority success were indeed these non-electoral system variables rather than the electoral system itself. Moreover, the size of the party was a major factor governing success in all the systems investigated; large parties benefited in all the studied electoral systems. In the fourth article the proportionality profiles are again applied, but this time to district level results in Finnish parliamentary elections. The level of proportionality distortion is also studied by way of indices. The average magnitudes during the studied periodrange from 7.5 to 26.2 in the Finnish electoral districts and this opens up unequal opportunities for parties in different districts and affects the shape of the profiles. The intra-country case allows the focus to be placed on the effect of district magnitude, since all other electoral systems are kept constant in an intra-country study. The time span in the study is from 1962 to 2007, i.e. the time that the districts have largely been the same geographically. The plots and indices tell the same story, district magnitude and electoral alliances matter. The district magnitude is connected to the overall proportionality of the electoral districts according to both indices, and the profiles are, as expected, also closer to perfect proportionality in large districts. Alliances have helped some small parties to gain a much higher seat share than their respective vote share and these successes affect some of the profiles. The profiles also show a consistent pattern of benefits for the small parties who ally with the larger parties.
Resumo:
The production of ethyl esters by alcoholysis is an alternative for splitting triacylglycerols due to the possibility of using low temperatures, which results in oxidative protection of the polyunsaturated fatty acids. Ethyl esters produced under mild conditions of temperature could be used as substrate for obtaining structured lipids. The reaction parameters of production of ethyl esters from fish oil with high content of omega-3 fatty acids by alcoholysis were optimized using response surface methodology. An experimental design (2³) (with levels +1 and -1, six axial points with levels -alpha and +alpha and three central points) was applied. The variables investigated were concentration of catalyst, amount of ethyl alcohol and temperature. Ethyl ester conversion was monitored by high performance size exclusion chromatography (HPSEC) and the best result obtained was 95% conversion rate. The optimal conditions were 40 °C, 1% of NaOH and 36% of ethanol.
Resumo:
In order to reduce the total number of experiments for achieving the highest amount of adsorbed Cu2+ (qmax) using pecan nutshells (Carya illinoensis) as biosorbent, a full 2(4) factorial design with two central points was carried out (mass of biosorbent- m, pH, initial metallic ion concentration- C0, time of contact- t). In order to continue the optimization of the system, a central composite surface analysis design with two factors and five central points was carried out. The maximum amount of Cu2+ taken up by the pecan nutshells was 20 mg g-1. These results were confirmed by determining a Cu2+ isotherm using the best conditions attained by the statistical design of experiments.
Resumo:
The effect of precursors on the anticancer alkaloid production by submerged fermentation using M. anisopliae 3935 was studied, according to complete experimental design 2² with three central points. The results showed that lysine was the most important variable, however, when both lysine and glucose were added to the fermentation medium, the alkaloid production reached, approximately, 17 mg L-1 after 120 hours of fermentation. Then, the scale-up of the process was carried out and these results were confirmed. Finally, 35 mg L-1 of alkaloid at 192 h were attained after increment of added aminoacid lysine.
Resumo:
For the paper mill profitability it is crucial to minimize overproduction and underproduction. Overproduction and underproduction both generate undesired costs and profit losses in paper mill production. This master’s thesis examines paper production order fulfillment subject from paper production level point of view. Research and development approach is selected due to clarification requirements in lately implemented manufacturing execution system. Manufacturing execution systems are generally expected to offer reliable and accurate information about mill production details. However, confusions are likely to occur after implementation of new manufacturing execution system. These confusions are usually harmful and become cumulatively more influential the longer they keep occurring. In this master’s thesis is presented actions to improve order fulfillment at paper mill production level. Central points of the improvement actions are a model for successful order fulfillment in paper mill production and manufacturing execution system catalogue configuration redesign. Improvement actions are implemented in Jokilaakso paper production plant and it is examined as a case study. In the end of this master’s thesis is presented performance measurements which demonstrate order fulfillment from case Jokilaakso.
Resumo:
Blends of fiber from sugar cane bagasse, corn starch, and whey protein concentrate were extruded. A single screw extruder, equipped with a screw at a constant compression ratio of 1:1 and a die diameter of 3 mm, was used. The best processing conditions were determined according to a central composite rotatable design (α = 1.41) with 5 central points, which gives a total of 13 tests. During the extrusion process the content of insoluble fiber decreased and that of soluble fiber increased. An increase in the contents of fiber and in the barrel temperature resulted in a decrease in the expansion index values and an increase in the water absorption index values; whereas in blends with intermediate fiber contents the effects in these parameters were found to be the opposite. High fiber contents increased penetration force but decreased luminosity, water solubility index values and the adhesive force in gels. The extrusion process improved the functional properties of sugarcane fiber bagasse enabling its addition to diverse alimentary systems.
Resumo:
Umbu pulp is an important product in the economy of the northeastern region of Brazil, and its preservation can be ensured by heat treatment. A complete factorial design with 2 factors (time and temperature) and 3 central points was used to verify the effect of the HTST process on the physicochemical, chemical, physical, microbiological, and sensory qualities of umbu pulps. The results showed that the heat treatments applied resulted in products without significant alterations on the physicochemical, chemical, and microbiological characteristics. With respect to color, the parameters L and a* were altered by increases in temperature indicating by darkening of color. The sensory evaluation indicated that a treatment of 88 °C for 10 seconds was the best processing condition due to the greater similarity of the resulting product to the reference sample (blanched pulp).
Resumo:
Many pr oblems present themselves in at tempting t o discuss Marx's noti on of the fetish characteristics of commodities. It has been argued that it is one of the central points of Marx's en tir e c or pus. 1 It has also been argued that it i s merely "a brilli an t s oci olog i cal genera lization l ! and, even furth er, that it is an Hi ndependent and separate entity, internally hardly related t o Marx's economic theory" .2 How could such a theory be understo od i n such drastically diff erent ways? Perhaps the clue is to be f ound somewhere in Marx' s discussion of the fetishism of commodities itself. Because of the difficulty in un derstanding fetishism , I intend t o examine what Marx himself has t o say first befor e dealing with any points related to the notion of fetishism. Thus , the first parts of this thesis will c onsist of l ong qu otations and repetition of what Marx has t o say. If a noti on may be called ' central' and yet 'hardly related' t o Marx's wor k at the same time, surely a clear examination of this section is necess ary. Aft er an examination of the initial secti ons of Cae ital ] I intend t G examine the f ollowing : the r e lation of fetishism t o the t he ory of alienati on; how one may regard f etishism as a pr oblem f or philosophy; and how, in f act, the theory of fetishism is of prime imp ortance f or an understan ding of Marx's wr itings. What I want to stress throughout is that with o u~ an understanding of what is inherent in the pr oduction of the commodity causing i t t o be necessarily fetishistic, it is practically imp ossible t o understand much of Marx's other writin gs. A commodity appears, at fir st sight, a very trivial thing and easi ly un derst ood. Itsanalysis shows that it i s , in r eality , a very queer thing , abo unding in ~taphysical s ubtleties and theological nic eties .
Resumo:
Il existe actuellement des différends frontaliers entre les États circumpolaires-Nord qui entravent la bonne gouvernance de la région. Afin d'identifier des pistes de solution pour améliorer la gouvernance en Arctique et faciliter la coopération, nous analysons le processus qui a mené, à l'autre pôle, à la création du Traité sur l’Antarctique de 1959. Nous utilisons une approche néolibérale institutionnelle comme cadre théorique ainsi qu’une méthodologie basée sur le traçage de processus. Nous avons identifié quatre variables (les intérêts des États, le contexte politique, le leadership, et l’Année géophysique internationale [AGI]) que nous avons étudiés au cours de trois périodes historiques et dont l’évolution a contribué à la formation du régime antarctique. Les étapes menant à l'élaboration d'un régime identifié dans la théorie institutionnaliste dynamique de Frischmann s'appliquent aux différentes périodes que nous avons déterminées. La première période historique correspond à l'identification du problème d'interdépendance. Les États ont d’abord tenté d’assouvir leurs intérêts particuliers envers le continent antarctique par l’intermédiaire de stratégies individuelles. Le statut imprécis du continent antarctique caractérisé par des revendications territoriales conflictuelles, la volonté des superpuissances d’effectuer d’éventuelles revendications territoriales et le leadership exercé par les États-Unis ont toutefois permis de faire évoluer les États vers des stratégies coopératives. La deuxième période historique correspond à l'étape de la négociation de l’entente. Le leadership d’un groupe de scientifiques et des États-Unis ainsi que le contexte politique de la Guerre froide ont favorisé la cohésion des États intéressés par les affaires antarctiques et leur investissement dans une coopération multilatérale souple dans le cadre d’un événement ponctuel, l’AGI. La troisième période correspond à la mise en oeuvre de l’entente, soit l’AGI. Lors de cet événement, une entente tacite, un engagement d’honneur, qui suspendait les considérations territoriales en Antarctique, a été respectée par les parties. La coopération dans le cadre de l’AGI s’est avérée un succès. Les États se sont montrés satisfaits des gains que comportait la coopération scientifique dans un environnement pacifique. L’AGI a permis aux États d’expérimenter la coopération multilatérale et d’observer le comportement des autres participants au sein de l’institution. En raison de la satisfaction des États vis-à-vis la coopération dans le cadre de l'entente souple, l'élaboration du traité de 1959 a été facilitée. Notre étude nous a permis d’identifier des éléments clefs qui ont favorisé la formation du régime antarctique et qui pourraient servir d’inspiration pour l'élaboration de futurs régimes. La présence d’un leadership tout au long du processus a permis de promouvoir les avantages de la coopération sous différentes formes et de renforcer les relations entre les États présents dans les affaires antarctiques. La réalisation d'une entente souple dans le cadre de l'AGI, centrée autour des intérêts communs aux parties, comprenant un engagement d’honneur, permettant de mettre de côté les points de discorde, ont aussi été des points centraux dans la réussite et la poursuite de la coopération au-delà de l’AGI. Cette approche graduelle allant du droit souple vers le droit contraignant est sans aucun doute l’élément le plus important ayant facilité le rapprochement des différentes parties et éventuellement la création du Traité sur l’Antarctique.
Resumo:
A pH indicator film based on cassava starch plasticized with sucrose and inverted sugar and incorporated with grape and spinach extracts as pH indicator sources (anthocyanin and chlorophyll) has been developed, and its packaging properties have been assessed. A second-order central composite design (2(2)) with three central points and four star points was used to evaluate the mechanical properties (tensile strength, tensile strength at break, and elongation at break percentage), moisture barrier, and microstructure of the films, and its potential as a pH indicator packaging. The films were prepared by the casting technique and conditioned under controlled conditions (75% relative humidity and 23 degrees C), at least 4 days before the analyses. The materials were exposed to different pH solutions (0, 2, 7, 10, and 14) and their color parameters (L*, a*, b*, and haze) were measured by transmittance. Grape and spinach extracts have affected the material characterization. Film properties (mechanical properties and moisture barrier) were strongly influenced by extract concentration presenting lower results than for the control. Films containing a higher concentration of grape extract presented a greater color change at different pH`s suggesting that anthocyanins are more effective as pH indicators than chlorophyll or the mixture of both extracts. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: 1069-1079,2011
Resumo:
Este trabalho considera que o mundo está vivendo uma mudança de paradigma. Neste sentido, procura caminhos de expansão da consciência para esta mudança através da problemática ecológica, da historicidade da ciência e de seus fundamentos na física mecanicista. planetária que a ecologia sugere, a diferentes culturas e tradições de Percebe que a crise física atual e as sabedoria podem contribuir para a construção de uma nova forma de viver. Para tanto, desenvolve o conceito de "expansão da consciência", porque acredita que esta abordagem, resultante da práxis transdisciplinar da autora, pode levar a uma maior percepção da Totalidade da vida e também da sua rica Diversidade, pontos centrais para o novo paradigma. Desta maneira, este trabalho é parte de um movimento de mudança dos conceitos e atitudes presentes no paradigma moderno, a fim de que a Educação comece a vivenciar outras formas de conhecimento do real, diferentes dos rígidos limites científicos.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)