Plant leaf wax (n-alkane) data from sediment core MD96-2048

In this study we investigate Pleistocene vegetation and climate change in southern East Africa by examining plant leaf waxes in a marine sediment core that receives terrestrial runoff from the Limpopo River. The plant leaf wax records are compared to a multi-proxy sea surface temperature (SST) record and pollen assemblage data from the same site. We find that Indian Ocean SST variability, driven by high-latitude obliquity, exerted a strong control on the vegetation of southern East Africa during the past 800,000 yr. Interglacial periods were characterized by relatively wetter and warmer conditions, increased contributions of C3 vegetation, and higher SST, whereas glacial periods were marked by cooler and arid conditions, increased contributions of C4 vegetation, and lower SST. We find that Marine Isotope Stages (MIS) 5e, 11c, 15e and 7a-7c are strongly expressed in the plant leaf wax records but MIS 7e is absent while MIS 9 is rather weak. Our plant leaf wax records also record the climate transition associated with the Mid-Brunhes Event (MBE) suggesting that the pre-MBE interval (430-800 ka) was characterized by higher inputs from grasses in comparison to relatively higher inputs from trees in the post-MBE interval (430 to 0 ka). Differences in vegetation and SST of southern East Africa between the pre- and post-MBE intervals appear to be related to shifts in the location of the Subtropical Front. Comparison with vegetation records from tropical East Africa indicates that the vegetation of southern East Africa, while exhibiting glacial-interglacial variability and notable differences between the pre- and post-MBE portions of the record, likely did not experience such dramatic extremes as occurred to the north at Lake Malawi.

Pollen distribution of sediment core MD96-2048 from the Western Indian Ocean

Glacial-interglacial fluctuations in the vegetation of South Africa might elucidate the climate system at the edge of the tropics between the Indian and Atlantic Oceans. However, vegetation records covering a full glacial cycle have only been published from the eastern South Atlantic. We present a pollen record of the marine core MD96-2048 retrieved by the Marion Dufresne from the Indian Ocean ~120 km south of the Limpopo River mouth. The sedimentation at the site is slow and continuous. The upper 6 m (spanning the past 342 Ka) have been analysed for pollen and spores at millennial resolution. The terrestrial pollen assemblages indicate that during interglacials, the vegetation of eastern South Africa and southern Mozambique largely consisted of evergreen and deciduous forests. During glacials open mountainous scrubland dominated. Montane forest with Podocarpus extended during humid periods was favoured by strong local insolation. Correlation with the sea surface temperature record of the same core indicates that the extension of mountainous scrubland primarily depends on sea surface temperatures of the Agulhas Current. Our record corroborates terrestrial evidence of the extension of open mountainous scrubland (including fynbos-like species of the high-altitude Grassland biome) for the last glacial as well as for other glacial periods of the past 300 Ka.

Lianas da estação ecológica do Noroeste Paulista, São José do Rio Preto/Mirassol, SP, Brasil

Lianas are characteristic, abundant and ecologically important members of tropical forest but they have been neglected in floristics and phytossociological studies. This work presents a floristic survey of the lianas species at Estação Ecológica do Noroeste Paulista (EENP), and a comparison of the list of species recorded in this work with those reported for other fragments of São Paulo state. The EENP (20º48'36'' S and 49º22'50'' W) is at 468 m of altitude and comprises an area of 168,43 ha, divided into three fragments of vegetation. Samples of lianas were collected in the interior and along the edges of the forest fragments. It was identified 105 species: 99 Magnoliopsida (60 genera and 22 families); six Liliopsida (three genera and three families). The richest families in species comprised 59% of the total of lianas sampled. The dendrogram of similarity showed a low similarity between the forest situated in the littoral (Atlantic Forest) and those located in the interior of the state of São Paulo. Some other authors, also analysing the similarity of forest of the interior and Atlantic Forest of São Paulo state, but considering only the trees reported similar result.

Anticorpos anti-rickettsias do grupo da febre maculosa em equídeos e caninos no norte do Estado do Paraná, Brasil

The Brazilian Spotted Fever (BSF) is a zoonosis that can be fatal if not trteated. As there are few studies of the BSF in the Paraná State, the occurrence of BSF was serologically investigated in dogs and horses by indirect immunofluorescence assay (IFA), in the North of that State, in animals that are regarded as sentinels for BSF. A total of 241 samples of sera of equine, four of asinine, and 29 of dogs were collected in nine farms of three municipalities in the North of Paraná: Arapongas, Douradina, and Umuarama. From fifteen samples of equine serum with positive titres for RIFI, eight (53.3 %) had titre of 64 against R. rickettsii, two (13.3 %) 128 against R. rickettsii, and five (33.3 %) were reactants for R. parkeri and R. rickettsii, with titres ranging from 64 to 2048, and 128 to 1024, respectively. The results showed that domestic animals, sentinels for BSF, are under low exposition to ticks infected with spotted fever group Rickettsia, indicating low risk of human infection by these agents in the studied area.

Heat treatment influence on the superconducting properties of nanometric-scale Nb(3)Sn wires with Cu-Sn artificial pinning centers

Since the discovery of Nb(3)Sn superconductors many efforts have been expended to improve the transport properties in these materials. In this work, the heat treatment profiles for Nb(3)Sn superconductor wires with Cu(Sn) artificial pinning centers (APCs) with nanometric-scale sizes were analyzed in an attempt to improve the critical current densities and upper critical magnetic field. The methodology to optimize the heat treatment profiles in respect to the diffusion, reaction and formation of the superconducting phases is described. Microstructural characterization, transport and magnetic measurements were performed in an attempt to relate the microstructure to the pinning mechanisms acting in the samples. It was concluded that the maximum current densities occur due to normal phases (APCs) that act as the main pinning centers in the global behavior of the Nb(3)Sn superconducting wire. The APC technique was shown to be very powerful because it permitted mixing of the pinning mechanism. This achievement was not possible in other studies in Nb(3)Sn wires reported up to now.

Superconductivity in Th(3)Ni(5)C(5)

The existence of a new metallic carbide of composition Th(3)Ni(5)C(5) was reported in the literature in 1991. This compound is a new orthorhombic prototype structure. In this work we report a reinvestigation of the synthesis of this material and we find that the Th(3)Ni(5)C(5) compound is a new bulk superconducting material. Despite the high concentration of Ni in this compound, we find bulk superconductivity with superconducting critical temperature of T(c) = 5.0 K and an upper critical field of mu(o)H(c2) = 5.8 T. Details of the superconducting state with specific heat, magnetization, and resistivity measurements are discussed.

Preparation and characterization of D, L-PLA loaded 17-beta-Estradiol valerate by emulsion/evaporation methods

PLA microparticles containing 17-beta-estradiol valerate were prepared by an emulsion/evaporation method in order to sustain drug release. This system was characterized concerning particle size, particle morphology and the influence of formulation and processing parameters on drug encapsulation and in vitro drug release. The biodegradation of the microparticles was observed by tissue histological analysis. Scanning electron microscopy and particle size analysis showed that the microparticles were spherical, presenting non-aggregated homogeneous surface and had diameters in the range of 718-880 nm (inert microparticles) and 3-4 mu m (drug loaded microparticles). The encapsulation efficiency was similar to 80%. Hormone released from microparticles was sustained. An in vivo degradation experiment confirmed that microparticles are biodegradable. The preparation method was shown to be suitable, since the morphological characteristics and efficiency yield were satisfactory. Thus, the method of developed microparticles seems to be a promising system for sustained release of 17-beta-estradiol.

Preparation and characterization of chitosan-treated alginate microparticles incorporating all-trans retinoic acid

Chitosan treated alginate microparticles were prepared with the purpose of incorporating all-trans retinoic acid (ATRA) using an inexpensive, simple and fast method, enhancing dermal localization and sustaining the release of ATRA into the skin. Microparticles characterization, drug-polymer interaction, release profile and in vitro skin retention were investigated. Microparticles presented spherical shape and drug loading capacity of 47%. The drug content of these microparticles was affected by ATRA concentration and by the solvent used and it was more weakly affected by chitosan concentration. The release of ATRA was also affected by chitosan concentration. Microparticles prepared with 0.4% chitosan (w/w) resulted in drug release with a more sustained profile. The results of in vitro retention studies showed that chitosan treated alginate microparticles decreased the drug retention in the stratum corneum (SC), where occur the skin irritation, but maintained the ATRA concentration in the deeper skin layers, where occur the pathologies treated with ATRA. Then, the microparticles developed in this work can be a good candidate to improve the topical therapy with retinoid.

Chitosan microparticles for sustaining the topical delivery of minoxidil sulphate

Given the hypothesis that microparticles can penetrate the skin barrier along the transfollicular route, this work aimed to obtain and characterise chitosan microparticles loaded with minoxidil sulphate (MXS) and to study their ability to sustain the release of the drug, attempting a further application utilising them in a targeted delivery system for the topical treatment of alopecia. Chitosan microparticles, containing different proportions of MXS/polymer, were prepared by spray drying and were characterised by yield, encapsulation efficiency, size and morphology. Microparticles selected for further studies showed high encapsulation efficiency (similar to 82%), a mean diameter of 3.0 mu m and a spherical morphology without porosities. When suspended in an ethanol/water solution, chitosan microparticles underwent instantaneous swelling, increasing their mean diameter by 90%. Release studies revealed that the chitosan microparticles were able to sustain about three times the release rate of MXS. This feature, combined with suitable size, confers to these microparticles the potential to target and improve topical therapy of alopecia with minoxidil.