Densidades de plantio e cultivares de soja convencionais para a região Sul de MG, safra 2013/14.

Objetivou-se identificar a melhor população de plantas (100.000 a 400.000 plantas ha-1) para 3 cultivares de soja convencional (BRSMG 752S; BRSMG 772S; BRSMG 810C), visando semeadura para região Sul de Minas Gerais. A cv BRSMG 772S apresentou máxima produtividade quando conduzida com 284.000 plantas ha-1, podendo ser cultivada entre 200.000 a 400.000 plantas ha-1. A variação na população de plantas não alterou o rendimento e a maioria dos caracteres agronômicos para as cultivares BRSMG 752S e BRSMG 810C, podendo as mesmas serem utilizadas com ampla faixa de população.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Plan de exportaciones de Colpet ltda.

Este trabajo consta de cinco capítulos acerca de Colpet Ltda trata sobre el problema de contaminación del residuo sólido POLIETILENO TEREFTALATO (PET), material utilizado para la fabricación de envases.

Plan estratégico exportador de dientes artificiales hacia los Estados Unidos De América, Perú y Bolivia

Con la elaboración de esta investigación, se pretende mostrar todos y cada uno de los factores que inciden en el momento de ingresar un nuevo producto de origen colombiano en los mercados internacionales en este caso, aplicados a los dientes artificiales; también se dará un especial énfasis a todos los aspectos que rodean la creación de empresa en Colombia con fines a la exportación, esto con el fin de ilustrar las facilidades existentes para crear empresas de este tipo.

México y Chile como posibles canales de comercialización de las exportaciónes Colombianas menores y nuevas hacia el Japón

El trabajo muestra una nueva forma de incentivar el comercio con el Japón e involucra mecanismos poco conocidos para su desarrollo, a fin de poder promover a largo plazo las exportaciones colombianas menores y nuevas hacia este destino.

Efectos de la simpatectomía torácica sobre la pletismografía de los miembros superiores en sujetos con hiperhidrosis palmar

Introducción: La simpatectomía es el tratamiento de la hiperhidrosis palmar y consiste en denervación simpática de miembros superiores que produce un efecto en el flujo sanguíneo al impactar la respuesta vasoconstrictora. El cambio en el flujo sanguíneo se puede evaluar a través de la onda fotopletismográfica. Metodología: Se realizaron 2 sesiones (presimpatectomía y postsimpatectomía) de 10 minutos en cada miembro superior en 28 pacientes obteniendo 79 señales fotopletismográficas distribuidas así: 37 presimpatectomía y 42 señales postsimpatectomía. De cada señal se analizó 1.5 minutos donde se tienen 80 ondas de fotopletismografía y se miden 6 variables: 1. Componente AC (componente pulsátil), 2. Componente DC (componente no pulsátil), 3. Relación entre AC/DC (índice de perfusión), 4. Area bajo la curva (AUC), 5. Tiempo entre el inicio de la onda y pico sistólico (T_DA) y 6. Tiempo entre cada onda de pulso (T_DD). Resultados: Aumentó 120% el componente AC y disminuyó 78% en DC del miembro superior derecho (MSD) con 99% de confiabilidad (p<0.001) entre presimpatectomía (n=18) y postsimpatectomía (n=21). AC/DC aumentó 55% con 95% de confiabilidad entre presimpatectomía (n=19) y postsimpatectomía (n=21) en el miembro superior izquierdo (p<0.05). No se encontró diferencia para T_DA, T_DD ni AUC. Discusión y Conclusión: La simpatectomía en pacientes con hiperhidrosis palmar produce un cambio en el flujo sanguíneo de los miembros superiores evidenciado por los cambios en el componente no pulsátil (DC) y pulsátil (AC) que es secundario a la vasodilatación consecuencia del bloqueo simpático por la denervación quirúrgica de los ganglios simpáticos torácicos.

Influencia del bajo peso al nacer en el cumplimiento del esquema de vacunación en Colombia

INTRODUCCION. En Colombia y a nivel mundial la vacunación es una estrategia que ha reducido la mortalidad infantil, sin embargo existen bajas coberturas en algunas zonas del país, dentro de las causas de la no vacunación se encuentra el bajo peso al nacer, tema de gran importancia y poco estudiado, encontrándose como una causa controlable y que permitiría a la población acceder a la protección frente a enfermedades inmunoprevenibles. MATERIALES Y METODOS. Se realizó un estudio de tipo observacional de corte trasversal, la muestra fue tomada de la ENDS realizada por Profamilia en el año 2010, se tomó el número total de los encuestados que cumplían con los criterios de inclusión, en total fueron 9694 registros a los que se les realizo; análisis descriptivo, bivariado y multivariado. RESULTADOS. Los niños con bajo peso al nacer tienen menor probabilidad de estar vacunados con el esquema completo con respecto a los niños con peso normal, OR 0762 (IC 95% 0,650; 0,895), se observó que las vacunas en forma individual tienen un comportamiento similar al esquema completo, específicamente en la aplicación en el tiempo indicado para su aplicación, exceptuando triple viral donde no se encontró asociación. CONCLUSION. El bajo peso es un factor determinante en la vacunación a tiempo de los menores y del cumplimiento posterior del esquema, se encontraron variables asociadas al no cumplimiento como el lugar del parto, el índice de pobreza y pertenecer a la etnia afrodescendiente.

Profundización, apertura y cierre de mercados de exportación a nivel sectorial en Colombia : una estimación de los márgenes del comercio y su relación con el ciclo económico

En este trabajo se explora, desde el punto de vista empírico, el comportamiento de la profundización, apertura y cierre de mercados de exportación a nivel sectorial para Colombia durante el periodo 1997- 2010, con énfasis en los dos periodos de recesión que presenta la economía durante el mismo. Para ello se emplea una metodología de descomposición de los cambios registrados por el comercio, en sus márgenes intensivo y extensivo, que permite la identificación de estos fenómenos y su observación tanto a lo largo del tiempo como a nivel transversal. Los resultados indican que, en el corto plazo, el margen intensivo del comercio explica la mayor parte de las variaciones en las exportaciones, en tanto que en el mediano plazo se encuentra una importante contribución del margen extensivo a éstas. Adicionalmente, desde el punto de vista sectorial, la crisis de 1997-1999 no presenta un patrón homogéneo en términos del comportamiento de los márgenes del comercio, en tanto que la de 2008- 2009 se caracteriza por presentar un patrón más homogéneo a través de los distintos sectores de la actividad económica.

Trade diversification in Colombia, 1991-2011

We describe the evolution of international trade and the behavior of export diversification in Colombia during the period 1991-2011. For measuring trade diversification and following up its behavior along the period, we employ alternative ways of decomposing trade flows along its intensive and extensive margins, using the latter as a measure of diversification. Results indicate that, in the short run, trade diversification in Colombia can be characterized as weak but that there is a modest trend for an increase in its importance. With some differences in degree, for both exports and imports, the number of partner countries increases faster than the number of products contained in the average basket traded and, simultaneously, the number of traded products increases faster than the average number of countries with which they are traded. Hence, trade diversification in Colombia seems to follow a pattern that implies that trade with new partners tends to be relatively slowly populated in terms of products or, from the opposite point of view, trade of new products is relatively sluggish in extending to new partner countries

Information externalities and export trade duration at the firm level

Recent empirical work emphasizes the importance of the extensive margin of trade (new exporters, new export activities) for long run export growth. In this context, understanding the determinants of duration of new exporters is key for underpinning the dynamics of exports growth. As new exporters tend to show low survival rates, identifying the determinants of export duration is highly relevant for academic and policy purposes. In this paper, we explore whether information externalities arising from different levels of spatial interaction allow new exporters to increase the duration of their trade activities. For this, we use transaction level data on Colombian exports between 2004 and 2011. Results show that export networks, understood as the agglomeration of exporting firms at different spatial levels, reduce the risk of dropping out from exporting and that this effect is stronger the more similar are export activities carried out by firms