A review of the effects of Transcendental Meditation on cardiovascular disease

Cardiovascular disease (CVD) is the single greatest cause of death in the United States, accounting for nearly 2400 deaths each day. It is estimated that 79.4 million American adults have some form of the disease, and CVD mortality rates are greater than those of cancer, chronic lower respiratory diseases, accidents and diabetes mellitus combined. Psychosocial stress is a nontraditional risk factor for CVD, and can contribute to the clustering of traditional risk factors as well as to vascular manifestations of the disease. The Transcendental Meditation (TM) technique has been researched as a cost effective intervention aimed at decreasing psychosocial stress. This literature review attempts to analyze randomized controlled clinical trials of TM on cardiovascular disease outcomes. Eleven studies met inclusion criteria and are described below, with statistically significant positive outcomes observed in each study. Studies are grouped by primary outcome reported in the categories of cardiovascular function, blood pressure, and exercise tolerance. The TM intervention significantly decreased insulin resistance, heart rate variability, and carotid intima media thickness and improved exercise tolerance compared to control groups. Seven studies also reported significant decreases in blood pressure among hypertensive and normotensive subjects. Five studies focused solely on African American subjects, a population that has disproportionately higher rates of CVD and hypertension, and found significant improvements in CVD outcomes. Further research is recommended to establish the efficacy of TM on CVD outcomes. Future trials should include larger sample populations, wider ethnic distributions of subjects, and longer follow-up to ascertain the impact of this particular stress reduction technique on cardiovascular disease.^

Ação fotodinâmica da C-Ficocianina, pigmento extraído da Spirulina platensis, nas linhagens tumorais humanas K562 (não MDR) e K562 – Lucena 1 (MDR)

A C-ficocianina (C-FC), um pigmento comum nas cianobctérias e um dos mais abundantes constituintes da Spirulina platensis, vem sendo estudada por possuir várias propriedades como antioxidante, hepatoprotetora, antiinflamatória e inibidora da enzima COX-2. Alguns autores atribuem também a C-FC um efeito oxidante quando ela é o agente fotossensibilizante utilizado na terapia fotodinâmica (TFD), podendo ser um importante agente no tratamento do câncer. Entretanto ainda pouco se sabe sobre a ação da C-FC, como substância fotosensibilizante, no tratamento de ação fotodinâmica (AFD) em modelos biológicos. A AFD provoca a fotooxidação de substratos biológicos através da geração de espécies reativas de oxigênio produzidas pela associação entre um determinado comprimento de onda, uma substância fotosensível e oxigênio. Existem dois caminhos que levam a morte celular pelo processo de fotooxidação conhecidos como mecanismo do tipo I e tipo II. No mecanismo tipo I são gerados radicais como o radical ânion superóxido e radical hidroxila, enquanto no mecanismo do tipo II a espécie reativa de oxigênio gerada é o oxigênio singlete (1O2). A TFD da C-PC possui muitas vantagens em relação ao uso das hematoporfirinas e seus derivados, como rápida preparação e fácil purificação, ampla faixa de absorção do UV e visível, nenhum efeito local, e significativa redução da fotosensibilidade em tecidos normais por ter uma rápida metabolização em vivo. As pesquisas que avaliam os possíveis efeitos celulares da AFD têm sido também estendidas para as células tumorais que adquirem fenótipo de resistência a múltiplas drogas (MDR). A MDR é um fenômeno no qual células tumorais, selecionadas resistentes a um agente quimioterápico, adquirem resistência a outras drogas, 5 aparentemente não relacionadas. O fenótipo MDR é multifatorial, mas o mecanismo melhor estudado é a super expressão da glicoproteína-P, que é uma proteína de membrana capaz de fazer a extrusão de quimioterápicos para fora de célula. Com isso o objetivo deste estudo é avaliar a sensibilidade das linhagens celulares que expressem (Lucena) ou não (K562) o fenótipo MDR à AFD do pigmento C-FC, extraído da cianobactéria S. platensis, e propor um possível mecanismo de ação. A extração da C-PC foi feita no Laboratorio de Microbiologia e Engenharia de Bioprocesos (FURG). Diferentes concentrações de C-PC (0.025, 0.05, 0.10, 0.20 e 0.40 mg/ml para os testes de PDA da C-PC e 0.05, 0.10, 0.20, 0.40 e 0.60 mg/ml para os testes no escuro) foram usadas. O número de células viáveis foi avaliada imediatamente, 24 h e 48 h após o tratamento com C-PC ou PDA da C-PC através de exclusão por azul de trypan. A concentração de 0.05 mg/ml foi utilizada para determinar o possível papel da Pgp na resposta da linhagem Lucena e a concentração de 0.10 mg/ml foi utilizada nos testes de peroxidação lipídica (LPO), de produção de espécies reativas de oxigênio (ROS) e quantificação de apoptose/necrose. A PDA da CPC causou uma diminuição no número de células viáveis em ambas linhagens K562 (não MDR) e Lucena (MDR), sendo que a linhagem MDR foi menos sensível que a não MDR. Já nos testes realizados no escuro, nenhuma toxicidade foi encontrada para as duas linhagens. Nenhuma alteração na resistência da linhagem Lucena foi encontrada quando o modulador verapamil foi colocado durante o tratamento de APD com C-PC e até às 48h de acompanhamento após o tratamento. Também não foi encontrada diferença significativa de lipoperoxidação (LPO) mas houve uma tendência de aumento na produção de ROS, que foi mais evidente na linhagem K562. Além disso a linhagem Lucena apresentou uma produção basal de ROS significativamente maior que a K562. Nos testes de apoptose/necrose nenhuma diferença foi encontrada entre as células controle e tratadas em ambas linhagens. Os resultados encontrados neste estudo sugerem que a C-PC possa ser um potente agente fotosensibilizante, tanto para linhagens não MDR quanto para linhagens MDR e também que o mecanismo tipo II esteja envolvido em maior parte no efeito observado na PDA da C-PC, mas uma menor participação do mecanismo tipo I não pode ser descartada. 

Trajectory Mapping ("TM''): A New Non-Metric Scaling Technique

Trajectory Mapping "TM'' is a new scaling technique designed to recover the parameterizations, axes, and paths used to traverse a feature space. Unlike Multidimensional Scaling (MDS), there is no assumption that the space is homogenous or metric. Although some metric ordering information is obtained with TM, the main output is the feature parameterizations that partition the given domain of object samples into different categories. Following an introductory example, the technique is further illustrated using first a set of colors and then a collection of textures taken from Brodatz (1966).

Constrained Linear Spectral Unmixing Technique for Regional Land Cover Mapping Using MODIS Data

Over the last few decades, there has been a significant land cover (LC) change across the globe due to the increasing demand of the burgeoning population and urban sprawl. In order to take account of the change, there is a need for accurate and up-to-date LC maps. Mapping and monitoring of LC in India is being carried out at national level using multi-temporal IRS AWiFS data. Multispectral data such as IKONOS, Landsat-TM/ETM+, IRS-ICID LISS-III/IV, AWiFS and SPOT-5, etc. have adequate spatial resolution (similar to 1m to 56m) for LC mapping to generate 1:50,000 maps. However, for developing countries and those with large geographical extent, seasonal LC mapping is prohibitive with data from commercial sensors of limited spatial coverage. Superspectral data from the MODIS sensor are freely available, have better temporal (8 day composites) and spectral information. MODIS pixels typically contain a mixture of various LC types (due to coarse spatial resolution of 250, 500 and 1000 in), especially in more fragmented landscapes. In this context, linear spectral unmixing would be useful for mapping patchy land covers, such as those that characterise much of the Indian subcontinent. This work evaluates the existing unmixing technique for LC mapping using MODIS data, using end-members that are extracted through Pixel Purity Index (PPI), Scatter plot and N-dimensional visualisation. The abundance maps were generated for agriculture, built up, forest, plantations, waste land/others and water bodies. The assessment of the results using ground truth and a LISS-III classified map shows 86% overall accuracy, suggesting the potential for broad-scale applicability of the technique with superspectral data for natural resource planning and inventory applications. Index Terms-Remote sensing, digital

Immunologic studies on nucleic acids and their components. I. An analysis of the specificity of anti-deoxyadenylate antibodies by a membrane-binding technique

Anti-deoxyadenylate antibodies were produced in rabbits by injecting a conjugate of deoxyadenosine 5′-phosphate with bovine serum albumin. The antisera, as analyzed by double diffusion in agar and the quantitative precipitin reaction, showed hapten-specific antibodies. The specific interaction between [3H]deoxyadenylate and antiserum was studied by a sensitive nitrocellulose membrane-binding assay. The specificity of the antibodies was analyzed by measuring the effectiveness of other nucleotides or derivatives to inhibit the hapten-antibody binding. The requirements for recognition by the antibody sites were studied by using a series of naturally occurring nucleic acid components as well as some synthetic derivatives as inhibitors. The antibodies were found to show a high degree of specificity for the whole nucleotide, the base, sugar and phosphate playing almost equally important roles. There was cross reactivity with other mononucleotides, although of a low order. The antibodies were able to react with DNA and tRNA.

Copper Diffusion Barrier Deposition on Integrated Circuit Devices by Atomic Layer Deposition Technique

Transfer from aluminum to copper metallization and decreasing feature size of integrated circuit devices generated a need for new diffusion barrier process. Copper metallization comprised entirely new process flow with new materials such as low-k insulators and etch stoppers, which made the diffusion barrier integration demanding. Atomic Layer Deposition technique was seen as one of the most promising techniques to deposit copper diffusion barrier for future devices. Atomic Layer Deposition technique was utilized to deposit titanium nitride, tungsten nitride, and tungsten nitride carbide diffusion barriers. Titanium nitride was deposited with a conventional process, and also with new in situ reduction process where titanium metal was used as a reducing agent. Tungsten nitride was deposited with a well-known process from tungsten hexafluoride and ammonia, but tungsten nitride carbide as a new material required a new process chemistry. In addition to material properties, the process integration for the copper metallization was studied making compatibility experiments on different surface materials. Based on these studies, titanium nitride and tungsten nitride processes were found to be incompatible with copper metal. However, tungsten nitride carbide film was compatible with copper and exhibited the most promising properties to be integrated for the copper metallization scheme. The process scale-up on 300 mm wafer comprised extensive film uniformity studies, which improved understanding of non-uniformity sources of the ALD growth and the process-specific requirements for the ALD reactor design. Based on these studies, it was discovered that the TiN process from titanium tetrachloride and ammonia required the reactor design of perpendicular flow for successful scale-up. The copper metallization scheme also includes process steps of the copper oxide reduction prior to the barrier deposition and the copper seed deposition prior to the copper metal deposition. Easy and simple copper oxide reduction process was developed, where the substrate was exposed gaseous reducing agent under vacuum and at elevated temperature. Because the reduction was observed efficient enough to reduce thick copper oxide film, the process was considered also as an alternative method to make the copper seed film via copper oxide reduction.

Contrained linear spectral unmixing technique for regional land cover mapping using MODIS data

Over the last few decades, there has been a significant land cover (LC) change across the globe due to the increasing demand of the burgeoning population and urban sprawl. In order to take account of the change, there is a need for accurate and up- to-date LC maps. Mapping and monitoring of LC in India is being carried out at national level using multi-temporal IRS AWiFS data. Multispectral data such as IKONOS, Landsat- TM/ETM+, IRS-1C/D LISS-III/IV, AWiFS and SPOT-5, etc. have adequate spatial resolution (~ 1m to 56m) for LC mapping to generate 1:50,000 maps. However, for developing countries and those with large geographical extent, seasonal LC mapping is prohibitive with data from commercial sensors of limited spatial coverage. Superspectral data from the MODIS sensor are freely available, have better temporal (8 day composites) and spectral information. MODIS pixels typically contain a mixture of various LC types (due to coarse spatial resolution of 250, 500 and 1000 m), especially in more fragmented landscapes. In this context, linear spectral unmixing would be useful for mapping patchy land covers, such as those that characterise much of the Indian subcontinent. This work evaluates the existing unmixing technique for LC mapping using MODIS data, using end- members that are extracted through Pixel Purity Index (PPI), Scatter plot and N-dimensional visualisation. The abundance maps were generated for agriculture, built up, forest, plantations, waste land/others and water bodies. The assessment of the results using ground truth and a LISS-III classified map shows 86% overall accuracy, suggesting the potential for broad-scale applicability of the technique with superspectral data for natural resource planning and inventory applications.

Judd-Ofelt analysis of spectra and experimental evaluation of laser performance of Tm3+ doped Lu2SiO5 crystal

This paper reports that the TM3+:Lu2SiO5 (Tm:LSO) crystal is grown by Czochralski technique. The room-temperature absorption spectra of Tm:LSO crystal are measured on a b-cut sample with 4 at.% thulium. According to the obtained Judd-Ofelt intensity parameters Omega(2)=9.3155 x 10(-20) cm(2), Omega(4)=8.4103 x 10(-20) cm(2), Omega(6)=1.5908 x 10(-20) cm(2), the fluorescence lifetime is calculated to be 2.03 ms for F-3(4) -> H-3(6) transition, and the integrated emission cross section is 5.81 x 10(-18) cm(2). Room-temperature laser action near 2 mu m under diode pumping is experimentally evaluated in Tm:LSO. An optical-optical conversion efficiency of 9.1% and a slope efficiency of 16.2% are obtained with continuous-wave maximum output power of 0.67 W. The emission wavelengths of Tm:LSO laser are centred around 2.06 mu m with spectral bandwidth of similar to 13.6 nm.

Judd-Oflet analysis of spectrum and laser performance of Ho:YAP crystal end-pumped by 1.91-mu m Tm:YLF laser

The Ho:YAP crystal is grown by the Czochralski technique. The room-temperature polarized absorption spectra of Ho:YAP crystal was measured on a c-cut sample with 1 at% holmium. According to the obtained Judd-Ofelt intensity parameters Omega(2) = 1.42 x 10(-20) cm(2), Omega(4) = 2.92 x 10(-20) cm(2), and Omega(6) = 1.71 x 10(-20) cm(2), this paper calculated the fluorescence lifetime to be 6 ms for I-5(7) -> I-5(8) transition, and the integrated emission cross section to be 2.24 x 10(-18) cm(2). It investigates the room-temperature Ho:YAP laser end-pumped by a 1.91-mu m Tm:YLF laser. The maximum output power was 4.1 W when the incident 1.91-mu m pump power was 14.4W. The slope efficiency is 40.8%, corresponding to an optical-to-optical conversion efficiency of 28.4%. The Ho:YAP output wavelength was centred at 2118 nm with full width at half maximum of about 0.8 nm.

High-Q TM whispering-gallery modes in three-dimensional microcylinders

We present a generation condition for realizing high-Q TM whispering-gallery modes (WGMs) in semiconductor microcylinders. For microcylinders with symmetry or weak asymmetry vertical waveguiding, we show that TM WGMs can have a high Q factor, with the magnitude of 10(4) at the radius of the microcylinder of 1 mu m, by three-dimensional numerical simulation. The Q factor of TE WGMs is much less than that of TM WGMs in the semiconductor microcylinders due to a vertical radiation loss caused by mode coupling with the vertical propagating mode. The results open up a possible application of TM WGMs in semiconductor microcylinders for efficient current injection microlasers and single photon sources.

High Q-factor TM modes in three-dimensional semiconductor microresonators

We have investigated the mode characteristics for three-dimensional (3D) semiconductor microresonators by finite-difference time-domain (FDTD) technique. The results show that the quality-factors (Q-factors) of TM-like modes are much larger than those of TE-like modes as the vertical waveguidng formed by semiconductor materials.

Alteration mineral mapping using masking and Crosta technique for mineral exploration in mid-vegetated areas: a case study in Areletuobie, Xinjiang (China)

Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM)+ data have been successfully employed in the field of mineral exploration to identify key minerals over arid and semi-arid terrains. However, redundant vegetation and cloud may seriously interfere with the discrimination of the minerals with diagnostic features. Therefore, in this study, we use masking technique to eliminate the negative influence of vegetation and cloud and Crosta technique to identify the diagnostic features of hydroxyl-minerals, carbonate-minerals and iron oxides. Then the anomalies were endowed with special colours and overlapped with the remote-sensing and geochemical data, overlaying images as remote-sensing anomalies. The mineral exploration work was carried through by synthetic analysis of the remote-sensing images, geochemical data and structures. Finally, areas with high correlation between the occurrence of hydrothermal alteration and presence of main faults and geochemical anomalies were considered as mineral exploration targets worthy of further detailed exploration programmes.

Mechanical cell lysis technique for plasmid recovery

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Engenharia de Recursos Naturais, Universidade do Algarve, 2008

Theoretical investigations of an annular elliptical ring microstrip antenna using Green‘s function technique

Analytical expressions for the Green’s function of an annular elliptical ring microstrip antenna (AERMA) are developed and reported. The modal, radiation and input impedance characteristics of the TM, modes are determined from these expressions. The resonant frequencies of odd modes are greater than that of the even modes for all TMnl modes (n = 1, 2, 3, ...) udke elliptical microstrip structures. The radiation pattern and input imedance curves of TMI2 mode on comparison with available experimental result shows good agreement whch provides an independent validation to this technique. The performance of the AERMA is then investigated as a function of thickness and substrate dielectric permittivity.