Conceptualization of a Behavior Modification Tool for University Systems and Doctoral Students

This paper describes a university based system relevant to doctoral students who have problems with themselves, their peers and research supervisors. Doctoral students have various challenges to solve and these challenges contribute to delays in their thesis submission. This tool aims at helping them think through their problem in a pre-counseling stage. The tool uses narratives and hypothetical stories to walk a doctoral student through options of responses he or she can make given the situation in the narrative. Narratives were developed after a preliminary survey (n=57) of doctoral students. The survey indicated that problems they experienced were: busy supervisors, negative competition from peers and laziness with self. The narrative scenarios in the tool prompt self-reflection and provide for options to chose from leading to the next scenario that will ensue. The different stages of the stimulus-response cycles are designed based on Thomas-Kilmann conflict resolution techniques (collaboration and avoidance). Each stimulus-response cycle has a score attached that reflects the student's ability to judge a collaborative approach. At the end of all the stages a scorecard is generated indicating either a progressive or regressive outcome of thesis submission.

A school-based cognitive behavior modification intervention strategy for learned helpless mentally retarded students

This study assessed the usefulness of a cognitive behavior modification (CBM) intervention package with mentally retarded students in overcoming learned helplessness and improving learning strategies. It also examined the feasibility of instructing teachers in the use of such a training program for a classroom setting. A modified single subject design across individuals was employed using two groups of three subjects. Three students from each of two segregated schools for the mentally retarded were selected using a teacher questionnaire and pupil checklist of the most learned helpless students enrolled there. Three additional learned helplessness assessments were conducted on each subject before and after the intervention in order to evaluate the usefulness of the program in alleviating learned helplessness. A classroom environment was created with the three students from each school engaged in three twenty minute work sessions a week with the experimenter and a tutor experimenter (TE) as instructors. Baseline measurements were established on seven targeted behaviors for each subject: task-relevant speech, task-irrelevant speech, speech denoting a positive evaluation of performance, speech denoting a negative evaluation of performance, proportion of time on task, non-verbal positive evaluation of performance and non-verbal negative evaluation of performance. The intervention package combined a variety of CBM techniques such as Meichenbaum's (1977) Stop, Look and Listen approach, role rehearsal and feedback. During the intervention each subject met with his TE twice a week for an individual half-hour session and one joint twenty minute session with all three students, the experimentor and one TE. Five weeks after the end of this experiment one follow up probe was conducted. All baseline, post-intervention and probe sessions were videotaped. The seven targeted behaviors were coded and comparisons of baseline, post intervention, and probe testing were presented in graph form. Results showed a reduction in learned helplessness in all subjects. Improvement was noted in each of the seven targeted behaviors for each of the six subjects. This study indicated that mentally retarded children can be taught to reduce learned helplessness with the aid of a CBM intervention package. It also showed that CBM is a viable approach in helping mentally retarded students acquire more effective learning strategies. Because the TEs (Tutor experimenters) had no trouble learning and implementing this program, it was considered feasible for teachers to use similar methods in the classroom.

Recent development of tip modification techniques in chemical force microscope

A review is given on the recent development of scanning probe microscope (SPM) tip modification techniques for chemical force microscope, including the preparation and application of SPM tip modified by self-assembled monolayer, atomic force microscope (AFM) tip modified by biological molecule, scanning tunneling microscope tip modified by electrochemical method, AFM tip modified by carbon nanotube.

Teaching students with behavior disorders : techniques and activities for classroom instruction.

Manual que describe lo que los maestros pueden hacer para promover el aprendizaje de jóvenes con problemas. Comienza con una visión general sobre estos estudiantes. Continúa con la planificación inicial y la organización del ambiente de la clase, de acuerdo con las diversas fases del programa académico, seguido por el diagnóstico de las fortalezas y debilidades de los estudiantes. Se proporcionan ejemplos de aula para ilustrar cómo se pueden aplicar las técnicas sugeridas tanto en especial como en las aulas ordinarias para captar la atención del alumno y estimular el pensamiento creativo.

Behavior change techniques used to promote walking and cycling : a systematic review

Objective: Evidence on the effectiveness of walking and cycling interventions is mixed. This may be partly attributable to differences in intervention content, such as the cognitive and behavioral techniques (BCTs) used. Adopting a taxonomy of BCTs, this systematic review addressed two questions: (a) What are the behavior change techniques used in walking and cycling interventions targeted at adults? (b) What characterizes interventions that appear to be associated with changes in walking and cycling in adults?

Method: Previous systematic reviews and updated database searches were used to identify controlled studies of individual-level walking and cycling interventions involving adults. Characteristics of intervention design, context, and methods were extracted in addition to outcomes. Intervention content was independently coded according to a 26-item taxonomy of BCTs.

Results: Studies of 46 interventions met the inclusion criteria. Twenty-one reported a statistically significant effect on walking and cycling outcomes. Analysis revealed substantial heterogeneity in the vocabulary used to describe intervention content and the number of BCTs coded. “Prompt self-monitoring of behavior” and “prompt intention formation” were the most frequently coded BCTs.

Conclusion: Future walking and cycling intervention studies should ensure that all aspects of the intervention are reported in detail. The findings lend support to the inclusion of self-monitoring and intention formation techniques in future walking and cycling intervention design, although further exploration of these and other BCTs is required. Further investigation of the interaction between BCTs and study design characteristics would also be desirable.

The behavior modification school follow-up study. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

mHealth technologies to influence physical activity and sedentary behaviors: behavior change techniques, systematic review and meta-analysis of randomized controlled trials

BACKGROUND: mHealth programs offer potential for practical and cost-effective delivery of interventions capable of reaching many individuals.

PURPOSE: To (1) compare the effectiveness of mHealth interventions to promote physical activity (PA) and reduce sedentary behavior (SB) in free-living young people and adults with a comparator exposed to usual care/minimal intervention; (2) determine whether, and to what extent, such interventions affect PA and SB levels and (3) use the taxonomy of behavior change techniques (BCTs) to describe intervention characteristics.

METHODS: A systematic review and meta-analysis following PRISMA guidelines was undertaken to identify randomized controlled trials (RCTs) comparing mHealth interventions with usual or minimal care among individuals free from conditions that could limit PA. Total PA, moderate-to-vigorous intensity physical activity (MVPA), walking and SB outcomes were extracted. Intervention content was independently coded following the 93-item taxonomy of BCTs.

RESULTS: Twenty-one RCTs (1701 participants-700 with objectively measured PA) met eligibility criteria. SB decreased more following mHealth interventions than after usual care (standardised mean difference (SMD) -0.26, 95 % confidence interval (CI) -0.53 to -0.00). Summary effects across studies were small to moderate and non-significant for total PA (SMD 0.14, 95 % CI -0.12 to 0.41); MVPA (SMD 0.37, 95 % CI -0.03 to 0.77); and walking (SMD 0.14, 95 % CI -0.01 to 0.29). BCTs were employed more frequently in intervention (mean = 6.9, range 2 to 12) than in comparator conditions (mean = 3.1, range 0 to 10). Of all BCTs, only 31 were employed in intervention conditions.

CONCLUSIONS: Current mHealth interventions have small effects on PA/SB. Technological advancements will enable more comprehensive, interactive and responsive intervention delivery. Future mHealth PA studies should ensure that all the active ingredients of the intervention are reported in sufficient detail.

Behavioral intervention techniques in drug abuse treatment /

Mode of access: Internet.

Plasma assisted surface modification of organic biopolymers to prevent bacterial attachment

Despite many synthetic biomaterials having physical properties that are comparable or even superior to those of natural body tissues, they frequently fail due to the adverse physiological reactions they cause within the human body, such as infection and inflammation. The surface modification of biomaterials is an economical and effective method by which biocompatibility and biofunctionality can be achieved while preserving the favorable bulk characteristics of the biomaterial, such as strength and inertness. Amongst the numerous surface modification techniques available, plasma surface modification affords device manufacturers a flexible and environmentally friendly process that enables tailoring of the surface morphology, structure, composition, and properties of the material to a specific need. There are a vast range of possible applications of plasma modification in biomaterial applications, however, the focus of this review paper is on processes that can be used to develop surface morphologies and chemical structures for the prevention of adhesion and proliferation of pathogenic bacteria on the surfaces of in-dwelling medical devices. As such, the fundamental principles of bacterial cell attachment and biofilm formation are also discussed. Functional organic plasma polymerised coatings are also discussed for their potential as biosensitive interfaces, connecting inorganic/metallic electronic devices with their physiological environments.

MODIFICATION OF PP/HDPE BLENDS BY PP-PE SEQUENTIAL POLYMERIZATION PRODUCT

The morphology and mechanical properties of polypropylene/high-density polyethylene (PP/HDPE) blends in a wide range of compositions modified by a sequential Ziegler-Natta polymerization product (PP-PE) have been investigated. PP-PE contains multiple components such as PP, ethylene-propylene copolymer (EPC), and high molecular weight polyethylene (HMWPE). The effects of PP-PE on the mechanical properties and morphology of the PP/HDPE blends are the aggregative results of all its individual components. Addition of PP-PE to the blends not only improved the tensile strength of the blends, but the elongation at break increased linearly while the moduli were nearly unchanged. Morphological studies show that the adhesion between the two phases in all the blends of different compositions is enhanced and the dispersed domain sizes of the blends are reduced monotonously with the increment of the content of PP-PE. PP-PE has been demonstrated to be a more effective compatibilizer than EPC. Based on these results, it can be concluded that the tensile strength of the blends depends most on the adhesion between the two phases and the elongation at break depends most on the domain size of the dispersed component. (C) 1995 John Wiley & Sons, Inc.

Can we harness computerised cognitive bias modification to treat anxiety in schizophrenia? A first step highlighting the role of mental imagery

A new wave of computerised therapy is under development which, rather than simulating talking therapies, uses bias modification techniques to target the core psychological process underlying anxiety. Such interventions are aimed at anxiety disorders, and are yet to be adapted for co-morbid anxiety in psychosis. The cognitive bias modification (CBM) paradigm delivers repeated exposure to stimuli in order to train individuals to resolve ambiguous information in a positive, rather than anxiety provoking, manner. The current study is the first to report data from a modified form of CBM which targets co-morbid anxiety within individuals diagnosed with schizophrenia. Our version of CBM involved exposure to one hundred vignettes presented over headphones. Participants were instructed to actively simulate the described scenarios via visual imagery. Twenty-one participants completed both a single session of CBM and a single control condition session in counter-balanced order. Within the whole sample, there was no significant improvement on interpretation bias of CBM or state anxiety, relative to the control condition. However, in line with previous research, those participants who engage in higher levels of visual imagery exhibited larger changes in interpretation bias. We discuss the implications for harnessing computerised CBM therapy developments for co-morbid anxiety in schizophrenia.

Comportamento tribologico di materiali per componenti di interesse industriale: Failure analysis e prove tribologiche in laboratorio

L’attività di ricerca della presente tesi di dottorato ha riguardato sistemi tribologici complessi di interesse industriale per i quali sono stati individuati, mediante failure analysis, i meccanismi di usura dominanti. Per ciascuno di essi sono state studiate soluzioni migliorative sulla base di prove tribologiche di laboratorio. Nella realizzazione di maglie per macchine movimentazione terra sono ampiamente utilizzati i tradizionali acciai da bonifica. La possibilità di utilizzare i nuovi microlegati a medio tenore di carbonio, consentirebbe una notevole semplificazione del ciclo produttivo e benefici in termini di costi. Una parte della tesi ha riguardato lo studio del comportamento tribologico di tali acciai. E’ stato anche affrontato lo studio tribologico di motori idraulici, con l’obiettivo di riuscire a migliorarne la resistenza ad usura e quindi la vita utile. Sono state eseguite prove a banco, per valutare i principali meccanismi di usura, e prove di laboratorio atte a riprodurre le reali condizioni di utilizzo, valutando tecniche di modificazione superficiale che fossero in grado di ridurre l’usura dei componenti. Sono state analizzate diverse tipologie di rivestimenti Thermal Spray in termini di modalità di deposizione (AFS-APS) e di leghe metalliche depositate (Ni,Mo,Cu/Al). Si sono infine caratterizzati contatti tribologici nel settore del packaging, dove l’utilizzo di acciai inox austenitici è in alcuni casi obbligatorio. L’acciaio inossidabile AISI 316L è ampiamente utilizzato in applicazioni in cui siano richieste elevate resistenze alla corrosione, tuttavia la bassa resistenza all’usura, ne limitano l’impiego in campo tribologico. In tale ambito, è stata analizzata una problematica tribologica relativa a macchine automatiche per il dosaggio di polveri farmaceutiche. Sono state studiate soluzioni alternative che hanno previsto sia la completa sostituzione dei materiali della coppia tribologica, sia l’individuazione di tecniche di modificazione superficiale innovative quali la cementazione a bassa temperatura anche seguita dalla deposizione di un rivestimento di carbonio amorfo idrogenato a-C:H

Elimination of local abnormal ventricular activities: a new end point for substrate modification in patients with scar-related ventricular tachycardia

Catheter ablation of ventricular tachycardia (VT) is effective and particularly useful in patients with frequent defibrillator interventions. Various substrate modification techniques have been described for unmappable or hemodynamically intolerable VT. Noninducibility is the most frequently used end point but is associated with significant limitations, so the optimal end point remains unclear. We hypothesized that elimination of local abnormal ventricular activities (LAVAs) during sinus rhythm or ventricular pacing would be a useful and effective end point for substrate-based VT ablation. As an adjunct to this strategy, we used a new high-density mapping catheter and frequently used epicardial mapping.