Multispectral image compression using the wavelet transform

Multispectral images contain information from several spectral wavelengths and currently multispectral images are widely used in remote sensing and they are becoming more common in the field of computer vision and in industrial applications. Typically, one multispectral image in remote sensing may occupy hundreds of megabytes of disk space and several this kind of images may be received from a single measurement. This study considers the compression of multispectral images. The lossy compression is based on the wavelet transform and we compare the suitability of different waveletfilters for the compression. A method for selecting a wavelet filter for the compression and reconstruction of multispectral images is developed. The performance of the multidimensional wavelet transform based compression is compared to other compression methods like PCA, ICA, SPIHT, and DCT/JPEG. The quality of the compression and reconstruction is measured by quantitative measures like signal-to-noise ratio. In addition, we have developed a qualitative measure, which combines the information from the spatial and spectral dimensions of a multispectral image and which also accounts for the visual quality of the bands from the multispectral images.

Modeling of non-isothermalvapor membrane separation with thermodynamic models and generalized mass transfer equations

A rigorous unit operation model is developed for vapor membrane separation. The new model is able to describe temperature, pressure, and concentration dependent permeation as wellreal fluid effects in vapor and gas separation with hydrocarbon selective rubbery polymeric membranes. The permeation through the membrane is described by a separate treatment of sorption and diffusion within the membrane. The chemical engineering thermodynamics is used to describe the equilibrium sorption of vapors and gases in rubbery membranes with equation of state models for polymeric systems. Also a new modification of the UNIFAC model is proposed for this purpose. Various thermodynamic models are extensively compared in order to verify the models' ability to predict and correlate experimental vapor-liquid equilibrium data. The penetrant transport through the selective layer of the membrane is described with the generalized Maxwell-Stefan equations, which are able to account for thebulk flux contribution as well as the diffusive coupling effect. A method is described to compute and correlate binary penetrant¿membrane diffusion coefficients from the experimental permeability coefficients at different temperatures and pressures. A fluid flow model for spiral-wound modules is derived from the conservation equation of mass, momentum, and energy. The conservation equations are presented in a discretized form by using the control volume approach. A combination of the permeation model and the fluid flow model yields the desired rigorous model for vapor membrane separation. The model is implemented into an inhouse process simulator and so vapor membrane separation may be evaluated as an integralpart of a process flowsheet.

Organisaatiokenttä vai paikallisyhteisö: OP-ryhmän strategiat institutionaalisten ja kilpailullisten paineiden ristitulessa

Tässä johtaminen ja organisaatiot -oppialaan kuuluvassa väitöstutkimuksessa selvitetään, miten asiakasomisteisten osuuskuntien johtajat sekä hallintohenkilöt vastaavat organisaatioidensa kohtaamiin institutionaalisiin ja kilpailullisiin paineisiin sekä kuinka he pyrkivät vaikuttamaan organisaatiokenttänsä instituutioihin yritystensä kilpailuaseman parantamiseksi pankkisektorilla. Asiakasomisteisten osuuskuntien päätöksentekoa tarkastellaan kolmen kriittisen tapauksen kautta. Tapauksia analysoidaan hyödyntäen institutionaalista organisaatioteoriaa. Kyseisen teoriapohjan soveltaminen strategisen päätöksenteon tutkimiseksi antaa mahdollisuuden tarkastella asiakasomisteisten osuuskuntien eri toimijoiden ja instituutioiden välistä dialogia aiempaa laajemmin. Pitkittäisaineisto (v. 1939 - 2005) koostuu kaikkiaan 57 haastattelusta sekä laaja-alaisesta historiallisesta arkistomateriaalista. Työn keskeinen kontribuutio on asiakasomisteisten osuuskuntien päätöksenteon kytkeminen institutionaaliseen organisaatioteoriaan, erityisesti legitimiteettiin sekä instituutioihin vaikuttamiseen liittyviin kysymyksiin. Työssä esitetään väite, jonka mukaan pankkisektorilla ryhmänä toimiva asiakasomisteinen osuuskunta hakee legitimiteettiä organisaatiokentän lisäksi paikallisyhteisöstä, mikä tuottaa jännitteen liiketoiminnan harjoittamiseen sekä strategiseen johtamiseen.

Isentropic Exergy and Pressure of the Shock Wave Caused by the Explosion of a Pressure Vessel

An accidental burst of a pressure vessel is an uncontrollable and explosion-like batch process. In this study it is called an explosion. The destructive effectof a pressure vessel explosion is relative to the amount of energy released in it. However, in the field of pressure vessel safety, a mutual understanding concerning the definition of explosion energy has not yet been achieved. In this study the definition of isentropic exergy is presented. Isentropic exergy is the greatest possible destructive energy which can be obtained from a pressure vessel explosion when its state changes in an isentropic way from the initial to the final state. Finally, after the change process, the gas has similar pressure and flow velocity as the environment. Isentropic exergy differs from common exergy inthat the process is assumed to be isentropic and the final gas temperature usually differs from the ambient temperature. The explosion process is so fast that there is no time for the significant heat exchange needed for the common exergy.Therefore an explosion is better characterized by isentropic exergy. Isentropicexergy is a characteristic of a pressure vessel and it is simple to calculate. Isentropic exergy can be defined also for any thermodynamic system, such as the shock wave system developing around an exploding pressure vessel. At the beginning of the explosion process the shock wave system has the same isentropic exergyas the pressure vessel. When the system expands to the environment, its isentropic exergy decreases because of the increase of entropy in the shock wave. The shock wave system contains the pressure vessel gas and a growing amount of ambient gas. The destructive effect of the shock wave on the ambient structures decreases when its distance from the starting point increases. This arises firstly from the fact that the shock wave system is distributed to a larger space. Secondly, the increase of entropy in the shock waves reduces the amount of isentropic exergy. Equations concerning the change of isentropic exergy in shock waves are derived. By means of isentropic exergy and the known flow theories, equations illustrating the pressure of the shock wave as a function of distance are derived. Amethod is proposed as an application of the equations. The method is applicablefor all shapes of pressure vessels in general use, such as spheres, cylinders and tubes. The results of this method are compared to measurements made by various researchers and to accident reports on pressure vessel explosions. The test measurements are found to be analogous with the proposed method and the findings in the accident reports are not controversial to it.

The effects of productivity on profitability: a case study at firm level using an activity-based costing approach

Productivity and profitability are important concepts and measures describing the performance and success of a firm. We know that increase in productivity decreases the costs per unit produced and leads to better profitability. This common knowledge is not, however, enough in the modern business environment. Productivity improvement is one means among others for increasing the profitability of actions. There are many means to increase productivity. The use of these means presupposes operative decisions and these decisions presuppose informationabout the effects of these means. Productivity improvement actions are in general made at floor level with machines, cells, activities and human beings. Profitability is most meaningful at the level of the whole firm. It has been very difficult or even impossible to analyze closely enough the economical aspects of thechanges at floor level with the traditional costing systems. New ideas in accounting have only recently brought in elements which make it possible to considerthese phenomena where they actually happen. The aim of this study is to supportthe selection of objects to productivity improvement, and to develop a method to analyze the effects of the productivity change in an activity on the profitability of a firm. A framework for systemizing the economical management of productivity improvement is developed in this study. This framework is a systematical way with two stages to analyze the effects of productivity improvement actions inan activity on the profitability of a firm. At the first stage of the framework, a simple selection method which is based on the worth, possibility and the necessity of the improvement actions in each activity is presented. This method is called Urgency Analysis. In the second stage it is analyzed how much a certain change of productivity in an activity affects the profitability of a firm. A theoretical calculation model with which it is possible to analyze the effects of a productivity improvement in monetary values is presented. On the basis of this theoretical model a tool is made for the analysis at the firm level. The usefulness of this framework was empirically tested with the data of the profit center of one medium size Finnish firm which operates in metal industry. It is expressedthat the framework provides valuable information about the economical effects of productivity improvement for supporting the management in their decision making.

Cardiovascular effects of short term exposure to electric and magnetic fields of electricity power transmission

In the electrical industry the 50 Hz electric and magnetic fields are often higher than in the average working environment. The electric and magnetic fields can be studied by measuring or by calculatingthe fields in the environment. For example, the electric field under a 400 kV power line is 1 to 10 kV/m, and the magnetic flux density is 1 to 15 µT. Electricand magnetic fields of a power line induce a weak electric field and electric currents in the exposed body. The average current density in a human being standing under a 400 kV line is 1 to 2 mA/m2. The aim of this study is to find out thepossible effects of short term exposure to electric and magnetic fields of electricity power transmission on workers' health, in particular the cardiovascular effects. The study consists of two parts; Experiment I: influence on extrasystoles, and Experiment II: influence on heart rate. In Experiment I two groups, 26 voluntary men (Group 1) and 27 transmission-line workers (Group 2), were measured. Their electrocardiogram (ECG) was recorded with an ambulatory recorder both in and outside the field. In Group 1 the fields were 1.7 to 4.9 kV/m and 1.1 to 7.1 pT; in Group 2 they were 0.1 to 10.2 kV/m and 1.0 to 15.4 pT. In the ECG analysis the only significant observation was a decrease in the heart rate after field exposure (Group 1). The drop cannot be explained with the first measuring method. Therefore Experiment II was carried out. In Experiment II two groups were used; Group 1 (26 male volunteers) were measured in real field exposure, Group 2 (15 male volunteers) in "sham" fields. The subjects of Group 1 spent 1 h outside the field, then 1 h in the field under a 400 kV transmission line, and then again 1 h outside the field. Under the 400 kV linethe field strength varied from 3.5 to 4.3 kV/m, and from 1.4 to 6.6 pT. Group 2spent the entire test period (3 h) in a 33 kV outdoor testing station in a "sham" field. ECG, blood pressure, and electroencephalogram (EEG) were measured by ambulatory methods. Before and after the field exposure, the subjects performed some cardiovascular autonomic function tests. The analysis of the results (Experiments I and II) showed that extrasystoles or arrythmias were as frequent in the field (below 4 kV/m and 4 pT) as outside it. In Experiment II there was no decrease detected in the heart rate, and the systolic and diastolic blood pressure stayed nearly the same. No health effects were found in this study.

On the differential evolution algorithm and its appliation to training radial basis function networks

The parameter setting of a differential evolution algorithm must meet several requirements: efficiency, effectiveness, and reliability. Problems vary. The solution of a particular problem can be represented in different ways. An algorithm most efficient in dealing with a particular representation may be less efficient in dealing with other representations. The development of differential evolution-based methods contributes substantially to research on evolutionary computing and global optimization in general. The objective of this study is to investigatethe differential evolution algorithm, the intelligent adjustment of its controlparameters, and its application. In the thesis, the differential evolution algorithm is first examined using different parameter settings and test functions. Fuzzy control is then employed to make control parameters adaptive based on an optimization process and expert knowledge. The developed algorithms are applied to training radial basis function networks for function approximation with possible variables including centers, widths, and weights of basis functions and both having control parameters kept fixed and adjusted by fuzzy controller. After the influence of control variables on the performance of the differential evolution algorithm was explored, an adaptive version of the differential evolution algorithm was developed and the differential evolution-based radial basis function network training approaches were proposed. Experimental results showed that the performance of the differential evolution algorithm is sensitive to parameter setting, and the best setting was found to be problem dependent. The fuzzy adaptive differential evolution algorithm releases the user load of parameter setting and performs better than those using all fixedparameters. Differential evolution-based approaches are effective for training Gaussian radial basis function networks.

Vaarinpidosta virtuaaliaikaan : Sata vuotta suomalaista tilintarkastusta

Tämän tutkimuksen aiheena on tilintarkastuksen historiallinen kehittyminen Suomessa runsaan sadan vuoden aikana. Tutkimuksen tavoitteena on analysoida osakeyhtiön tilintarkastuksen kehitystä ja yhdistää vuosisadan kehityspiirteet tilintarkastuksen kokonaiskuvaksi. Tutkittava periodi alkaa 1800-luvun lopulta ja päättyy 2000-luvun taitteeseen. Tutkimuksessa tarkastellaan suomalaista tilintarkastusinstituutiota, joka jaetaan kolmeen osaan: tilintarkastusta säätelevään normistoon (normit), tilintarkastajajärjestelmään (toimijat) ja tilintarkastuksen sisältöön (tehtävät). Tutkimuksessa tavoitellaan vastauksia kysymyksiin: mitä tarkastettiin, milloin tarkastettiin, kuka tarkasti ja miten tarkastettiin eri aikakausina? Tutkimus perustuu historialliseen lähdeaineistoon, jonka muodostavat tutkimusajanjakson lainsäädäntö, lainvalmisteluasiakirjat, viranomaisten ohjeet ja päätökset, alan järjestöjen suositukset, ammattilehtien artikkelit sekä laskentatoimen ja tilintarkastuksen ammattikirjallisuus. Metodologisesti tutkimus on teoreettinen, kvalitatiivinen historiantutkimus, jossa lähdeaineistoa käsitellään lähdekriittisesti ja osittain sisältöanalyysin keinoin. Tilintarkastusta säätelevässä normistossa keskeisiä lakeja ovat olleet osakeyhtiölaki, kirjanpitolaki ja tilintarkastuslaki. Lakisääteinen tilintarkastus alkoi vuoden 1895 osakeyhtiölaista, joka uudistui vuonna 1978 ja jälleen vuonna 1997. Kirjanpitolainsäädäntö on uudistunut viidesti: 1925 ja 1928, 1945, 1973, 1993 sekä 1997. Vuoden 1994 tilintarkastuslakiin koottiin tilintarkastuksen säädökset useista laeista. Muita normistoja ovat olleet EY:n direktiivit, Kilan ohjeet, KHT-yhdistyksen suositukset, Keskuskauppakamarin säännökset ja viimeisimpinä IAS- ja ISA-standardit. Ammattimainen tilintarkastajajärjestelmä saatiin maahamme kauppiaskokousten ansiosta. Ammattimaisena tilintarkastuksen toimijana aloitti Suomen Tilintarkastajainyhdistys vuonna 1911, ja sen toimintaa jatkoi KHT-yhdistys vuodesta 1925 alkaen. Tilintarkastajien auktorisointi siirtyi Keskuskauppakamarille vuonna 1924. HTM-tilintarkastajat ovat olleet alalla vuodesta 1950 lähtien. Kauppakamarijärjestö on toiminut hyväksyttyjen tilintarkastajien valvojana koko ammattimaisen tilintarkastustoiminnan ajan. Valtion valvontaa suorittaa VALA (Valtion tilintarkastuslautakunta). Koko tutkittavan periodin ajan auktorisoitujen tilintarkastajien rinnalla osakeyhtiöiden tarkastajina ovat toimineet myös maallikot.Tilintarkastuksen tehtäviin kuului vuoden 1895 osakeyhtiölain mukaan hallinnon ja tilien tarkastus. Myöhemmin sisältö täsmentyi tilinpäätöksen, kirjanpidon ja hallinnon tarkastukseksi. Tutkimusajanjakson alussa tilintarkastus oli manuaalista kaikkien tositteiden prikkausta ja virheiden etsimistä. Myöhemmin tarkastus muuttui pistokokeiksi. Kertatarkastuksesta siirryttiin jatkuvaan valvontatarkastukseen 1900-luvun alkupuolella. Dokumentoinnista ja työpapereista alkaa olla havaintoja 1930-luvulta lähtien. Atk-tarkastus yleistyi 1970- ja 1980-luvuilla, jolloin myös riskianalyyseihin alettiin kiinnittää huomiota. Hallinnon tarkastuksen merkitys on kasvanut kaiken aikaa. Tilintarkastuskertomukset olivat tutkimusajanjakson alussa vapaamuotoisia ja sisällöltään ilmaisurikkaita ja kuvailevia. Kertomus muuttui julkiseksi vuoden 1978 osakeyhtiölain myötä. Myöhemmin KHT-yhdistyksen vakiokertomusmallit yhdenmukaistivat ja pelkistivät raportointia. Tutkimuksen perusteella tilintarkastuksen historia voidaan jakaa kolmeen kauteen, jotka ovat tilintarkastusinstituution rakentumisen kausi (1895 - 1950), vakiintumisen kausi (1951 - 1985) ja kansainvälistymisen ja julkisuuden kausi (1986 alkaen). Tutkimusajanjakson jokaisella vuosikymmenellä keskusteltiin jatkuvasti tilintarkastajien riittävyydestä, alalle pääsyn ja tutkintojen vaikeudesta, tilintarkastajien ammattitaidon tasosta,hallinnon tarkastuksen sisällöstä, tilintarkastuskertomuksesta sekä maallikkotarkastajien asemasta. 1990-luvun keskeisimmät keskusteluaiheet olivat konsultointi, riippumattomuus, odotuskuilu sekä tilintarkastuksen taso ja laadunvalvonta. Analysoitaessa tilintarkastuksen muutoksia runsaan sadan vuoden ajalta voidaan todeta, että tilintarkastuksen ydintehtävät eivät juurikaan ole muuttuneet vuosikymmenien kuluessa. Osakeyhtiön tilintarkastus on edelleenkin laillisuustarkastusta. Sen tarkoituksena on yhä kirjanpidon, tilinpäätöksen ja hallinnon tarkastus. Tilintarkastajat valvovat osakkeenomistajien etua ja raportoivat heille tarkastuksen tuloksista. Tilintarkastuksen ulkoinen maailma sen sijaan on muuttunut vuosikymmenten saatossa. Kansainvälistyminen on lisännyt säännösten määrää, odotuksia ja vaatimuksia on nykyisin enemmän, uusi tekniikka mahdollistaa nopean tiedonkulun ja valvonta on lisääntynyt nykypäivää kohti tultaessa. Tilintarkastajan pätevyys perustuu nykyään tietotekniikan, tietojärjestelmien ja yrityksen toimialantuntemukseen. Runsaan sadan vuoden takaisen lain vaarinpitovaatimuksesta on tultu virtuaaliaikaiseen maailmaan!

Fouling, prevention of fouling, and clearing in filtration

In this thesis fouling of conventional filter fabrics and membranes was studied. In the beginning of the thesis fouling and how it can be measured and predicted is reviewed. Information on different methods on how fouling canbe decreased or cleaned away is also given. The experimental part is divided into two sections; fabric filtration and membrane filtration. Fouling of the filter fabrics was studied with silica or cupper slurries and fouling of the membranes was studied with pulp and paper mill waters. The fouled filter materials were characterised according to many different methods. The most useful way to observe fouling is to measure the changes in the permeate flux. Fouling can also be seen visually e.g. with scanning electron microscopy. Consequently, also the reason for the fouling in question might be found. Different filtration characteristics affect fouling e.g. as the filtration pressure was increased it did not have much influence on the permeate flux, but the pressure caused the membrane to get fouled faster. Also, an increase of shear rate on the membrane surface decreased fouling. Different pretreatment methods for the effluent were tested in membrane filtration to decrease fouling. The tested methods; biological treatment, ozonation, enzymatic treatment and flocculation, did not have a clear influence on the fouling of the membrane, but e.g. a biological treatment combined with ultrafiltration made the tested groundwood mill circulation water purer than ultrafiltration alone.

Technology selection and group decision support systems: Case studies on supporting strategic technology selection processes

The objective of the dissertation is to increase understanding and knowledge in the field where group decision support system (GDSS) and technology selection research overlap in the strategic sense. The purpose is to develop pragmatic, unique and competent management practices and processes for strategic technology assessment and selection from the whole company's point of view. The combination of the GDSS and technology selection is approached from the points of view of the core competence concept, the lead user -method, and different technology types. In this research the aim is to find out how the GDSS contributes to the technology selection process, what aspects should be considered when selecting technologies to be developed or acquired, and what advantages and restrictions the GDSS has in the selection processes. These research objectives are discussed on the basis of experiences and findings in real life selection meetings. The research has been mainly carried outwith constructive, case study research methods. The study contributes novel ideas to the present knowledge and prior literature on the GDSS and technology selection arena. Academic and pragmatic research has been conducted in four areas: 1) the potential benefits of the group support system with the lead user -method,where the need assessment process is positioned as information gathering for the selection of wireless technology development projects; 2) integrated technology selection and core competencies management processes both in theory and in practice; 3) potential benefits of the group decision support system in the technology selection processes of different technology types; and 4) linkages between technology selection and R&D project selection in innovative product development networks. New type of knowledge and understanding has been created on the practical utilization of the GDSS in technology selection decisions. The study demonstrates that technology selection requires close cooperation between differentdepartments, functions, and strategic business units in order to gather the best knowledge for the decision making. The GDSS is proved to be an effective way to promote communication and co-operation between the selectors. The constructs developed in this study have been tested in many industry fields, for example in information and communication, forest, telecommunication, metal, software, and miscellaneous industries, as well as in non-profit organizations. The pragmatic results in these organizations are some of the most relevant proofs that confirm the scientific contribution of the study, according to the principles of the constructive research approach.

Automated formulation of optimisation models for steel beam structures

Over 70% of the total costs of an end product are consequences of decisions that are made during the design process. A search for optimal cross-sections will often have only a marginal effect on the amount of material used if the geometry of a structure is fixed and if the cross-sectional characteristics of its elements are property designed by conventional methods. In recent years, optimalgeometry has become a central area of research in the automated design of structures. It is generally accepted that no single optimisation algorithm is suitable for all engineering design problems. An appropriate algorithm, therefore, mustbe selected individually for each optimisation situation. Modelling is the mosttime consuming phase in the optimisation of steel and metal structures. In thisresearch, the goal was to develop a method and computer program, which reduces the modelling and optimisation time for structural design. The program needed anoptimisation algorithm that is suitable for various engineering design problems. Because Finite Element modelling is commonly used in the design of steel and metal structures, the interaction between a finite element tool and optimisation tool needed a practical solution. The developed method and computer programs were tested with standard optimisation tests and practical design optimisation cases. Three generations of computer programs are developed. The programs combine anoptimisation problem modelling tool and FE-modelling program using three alternate methdos. The modelling and optimisation was demonstrated in the design of a new boom construction and steel structures of flat and ridge roofs. This thesis demonstrates that the most time consuming modelling time is significantly reduced. Modelling errors are reduced and the results are more reliable. A new selection rule for the evolution algorithm, which eliminates the need for constraint weight factors is tested with optimisation cases of the steel structures that include hundreds of constraints. It is seen that the tested algorithm can be used nearly as a black box without parameter settings and penalty factors of the constraints.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Effect of Noncondensable Gases on Circulation of Primary Coolant in Nuclear Power Plants in Abnormal Situations

The present study focuses on two effects of the presence of a noncondensable gas on the thermal-hydraulic behavior of thecoolant of the primary circuit of a nuclear reactor in the VVER-440 geometry inabnormal situations. First, steam condensation with the presence of air was studied in the horizontal tubes of the steam generator (SG) of the PACTEL test facility. The French thermal-hydraulic CATHARE code was used to study the heat transfer between the primary and secondary side in conditions derived from preliminary experiments performed by VTT using PACTEL. In natural circulation and single-phase vapor conditions, the injection of a volume of air, equivalent to the totalvolume of the primary side of the SG at the entrance of the hot collector, did not stop the heat transfer from the primary to the secondary side. The calculated results indicate that air is located in the second half-length (from the mid-length of the tubes to the cold collector) in all the tubes of the steam generator The hot collector remained full of steam during the transient. Secondly, the potential release of the nitrogen gas dissolved in the water of the accumulators of the emergency core coolant system of the Loviisa nuclear power plant (NPP) was investigated. The author implemented a model of the dissolution and release ofnitrogen gas in the CATHARE code; the model created by the CATHARE developers. In collaboration with VTT, an analytical experiment was performed with some components of PACTEL to determine, in particular, the value of the release time constant of the nitrogen gas in the depressurization conditions representative of the small and intermediate break transients postulated for the Loviisa NPP. Such transients, with simplified operating procedures, were calculated using the modified CATHARE code for various values of the release time constant used in the dissolution and release model. For the small breaks, nitrogen gas is trapped in thecollectors of the SGs in rather large proportions. There, the levels oscillate until the actuation of the low-pressure injection pumps (LPIS) that refill the primary circuit. In the case of the intermediate breaks, most of the nitrogen gas is expelled at the break and almost no nitrogen gas is trapped in the SGs. In comparison with the cases calculated without taking into account the release of nitrogen gas, the start of the LPIS is delayed by between 1 and 1.75 h. Applicability of the obtained results to the real safety conditions must take into accountthe real operating procedures used in the nuclear power plant.

Lobbying as a Part of Business Management

Lobbying by companies and the management techniques of lobbying have been fairly unknown territory. This study explains different theories related to lobbying including major political, economic and mathematical theories and their connections to lobbying. Existing lobbying networks in the European Union, especially at the European Union level, are explained. Lobbying organisations in the European Union are interconnected. Networks start at a local level, and have connections to national, European Union, international and sometimes to the global level. Relationships between business strategy and lobbying are studied with emphasis on issues management. Business strategy is often seen stemming from business environment analysis and stakeholder management. The issues management concept bridges aspects of business environment analysis and stakeholder management into a project type of management approach. The study includes two different empirical parts. A sample of public policy managers representing the European chemical industry was interviewed, and a chemical industry specific lobbying framework was built. This framework was then tested using a questionnaire sent to European public issues managers representing some of the largest European companies. Based on the results of the questionnaire, a generic framework on how large, European companies manage lobbying in general terms was developed.

ME - Mobile Electronic Personality

Digital services require personal information for a variety of reasons. Due to advances in communication technology, new types of services are evolving alongwith traditional Internet services. Due to the diversity of services, the traditional approaches to personal information handling designed for Internet services are inadequate. Therefore, new approaches are necessary. In this thesis, a solution where personal information is stored in and accessed from the user's mobile device is presented. This approach is called Mobile Electronic Personality (ME). The ME approach is compared to the existing approaches which rely on a database either at a service, a trusted third party or a client program. Various personal information properties are taken into account in the comparison of storage locations. The thesis presents both the internal and the communication architecture of the ME. The internal architecture defines how the information is stored in the mobile device. The communication architecture defines how the information can be accessed by different types of services from the ME. The use of the architecture is described for services in different environments. A simple ME based solution for the authentication of a user is defined. The authentication of service, which is required to protect the privacy of the users is also presented.