Nd:YAG Laser Welding of 5083 Aluminium Alloy using Filler Wire

High reflectivity and high thermal conductivity, high vapour pressure of alloyingelements as well as low liquid surface tension and low ionisation potential, make laser welding of aluminium and its alloys a demanding task.Problems that occur during welding are mainly process instabilities of the keyhole and the melt pool, increased plasma formation above the melt pool and loss of alloying elements. These problems lead to unwanted metallurgical defects like hot cracks and porosity in the weld bead andother problems concerning the shape and appearance of the weld bead. In order to minimise the defects and improve the weld quality, the process and beam parameters need to be carefully adjusted along with a consideration concerning the use of filler wire for the welding process. In this work the welding of 3,0 mm thick grade 5083 aluminium alloy plates using a 3,0 kW Nd:YAG laser with grade 5183 filler wire addition is investigated. The plates were welded as butt joints with air gap sizes 0,5 mm, 0,7mm and 1,0 mm. The analysis of the weld beads obtained from the weldedsamples showed that the least imperfections were produced with 0,7 mm air gaps at moderate welding speeds. The analysis also covered the calculation of the melting efficiency and the study of the shape of the weld bead. The melting efficiency was on average around 20 % for the melting process of the welded plates. The weld beads showed the characteristic V-shape of a laser weld and retained this shape during the whole series of experiments.

Dissociation of deprotonated microcystin variants by collision-induced dissociation following electrospray ionization

Microcystins (MC) are a family of hepatotoxic cyclic heptapeptides produced by a number of different cyanobacterial species. Considering the recent advances in the characterization of deprotonated peptides by mass spectrometry, the fragmentation behavior of four structurally related microcystin compounds was investigated using collision-induced dissociation (CID) experiments on an orbitrap mass spectrometer. It is demonstrated in this study that significant structural information can be obtained from the CID spectra of deprotonated microcystins. A predominant ring-opening reaction at the isoMeAsp residue, as well as two major complementary fragmentation pathways, was observed, reducing the complexity of the product ion spectra in comparison with spectra observed from protonated species. This proposed fragmentation behavior was applied to characterize [Leu(1)]MC-LR from a cyanobacterial cell extract. In conclusion, CID spectra of microcystins in the negative ion mode provide rich structurally informative mass spectra which greatly enhance confidence in structural assignments, in particular when combined with complementary positive ion CID spectra. Copyright (C) 2011 John Wiley & Sons, Ltd.

Soldadura de ligas de alumínio de construção naval

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia dos Materiais

Emissions of nanoparticles during friction stir welding (FSW) of aluminium alloys

Friction stir welding (FSW) is now well established as a welding process capable of joining some different types of metallic materials, as it was (1) found to be a reliable and economical way of producing high quality welds, and (2) considered a "clean" welding process that does not involve fusion of metal, as is the case with other traditional welding processes. The aim of this study was to determine whether the emission of particles during FSW in the nanorange of the most commonly used aluminum (Al) alloys, AA 5083 and AA 6082, originated from the Al alloy itself due to friction of the welding tool against the item that was being welded. Another goal was to measure Al alloys in the alveolar deposited surface area during FSW. Nanoparticles dimensions were predominantly in the 40- and 70-nm range. This study demonstrated that microparticles were also emitted during FSW but due to tool wear. However, the biological relevance and toxic manifestations of these microparticles remain to be determined.

FPGA implementation of IEEE 802.15.3C receiver

This paper presents the implementation of the OFDM demodulator and the Viterbi decoder, proposed as part of a wireless High Definition video receiver to be integrated in an FPGA. These blocks were implemented in a Xilinx Virtex-6 FPGA. The complete system was previously modeled and simulated using MATLAB/Simulink to extract importante hardware characteristics for the FPGA implementation.

Análise do comportamento estrutural de uma lancha salva-vidas

Dissertação para obtenção do grau de Mestre em Engenharia Mecânica

Estudo de avaliação de emissões de nanopartículas na soldadura por fricção linear de ligas de alumínio

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Estrategias reproductivas de lagartos del género tupinambis en distintos contextos ecológicos de la Provincia de Córdoba. Reproductive strategies of lizards of genus tupinambis in different ecological contexts of the Cordoba province.

Los caracteres de historia de vida son sensibles a la variación histórica o actual de los factores ambientales. Estudiar dicha variabilidad mediante la realización de estudios comparativos permite obtener evidencias sobre las causas de la evolución de ciertos caracteres. Los lagartos son excelentes modelos para el estudio de selección sexual y evolución del comportamiento social y reproductivo debido a que su relativa baja dispersión podría tener consecuencias evolutivas profundas en el desarrollo de distintas estrategias, ya que las poblaciones, al encontrarse más aisladas, podrían verse influenciadas por las fuerzas selectivas locales, mostrando una alta heterogeneidad espacial y temporal. Por eso nos propusimos realizar este trabajo para evaluar si existen diferentes estrategias reproductivas en los lagartos del género Tupinambis en distintos contextos ecológicos de la provincia de Córdoba. Para ello analizaremos distintas características de la historia de vida en poblaciones de estas especies tales como estructura de tamaño, sexo operativo, frecuencia reproductiva, tamaño de camada, condición corporal reproductiva, tamaño de madurez sexual, características espermáticas, elección de sitios de nidificación, etc. Además analizaremos la estructura genética de las poblaciones para inferir procesos demográficos históricos y patrones actuales de flujo génico y conectividad. The life history traits are sensitive to historical or current variation of environmental factors. Studying this variability by performing comparative studies allows obtaining evidence on the causes of the evolution of certain characters. Lizards are excellent models for studying sexual selection and evolution of social and reproductive behavior because their relatively low dispersal capabilities could have profound evolutionary consequences in the development of different strategies, since isolated populations may be stronger influenced by local selective forces, showing a high spatial and temporal heterogeneity. We decided to perform this study to assess whether there are different reproductive strategies in lizards of the genus Tupinambis in different ecological contexts of the Cordoba province. We will analyze different life history traits in populations of these species such as size structure, operational sex ratio, reproductive frequency, litter size, body condition, size at sexual maturity, sperm characteristics, choice of nesting sites, etc.. We also analyzed the genetic structure of populations to infer historical demographic processes and current patterns of gene flow and connectivity.

Arsenite interferes with protein folding and triggers formation of protein aggregates in yeast.

Several metals and metalloids profoundly affect biological systems, but their impact on the proteome and mechanisms of toxicity are not fully understood. Here, we demonstrate that arsenite causes protein aggregation in Saccharomyces cerevisiae. Various molecular chaperones were found to be associated with arsenite-induced aggregates indicating that this metalloid promotes protein misfolding. Using in vivo and in vitro assays, we show that proteins in the process of synthesis/folding are particularly sensitive to arsenite-induced aggregation, that arsenite interferes with protein folding by acting on unfolded polypeptides, and that arsenite directly inhibits chaperone activity. Thus, folding inhibition contributes to arsenite toxicity in two ways: by aggregate formation and by chaperone inhibition. Importantly, arsenite-induced protein aggregates can act as seeds committing other, labile proteins to misfold and aggregate. Our findings describe a novel mechanism of toxicity that may explain the suggested role of this metalloid in the etiology and pathogenesis of protein folding disorders associated with arsenic poisoning.

Approaches to OER Development

OER development is becoming more sophisticated as instructors and course specialists become more familiar with the environment. Most OER development approaches for online courses have been developed from those that were appropriate in the face-to-face context. However, the OER online environment opens up new possibilities for learning as well as holding particular limitations. This paper presents some approaches that OER implementers should bear in mind when initiating and supporting OER course development projects.1. Beg, borrow, or steal courseware. Don't reinvent the wheel.2. Take what exists and build the course around it.3. Mix and match. Assemble. Don't create.4. Avoid the "not invented here" syndrome. 5. Know the content -garbage in and garbage out.6. Establish deadlines. Work to deadlines, but don't be unrealistic. 7. Estimate your costs and then double them. Double them again. 8. Be realistic in scheduling and scoping.9. The project plan must be flexible. Be prepared for major shifts.10. Build flexibly for reuse and repurposing -generalizability reduces costs 11. Provide different routes to learning. 12. Build to international standards.There are necessary features in every OER, including introduction, schedule etc. but it is most important to keep the course as simple as possible. Extreme Programming (XP) methodology can be adapted from software engineering to aid in the course development process.

Brain tissue properties differentiate between motor and limbic basal ganglia circuits.

Despite advances in understanding basic organizational principles of the human basal ganglia, accurate in vivo assessment of their anatomical properties is essential to improve early diagnosis in disorders with corticosubcortical pathology and optimize target planning in deep brain stimulation. Main goal of this study was the detailed topological characterization of limbic, associative, and motor subdivisions of the subthalamic nucleus (STN) in relation to corresponding corticosubcortical circuits. To this aim, we used magnetic resonance imaging and investigated independently anatomical connectivity via white matter tracts next to brain tissue properties. On the basis of probabilistic diffusion tractography we identified STN subregions with predominantly motor, associative, and limbic connectivity. We then computed for each of the nonoverlapping STN subregions the covariance between local brain tissue properties and the rest of the brain using high-resolution maps of magnetization transfer (MT) saturation and longitudinal (R1) and transverse relaxation rate (R2*). The demonstrated spatial distribution pattern of covariance between brain tissue properties linked to myelin (R1 and MT) and iron (R2*) content clearly segregates between motor and limbic basal ganglia circuits. We interpret the demonstrated covariance pattern as evidence for shared tissue properties within a functional circuit, which is closely linked to its function. Our findings open new possibilities for investigation of changes in the established covariance pattern aiming at accurate diagnosis of basal ganglia disorders and prediction of treatment outcome.

ABD e-News Special Edition - May 18, 2007

Weekly newsletter

L'Univers

1881/10/06 (Numéro 5083).