975 resultados para Águas de produção


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The production of petroleum is frequently accomplished with great volumes of water, that it is carried of the underground with the oil. It is a challenge of the present century the development of technologies that allow the use of waste water for purposes that consume great amounts of water and don't demand as rigid as the one of the drinking water requirements. The solar distillation has been configuring as an alternative of clean technology for desalination of brine and saline. Besides causing the minimum possible damage to the environment, it takes advantage of an abundant and free energy source: the solar energy. That study aims to develop a Solar Distillator for treatment of the produced water of the oil wells, to obtain an efluent to use in agriculture and vapor generation. The methodology for collection, conservation and analysis of the physical-chemical parameters obeyed the norms in APHA (1995). The sampling was of the composed type. Experiments were accomplished in the solar distillation pilot and simulation in thermostatic bathing. The operation was in batch system and for periods of 4, 6 and 12 h. The developed Distillator is of the type simple effect of two waters. It was still tested two inclination angles for covering; 20º and 45º. The Distillator presented minimum of 2,85 L/m2d revenues and maximum of 7,14 L/m2d. The removals of salts were great than 98%. The removal of TOC in the simulation was great than 90%. In agreement with the data of energy and mass balance, it was verified that the developed solar Distillator presented compatible revenues with those found in literature for similar types. It can be inferred that the obtained distilled water assists to the requirements CONAMA in almost all the points and could be used for irrigation of cultures such as cotton and mamona. As the distilled water has characteristics of fresh water it can be used in the generation of vapor

Relevância:

70.00% 70.00%

Publicador:

Resumo:

A presente tese de doutorado teve como objetivo estabelecer parâmetros para avaliar a viabilidade do reúso agrícola de águas oleosas da indústria de petróleo, como as águas de produção (AP) de campos de exploração onshore do semiárido nordestino, na irrigação de culturas de girassol destinadas à produção de biodiesel. A AP foi produzida sinteticamente e tratada utilizando-se as técnicas de eletrofloculação (EF) e de osmose inversa (OI). Foram analisados os efeitos da AP não tratada, tratada por EF e por EF combinada com osmose inversa (EF+OI) na germinação, desenvolvimento e produção de biomassa de plântulas de girassol e também nos atributos de um solo característico do semiárido nordestino. Na melhor condição operacional do tratamento da AP por EF (28,6 A m-2 durante 4 min.) foram obtidas eficiências de remoção de óleos e graxas (O&G), demanda química de oxigênio (DQO), cor e turbidez superiores a 95%. O tratamento EF+OI promoveu a remoção do excesso de salinidade e de ferro oriundo da etapa de EF, enquadrando-se esses parâmetros dentro de níveis de referência recomendados para água de irrigação. Níveis de O&G e DQO superiores, respectivamente, a 337 mg L-1 e 1.321 mg O2 L-1 na AP bruta produziram efeitos tóxicos, reduzindo-se o índice de velocidade de germinação (IVG) e o percentual de plântulas normais do girassol. Por outro lado, os efluentes tratados por EF e EF+OI produziram efeitos similares no percentual de sementes germinadas, no IVG, no percentual de plântulas normais e na produção de biomassa do girassol. O uso da AP tratada por EF, com ou sem diluição, contribuiu significativamente para o aumento da salinidade e dos teores de sódio do solo, diferentemente da tratada por EF+OI, que produziu efeitos similares ao do controle (água destilada)

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Over exploitation of oil deposits on land onshore or offshore, there is simultaneous generation of waste water, known as produced water, which represents the largest waste stream in the production of crude oil. The relationship between the chemical composition of oil and water production and the conditions in which this process occurs or is favored are still poorly studied. The area chosen for the study has an important oil reserve and an important aquifer saturated with freshwater meteoric. The aim of this work is to study some chemical parameters in water produced for each reservoir zone of production in mature oil fields of Açu Formation, using the hydrochemical and statistical analysis to serve as a reference and be used as tools against the indicator ranges water producers in oil producing wells. Samples were collected from different wells in 6 different areas of production and were measured 50 parameters, which can be classified into three groups: anions, cations and physicochemical properties (considering only the parameters that generated values above detection limits in all samples). Through the characterization hydrochemistry observed an area of water and chlorinated sodium, chlorinated calcium or magnesium (mixed) in well water in different areas of Açu, by applying a statistical treatment, we obtained a discriminant function that distinguishes chemically production areas. Thus, it was possible to calculate the rate of correct classification of the function was 76.3%. To validate this model the accuracy rate was 86%

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Photo-oxidation processes of toxic organic compounds have been widely studied. This work seeks the application of the photo-Fenton process for the degradation of hydrocarbons in water. The gasoline found in the refinery, without additives and alcohol, was used as the model pollutant. The effects of the concentration of the following substances have been properly evaluated: hydrogen peroxide (100-200 mM), iron ions (0.5-1 mM) and sodium chloride (200 2000 ppm). The experiments were accomplished in reactor with UV lamp and in a falling film solar reactor. The photo-oxidation process was monitored by measurements of the absorption spectra, total organic carbon (TOC) and chemical oxygen demand (COD). Experimental results demonstrated that the photo-Fenton process is feasible for the treatment of wastewaters containing aliphatic hydrocarbons, inclusive in the presence of salts. These conditions are similar to the water produced by the petroleum fields, generated in the extraction and production of petroleum. A neural network model of process correlated well the observed data for the photooxidation process of hydrocarbons

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Relevância:

40.00% 40.00%

Publicador:

Resumo:

A publicação exploração e produção de petróleo em águas ultraprofundas : nova fronteira para o pós-crise, trata da formação da nova oferta de petróleo e gás natural, que incluirá os recursos recém-descobertos em jazidas localizadas em águas ultraprofundas, no Brasil e no Golfo do México, e o petróleo a ser extraído das areias asfálticas do Canadá. O texto considera também a situação atual da demanda e da oferta internacional de petróleo, as características do petróleo produzido no Brasil e a modernização de seu sistema de refino.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The efficacy of the first ovulation of the breeding season was determined through the response of first pre-ovulatory follicle of the breeding season to hCG, embryo recovery rate, viability of recovered embryos, serum concentrations of progesterone, and response of first CL to PGF 2α. Thirteenth mares that were in vernal transition were accompanied until the first pre-ovulatory follicle was detected. At this moment, the ovulation was induced with 2,500 IU hCG (IV) and the mares were inseminated every other day until ovulation. Seven days after the ovulation, embryo recovery was performed and the progesterone concentration was determined. After detection of the first pre-ovulatory follicle of breeding season with ≥ 25mm, it took 14.92 ± 10.80 days for the follicle to reach the preovulatory size and 18.00 ± 11.08 days to ovulation. After administration of hCG, 11/13 mares ovulated in 48 hours. These follicles growth 2.19 ± 0.86 mm/day on average. Nine of 13 mares (69.2%) produced embryos and all were considered viable after morfological evaluation and fluorescence exams. The CL appeared competent producing 7.39 ± 2.11 ng/ml P 4 on average, and responding to PGF 2α. According to these results the first ovulatory cycle of the year can be utilized to produce viable embryos.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)