Erään hienopaperikoneen paksuusprofiilin hallinta

Työn kirjallisuusosassa perehdytään paperikoneen online-mittarien toimintaan, poikkisuuntaisten profiilien säätämiseen ja kalanterointiin. Työn tavoitteena oli löytää syyt erään hienopaperikoneen heikkoon paksuusprofiiliin ja siitä aiheutuvaan suureen rullahylkymäärään. Syitä heikkoon paksuusprofiiliin on haettu kalanterin, päällystysasemien ja laatusäätöjärjestelmän toiminnoista. Työssä on tutkittu myös karheusprofiilin vaikutusta paksuusmittaukseen. Työssä löydettiin selvä yhteys paperin karheusprofiilin ja paperikoneen paksuusmittarin mittaaman paksuusprofiilin välille. Radan reuna-alueiden karheus suurentaa online-paksuusmittarin mittaustulosta. Karheusprofiili ei kuitenkaan vaikuta laboratoriomittareilla mitattuun paksuusprofiiliin. Paperikoneen onlinepaksuusmittarin mittausvirhe on kompensoitava, jotta paperin todellinen paksuusprofiili saadaan suoraksi. Työssä tehtyjen tutkimusten perusteella muodostettiin ajomalli, jolla ajettiin koeajojakso. Ajomallin päällimmäinen tarkoitus oli kompensoida paperikoneen online- paksuusmittarin mittausvirhe. Koeajo onnistui hyvin. Koeajojakson profiilivioista johtuva rullahylyn määräoli merkittävästi pienempi kuin referenssijakson profiilivioista johtuva rullahylyn määrä.

Improving Cross Direction Basis Weight Profile in a Fourdrinier Paper Machine

The purpose of this study was to improve PM7’s basis weight CD profile in Stora Enso’s Berghuizer mill and to search mechanical defects which affect to the formation of the basis weight CD profile. In the theoretical part PM7’s structure was presented and the formation of the basis weight and caliper CD profiles was examined as well as disturbances which are affecting to the formation. The function of the control system was scrutinised for the side of CD profiles as well as the formation of the measured CD profiles. Tuning of the control system was examined through the response model and filtering. Specification of the response model and filtering was explained and how to determine 2sigma statistical number. In the end of the theoretical part ATPA hardware and a new profile browser were introduced. In the experimental part focus was in the beginning to search and remove mechanical defects which are affecting to CD profiles. The next step was to verify the reliability of the online measurements, to study the stability of the basis weight CD profile and to find out so called fingerprint, a basis weight CD profile which is unique for each paper machine. New response model and filtering value for basis weight CD profile was determined by bump tests. After a follow up period the affect of the new response model and filtering was analysed.

Simulating the performance of paper machine control

The topic of this thesis is the simulation of a combination of several control and data assimilation methods, meant to be used for controlling the quality of paper in a paper machine. Paper making is a very complex process and the information obtained from the web is sparse. A paper web scanner can only measure a zig zag path on the web. An assimilation method is needed to process estimates for Machine Direction (MD) and Cross Direction (CD) profiles of the web. Quality control is based on these measurements. There is an increasing need for intelligent methods to assist in data assimilation. The target of this thesis is to study how such intelligent assimilation methods are affecting paper web quality. This work is based on a paper web simulator, which has been developed in the TEKES funded MASI NoTes project. The simulator is a valuable tool in comparing different assimilation methods. The thesis contains the comparison of four different assimilation methods. These data assimilation methods are a first order Bayesian model estimator, an ARMA model based on a higher order Bayesian estimator, a Fourier transform based Kalman filter estimator and a simple block estimator. The last one can be considered to be close to current operational methods. From these methods Bayesian, ARMA and Kalman all seem to have advantages over the commercial one. The Kalman and ARMA estimators seems to be best in overall performance.

Method for cadmium and lead longitudinal profiles determination in hair by solid sampling graphite furnace atomic absorption spectrometry

This paper describes methods for the direct determination of Cd and Pb in hair segments (c.a. 5 mm similar to 80 mu g) by solid sampling graphite furnace atomic absorption spectrometry, becoming possible longitudinal profiles in a single strand of hair. To distinguish endogenous and exogenous content. strands of hair were washed by using two different procedures: IAEA protocol (acetone + water + acetone) and the combination of IAEA protocol with HCl washing (acetone + water + acetone + 0.1 mol l(-1) HCl). The concentration of Cd and Pb increased from the root Until the tip of hair washed according to IAEA protocol. However, when the strand of hair was washed using the combination of IAEA protocol and 0.1 mol l(-1) HCl, Cd concentrations decreased in all segments, and Pb concentrations decreased drastically near to the root (5 to 12 mm) and was systematically higher ill the end. The proposed method showed to be useful to assess the temporal variation to Cd and Pb exposure and call be Used for toxicological and environmental investigations. The limits of detection were 2.8 ng g(-1) for Cd and 40 ng g(-1) for Pb. The characteristic masses based oil integrated absorbance were 2.4 pg for Cd and 22 pg for Pb.

ICGD 2003: International Cocoa Germplasm Database Version 5.2. CD-ROM

The current version of this database on CD-ROM contains information on 14 127 cocoa (Theobroma cacao) clones and their 14 112 synonyms, the origin and history of the clones and the clone names, and accession lists for 48 of the major cocoa gene banks including quarantine stations. Also included are morphological data for leaves, fruits and seeds, disease reactions, quality and agronomic characters, and reference information on common abbreviations and acronyms, cocoa gene bank addresses and a full bibliography (with hyperlinked reference to data). New additions are 748 photographs and drawings of 428 individual clones in 11 different locations. Also included are 376 profiles for 15 simple sequence repeat primer pairs on 331 clones held in the University of Reading Intermediate Cocoa Quarantine Facility. Minimum system requirements are Windows 95 or later, a Pentium 166 with 32 MB RAM, CD-ROM drive and a minimum 20 MB hard disk space. A user guide is included in the package.

Anthropogenic influences on Cd, Cr,Cu, Ni, Pb and Zn concentrations in soils and sediments in a watershed with sugar cane crops at São Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do perfil de expressão gênica de células CD34+ e células CD CD133+ isoladas de medula óssea e de sangue de cordão umbilical

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Decaffeinated green tea extract rich in epigallocatechin-3-gallate improves insulin resistance and metabolic profiles in normolipidic diet--but not high-fat diet-fed mice

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Arsenic and trace metal contents in sediment profiles from the Admiralty Bay, King George Island, Antarctica

Admiralty Bay (Antarctica) hosts three scientific stations (Ferraz, Arctowski and Macchu Picchu), which require the use of fossil fuel as an energy source. Fossil fuels are also considered the main source of pollution in the area, representing important inputs of major pollutants (organic compounds) and trace metals and metalloids of environmental interest. Accordingly, this work presents the results of As, Cd, Cr, Cu, Ni, Pb and Zn in sediment profiles from Admiralty Bay. The sediment results from Ferraz station were slightly higher than the other sampling sites. The highest contents were observed for Cu and Zn (from 44 to 89 mg kg(-1)). Otherwise, by using enrichment factors and geochronology analysis, the most relevant enrichment was observed for As in the samples collected close to the Ferraz station, indicating that increasing As content may be associated with the activities associated with this site. Published by Elsevier Ltd.

BENZENE MYELOCLASTOGENICITY AND METABOLISM IN CD-1 MICE: A CORRELATION

Benzene was studied in its target organ of effect, the bone marrow, with the micronucleus test and metaphase chromosomal analysis. Groups of 5 or 10, male and female CD-1 mice were treated with one or two p.o. or i.p. doses of benzene (440 mg/kg) or toluene (430, 860 or 1720 mg/kg) or both, and sacrificed 30 or 54h after the first dose. Benzene-treated animals were pretreated with phenobarbital (PB), 3-methylcholanthrene (3MC), (beta)-naphthoflavone ((beta)NF), SKF-525A, or Aroclor 1254. Toluene showed no clastogenic activity and reduced the clastogenic effect of co-administered benzene. None of the pretreatments protected against benzene clastogenicity. 3MC and (beta)NF greatly promoted benzene myeloclastogenicity. Dose response curves for benzene myeloclastogenicity were much steeper with 3MC induction than without. Micronuclei (MN) were 4-6 times higher by p.o. than i.p. benzene administration. This was not due to bacterial flora since no difference was found between germ-free and conventional males gavaged with benzene. A sensitive high-pressure liquid chromatographic method was developed and used to explore the relation between metabolic profiles of benzene in urine and MN after various pretreatments. Phenol (PH), trans-trans-muconic acid (MA) and hydroquinone (HQ) in the 48h male mouse urine accounted, respectively, for 12.8-22.8, 1.8-4.7 and 1.5-3.7% of the single oral dose of benzene (880, 440 and 220 mg/kg). Catechol (CT) was seen in trace amounts. MA was identified by ultraviolet and infrared spectroscopy and elemental analysis. Urinary metabolites--especially MA, HQ, and phenol glucuronide--correlated well with MN and were dependent on both the dose and the metabolism of benzene. Benzene metabolism was most inducible by cytochrome P-448 enzyme inducers, by p.o. > i.p., in males > females, and inhibited by toluene. Ph, CT or HQ administered p.o., 250, 150 and 250 mg/kg, respectively, or at 150 mg/kg x 2 after 3MC pretreatment, failed to reproduce the potent myeloclastogenicity of benzene. In fact, only HQ was mildly clastogenic. ^

Ground truthing the Cd/Ca-carbon isotope relationship in foraminifera of the Greenland-Iceland-Norwegian Seas

In order to examine whether the paleoceanographic nutrient proxies, d13C and cadmium/calcium in foraminiferal calcite, are well coupled to nutrients in the region of North Atlantic Deep Water formation, we present da ta from two transects of the Greenland-Iceland-Norwegian Seas. Along Transect A (74.3°N, 18.3°E to 75.0°N, 12.5°W, 15 stations), we measured phosphate and Cd concentrations of modern surface sea water. Along Transect B (64.5°N, 0.7°W to 70.4°N, 18.2°W, 14 stations) we measured Cd/Ca ratios and d13C of the planktonic foraminifera Neogloboquadrina pachyderma sinistral in core top sediments. Our results indicate that Cd and phosphate both vary with surface water mass and are well correlated along Transect A. Our planktonic foraminiferal d13C data indicate similar nutrient variation with water mass along Transect B. Our Cd/Ca data hint at the same type of nutrient variability, but interpretations are hampered by low values close to the detection limit of this technique and therefore relatively large error bars. We also measured Cd and phosphate concentrations in water depth profiles at three sites along Transect A and the d13C of the benthic foraminifera Cibicidoides wuellerstorfi along Transect B. Modern sea water depth profiles along Transect A have nutrient depletions at the surface and then constant values at depths greater than 100 meters. The d13C of planktonic and benthic foraminifera from Transect B plotted versus depth also reflect surface nutrient depletion and deep nutrient enrichment as seen at Transect A, with a small difference between intermediate and deep waters. Overall we see no evidence for decoupling of Cd/Ca ratio and d13C in foraminiferal calcite from water column nutrient concentrations along these transects in a region of North Atlantic Deep Water formation.