3D teaching: the ideal complement for professionals in design and construction

Today, the requirement of professional skills to university students is constantly increasing in our society. In our opinion, the content offered in official degrees need to be nourished with different variables, enriching their global professional knowledge in a parallel way; that is why, in recent years, there is a great multiplicity of complementary courses at university. One of the most socially demanded technical requirements within the architectural, design or engineering field is the management of 3D drawing software, becoming an indispensable reality in these sectors. Thus, this specific training becomes essential over two-dimension traditional design, because the inclusion of great possibilities of spatial development that go beyond conventional orthographic projections (plans, sections or elevations), allowing modelling and rotation of the selected items from multiple angles and perspectives. Therefore, this paper analyzes the teaching methodology of a complementary course for those technicians in the construction industry interested in computer-aided design, using modelling (SketchupMake) and rendering programs (Kerkythea). The course is developed from the technician point of view, by learning computer management and its application to professional development from a more general to a more specific view through practical examples. The proposed methodology is based on the development of real examples in different professional environments such as rehabilitation, new constructions, opening projects or architectural design. This multidisciplinary contribution improves criticism of students in different areas, encouraging new learning strategies and the independent development of three-dimensional solutions. Thus, the practical implementation of new situations, even suggested by the students themselves, ensures active participation, saving time during the design process and the increase of effectiveness when generating elements which may be represented, moved or virtually tested. In conclusion, this teaching-learning methodology improves the skills and competencies of students to face the growing professional demands of society. After finishing the course, technicians not only improved their expertise in the field of drawing but they also enhanced their capacity for spatial vision; both essential qualities in these sectors that can be applied to their professional development with great success.

Aplicación del dibujo arquitectónico en 3D para el análisis histórico de los sistemas constructivos industrializados

La condición tridimensional de la construcción edificatoria precisa del uso del dibujo en 3D como la mejor herramienta de proyecto y transmisión de conocimientos técnicos y formales. El objetivo de esta comunicación es mostrar la aplicación de la expresión gráfica en 3D en un análisis histórico sobre la evolución de la envolvente industrializada en arquitectura, identificando sus principales condicionantes técnicos y constructivos. El estudio compara la evolución del uso de sistemas constructivos industrializados mediante un análisis gráfico de las soluciones constructivas más destacables. La metodología empleada se basa en la identificación y estudio de determinados sistemas constructivos industrializados compuestos por materiales ligeros así como de obras de arquitectura representativas por su influencia en la evolución de la envolvente arquitectónica en la segunda mitad del siglo XX. La representación gráfica en 3D ayuda a comparar las obras analizadas desde aspectos tecnológicos y formales, constatándose la utilidad del dibujo asistido por ordenador en el análisis constructivo realizado. En conclusión, el uso del dibujo arquitectónico en 3D contribuye, por la mejor comprensión de las características espaciales de las soluciones constructivas, al análisis de las propiedades materiales y funcionales de los sistemas constructivos industrializados y su aplicación al diseño arquitectónico, ayudando a perfeccionar su conocimiento e incrementando la calidad constructiva y compromiso social de las propuestas arquitectónicas.

Tutorial 2.0 on Technical Drawing 3D and Visualization

In recent years, the continuous incorporation of new technologies in the learning process has been an important factor in the educational process [1]. The Technical University of Madrid (UPM) promotes educational innovation processes and develops projects related to the improvement of the education quality. The experience that we present fits into the Educational Innovation Project (EIP) of the E.U. of Agricultural Engineering of Madrid. One of the main objectives of the EIP is to "Take advantage of the new opportunities offered by the Learning and Knowledge Technologies in order to enrich the educational processes and teaching management" [2].

Tutorial 2.0 on Technical Drawing 3D and Visualization

In recent years, the continuous incorporation of new technologies in the learning process has been an important factor in the educational process (1). The Technical University of Madrid (UPM) promotes educational innovation processes and develops projects related to the improvement of the education quality. The experience that we present fits into the Educational Innovation Project (EIP) of the E.U. of Agricultural Engineering of Madrid. One of the main objectives of the EIP is to Take advantage of the new opportunities offered by the Learning and Knowledge Technologies in order to enrich the educational processes and teaching management (2).

Visualização e manipulação de informação em ambientes 3D imersivos

Ainda antes da invenção da escrita, o desenho foi utilizado para descrever a realidade, tendo evoluído ao longo dos tempos, ganhando mais qualidade e pormenor e recorrendo a suportes cada vez mais evoluídos que permitissem a perpetuação dessa imagem: dessa informação. Desde as pinturas rupestres, nas paredes de grutas paleolíticas, passando pelos hieróglifos, nos templos egípcios, nas gravuras das escrituras antigas e nos quadros sobre tela, a intenção sempre foi a de transmitir a informação da forma mais directa e perceptível por qualquer indivíduo. Nos dias de hoje as novas tecnologias permitem aceder à informação com uma facilidade nunca antes vista ou imaginada, estando certamente ainda por descobrir outras formas de registar e perpetuar a informação para as gerações vindouras. A fotografia está na origem das grandes evoluções da imagem, permitindo capturar o momento, tornando-o “eterno”. Hoje em dia, na era da imagem digital, além de se mostrar a realidade, é possível incorporar na imagem informação adicional, de modo a enriquecer a experiência de visualização e a maximizar a aquisição do conhecimento. As possibilidades da visualização em três dimensões (3D) vieram dar o realismo que faltava ao formato de fotografia original. O 3D permite a imersão do espectador no ambiente que, a própria imagem retrata, à qual se pode ainda adicionar informação escrita ou até sensorial como, por exemplo, o som. Esta imersão num ambiente tridimensional permite ao utilizador interagir com a própria imagem através da navegação e exploração de detalhes, usando ferramentas como o zoom ou ligações incorporados na imagem. A internet é o local onde, hoje em dia, já se disponibilizam estes ambientes imersivos, tornando esta experiência muita mais acessível a qualquer pessoa. Há poucos anos ainda, esta prática só era possível mediante o recurso a dispositivos especificamente construídos para o efeito e que, por isso, apenas estavam disponíveis a grupos restritos de utilizadores. Esta dissertação visa identificar as características de um ambiente 3D imersivo e as técnicas existentes e possíveis de serem usadas para maximizar a experiência de visualização. Apresentar-se-ão algumas aplicações destes ambientes e sua utilidade no nosso dia-a-dia, antevendo as tendências futuras de evolução nesta área. Serão apresentados exemplos de ferramentas para a composição e produção destes ambientes e serão construídos alguns modelos ilustrativos destas técnicas, como forma de avaliar o esforço de desenvolvimento e o resultado obtido, comparativamente com formas mais convencionais de transmitir e armazenar a informação. Para uma avaliação mais objectiva, submeteram-se os modelos produzidos à apreciação de diversos utilizadores, a partir da qual foram elaboradas as conclusões finais deste trabalho relativamente às potencialidades de utilização de ambientes 3D imersivos e suas mais diversas aplicações.

3D-tuoteyhdistelmämallien ja mittakuvien tuottaminen PDM-järjestelmästä

Tämä diplomityö on selvitystyö mittakuvien ja kolmiulotteisten CAD-mallien tuottamisesta. Mittakuvat ja 3D-CAD-mallit halutaan Neles-tuotemerkin omaaville tuotteille. Olennaisena osana työssä on tuotetiedonhallintajärjestelmä AtonPDM, koska mittakuvia ja malleja toivottaisiin hallittavan AtonPDM-järjestelmällä. Työ tehdään Metso Automationin (MA) Flow Control (FC) –liiketoimintalinjalle. Nykyiset mittakuvat aiheuttavat ongelmia sekä MA:ssa että asiakkaille. MA:ssa mittakuvien tekeminen kestää kauemmin kuin asiakas toivoisi. Nykyisen mittakuvaohjelmiston riittämättömät ominaisuudet aiheuttavat lisätyötä mittakuvien valmistuksessa. Asiakkaille mittakuvien viivästyminen on suunnittelua hidastava tekijä. Mittakuvissa olevat virheet ja puutteet vaikeuttavat asiakkaan suunnittelutyötä ja saattavat päästä läpi tarkatuksien myös loppusuunnitelmiin, jolloin seurauksena voi olla rahallisia menetyksiä. Tämän päivän putkistosuunnittelu hoidetaan suurimmaksi osaksi 3D-CADohjelmistoilla. Suunnittelua helpotetaan ja nopeutetaan valmiilla komponenttien 3Dmalleilla, joihin on liitetty tuotetietoa. Työssä on haastateltu MA:n henkilökuntaa, CAD-järjestelmien toimittajia ja asiakkaita. Haastattelut ovat työn tärkein tiedonlähde. Teoriatietoa on selvitetty kirjoista, lehdistä ja internetistä. Teoriaosiossa käydään läpi tuotetiedonhallinta (Product Data Management, PDM), tietokanta ja parametrinen mallintaminen. Työn lopputuloksena on pyritty saamaan kuvaus siitä miten tuotetaan 3D-CAD-mallit ja mittakuvat Neles-tuotteista käyttäen tiedonlähteenä AtonPDM:ää ja millaisia 3Dmallien ja mittakuvien tulee olla. Malleja ja mittakuvia tuottavaan järjestelmään on etsitty ratkaisuja CAD-ohjelmistoista. Ratkaisuja on verrattu keskenään ominaisuuksien, joustavuuden ja AtonPDM yhteensopivuuden perusteella.

Tribological Testing of Some Potential PVD and CVD Coatings for Steel Wire Drawing Dies

Cemented carbide is today the most frequently used drawing die material in steel wire drawing applications. This is mainly due to the possibility to obtain a broad combination of hardness and toughness thus meeting the requirements concerning strength, crack resistance and wear resistance set by the wire drawing process. However, the increasing cost of cemented carbide in combination with the possibility to increase the wear resistance of steel through the deposition of wear resistant CVD and PVD coatings have enhanced the interest to replace cemented carbide drawing dies with CVD and PVD coated steel wire drawing dies. In the present study, the possibility to replace cemented carbide wire drawing dies with CVD and PVD coated steel drawing dies have been investigated by tribological characterisation, i.e. pin-on-disc and scratch testing, in combination with post-test observations of the tribo surfaces using scanning electron microscopy, energy dispersive X-ray spectroscopy and 3D surface profilometry. Based on the results obtained, CVD and PVD coatings aimed to provide improved tribological performance of steel wire drawing dies should display a smooth surface topography, a high wear resistance, a high fracture toughness (i.e. a high cracking and chipping resistance) and intrinsic low friction properties in contact with the wire material. Also, the steel substrate used must display a sufficient load carrying capacity and resistance to thermal softening. Of the CVD and PVD coatings evaluated in the tribological tests, a CVD TiC and a PVD CrC/C coating displayed the most promising results.

Metamorphic epiphany -- 3D animation

As far back as I can remember, I have always been interested in studio art. Whether it be painting, drawing, printmaking, or photography, it has consistently been a part of my life. Upon enrolling in Colby, I became interested in computers and decided to major my undergraduate college career in Computer Science. Not forgetting past interests, I continued my studio art education, taking several classes within the Art department. In due time, I began combining interests and began studying Computer Graphics and Design. With limited resources in this field at Colby, the majority of my computer graphic education and experience has been done on my own time apart from regular classroom work. As time progressed, so did my interests. Starting with simple image manipulation of digitally scanned photographs, I moved on to Web Page design, eventually leading to Desktop Publishing. Ultimately, I wanted to take a step further and expand my overall computer graphic knowledge by learning 3D modeling and animation. With even fewer resources in 3D animation at Colby, I perceived having trouble finding the information and tools I would need to gain the necessary skills for this new field. The Senior Scholars program gave me the opponunity to find and acquire the necessary tools to pursue my interest. This program also allowed me to devote the proper amount of time required for learning these new tools.

Estudo e modelagem 3D de uma turbina Francis

Most of the hydraulic turbines that are running in the world are the Francis type, because they are able to fit a wide range of head and flow. We also can declare that most of the installed hydraulic energy up to this date is generated by this type of turbine. On the other hand, if we pay attention to mechanical details of a Francis turbine we will see that among the three most used types it is the one that presents the more complex design. And, the simplest one is the Pelton type, whereas the Kaplan is the one less utilized. This work aims to develop the hydrodynamic calculation of a Francis turbine as well as to obtain its assembly drawing and 3D modeling drawing. In this way all details must be shown therefore needing a complete knowledge about this issue. Both 2D and 3D drawings help much if one wants the machine to be running in its power house. It is well noted that most of the entities that design and manufacture the Francis turbines are not brazilian. In this way the more we study how to design this kind of machine the more is our contribution to our country in order to conquer technology and manufacture Francis turbines

Um processo para utilizar a tecnologia de impressão 3D na construção de instrumentos didáticos para o ensino de Ciências

Pós-graduação em Educação para a Ciência - FC

A new 3D modelling paradigm for discrete model

Until few years ago, 3D modelling was a topic confined into a professional environment. Nowadays technological innovations, the 3D printer among all, have attracted novice users to this application field. This sudden breakthrough was not supported by adequate software solutions. The 3D editing tools currently available do not assist the non-expert user during the various stages of generation, interaction and manipulation of 3D virtual models. This is mainly due to the current paradigm that is largely supported by two-dimensional input/output devices and strongly affected by obvious geometrical constraints. We have identified three main phases that characterize the creation and management of 3D virtual models. We investigated these directions evaluating and simplifying the classic editing techniques in order to propose more natural and intuitive tools in a pure 3D modelling environment. In particular, we focused on freehand sketch-based modelling to create 3D virtual models, interaction and navigation in a 3D modelling environment and advanced editing tools for free-form deformation and objects composition. To pursuing these goals we wondered how new gesture-based interaction technologies can be successfully employed in a 3D modelling environments, how we could improve the depth perception and the interaction in 3D environments and which operations could be developed to simplify the classical virtual models editing paradigm. Our main aims were to propose a set of solutions with which a common user can realize an idea in a 3D virtual model, drawing in the air just as he would on paper. Moreover, we tried to use gestures and mid-air movements to explore and interact in 3D virtual environment, and we studied simple and effective 3D form transformations. The work was carried out adopting the discrete representation of the models, thanks to its intuitiveness, but especially because it is full of open challenges.

The elements of drawing, in three letters to beginners /

3d ed. Cf. Wise. Complete bibliography ... of Ruskin, 68.

A integração e compreensão do desenho na modelação 3D : enquadramento académico

Na medida em que os produtos e os processos de criação são cada vez mais mediados digitalmente, existe uma reflexão recente acerca da relação entre as imagens e as ferramentas usadas para a sua produção. A relação natural e estreita entre a dimensão conceptual e a dimensão física abre a discussão ao nível da semântica e dos processos da projetação e manipulação das imagens, nas quais estão naturalmente incluídas as ferramentas CAD. Tendo o desenho um papel inequívoco e fundamental no exercício da projetação e da modelação 3D é pertinente perceber a relação e a articulação entre estas duas ferramentas. Reconhecendo o desenho como uma ferramenta de domínio físico capaz de expressar o pensamento que opera a transformação de concepções abstratas em concepções concretas, reconhecê-lo refletido na dimensão virtual através de um software CAD 3D não é trivial, já que este, na generalidade, é processado através de um pensamento cujo contexto é distante da materialidade. Metodologicamente, abordaremos esta questão procurando a verificação da hipótese através de uma proposta de exercício prático que procura avaliar o efeito que as imagens analógicas poderão ter sobre o reconhecimento e operatividade da ferramenta Blender num enquadramento académico. Pretende-se, pois, perceber como o desenho analógico pode integrar o processo de modelação 3D e qual a relação que mantém com quem elas opera. A articulação do desenho com as ferramentas de produção de design, especificamente CAD 3D, permitirá compreender na especialidade a articulação entre ferramentas de diferentes naturezas tanto no processo da projetação quanto na criação de artefactos visuais. Assim como poderá lançar a discussão acerca das estratégias pedagógicas de ensino do desenho e do 3D num curso de Design.

Relating Innovative 2D Ideas into 3D Garments in Terms of Structure, Using ‘Sculptural Form Giving’ as an Intermediate Step in Creation.

This research focuses on finding a fashion design methodology to reliably translate innovative two-dimensional ideas on paper, via a structural design sculpture, into an intermediate model. The author, both as a fashion designer and a researcher, has witnessed the issues which arise, regarding the loss of some of the initial ideas and distortion during the two-dimensional creative sketch to three-dimensional garment transfer process. Therefore, this research is concerned with fashion designers engaged in transferring a two-dimensional sketch through the method ‘sculptural form giving’. This research method applies the ideal model of conceptual sculpture, in the fashion design process, akin to those used in the disciplines of architecture. These parallel design disciplines share similar processes for realizing design ideas. Moreover, this research investigates and formalizes the processes that utilize the measurable space between the garment and the body, to help transfer garment variation and scale. In summation, this research proposition focuses on helping fashion designers to produce a creative method that helps the designer transfer their imaginative concept through intermediate modeling.

‘Crows’ vs. ‘Avatar’, or: 3D vs. total-dimensional immersion

3D film’s explicit new space depth arguably provides both an enhanced realistic quality to the image and a wealth of more acute visual and haptic sensations (a ‘montage of attractions’) to the increasingly involved spectator. But David Cronenberg’s related ironic remark that ‘cinema as such is from the outset a «special effect»’ should warn us against the geometrical naiveté of such assumptions, within a Cartesian ocularcentric tradition for long overcome by Merleau-Ponty’s embodiment of perception and Deleuze’s notion of the self-consistency of the artistic sensation and space. Indeed, ‘2D’ traditional cinema already provides the accomplished «fourth wall effect», enclosing the beholder behind his back within a space that no longer belongs to the screen (nor to ‘reality’) as such, and therefore is no longer ‘illusorily’ two-dimensional. This kind of totally absorbing, ‘dream-like’ space, metaphorical for both painting and cinema, is illustrated by the episode ‘Crows’ in Kurosawa’s Dreams. Such a space requires the actual effacement of the empirical status of spectator, screen and film as separate dimensions, and it is precisely the 3D caracteristic unfolding of merely frontal space layers (and film events) out of the screen towards us (and sometimes above the heads of the spectators before us) that reinstalls at the core of the film-viewing phenomenon a regressive struggle with reality and with different degrees of realism, originally overcome by film since the Lumière’s Arrival of a Train at Ciotat seminal demonstration. Through an analysis of crucial aspects in Avatar and the recent Cave of Forgotten Dreams, both dealing with historical and ontological deepening processes of ‘going inside’, we shall try to show how the formal and technically advanced component of those 3D-depth films impairs, on the contrary, their apparent conceptual purpose on the level of contents, and we will assume, drawing on Merleau-Ponty and Deleuze, that this technological mistake is due to a lack of recognition of the nature of perception and sensation in relation to space and human experience.