Estimates of genetic trend for carcass traits in a commercial broiler line

Data from the slaughter of 24,001 chickens that were part of a selection program for the production of commercial broilers were used to estimate genetic trend for absolute carcass (CW), breast meat (BRW), and leg (LW) weights, and relative carcass (CY), breast meat (BRY), and leg (LY) weights. The components of (co) variance and breeding values of individuals were obtained by the restricted maximum likelihood method applied to animal models. The relationship matrix was composed of 132,442 birds. The models included as random effects, maternal additive genetic and permanent environmental for CW, BRW, LW, CY, and BRY, and only maternal permanent environmental for LY, besides the direct additive genetic and residual effects, and as fixed effects, hatch week, parents' mating group and sex. The estimates of genetic trend were obtained by average regression of breeding value on generation, and the average genetic trend was estimated by regression coefficients. The genetic trends for CW (+ 6.0336 g/generation), BRW (+ 3.6723 g/generation), LW (+ 1.5846 g/generation), CY (+ 0.1195%/generation), and BRY (+ 0.1388%/generation) were positive, and they were in accordance with the objectives of the selection program for these traits. The genetic trend for LY(-0.0019%/generation) was negative, possibly due to the strong emphasis on selection for BRY and the negative correlations between these two traits.

Comparison of different models to estimate genetic parameters for carcass traits in a commercial broiler line

The effect of genetic and non-genetic factors for carcass, breast meat and leg weights, and yields of a commercial broiler line were investigated using the restricted maximum likelihood method, considering four different animal models, including or excluding maternal genetic effect with covariance between direct and maternal genetic effects, and maternal permanent environmental effect. The likelihood ratio test was used to determine the most adequate model for each trait. For carcass, breast, and leg weight, and for carcass and breast yield, maternal genetic and permanent environmental effects as well as the covariance between direct and maternal genetic effects were significant. The estimates of direct and maternal heritability were 0.17 and 0.04 for carcass weight, 0.26 and 0.06 for breast weight, 0.22 and 0.02 for leg weight, 0.32 and 0.02 for carcass yield, and 0.52 and 0.04 for breast yield, respectively. For leg yield, maternal permanent environmental effect was important, in addition to direct genetic effects. For that trait, direct heritability and maternal permanent environmental variance as a proportion of the phenotypic variance were 0.43 and 0.02, respectively. The results indicate that ignoring maternal effects in the models, even though they were of small magnitude (0.02 to 0.06), tended to overestimate direct genetic variance and heritability for all traits.

Genetic associations between carcass traits measured by real-time ultrasound and scrotal circumference and growth traits in Nelore cattle

The aim of the present study was to evaluate the genetic correlations among real-time ultrasound carcass, BW, and scrotal circumference (SC) traits in Nelore cattle. Carcass traits, measured by real-time ultrasound of the live animal, were recorded from 2002 to 2004 on 10 farms across 6 Brazilian states on 2,590 males and females ranging in age from 450 to 599 d. Ultrasound records of LM area (LMA) and backfat thickness (BF) were obtained from cross-sectional images between the 12th and 13th ribs, and rump fat thickness (RF) was measured between the hook and pin bones over the junction between gluteus medius and biceps femoris muscles. Also, BW (n = 22,778) and SC ( n = 5,695) were recorded on animals born between 1998 and 2003. The BW traits were 120, 210, 365, 450, and 550-d standardized BW (W120, W210, W365, W450, and W550), plus BW (WS) and hip height (HH) on the ultrasound scanning date. The SC traits were 365-, 450-, and 550-d standardized SC (SC365, SC450, and SC550). For the BW and SC traits, the database used was from the Nelore Breeding Program-Nelore Brazil. The genetic parameters were estimated with multivariate animal models and REML. Estimated genetic correlations between LMA and other traits were 0.06 (BF), -0.04 ( RF), 0.05 (HH), 0.58 (WS), 0.53 (W120), 0.62 (W210), 0.67 (W365), 0.64 ( W450 and W550), 0.28 (SC365), 0.24 (SC450), and 0.00 ( SC550). Estimated genetic correlations between BF and with other traits were 0.74 ( RF), -0.32 (HH), 0.19 (WS), -0.03 (W120), -0.10 (W210), 0.04 (W365), 0.01 (W450), 0.06 ( W550), 0.17 (SC365 and SC450), and -0.19 (SC550). Estimated genetic correlations between RF and other traits were -0.41 (HH), -0.09 (WS), -0.13 ( W120), -0.09 ( W210), -0.01 ( W365), 0.02 (W450), 0.03 (W550), 0.05 ( SC365), 0.11 ( SC450), and -0.18 (SC550). These estimates indicate that selection for carcass traits measured by real-time ultrasound should not cause antagonism in the genetic improvement of SC and BW traits. Also, selection to increase HH might decrease subcutaneous fat as correlated response. Therefore, to obtain animals suited to specific tropical production systems, carcass, BW, and SC traits should be considered in selection programs.

Performance, carcass traits and costs of Suffolk lambs finishing systems with early weaning and controlled suckling

The performance, carcass traits and finishing costs of Suffolk lambs were evaluated in three systems: (1) lambs weaned with 22 kg of body weight (BW) and supplemented with concentrate on pasture until slaughter; (2) lambs weaned with 22 kg BW and fed in feedlot until slaughter; (3) lambs maintained in controlled nursing after 22 kg BW and creep fed in feedlot until slaughter. Average daily gain (ADG) was 224 g/d for lambs weaned and supplemented with concentrate on pasture, 386 g/d for lambs weaned in feedlot and 481 g/d for lambs under controlled nursing. Empty body weight and visceral fat deposition were highest in lambs from feedlot systems. Carcass weights and carcass yields were highest for lambs in controlled nursing. Finishing total costs were highest in controlled nursing and lowest in the system with weaning in feedlot. High concentrate diet associated with controlled nursing in feedlot allowed lambs to reach the growth potential and carcasses with higher weights, higher yields and higher fat content. After weaning, lambs in feedlot fed with high concentrate diet had higher weight gain than lambs supplemented with concentrate on pasture. Carcasses produced under these two systems presented the same characteristics. The system with weaning in feedlot showed the lowest cost per kg carcass.

Polymorphisms in candidate genes and their association with carcass traits and meat quality in Nellore cattle

The objective of this work was to estimate the allele polymorphism frequencies of genes in Nellore cattle and associate them with meat quality and carcass traits. Six hundred males were genotyped for the following polymorphisms: DGAT1 (VNTR with 18 nucleotides at the promoter region); ANK1, a new polymorphism, identified and mapped here at the gene regulatory region NW_001494427.3; TCAP (AY428575.1:g.346G>A); and MYOG (NW_001501985:g.511G>C). In the association study, phenotype data of hot carcass weight, ribeye area, backfat thickness, percentage of intramuscular fat, shear force, myofibrillar fragmentation index, meat color (L*, a*, b*), and cooking losses were used. Allele B from the ANK1 gene was associated with greater redness (a*). Alleles 5R, 6R, and 7R from the DGAT1 VNTR gene were associated with increased intramuscular fat, reduced cooking losses and increased ribeye area, respectively. The single nucleotide polymorphism (SNP) of the TCAP gene was not polymorphic, and MYOG alleles were not associated with any of the evaluated characteristics. These results indicate that ANK1 and DGAT1 genes can be used in the selection of Nellore cattle for carcass and meat quality.

Assessment of DGAT1 and LEP gene polymorphisms in three Nelore (Bos indicus) lines selected for growth and their relationship with growth and carcass traits

The aim of this study was to analyze LEP and DGAT1 gene polymorphisms in 3 Nelore lines selected for growth and to evaluate their effects on growth and carcass traits. Traits analyzed were birth, weaning, and yearling weight, rump height, LM area, backfat thickness, and rump fat thickness obtained by ultrasound. Two SNP in the LEP gene [LEP 1620(A/G) and LEP 305(T/C)] and the K232A mutation in the DGAT1 gene were analyzed. The sample consisted of 357 Nelore heifers from 2 lines selected for yearling weight and a control line, established in 1980, at the Estacao Experimental de Zootecnia de Sertaozinho (Sertaozinho, Brazil). Three genotypes were obtained for each marker. Differences in allele frequencies among the 3 lines were only observed for the DGAT1 K232A polymorphism, with the frequency of the A allele being greater in the control line than in the selected lines. The DGAT1 K232A mutation was associated only with rump height, whereas LEP 1620(A/G) was associated with weaning weight and LEP 305(T/C) with birth weight and backfat thickness. However, more studies, with larger data sets, are necessary before these makers can be used for marker-assisted selection.

Genetic analysis on growth and carcass traits in Nelore cattle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetic associations between carcass traits measured by real-time ultrasound and scrotal circumference and growth traits in Nelore cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Assessment of DGAT1 and LEP gene polymorphisms in three Nelore (Bos indicus) lines selected for growth and their relationship with growth and carcass traits

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MUC1 gene polymorphism in three Nelore lines selected for growth and its association with growth and carcass traits

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of GHR gene polymorphisms on growth and carcass traits in Zebu and crossbred beef cattle

The growth hormone receptor (GHR) is the cell surface receptor for growth hormone (GH) and is required for GH to carry out its effects on target tissues. The objectives of the present study were to estimate the allele and genotype frequencies of the GHR/Alu I gene polymorphism located in the regulatory region in beef cattle belonging to different genetic groups and to determine associations between this polymorphism and growth and carcass traits. Genotyping was performed on 384 animals, including 79 Nellore (Zebu), 30 Canchim (5/8 Charolais+3/8 Zebu), 30 Simmental X Nellore crossbred and 245 Angus x Nellore crossbred cattle. Alleles Alu I(+), Alu I(-) and Alu I(N)-null allele-were evidenced for the GHR/Alu I polymorphism and the frequency of the Alu I(N) allele was significantly higher than the frequency of the Alu I(+) and Alu I(-) alleles in all genetic groups. Genotype Alu I(N/N) of the GHRIAlu I predominated in Nellore animals, while the Alu I(N/+) and Alu I(N/-) predominated in the other genetic groups. In the association studies, traits of interest were analyzed using the General Linear Model (GLM) procedure of the SAS program and least squares means of the genotypes were compared by the Tukey test. Significant associations (P < 0.05) were observed between the Alu I(N/N) genotype of the GHRIAlu I polymorphism and lower weight gain and body weight at slaughter, although a confounding between genotypes and genetic groups may have occurred. (c) 2005 Elsevier B.V. All rights reserved.

Effects of polymorphic microsatellites in the regulatory region of IGF1 and GHR on growth and carcass traits in beef cattle

Growth hormone (GH), insulin-like growth factors 1 and 2 (IGF1 and IGF2) and their associated binding proteins and transmembrane receptors (GHR, IGF1R and IGF2R) play an important role in the physiology of mammalian growth. The objectives of the present study were to estimate the allele and genotype frequencies of microsatellite markers located in the 5'-regulatory region of the IGF1 and GHR genes in beef cattle belonging to different genetic groups and to determine effects of these markers on growth and carcass traits in these animals under an intensive production system. For this purpose, genotyping was performed on 384 bulls including 79 Nellore, 30 Canchim (5/8 Charolais + 3/8 Zebu) and 275 crossbred animals originating from crosses of Simmental (1/2 Simmental, n = 30) and Angus (1/2 Angus, n = 245) sires with Nellore females. The effects of substituting L allele for S allele of GHR microsatellite across Nellore, Canchim and 1/2 Angus were significant for weight gain and body weight (P < 0.05). The IGF1 microsatellite allele substitutions of 229 for 225 within Nellore group and of 225 for 229 within 1/2 Angus were not significant for any of the traits.

Association between IGF-I, IGF-IR and GHRH gene polymorphisms and growth and carcass traits in beef cattle

Molecular biology techniques are of help in genetic improvement since they permit the identification, mapping and analysis of polymorphisms of genes encoding proteins that act on metabolic pathways involved in economically interesting traits. The somatotrophic axis, which essentially consists of growth hormone releasing hormone (GHRH), growth hormone (GH), insulin-like growth factors I and II (IGF-I and IGF-II), and their associated binding proteins and receptors (GHRHR, GHR, IGF-IR and IGF-IIR), plays a key role in the metabolism and physiology of mammalian growth. The objectives of the present study were to estimate the allele and genotype frequencies of the IGF-I/SnaBI, IGF-IR/TaqI and GHRH/HaeIII gene polymorphisms in different genetic groups of beef cattle and to determine associations between these polymorphisms and growth and carcass traits. For this purpose, genotyping was performed on 79 Nellore animals, 30 Canchim (5/8 Charolais+3/8 Zebu) animals and 275 crossbred cattle originating from the crosses of Simmental (n=30) and Angus (n=245) sires with Nellore females. In the association studies, traits of interest were analyzed using the GLM procedure of SAS and least square means of the genotypes were compared by the Tukey test. Associations of IGF-I/SnaBI genotypes with body weight and subcutaneous backfat were significant (p < 0.05), and nearly significant for longissimus dorsi area (p=0.06), with the 1313 genotype being favorable compared to the AB genotype. No significant associations were observed between this polymorphism and weight gain or carcass yield (P > 0.05). The IGF-IR/TaqI and GHRH/HaeIII polymorphisms showed no association with production traits. (c) 2004 Elsevier B.V All rights reserved.

Growth and carcass traits associated with GH1/Alu I and POU1F1/Hinf I gene polymorphisms in Zebu and crossbred beef cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Feedlot performance, feed efficiency and carcass traits in Nellore cattle selected for postweaning weight

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)