A sensitive vorticity gauge using rotated porphyroblasts, and its application to rocks adjacent to the Alpine Fault, New Zealand

Variable aspect ratio porphyroblasts deformed in non-coaxial flow. and internally containing rotated relicts of an external foliation, can be used to characterise plane strain flow regimes. The distribution obtained by plotting the orientation of the long axis of such grains, classified by aspect ratio, against the orientation of the internal foliation is potentially a sensitive gauge of both the bulk shear strain (as previously suggested) and kinematic vorticity number. We illustrate the method using rotated biotite porphyroblasts in the Alpine Schist: a sequence of mid-crustal rocks that have been ramped to the surface along the Alpine Fault. a major transpressional plate boundary. Results indicate that, at distances greater than or equal to similar to1 km from the fault, the rocks have undergone a combination of irrotational fattening and dextral-oblique, normal-sense shear, with a bulk shear strain of similar to0.6 and kinematic vorticity number of similar to0.2. The vorticity analysis is compatible with estimates of strongly oblate bulk strain of similar to 75% maximum shortening. Dextral-reverse transpressional flow characterises higher strain S-tectonite mylonite within similar to1 km of the Alpine Fault. These relationships provide insight into the kinematics of flow and distribution of strain in the hangingwall of the Alpine Fault and place constraints on numerical mechanical models for the exhumation of these mid-crustal rocks. (C) 2001 Elsevier Science Ltd. All rights reserved.

Ductile fabrics in the zone of active oblique convergence near the Alpine Fault, New Zealand: identifying the neotectonic overprint

The mid-crustal Alpine Schist in central Southern Alps, New Zealand has been exhumed during the past similar to3 m.y. on the hanging wall of the oblique-slip Alpine Fault. These rocks underwent ductile deformation during their passage through the similar to 150-km-wide Pacific-Australia plate boundary zone. Likely to be Cretaceous in age, peak metamorphism predates the largely Pliocene and younger oblique convergence that continues to uplift the Southern Alps today. Late Cenozoic ductile deformation constructively reinforced a pre-existing fabric that was well oriented to accommodate a dextral-transpressive overprint. Quartz microstructures below a recently exhumed brittle-ductile transition zone reflect a late Cenozoic increment of ductile strain that was distributed across deeper levels of the Pacific Plate. Deformation was transpressive, including a dextral-normal shear component that bends and rotates a delaminated panel of Pacific Plate crust onto the oblique footwall ramp of the Alpine Fault. Progressive ductile shear in mylonites at the base of the Pacific Plate overprints earlier fabrics in a dextral-reverse sense, a deformation that accompanies translation of the schists up the Alpine Fault. Ductile shear along that structure affects not only the 12-km-thick section of Alpine mylonites, but is distributed across several kilometres of overlying nonmylonitic rocks. (C) 2001 Elsevier Science Ltd. All rights reserved.

Mesozoic fold structure of the Otago and Alpine Schist Belt and its implications on the tectonic evolution of South Island, New Zealand

Erneute Untersuchungen der mesozoischen Faltenstruktur des Otago Schiefergürtels, Südinsel, Neuseeland, zeigen, dass diese aus zwei aufeinander folgenden, ähnlichen, asymmetrischen, offenen bis mäßig engen Großfaltengenerationen im km- Größenbereich besteht anstatt aus den vorher angenommenen Decken- oder Halbfalten. Hauptproblem der Großfaltenstruktur sind Zonen von durchgreifender Boudinage, die in der Nähe der Großfaltenscharniere entstanden sind. Vorherige Bearbeiter deuteten diese Zonen als 'starke Verformungszonen' oder Überschiebungszonen. Diese Arbeit zeigt, dass in diesen Zonen nur durch die asymmetrische Faltung die unteren liegenden Schenkel der Großfalten boudiniert und somit häufig die ansonsten typischen Faltenstrukturen des liegenden Schenkels einer symmetrischen Faltung überprägt wurden. Ein weiteres Problem dieser mesozoischen Großfaltenstruktur ist die Überprägung einer Faltengeneration auf eine frühere. Weil die Verkürzungsrichtung der überprägenden Faltengeneration nicht subparallel zur älteren Faltenachse ist, sondern einen Winkel von rund 30 Grad einschließt, ist ein Wechsel von orthogonalen zu koaxialen Interferenzmustern der Kleinfalten beobachtbar. Folglich ist die Orientierung der Scheitellinie einer überprägenden und überprägten Kleinfalte nicht unbedingt subparallel zur Orientierung der Faltenachse der Großfalte trotz zylindrischer Faltung. Im letzten Teil dieser Arbeit wird die Überprägung der mesozoischen Großfaltenstruktur durch das känozoisch entstandene, transpressionale Alpine Störungssystem, das einen zweiseitigen Falten- und Überschiebungsgürtel im Otago und im Nordwesten anschließenden Alpinen Schiefergürtel bildet, beschrieben.

Clay mineralogical and isotopic (K-Ar, delta O-18, delta D) constraints on the evolution of the North Anatolian Fault Zone, Turkey

This study presents the first attempt to constrain the evolution of the North Anatolian Fault Zone (NAFZ) by age dating and isotope tracing of clay minerals formed during near-surface faulting. Extensive illitic clay mineralisation occurred along the NAFZ related to hydrothermal alteration of the fault gouges and pseudotachylytes. Samples representing the pre-fault protoliths outside the fault zone do not contain authigenic illitic clay minerals indicating that hydrothermal processes were confined to the areas within the fault zone. K-Ar age data indicate that the hydrothermal system and the associated illite authigenesis initiated at similar to 57 Ma. This process is interpreted to reflect the onset of significant strike-slip or transtensional faulting immediately after the continental collision related to the closure of the Neotethys Ocean. Following the initiation of the fault movements in the latest Paleocene-Early Eocene, displacements along the NAFZ have continued, with probably intensified fault activities at similar to 26 Ma and later than similar to 8 Ma. Oxygen isotope compositions of the illitic clays from different locations along the NAFZ are similar, with narrow ranges in delta O-18 values indicating clay precipitation from fluids with similar oxygen isotope compositions and crystallisation temperatures. The delta O-18 and delta D values of the calculated fluid isotopic composition (delta O-18=5.9 parts per thousand to 11.2 parts per thousand, delta D=-59 parts per thousand to -73 parts per thousand) are consistent with metamorphic and magmatic origin of fluids mobilised during active tectonism. The interpretation of the fluid flow history of the NAFZ is in agreement with that reported previously for some well-known large-scale high-angle fault zones, which similarly developed along collisional-type orogenic belts and are commonly associated with significant mesothermal ore mineralisation. (c) 2005 Elsevier B.V. All rights reserved.

Kinematics of oblique collision and ramping inferred from microstructures and strain in middle crustal rocks, central Southern Alps, New Zealand

The hanging wall of the Alpine Fault near Franz Josef Glacier has been exhumed during the past similar to2-3 m.y. providing a sample of the ductilely deformed middle crust of a modem obliquely convergent orogen. Presently exposed rocks of the Pacific Plate are inferred to have undergone several phases of ductile deformation as they moved westward above a mid-crustal detachment. Initially they were transpressed across the outboard part of the orogen, resulting in oblate fabrics with a down-dip stretch. Later, they encountered the Alpine Fault, experiencing an oblique-slip backshearing on vertical planes. This escalator-like deformation tilted and thinned the incoming crust onto that crustal-scale oblique ramp. This style of hanging wall deformation may affect only the most rapidly uplifting, central part of the Southern Alps because of the low flexural rigidity of the crust in that region and its displacement over a relatively sharp ramp-angle at depth. A 3D transpressive flow affected mylonites locally near the fault, but their shear direction remained parallel to plate motion, ruling out ductile 'extrusion' as an important process in this orogen. Outside the mylonite zone, late Cenozoic shortening is inferred to be modest (30-40%), as measured from deformation of younger biotite grains. Oblique collision is dominated by translation on the Alpine Fault, and rocks migrate rapidly through the deforming zone, preventing the accumulation of large finite strains. Transpression may play a minor role in oblique collision. (C) 2001 Elsevier Science Ltd. All rights reserved.

High-resolution seismic images of potentially seismogenic structures beneath the northwest Canterbury Plains, New Zealand

The transpressional boundary between the Australian and Pacific plates in the central South Island of New Zealand comprises the Alpine Fault and a broad region of distributed strain concentrated in the Southern Alps but encompassing regions further to the east, including the northwest Canterbury Plains. Low to moderate levels of seismicity (e. g., 2 > M 5 events since 1974 and 2 > M 4.0 in 2009) and Holocene sediments offset or disrupted along rare exposed active fault segments are evidence for ongoing tectonism in the northwest plains, the surface topography of which is remarkably flat and even. Because the geology underlying the late Quaternary alluvial fan deposits that carpet most of the plains is not established, the detailed tectonic evolution of this region and the potential for larger earthquakes is only poorly understood. To address these issues, we have processed and interpreted high-resolution (2.5 m subsurface sampling interval) seismic data acquired along lines strategically located relative to extensive rock exposures to the north, west, and southwest and rare exposures to the east. Geological information provided by these rock exposures offer important constraints on the interpretation of the seismic data. The processed seismic reflection sections image a variably thick layer of generally undisturbed younger (i.e., < 24 ka) Quaternary alluvial sediments unconformably overlying an older (> 59 ka) Quaternary sedimentary sequence that shows evidence of moderate faulting and folding during and subsequent to deposition. These Quaternary units are in unconformable contact with Late Cretaceous-Tertiary interbedded sedimentary and volcanic rocks that are highly faulted, folded, and tilted. The lowest imaged unit is largely reflection-free Permian Triassic basement rocks. Quaternary-age deformation has affected all the rocks underlying the younger alluvial sediments, and there is evidence for ongoing deformation. Eight primary and numerous secondary faults as well as a major anticlinal fold are revealed on the seismic sections. Folded sedimentary and volcanic units are observed in the hanging walls and footwalls of most faults. Five of the primary faults represent plausible extensions of mapped faults, three of which are active. The major anticlinal fold is the probable continuation of known active structure. A magnitude 7.1 earthquake occurred on 4 September 2010 near the southeastern edge of our study area. This predominantly right-lateral strike-slip event and numerous aftershocks (ten with magnitudes >= 5 within one week of the main event) highlight the primary message of our paper: that the generally flat and topographically featureless Canterbury Plains is underlain by a network of active faults that have the potential to generate significant earthquakes.

Geodynamic reconstructions of the Australides-2: Mesozoic-Cainozoic

The present work, derived from a full global geodynamic reconstruction model over 600 Ma and based on a large database, focuses herein on the interaction between the Pacific, Australian and Antarctic plates since 200 Ma, and proposes integrated solutions for a coherent, physically consistent scenario. The evolution of the Australia-Antarctica-West Pacific plate system is dependent on the Gondwana fit chosen for the reconstruction. Our fit, as defined for the latest Triassic, implies an original scenario for the evolution of the region, in particular for the "early" opening history of the Tasman Sea. The interaction with the Pacific, moreover, is characterised by many magmatic arc migrations and ocean openings, which are stopped by arc-arc collision, arc-spreading axis collision, or arc-oceanic plateau collision, and subduction reversals. Mid-Pacific oceanic plateaus created in the model are much wider than they are on present-day maps, and although they were subducted to a large extent, they were able to stop subduction. We also suggest that adduction processes (i.e., re-emergence of subducted material) may have played an important role, in particular along the plate limit now represented by the Alpine Fault in New Zealand.

Bedload composition, transport and modification in rivers of Westland, New Zealand, with implications for the distribution of alluvial pounamu (jade)

River bedload surveyed at 50 sites in Westland is dominated by Alpine Schist or Torlesse Greywacke from the Alpine Fault hanging wall, with subordinate Pounamu Ultramafics or footwall-derived Western Province rocks. Tumbling experiments found ultramafics to have the lowest attrition rates, compared with greywacke sandstone and granite (which abrade to produce silt to medium-sand), or incompetent schist (which fragments). Arahura has greater total concentrations (103–105 t/km2) and proportions (5–40%) of ultramafic bedload compared with Hokitika and Taramakau catchments (101–104 t/km2, mostly <10%), matching relative areas of mapped Pounamu Ultramafic bedrock, but enriched relative to absolute areal proportions. Western Province rocks downthrown by the Alpine Fault are under-represented in the bedload. Enriched concentrations of ultramafic bedload decrease rapidly with distance downstream from source rock outcrops, changing near prominent ice-limit moraines. Bedload evolution with transport involves both downstream fining and dilution from tributaries, in a sediment supply regime more strongly influenced by tectonics and the imprint of past glaciation. Treasured New Zealand pounamu (jade) is associated with ultramafic rocks. Chances of discovery vary between catchments, are increased near glacial moraines, and are highest near source-rock outcrops in remote mountain headwaters.

The Palaeozoic metamorphic evolution of the Alpine External Massifs

The pre-Mesozoic metamorphic pattern of the External Massifs, composed of subunits of different metamorphic histories, resulted from the telescoping of Variscan, Ordovician and older metamorphic and structural textures and formations. During an early period, the future External Massifs were part of a peri-Gondwanian microplate evolving as an active margin. Precambrian to lower Palaeozoic igneous and sedimentary protoliths were reworked during an Ordovician subduction cycle (eclogites, granulites) preceding Ordovician anatexis and intrusion of Ordovician granitoids. Little is known about the time period when the microcontinent containing the future External Massifs followed a migration path leading to collision with Laurussia. Corresponding rock-series have not been identified. This might be because they have been eroded or transformed by migmatisation or because they remain hidden in the monocyclic areas. Besides the transformations which originated during the Ordovician subduction cycle, strong metamorphic transformations resulted from Variscan collision when many areas underwent amphibolite facies transformations and migmatisation. The different subunits composing the External Massifs and their corresponding P-T evolution are the expression of different levels in a nappe pile, which may have formed before Visean erosion and cooling. The presence of durbachitic magmatic rocks may be the expression of a large scale Early Variscan upwelling line which formed after Variscan lithospheric subduction. Late Variscan wrench fault tectonics and crustal thinning accompanied by high thermal gradients triggered several pulses of granite intrusions.

Alpine deformation and 40Ar/39Ar geochronology of synkinematic white mica in the Siviez-Mischabel Nappe, western Pennine Alps, Switzerland

We explore the timing of deformation and exhumation of the Siviez-Mischabel Nappe (western Swiss Alps), which has been considered a classic example of a midcrustal crystalline nappe since the studies of Argand [1916]. This study presents Ar-40/Ar-39 ages obtained on both synkinematic white mica from Permo-Triassic cover sediments and more complex white mica populations from basement gneisses of the Siviez-Mischabel and middle Pennine Nappes. Primary foliation developed in cover units by nucleation, growth, and rigid rotation of mica grains during noncoaxial Alpine deformation. Although some samples show a crenulation of this primary foliation, mica growth appears to have occurred only during the development of primary foliation, the main phase of greenschist facies deformation related to imbrication of the Siviez-Mischabel Nappe and other middle Pennine Nappes. Good agreement exists between independent estimates of the timing of deformation and reported Ar-40/Ar-39, white mica ages from cover units of the central and southern Siviez-Mischabel Nappe. In cover units from the central and southern Siviez-Mischabel regions of the study area, Ar-40/Ar-39 ages appear to date synkinematic white mica growth. Results suggest that the Siviez-Mischabel :Nappe was emplaced and developed foliation during a 5 m.y. period from 41 to 36 Ma. In cover units from the eastern Siviez-Mischabel, however, Ar-40/Ar-39 white mica ages appear to date postkinematic thermal events. These thermal events may be related to Oligocene magmatic activity in the lower Pennine Nappes or to Miocene development of the Simplon fault zone. Variations in the relation between Alpine age and grain size for cover samples from the central, eastern, and southern Siviez-Mischabel correlate well with the regional variations in temperature inferred from quartz microfabrics and the pattern of regional metamorphism. When considered in concert with other recent isotopic studies on the timing of major tectonic and thermal events in the western Swiss Alps, these data support arguments that the relative timing of events such as thrusting and back thrusting of crystalline nappes in hinterland units and exhumation of high-pressure units in the suture zone of the western Alps are intimately related and synchronous on the scale of a few million years. Copyright 1998 by the American Geophysical Union.

Fluid-rock interaction during late stages of the Alpine exhumation

Résumé de la thèseLa fracturation des roches au cours de phases compressives ou extensives est un souvent évoquée pour expliquer la circulation de fluide au sein des roches cristallines. Dans le cadre de cette thèse, la circulation des fluides lors de l'exhumation tardive des Alpes a été étudiée en utilisant deux approches différentes: analyses structurales de la déformation fragile d'une part et analyses géochimiques des roches et des minéraux (isotopes stables, datations U/Pb, thermochronologie (U-Th)/He) d'autre part. Cette approche combinée a permis de mieux comprendre l'interaction existante entre les fluides métamorphiques et les fluides météoriques, ainsi que leur interaction avec les roches encaissantes. Le travail a été effectué dans la zone Pennique du Valais suisse.La première partie était focalisée sur la déformation fragile, le but étant de définir les différents types de déformations existantes et de déterminer l'âge relatif des différentes familles de failles. Dans la région d'étude, quatre domaines ont été distingués. Chacun d'eux comportent deux types de structures fragiles, certaines sont minéralisées alors que d'autre non. Au sein de chaque domaine, la direction principale des structures minéralisées correspond à l'orientation des accidents tectoniques majeurs de la région (Aosta- Ranzola Line au Sud, Rhône Line au Nord et Simplon Fault Zone à l'Est), alors que les structures non- minéralisées montrent des orientations plus variables. Ainsi, le premier type de structure est interprété comme résultant d'une dislocation tectonique alors que le deuxième type de structure résulterait d'une dislocation gravitaire locale. Il n'est néanmoins pas possible de classer chronologiquement la formation de ces deux types de structure ni d'attribuer un âge relatif aux changements d'orientation des contraintes majeures.La deuxième étude a été effectuée dans la région de la zone de faille du Simplon. Dans cette zone, la composition isotopique des minéraux ayant cristallisé à l'intérieur des fractures tardives permet de distinguer différents types de circulation de fluide. Les valeurs δ180 du quartz de la roche encaissante ainsi que ceux des veines tardives du bloque inférieur de la faille sont comparables. Ces valeurs indiquent un rééquilibrage et un tamponnage isotopique des fluides tardifs au contact de la roche encaissante lors de la fracturation de cette dernière et de la cristallisation des veines tardives. La même situation est observée dans la partie nord du bloque supérieur ainsi que dans sa partie sud. Ceci n'est néanmoins pas le cas pour la partie centrale du bloque supérieur où les valeurs isotopiques des minéraux dans les veines tardives sont approximativement 3 %o plus basses (avec des valeurs extrêmes négatifs), indiquant une contribution d'eau météorique aux fluides circulant dans les veines. Ces données suggèrent qu'une infiltration d'eau météorique a pu avoir lieu dans le bloque supérieur, où la fracturation des roches est plus intensive car le déplacement relatif le long de la faille y fut plus important, et la température maximale du métamorphisme plus basse. La troisième contribution traite de la géo-thermochronologie de la zone de contact entre la klippe de la Dent Blanche et la nappe de Tsaté. De petits zircons euhédraux ont été trouvés dans un plan de faille minéralisé (parallèle à la Faille du Rhône, voir première partie de l'étude), riche en hématite et quartz, de la zone d'étude. Les analyses U/Pb donnent des âges radiométriques autour de 270 - 280 Ma aux zircons extraits de la minéralisation ainsi que ceux extraits de la roche encaissante, ce qui correspond à l'âge de la nappe de la Dent Blanche et non celui de la nappe du Tsaté qui est elle-même classiquement interprétée comme une ophiolite Jurassique de l'Océan Liguro-Piémontais. Ces données suggèrent que les zircons contenus dans la veine ont été hérités de la roche encaissante. Les résultats (U-Th)/He indiquent un âge de refroidissement différent pour la roche encaissante (25.5 ± 2.0 Ma) que celui de la minéralisation (17.7 ±1.4 Ma). Le thermomètre isotopique quartz-hématite indique une température d'équilibre, et donc de mise en place de la minéralisation, d'environ 170 °C, température très proche de la température de -180 °C de fermeture du zircon pour le système (U-Th)/He. Ceci suggère que l'âge de refroidissement des zircons de la minéralisation correspond aussi à l'âge de formation de la faille.Thesis abstractFluid circulation in fractured rocks is a common process in geology, and it is generally the consequence of faulting and fracturing during both tectonic compression and extension. This thesis is focused on fluid circulation during late stages of the Alpine exhumation. After a structural analysis of the late brittle deformation of the studied samples, several analytical methods (stable isotope investigations, U/Pb radiometric dating, (U-Th)/He thermochronology) have been applied to understand the interaction of metamorphic and meteoric fluids with one another as well as with the host rock. This thesis is articulated around three study directions. All studies were conducted in the Penninic Zone of the Valais, Switzerland. The first study deals with late, brittle deformation and focuses on the different deformation styles and on the relative age of the different families of fractures. In order to do this, late brittle structures observed in four different domains have been subdivided as a function of the existence (or not) and type of mineralization. Comparisons between mineralized and non-mineralized strike directions for all four domains show that mineralized structures follow the strike orientation of major tectonic movements indicated in the Penninic Zone of the Valais (Aosta-Ranzola Line to the S, Rhône Line to the Ν and Simplon Fault Zone to the E), whereas non-mineralized fractures have a more variable strike orientation. This difference could be interpreted as indicative of tectonic-related faulting (mineralized structures) vs. local, collapse-related faulting (non-mineralized fractures), but it is not strong enough to indicate a relative age of the late brittle structures, and/or a change in the orientation of the strain field in post-Miocene times. The second studied area is focused on the Simplon Fault Zone (SFZ). Stable isotope analyses of minerals filling these late fractures indicate that there are two different fluid circulation systems in the footwall and hanging wall of the SFZ. In the footwall, δ180 values of quartz from both the host rock and the late veins range from +10 %o to +12 %o. This is consistent with buffering of circulating fluids by the host rock during fracturing and vein precipitation. In the hanging wall, δΙ80 values for quartz crystals from the host rock and the late veins are similar in both the northern and southern parts of the detachment that are both affected by the same degree of metamorphism (greenschist to the Ν and amphibolite to the S). This is not the case in the central part of the SFZ, where there is a jump from amphibolite facies in the footwall to greenschist facies in the hanging wall. δ,80 values for quartz from the hanging wall late veins are approximately 3.0 %o lower (down to negative values in some cases) than the values observed in the footwall These data suggest that infiltration of meteoric water may have occurred in the most fractured parts of the hanging wall, where relative displacement on the SFZ was the greatest and the peak temperature lower. In the less fractured footwall the δ180 values reflect a host rock-buffered system.The third study is focused on geo-thermochronology at the contact between the Dent Blanche nappe and the Tsaté nappe where small, euhedral zircons were found in a hematite- and quartz-rich mineralization on a late normal fault plane parallel to the Rhône Line (see first part of the study). U/Pb analysis indicates that the zircons - both in the late mineralization and in the host rock - have absolute radiometric ages clustering around 270 - 280 Ma, which is the accepted age for intrusive rocks from the Austroalpine Dent Blanche units but not for the Tsaté nappe. The latter is classically interpreted as an ophiolitic remnant of the Jurassic Liguro-Piemontais Ocean. U/Pb analyses suggest that zircons in late mineralization are all inherited from the host rock; however, results of (U-Th)/He analyses indicate that cooling ages for the host rocks are different to the cooling ages for the zircons in late mineralization. Indeed, the calculated cooling age for the Arolla gneiss is 25.5 ± 2.0 Ma, whilst the cooling age for the associated mineralized fault plane is 17.7 ±1.4 Ma. Oxygen stable isotope fractionation between quartz and hematite in the same late mineralization corresponds to temperatures of about 170 °C. The proximity of the calculated emplacement temperature for the mineralization and the lower accepted closure temperature for zircon in the (U-Th)/He system (-180 °C) imply that the age of 17.7 ± 1.4 Ma can also be interpreted as the formation age of this late brittle fault.Résumé grand publicLa circulation des fluides dans les roches fracturées est typique de nombreux processus géologiques, et très souvent est la conséquence de la fracturation des roches. Cette thèse aborde la question de la circulation des fluides pendant les dernières phases du soulèvement des Alpes. Après une analyse structurale de la fracturation directement sur le terrain, plusieurs méthodes géochimiques ont été appliquées pour comprendre l'interaction entre les différents fluides circulants, et avec leur propre roche mère. L'étude, concentrée sur trois directions principales, a été conduite dans la zone Pennique du Valais suisse. La première partie traite de la déformation cassante dans le secteur cité. L'analyse détaillée des fractures a permis de les subdiviser en structures minéralisées et non-minéralisées, sur quatre domaines différents. La comparaison entre les directions des structures minéralisées et non-minéralisées a permis de montrer que les premières suivent l'orientation des accidents tectoniques majeurs de la région, alors que les structures non- minéralisées ont une orientation plus variable. Cette différence pourrait être interprétée comme indication d'une dislocation tectonique (structures minéralisées) contre une dislocation gravitaire locale (structures non-minéralisées), mais elle n'est pas assez forte pour indiquer un âge relatif des structures tardives et/ou un changement de l'orientation des contraintes après -20 Ma vers le présent.A partir de ces observations, la deuxième étude est concentrée dans la région de la faille du Simplon. Les analyses géochimiques sur les minéraux remplissant les structures tardives indiquent qu'il y a deux différents systèmes de circulation des fluides dans les deux parties (toit et mur) de la faille. Dans le mur, les valeurs isotopiques des minéraux cristallisés à partir d'un fluide tardif sont les mêmes de ceux de la roche mère, donc il y a eu rééquilibration chimique entre fluide et roche pendant la fracturation de cette dernière et la précipitation des minéraux. Dans le toit, les valeurs isotopiques dans la roche mère et dans les minéraux des veines tardives sont comparables dans les parties Ν et S de la faille, où les roches du toit et du mur ont atteint une température maximale - pendant phase prograde de la formation des Alpes - comparable. Au contraire, dans la partie centrale, où le mur a atteint des températures maximales plus élevées par rapport au toit, les valeurs géochimiques des minéralisations tardives du toit sont parfois plus basses que les valeurs observées dans le mur. Ces données suggèrent que l'infiltration de l'eau de surface aurait pu se produire dans la partie plus fracturée du toit, où le déplacement relatif le long de la faille était majeur et les températures maximales mineures. Au contraire, les données géochimiques du mur de la partie centrale indiquent un système isotopique équilibré par la roche mère.La troisième partie de ce travail se base sur l'étude géochimique intégrée des isotopes stables d'Oxygène et radioactifs du Plomb, Uranium, Thorium et Hélium, auprès d'une faille normale minéralisée et des roches de la région à cheval entre deux nappes, la nappe de la Dent Blanche et la nappe de Tsaté. Ici, des petits zircons ont été trouvés dans la minéralisation citée, riche en hématite et quartz. L'analyse radiométrique Uranium/Plomb a montré que les zircons dans la minéralisation et dans les roches autour ont des âges comparables (autour 280 Ma). Cela signifie que les zircons dans la minéralisation tardive ont été hérités de la roche mère pendant la fracturation et la circulation des fluides tardives. De l'autre coté, les résultats des analyses Uranium-Thorium/Hélium indiquent que les âges de refroidissement pour les roches mères sont différents comparés aux âges de refroidissement pour les zircons dans la minéralisation tardive: ces derniers sont plus jeunes d'environ 8 Ma (autour 25 Ma et autour 17 Ma respectivement). Les analyses des isotopes de l'oxygène sur quartz et hématite dans la même minéralisation donnent une température de mise en place de cette dernière d'environ 170° C. La température de fermeture du système chimique des zircons dans le système (Uranium-Thorium)/Hélium est d'environ 180 °C: la proximité de ces deux températures implique que l'âge de refroidissement de la minéralisation tardive peut également être interprété comme âge de formation de la faille.

Structural analysis, clay mineralogy and K-Ar dating of fault gouges from Centovalli Line (Central Alps) for reconstruction of their recent activity

Between the cities of Domodossola and Locarno, the complex ``Centovalli Line'' tectonic zone of the Central Alps outlines deformation phases over a long period of time (probably starting similar to 30 Ma ago) and under variable P-T conditions. The last deformation phases developed gouge-bearing faults with a general E-W trend that crosscuts the roots of the Alpine Canavese zone and the Finero ultramafic body. Kinematic indicators show that the general motion was mainly dextral associated with back thrusting towards the S. The <2 mu m clay fractions of fault gouges from Centovalli Line consist mainly of illite, smectite and chlorite with varied illite-smectite, chlorite-smectite and chlorite-serpentine mixed-layers. Constrained with the illite crystallinity index, the thermal conditions induced by the tectonic activity show a gradual trend from anchizonal to diagenetic conditions. The <2 and <0.2 mu M clay fractions, and hydrothermal K-feldspar separates all provide K-Ar ages between 14.2 +/- 2.9 Ma and roughly 0 Ma, with major episodes at about 12,8, 6 and close to 0 Ma These ages set the recurrent tectonic activity and the associated fluid circulations between Upper Miocene and Recent. On the basis of the K-Ar ages and with a thermal gradient of 25-30 degrees C/km, the studied fault zones were located at a depth of 4-7 km. If they were active until now as observed in field, the exhumation was approximately 2.5-3.0 km for the last 12 Ma with a mean velocity of 0.4 mm/y. Comparison with available models on the recent Alpine evolution shows that the tectonic activity in the area relates to a continuum of the back-thrusting movements of the Canavese Line, and/or to several late-extensional phases of the Rhone-Simplon line. The Centovalli-Val Vigezzo zone therefore represents a major tectonic zone of the Central-Western Alps resulting from different interacting tectonic events. (C) 2011 Elsevier B.V. All rights reserved.

Evoluzione Morfotettonica delle Aree Alpine "Sempione" e "Brennero" attraverso Studi Termocronologici di bassa temperatura

E’ mostrata l’analisi e la modellazione di dati termocronologici di bassa temperatura da due regioni Alpine: il Sempione ed il Brennero. Le faglie distensive presenti bordano settori crostali profondi appartenenti al dominio penninico: il duomo metamorfico Lepontino al Sempione e la finestra dei Tauri al Brennero. I dati utilizzati sono FT e (U-Th)/He su apatite. Per il Sempione i dati provengono dalla bibliografia; per il Brennero si è provveduto ad un nuovo campionamento, sia in superficie che in sotterraneo. Gli attuali lavori per la galleria di base del Brennero (BBT), hanno consentito, per la prima volta, di raccogliere dati di FT e (U-Th)/He in apatite in sottosuolo per la finestra dei Tauri occidentale. Le analisi sono state effettuate tramite un codice a elementi finiti, Pecube, risolvente l’equazione di diffusione del calore per una topografia evolvente nel tempo. Il codice è stato modificato per tener conto dei dati sotterranei. L’inversione dei dati è stata effettuata usando il Neighbourhood Algorithm (NA), per ottenere il più plausibile scenario di evoluzione morfotettonico. I risultati ottenuti per il Sempione mostrano: ipotetica evoluzione dello stile tettonico della faglia del Sempione da rolling hinge a low angle detachment a 6.5 Ma e la cessazione dell’attività a 3 Ma; costruzione del rilievo fino a 5.5 Ma, smantellamento da 5.5 Ma ad oggi, in coincidenza dei cambiamenti climatici Messiniani e relativi all’inizio delle maggiori glaciazioni; incremento dell’esumazione da 0–0.6 mm/anno a 0.6–1.2 mm/anno a 2.4 Ma nell’emisfero settentrionale. I risultati al Brennero mostrano: maggiore attività tettonica della faglia del Brennero (1.3 mm/anno), maggiore attività esumativa (1–2 mm/anno) prima dei 10 Ma; crollo dell’attività della faglia del Brennero fra 10 Ma e oggi (0.1 mm/anno) e dell’attività esumativa nello stesso periodo (0.1–0.3 mm/anno); nessun aumento del tasso esumativo o variazioni topografiche negli ultimi 5 Ma.

Fault current test of a bifilar Bi-2212 bulk coil

A bifilar Bi-2212 bulk coil with parallel shunt resistor was tested under fault current condition using a 3 MVA single-phase transformer in a 220 V-60 Hz line achieving fault current peak of 8 kA. The fault current tests are performed from steady state peak current of 200 A by applying controlled short circuits up to 8 kA varying the time period from one to six cycles. The test results show the function of the shunt resistor providing homogeneous quench behavior of the HTS coil besides its intrinsic stabilizing role. The limiting current ratio achieves a factor 4.2 during 5 cycles without any degradation.