大别山碰撞造山带逆冲推覆构造运动学和动力学研究

Since the discovery of coesite-bearing eclogites in Dabie and Sulu region over ten years ago, the Dabie collisional orogen has been the "hot-spot" across the world. While many great progresses have been made for the last decade in the researches on the Dabie and Sulu UHP metamorphic rocks in the following fields, such as, petrology, mineralogy, isotope chronology, and geochemistry, the study of the structural geology on the Dabie orogen is still in great need. Thrust and nappe tectonics commonly developed in any collisional orogenic belt during the syncollisional process of the orogen. It is the same as the Dabic collisional orogen is concerned. The paper put much stress on the thrust and nappe tectonics in the Dabic orogenic belt, which have been seldom systematically studied before. The geometric features including the division and the spatial distribution of various thrust and nappe tectonics in the Dabie orogen have been first studied, which is followed by the detailed studies on their kinematic characteristics in different scales varying from regional tectonics to microtectonics. In the thesis, new deformation ages have been obtained by the isotopic methods of ~(40)Ar-~(39)Ar, Sm-Nd and Rb-Sr minerals-whole rock isochrons on the mylonites formed in three ductile shear zones which bounded three different major nappes in the Dabie collisional orogenic belt. And the petrological, geochemical characteristics of some metamorphic rocks as well as the geotectonics of their protoliths, which have also deformed in the ductile shear zone, are analyzed and discussed. In the paper, twelve nappes in the Dabie orogen are first divided, which are bounded by various important NWW or NW-strike faults and three NNE-strike faults. They are Shangcheng Nappe, Huoshan Nappe, Yuexi Nappe, Yingshanjian-Hengzhong Nappe, Huangzhen Nappe, Xishui-Huangmei Nappe, Zhoudang Nappe, Suhe-Huwan Nappe, Xinxian Nappe, Hong'an Nappe, Mulan Nappe and Hhuangpi-Susong Nappe. In the Dabie orogen, three types of thrust and nappe tectonics belonging to two stages have been confirmed. They are: (1) early stage ductile thrust -nappe tectonics which movement direction was top-to-the-south; (2) late stage brittle to ductile-brittle thrust-nappe tectonics which are characterized by double-vergence movement, including top-to-the-north and top-to-the-south; (3) the third type also belongs to the late stage which also characterized by double-vergence movement, including top-to-the-east and top-to-the-west, and related to the strike-slip movement. The deformation ages of both Wuhe-Shuihou ductile shear zone and Taihu-Mamiao ductile shear zone have been dated by ~(40)Ar-~(39)Ar method. ~(40)Ar/~(39)Ar plateau ages of biotite and mica from the mylonites in these two shear zones are 219.57Ma and 229.12Ma. The plateau ages record the time of ductile deformation of the ductile shear zones, which made the concerned minerals of the mylonites exhume from amphibolite facies to the middle-upper crustal conditions by the early stage ductile thrust-nappe tectonics. The mineral isochons of Sm-Nd and Rb-Sr dating on the same mylonite sample of the metamafic rocks are 156.5Ma and 124.56Ma respectively. The two isochron ages suggest that the mylonitic rock strongly deformed in the amphilbolite facies at 156Ma and then exhumed to the upper crustal green schist condition at 124Ma with the activities of the Quiliping-Changlinggang ductile shear zone which bounded to the southen edge of Xinxian Nappe. Studies of the petrological and geochemical characteristics of some meta-mafic rocks and discussion on the geotectonics of their protoliths indicate that their protoliths were developped in an island arc or back-arc basin or active continental margin in which calc-alkline basalts formed. This means that arc-accretion orogeny had evolved in the margins of North china plate and/or Yangtze plate before these two plates directly collided with each other during the evolution process of Dabie orogen. Three-stage evolution of the thrust-nappe tectonics in Dabie collisional orogen has been induced based on the above-mentioned studies and previous work of others. And a possible 3-stage exhumation model (Thrust-Positive Flower Structure Model) has also been proposed.

火成岩储层裂缝识别、预测理论与方法研究－以济阳坳陷火成岩油藏为例

Since 1970s, igneous reservoirs such as Shang741, Bin674 and Luol51 have been found in Jiyang depression, which are enrichment and heavy-producing. Showing good prospect of exploration and development, igneous reservoirs have been the main part of increasing reserves and production in Shengli oilfield. As fracture igneous reservoir being an extraordinary complex concealed reservoir and showing heavy heterogeneity in spatial distribution, the study of recognition, prediction, formation mechanism and the law of distribution of fracture is essential to develop the reservoir. Guided by multiple discipline theory such as sedimentology, geophysics, mineralogy, petroleum geology, structural geology and reservoir engineering, a set of theories and methods of recognition and prediction of fractured igneous rock reservoir are formed in this paper. Rock data, three-dimensional seismic data, log data, borehole log data, testing data and production data are combined in these methods by the means of computer. Based on the research of igneous rock petrography and reservoir formation mechanism, emphasized on the assessment and forecast of igneous rock reservoir, aimed at establishing a nonhomogeneity quantification model of fractured igneous rock reservoir, the creativity on the fracture recognition, prediction and formation mechanism are achieved. The research result is applied to Jiyang depression, suggestion of exploration and development for fractured igneous rock reservoir is supplied and some great achievement and favourable economic effect are achieved. The main achievements are gained as follows: 1. The main facies models of igneous rock reservoir in JiYang depression are summarized. Based on data and techniques of seism, well log and logging,started from the research of single well rock facies, proceeded by seismic and log facies research, from point to line and line to face, the regional igneous facies models are established. And hypabyssal intrusion allgovite facies model, explosion volcaniclastic rock facies model and overfall basaltic rocks facies model are the main facies models of igneous rock reservoir in JiYang depression. 2. Four nonhomogenous reservoir models of igneous reservoirs are established, which is the base of fracture prediction and recognition. According to characteristics of igneous petrology and spatial types of reservoir, igneous reservoirs of Jiyang depression are divided into four categories: fractured irruptive rock reservoir, fracture-pore thermocontact metamorphic rock and irruptive rock compound reservoir, pore volcanic debris cone reservoir and fracture-pore overfall basaltic rock reservoir. The spatial distribution of each model's reservoir has its features. And reservoirs can be divided into primary ones and secondary ones, whose mechanism of formation and laws of distribution are studied in this paper. 3. Eight geologic factors which dominate igneous reservoirs are presented. The eight geologic factors which dominates igneous reservoirs are igneous facies, epigenetic tectonics deformation, fracture motion, intensity of intrusive effect and adjoining-rock characters, thermo-contact metamorphic rock facies, specific volcano-tectonic position, magmatic cyclicity and epigenetic diagenetic evolution. The interaction of the eight factors forms the four types nonhomogenous reservoir models of igneous reservoirs in Jiyang depression. And igneous facies and fracture motion are the most important and primary factors. 4. Identification patterns of seismic, well log and logging facies of igneous rocks are established. Igneous rocks of Jiyang depression show typical reflecting features on seismic profile. Tabular reflection seismic facies, arc reflection seismic facies and hummocky or mushroom reflection seismic facies are the three main facies. Logging response features of basic basalt and diabase are shown as typical "three low and two high", which means low natural gamma value, low interval transit-time, low neutron porosity, high resistivity and high density. Volcaniclastic rocks show "two high and three low"-high neutron porosity, high interval transit-time, low density, low-resistance and low natural gamma value. Thermo-contact metamorphic rocks surrounding to diabase show "four high and two low" on log data, which is high natural gamma value, high self-potential anomaly, high neutron porosity, high interval transit-time and low density and low-resistance. Based on seismic, well log and logging data, spatial shape of Shang 741 igneous rock is described. 5. The methods of fracture prediction and recognition for fractured igneous reservoir are summarized. Adopting FMI image log and nuclear magnetic resonance log to quantitative analysis of fractured igneous reservoir and according to formation mechanism and shape of fracture, various fractures are recognized, such as high-angle fracture, low-angle fracture, vertical fracture, reticulated fracture, induced fracture, infilling fracture and corrosion vug. Shang 741 intrusive rock reservoir can be divided into pore-vug compound type, pore fracture type, micro-pore and micro-fracture type. Physical properties parameters of the reservoir are computed and single-well fracture model and reservoir parameters model are established. 6. Various comprehensive methods of fracture prediction and recognition for fractured igneous reservoir are put forward. Adopting three-element (igneous facies, fracture motion and rock bending) geologic comprehensive reservoir evaluation technique and deep-shallow unconventional laterolog constrained inversion technique, lateral prediction of fractured reservoir such as Shang 741 is taken and nonhomogeneity quantification models of reservoirs are established.

断层封闭性及其与油气成藏的关系研究-以沾化凹陷孤岛地区为例

Godao area, located in the east of the Zhanhua depression of Jirang sag in Bohai Bay Basin, is the studying area in my dissertation. It is first time that fault sealing properties and the related relationship with the pool forming are studied in Gudao area. On the base of the analysis of the regional tectonics, the author has studied the tertiary structural evolution of the Gudao area and distinguished the fault's level and put forward the distinguishing principle. The geometrical feature, mechanical characters, developmental mechanism and history of the boundary faults in the tectonic unit of this area are all studied and emphasized especially. The buried history of oil-generating depression (that is Gudao depression) and the history of oil and gas migration simultaneously are discussed, the juxtaposition relationship between boundary fault evolutionary history and oil and gas migrated history are expatiated. To the geological condition of the Gudao area, three level faults sealing properties of this area were discussed in detail. Their characteristics of behavior and the intrinsic relationship between their sealing and oil and gas migrated reservoir are elucidated. The pool-forming models related to fault seal are exposed. The author has studied the lithologies of different order of faults, the relationship of occurrence assemblage analysis, normal stress of fault plane in different depth and shale smear factor faults. Then analysis their role in the various faults sealing and confirms fault sealing marks of three different orders faults and exposes the mechanism of fault sealing. Shale smear zone formed by first order fault in lasting activities is one different type of fault breccia and mainly controlled factor to its entrapment of petroleum. Effective sealing threshold value and fault displacement is ascertained. Mainly controlled factor of second fault sealing is bigger compressive stress loaded on fault plane. According to this, quantitatively evaluated index is given. Shale smear zone is necessary condition for second fault stress entrapment. The juxtaposed relationship between the different lithologies within third order faults is most important controlled factor for its sealing. Based on various order of fault sealing features and mechanism in Gudao area, the author proposed three orders of fault sealing models. Shale smear zone sealing model, normal stress sealing model and lithologies juxtaposed sealing model are suggested to first, second and third order fault respectively. The conclusion of this studying has not only the very important theoretical significance and practical value in Gudo area but also the very important guiding role for other areas of related aspects.

山东东营凹陷浊积岩油藏形成机制及预测技术

More and more exploration practises and research results prove that deep-water turbidites and slump turbidites in abrupt slope belt as well as slump turbidites in deposit center are favorable places to find subtle reservoirs. Based on sedimentology, sequence stratigraphy, tectonics and petroleum geology and with the tool of computer, this paper focused a set of questions such as the forming mechanism and m&a of turbidite reservoir in Dongying Sag, and obtained a systematic research result from available information of geology, seismic survey, well logging and testing, etc. Since the structural pattern and tectonic stress are controlling factors on distribution of turbidite reservoirs, deep-water sequence and shallow-water sequence have close relation with various turbidites. The author primarily disclose the regular pattern of the turbidites in the abrupt slope trouth, and predict that the abrupt slope is mainly connected to near-bank slump turbidite fans and deep-water turbidite fans; whereas the depocenter area usually developed with front delta slump fans. According to this, seismic-geology models corresponding to various deposit systems can be set up as a principle for predicting the turbiditea in faulted lacustrine basins. Based on comprehensive study of the turbidite reservoir forming condition and main controlling factors, a differential accumulation model and a multiple migration&accumulation model were also set up for abrupt slope turbidities. Referenced the m

利用重力与地形数据探讨我国大陆若干地区岩石圈有效弹性厚度

The lithosphere behaves as an elastic thin plate overlying a weak fluid. When loaded by topography, it deflects to compensate the topography and isostasy is achieved. The response of the plate is often characterized by the flexural rigidity, or equivalently, by the effective elastic thickness(EET). The relationships between gravity and topography have commonly been employed to investigate quantitively the isostatic compensation of the lithosphere. Cross-spectral techniques have been developed to estimate the admittance and coherence between gravity and topography. The observed admittance and coherence functions, when compared with theoretical admittance and coherence computed for various models and parameters, can provide an estimate of the effective elastic thickness. As for coherence, the wavelength at which the coherence drops from approaching unity at long wavelengths to value approaching zero at short wavelengths is a measure of the rigidity of the lithosphere. This research takes advantage of the high-resolution gravity and topography data in Erdos. Using the coherence technique, we have estimated the effective elastic thickness of this region. Subsurface loads are also considered in our calculation. When the admittance between topography and gravity is obtained, we can filter the topography to give an estimate of gravity anomaly. This would be very important when the gravity data is scarce. Several other regions of China have been selected to investigate the effective elastic thickness of lithosphere. We compare those result with lithosphere thickness obtained through seismological technique and heat flow of the region. We find the effective elastic thickness is always smaller than the seismogenic thickness. This is due to what the effective elastic thickness reflects is only the up elastic part of the lithosphere. And we also find there is some degree of correlation between effective elastic thickness and heat flow. This suggests EET is probably controlled by the thermal state of the lithosphere and correlates with their tectonic age. Thus the estimations of the effective elastic thickness of lithosphere can help to investigate geophysical features of active tectonics of continental lithosphere.

青藏高原壳幔形变与层圈耦合数值模拟

Based on multi-principle (such as structures, tectonics and kinematics) exploratory data and related results of continental dynamics in the Tibetan plateau, the author reconstructed the geological-geophysical model of lithospherical structure and tectonic deformation, and the kinetics boundary conditions for the model. Then, the author used the numerical scheme of Fast Lagrangian Analysis of Continua (FLAC), to stimulate the possible process of the stress field and deformational field in the Tibetan plateau and its adjacent area, since the convergence-collision between the Indian continent and Eurasia continent about 50Ma ago. With the above-mentioned results, the author discussed the relationship between crustal movement in shallow layer and the deformational process in interior layers, and its possible dynamic constraints in deep. At the end of the paper, an integrative model has been put forward to explain the outline images of crust-mantle deformation and coupling in the Tibetan Plateau. (1) The characteristics of crust-mantle structure of the Tibetan plateau have been shown to be very complex, and vertical and horizontal difference is significant. The general characteristics of crust-mantle of the Tibetan plateau may be that it's layering in depth direction, and shows blocking from south to north and belting from east to west, mainly according to the results of about 20 seismic sections, such as wide-angle seismic profiles, CMP, seismic tomography and so on. (2) The crust had shortened about 2200km, while the shortening is different for different block from south to north in the Tibetan plateau. It is about 11.5mm/a in Himalayan block, about 9.0mm/a in Lhas-Gangdese block, about 7.0mm/a in Qiangtang block and Songpan-Ganzi-Kekexili block, about 8.0mm/a in Kunlun-Qaidam, and about ll.Omm/a in Qilian block, since the convergence-collision between the Indian continent and Eurasia continent about 50Ma ago. Which - in demonstrates the shortening rate decreases from south to north, but this rate increases near the north edge of the Tibetan plateau. The crust thickening rate is about 0.4mm/a in the whole Tibetan plateau; and this rate is about 0.5mm/a in Himalayan block, about 0.4mm/a in Lhas-Gangdese block, about 0.3mm/a in Qiangtang block, about 0.2mm/a in Songpan-Ganzi-Kekexili block and about O.lmm/a in Kunlun-Qaidam-Qilian block, since the convergence-collision between the Indian continent and Eurasia continent about 50Ma ago. This implies that the thickening rate decreases in the blocks of the Tibetan plateau. From south to north, the displacement of eastern boundary in the Tibetan plateau is about 37mm/a in Himalayan block, about 45mm/a in Lhas-Gangdese block, about 47mm/a in Qiangtang block, about 43mm/a in Songpan-Ganzi-Kekexili block, and about 35mm/a in Kunlun-Qaidam-Qilian block, since the collision-matching between the Indian continent and Eurasia continent had happened about 50Ma ago. This implies that the rate of eastward displacement is biggest in the middle of plateau, and decreases to both sides. The transition of S-N compression stress field in Tibetan Plateau, since about 28Ma+ ago, may be caused by two reasons: On one hand, the movement direction of Eurasia continent changed from northward to southward about 28Ma± ago in the northern plateau. On the other hand, the front belt that is located between India continent's and Eurasia continent's convergence-collision, had moved southward to high Himalayan from Indus-Brahmaputra suture almost at the same time in southern plateau. Affected by the stress field, the earlier tectonics rotated clockwise, NE and NW conjugate strike-slip faults developed, and the SN rift formed. This indicated that the EW movement started. The ratio between upper crust and lower crust of different blocks from south to north in the Tibetan plateau during the process of deformation are as following: about 3.5~5:1 in Himalayan block, about 1~5: 3-4 (which is about 1:3o--4 in south and about 4~5:3 in north) in Lhas-Gangdese block, about 1:3~447mm/a in these blocks: Which is located to the north of Banggong-nujiang suture.

三峡库区滑坡的时空分布、成因及其预报模式

Landslides are widely distributed along the main stream banks of the Three Gorges Reservoir area. Especially with the acceleration of the human economic activities in the recent 30 years, the occurrence of landslide hazards in the local area trends to be more serious. Because of the special geological, topographic and climatic conditions of the Three Gorges areas, many Paleo-landslides are found along the gentle slope terrain of the population relocation sites. Under the natural condition, the Paleo-landslides usually keep stable. The Paleo-landslides might revive while they are influenced under the strong rainfall, water storage and migration engineering disturbance. Therefore, the prediction and prevention of landslide hazards have become the important problem involving with the safety of migration engineering of the Three Gorges Reservoir area.The past research on the landslides of the Three Gorges area is mainly concentrated on the stability analysis of individual landslide, and importance was little attached to the knowledge on the geological environment background of the formation of regional landslides. So, the relationship between distribution and evolution of landslides and globe dynamic processes was very scarce in the past research. With further study, it becomes difficult to explain the reasons for the magnitude and frequency of major geological hazards in terms of single endogenic or exogenic processes. It is possible to resolve the causes of major landslides in the Three Gorges area through the systematic research of regional tectonics and river evolution history.In present paper, based on the view of coupling of earth's endogenic and exogenic processes, the author researches the temporal and spacial distribution and formation evolution of major landslides(Volume^lOOX 104m3) in the Three Gorges Reservoir area through integration of first-hand sources statistics, .geological evolution history, isotope dating and numerical simulation method etc. And considering the main formation factors of landslides (topography, geology and rainfall condition), the author discusses the occurrence probability and prediction model of rainfall induced landslides.The distribution and magnitude of Paleo-landslides in the Three Gorges area is mainly controlled by lithology, geological structure, bank slope shape and geostress field etc. The major Paleo-landslides are concentrated on the periods 2.7-15.0 X 104aB.R, which conrresponds to the warm and wettest Paleoclimate stages. In the same time, the Three Gorges area experiences with the quickest crust uplift phase since 15.0X 104aB.P. It is indicated that the dynamic factor of polyphase major Paleo-landslides is the coupling processes of neotectonic movement and Quaternary climate changes. Based on the numerical simulation results of the formation evolution of Baota landslide, the quick crust uplift makes the deep river incision and the geostress relief causes the rock body of banks flexible. Under the strong rainfall condition, the pore-water pressure resulted from rain penetration and high flood level can have the shear strength of weak structural plane decrease to a great degree. Therefore, the bank slope is easy to slide at the slope bottom where shear stress concentrates. Finally, it forms the composite draught-traction type landslide of dip stratified rocks.The susceptibility idea for the rainfall induced landslide is put forward in this paper and the degree of susceptibility is graded in terms of the topography and geological conditions of landslides. Base on the integration with geological environment factors and rainfall condition, the author gives a new probabilistic prediction model for rainfall induced landslides. As an example from Chongqing City of the Three Gorges area, selecting the 5 factors of topography, lithology combination, slope shape, rock structure and hydrogeology and 21 kinds of status as prediction variables, the susceptibility zonation is carried out by information methods. The prediction criterion of landslides is established by two factors: the maximum 24 hour rainfall and the antecedent effective precipitation of 15 days. The new prediction model is possible to actualize the real-time regional landslide prediction and improve accuracy of landslide forecast.

Understanding controls on cirque floor altitudes: insights from Kamchatka

Glacial cirques reflect former regions of glacier initiation, and are therefore used as indicators of past climate. One specific way in which palaeoclimatic information is obtained from cirques is by analysing their elevations, on the assumption that cirque floor altitudes are a proxy for climatically controlled equilibrium-line altitudes (ELAs) during former periods of small scale (cirque-type) glaciation. However, specific controls on cirque altitudes are rarely assessed, and the validity of using cirque floor altitudes as a source of palaeoclimatic information remains open to question. In order to address this, here we analyse the distribution of 3520 ice-free cirques on the Kamchatka Peninsula (eastern Russia), and assess various controls on their floor altitudes. In addition, we analyse controls on the mid-altitudes of 503 modern glaciers, currently identifiable on the peninsula, and make comparisons with the cirque altitude data. The main study findings are that cirque floor altitudes increase steeply inland from the Pacific, suggesting that moisture availability (i.e., proximity to the coastline) played a key role in regulating the altitudes at which former (cirque-forming) glaciers were able to initiate. Other factors, such as latitude, aspect, topography, geology and neo-tectonics seem to have played a limited (but not insignificant) role in regulating cirque floor altitudes, though south-facing cirques are typically higher than their north-facing equivalents, potentially reflecting the impact of prevailing wind directions (from the SSE) and/or variations in solar radiation on the altitudes at which former glaciers were able to initiate. Trends in glacier and cirque altitudes across the peninsula are typically comparable (i.e., values typically rise from both the north and south, inland from the Pacific coastline, and where glaciers/cirques are south-facing), yet the relationship with latitude is stronger for modern glaciers, and the relationship with distance to the coastline (and to a lesser degree with aspect) is notably weaker. These differences suggest that former glacier initiation (leading to cirque formation) was largely regulated by moisture availability (during winter months) and the control this exerted on accumulation; whilst the survival of modern glaciers is also strongly regulated by the variety of climatic and non climatic factors that control ablation. As a result, relationships between modern glacier mid-altitudes and peninsula-wide climatic trends are more difficult to identify than when cirque floor altitudes are considered (i.e., cirque-forming glaciers were likely in climatic equilibrium, whereas modern glaciers may not be).

A stacked Late Quaternary fluvio-periglacial sequence from the Axe valley, southern England with implications for landscape evolution and Palaeolithic archaeology

The current model of mid-latitude late Quaternary terrace sequences, is that they are uplift-driven but climatically controlled terrace staircases, relating to both regional-scale crustal and tectonic factors, and palaeohydrological variations forced by quasi-cyclic climatic conditions in the 100 K world (post Mid Pleistocene Transition). This model appears to hold for the majority of the river valleys draining into the English Channel which exhibit 8–15 terrace levels over approximately 60–100 m of altitudinal elevation. However, one valley, the Axe, has only one major morphological terrace and has long-been regarded as anomalous. This paper uses both conventional and novel stratigraphical methods (digital granulometry and terrestrial laser scanning) to show that this terrace is a stacked sedimentary sequence of 20–30 m thickness with a quasi-continuous (i.e. with hiatuses) pulsed, record of fluvial and periglacial sedimentation over at least the last 300–400 K yrs as determined principally by OSL dating of the upper two thirds of the sequence. Since uplift has been regional, there is no evidence of anomalous neotectonics, and climatic history must be comparable to the adjacent catchments (both of which have staircase sequences) a catchment-specific mechanism is required. The Axe is the only valley in North West Europe incised entirely into the near-horizontally bedded chert (crypto-crystalline quartz) and sand-rich Lower Cretaceous rocks creating a buried valley. Mapping of the valley slopes has identified many large landslide scars associated with past and present springs. It is proposed that these are thaw-slump scars and represent large hill-slope failures caused by Vauclausian water pressures and hydraulic fracturing of the chert during rapid permafrost melting. A simple 1D model of this thermokarstic process is used to explore this mechanism, and it is proposed that the resultant anomalously high input of chert and sand into the valley during terminations caused pulsed aggradation until the last termination. It is also proposed that interglacial and interstadial incision may have been prevented by the over-sized and interlocking nature of the sub-angular chert clasts until the Lateglacial when confinement of the river overcame this immobility threshold. One result of this hydrogeologically mediated valley evolution was to provide a sequence of proximal Palaeolithic archaeology over two MIS cycles. This study demonstrates that uplift tectonics and climate alone do not fully determine Quaternary valley evolution and that lithological and hydrogeological conditions are a fundamental cause of variation in terrestrial Quaternary records and landform evolution.

Petrologic and geochemical characterization of São Jorge island volcanism, Azores

The island of São Jorge (38º 45’ 24’’ N - 28º 20’ 44’’W and 38º 33’ 00’’ N - 27º 44’ 32’’ W) is one of the nine islands of the Azores Archipelago that is rooted in the Azores Plateau, a wide and complex region which encompasses the triple junction between the American, Eurasia and Nubia plates. São Jorge Island has grown by fissural volcanic activity along fractures with the regional WNW-ESE trend, unveiling the importance of the regional tectonics during volcanic activity. The combination of the volcanostratigraphy (Forjaz & Fernandes, 1975; and Madeira, 1998) with geochronological data evidences that the island developed during two main volcanic phases. The first subaerial phase that occurred between 1.32 and 1.21 Ma ago (Hildenbrand et al. 2008) is recorded on the lava sequence forming the cliff at Fajã de São João, while the second phase started at 757 ka ago, is still active, and edified the rest of the island. This second phase edified the east side of the island that corresponds to Topo Volcanic Complex, in the period between 757 and 543 ka ago, while the west side named Rosais Volcanic Complex, started at 368 ka ago (Hildenbrand et al. 2008) and was still active at 117 ka ago. After the onset of Rosais, volcanic activity migrates to the center of São Jorge edifying Manadas Volcanic Complex. The volcanism on São Jorge is dominantly alkaline, with a narrow lithological composition ranging between the basanites/tefrites through the basaltic trachyandesites, in spite of this the two volcanic phases show distinct mineralogical, petrographic and geochemical characteristics that should be related with different petrogenetic conditions and growth rates of the island. Abstract viii During the first volcanic phase, growth rates are faster (≈3.4 m/ka), the lavas are slightly less alkaline and plagioclase-richer, pointing to the existence of a relative shallow and dynamic magma chamber where fractional crystallization associated with gravitational segregation and accumulation processes, produced the lavas of Fajã de São João sequence. The average growth rates during the second volcanic phase are lower (≈1.9 m/ka) and the lavas are mainly alkaline sodic, with a mineralogy composed by olivine, pyroxene, plagioclase and oxide phenocrysts, in a crystalline groundmass. The lavas are characterized by enrichment in incompatible trace element and light REE, but show differences for close-spaced lavas that unveil, in some cases, slight different degrees of fertilization of the mantle source along the island. These differences might also result from higher degrees of partial melting, as observed in the early stages of Topo and Rosais volcanic complexes, of a mantle source with residual garnet and amphibole, and/or from changing melting conditions of the mantle source as pressure. The subtle geochemical differences of the lavas contrast with the isotopic signatures, obtained from Sr-Nd-Pb-Hf isotopes, that São Jorge Island volcanism exhibit along its volcanic complexes. The lavas from Topo Volcanic Complex and from the submarine flank, i.e. the lavas located east of Ribeira Seca Fault, sample a mantle source with similar isotopic signature that, in terms of lead, overlaps Terceira Island. The lavas from Rosais and Manadas volcanic complexes, the western lavas, sample a mantle source that becomes progressively more distinct towards the west end of the island and that, in terms of lead isotopes, trends towards the isotopic composition of Faial Island. The two isotopic signatures of São Jorge, observed from the combination of lead isotopes with the other three systems, seem to result from the mixing of three distinct end-members. These end-members are (1) the common component related with the Azores Plateau and the MAR, (2) the eastern component with a FOZO signature and possibly related with the Azores plume located beneath Terceira, and (3) the western component, similar to Faial, where the lithosphere could have been entrained by an ancient magmatic liquid, isolated for a period longer than 2Ga. The two trends observed in the island reinforce the idea of small-scale mantle heterogeneities beneath the Azores region, as it has been proposed to explain the isotopic diversity observed in the Archipelago.

Hidrogeomorfologia e sustentabilidade de recursos hídricos subterrâneos

A água subterrânea de rochas duras é uma fonte importante para fins domésticos, industriais e agrícolas e mesmo para o consumo humano. A geologia, a tectónica, a geomorfologia e as características hidrológicas controlam o fluxo, ocorrência e armazenamento das águas subterrâneas. A disponibilidade da água subterrânea no meio geológico está totalmente dependente das áreas de recarga e de descarga numa determinada bacia. A precipitação é a principal fonte de recarga em aquíferos descontínuos, enquanto que a descarga depende dos declives do terreno e dos gradientes do nível hidrostático e ainda das condições hidrogeológicas do solo. A hidrogeomorfologia é um domínio interdisciplinar emergente, que estuda as relações entre as unidades geomorfológicas e o regime das águas superficiais e subterrâneas de uma determinada área. A compreensão do papel da geomorfologia é essencial para avaliar de forma rigorosa os sistemas hidrogeológicos e os recursos hídricos. Os dados de detecção remota providenciam uma informação espacial valiosa e actualizada da superfície terrestre e dos recursos naturais. Os recentes avanços tecnológicos colocaram as técnicas de detecção remota e os sistemas de informação geográfica (SIG) numa posição cimeira como ferramentas de gestão metodológica. Foi criada, em ambiente SIG, uma base de geo-dados, essencialmente derivada da detecção remota, da cartografia e do trabalho de campo. Esta base de dados, organizada em diferentes níveis de informação, inclui uma avaliação principalmente focalizada no uso do solo, climatologia, declives, geologia, geomorfologia e hidrogeologia. No presente estudo foram cruzados diversos níveis de informação, com a geração de múltiplos mapas temáticos para atingir um quadro integrado dos diversos sectores no Norte e Centro de Portugal. Os sectores em estudo (Caldas da Cavaca, Termas de Entre-os-Rios, Águas de Arouca e Águas do Alardo) estão localizados em sistemas hidrogeológicos predominantemente constituídos por rochas graníticas, por vezes intersectadas por filões de quartzo, aplito-pegmatíticos e doleríticos. Para apoiar a elaboração dos mapas hidrogeomorfológicos foi criada uma base SIG, contendo diversa informação, nomeadamente topografia, hidrografia, litologia, tectónica, morfoestrutura, hidrogeologia, geofísica e uso do solo. Além disso, foram realizadas várias campanhas de campo, as quais permitiram: o estabelecimento dum mapeamento geológico, geomorfológico e hidrogeológico; a caracterização in situ do grau de alteração, resistência e grau de fracturação dos maciços rochosos; o desenvolvimento de um inventário hidrogeológico em conjunto com alguns ensaios expeditos in situ. A interligação entre os parâmetros geomorfológicos, hidrológicos e hidrogeológicos dos sistemas de água subterrânea “normal” e hidromineral destaca a importância de uma cartografia e duma modelação conceptual hidrogeomorfológica. Além disso, contribuirá para um melhor apoio à decisão na gestão sustentável dos recursos hídricos.

Relações petrogénicas entre o complexo gnáissico migmático e o granito de Banabuiú (Nordeste do Brasil)

A região de Banabuiú situa-se no Domínio Ceará Central, na porção setentrional da Província Borborema, um dos cinturões orogénicos formados durante o evento Brasiliano/Pan-Africano no final do Neoproterozóico. As duas unidades litológicas principais presentes na área são: o complexo gnáissicomigmatítico (metapelitos e metagrauvaques) e granitóides brasilianos. Para além das formações paraderivadas, no substrato da região também foi identificado um conjunto de rochas ortoderivadas, até então não individualizado na cartografia existente. Tanto a sequência paraderivada, como os materiais ortoderivados, foram intensamente afectados por metamorfismo regional da fácies granulítica durante a Orogenia Brasiliana, que atingiu as condições de fusão parcial, gerando migmatitos com um amplo espectro de morfologias. Estes migmatitos apresentam estruturas dominantemente estromáticas, embora localmente se tenham identificado também corpos irregulares de diatexitos de tipo“schlieren”, “schollen” e “maciço (s.s)”, indicando que o processo de migmatização culminou com a produção de maiores quantidades de fundido. Em termos tectónicos, o basamento da região regista os efeitos de três fases de deformação, embora as estruturas concordantes à D3 sejam dominantes e obliterem, em muitos casos, as anisotropias anteriores. A maior parte dos fundidos anatécticos parece ter sido produzida durante tectónica transcorrente D3. No entanto, as condições metamórficas para o início da fusão parcial parece ter sido atingidas antes, durante a D2, já que também existem leucossomas, embora em proporções reduzidas, associados com as estruturas desta fase. A grande quantidade de volumes de leucossomas / veios leucocráticos encontrados na região, está relacionada com a actuação da zona de cisalhamento de Orós e parece corresponder a fundidos anatécticos gerados em níveis mais profundos que foram injectados nas sequências orto- e para-derivadas, devido a notória escassez de leucossomas “in situ” nestas rochas. A presença de fluidos aquosos injectados no complexo migmatítico de Banabuiú terá proporcionado a re-hidratação e retrogradação das rochas hospedeiras, evidenciada, essencialmente, pela presença de moscovite tardia, amplamente distribuída nos metassedimentos e ortognaisses, sobretudo nas zonas próximas aos leucossomas e veios leucocráticos. Dados isotópicos apontam que as rochas da região de Banabuiú apresentam valores fortemente negativos de εNdt e positivos de εSrt sugerindo um significativo envolvimento de materiais supracrustais do grupo Acopiara na formação do complexo migmatítico e na petrogénese do maciço granítico de Banabuiú e o marcado fraccionamento isotópico Sm-Nd observado nalguns dos leucossomas analisados indica que os líquidos anatécticos que lhes deram origem resultaram de processos de fusão em desequilíbrio, em condições anidras, e foram rapidamente extraídos da área-fonte, comprovando o carácter alóctone dos veios leucocráticos intercalados nos ortognaisses e paragnaisses de Banabuiú.

Geologia e génese do relevo da Rocha da Pena (Algarve, Portugal) e o seu enquadramento educativo

Dissertação mest., Biologia e Geologia, Universidade do Algarve, 2006

Magnetic studies of the Late Cretaceous magmatism in Portugal : from Iberian plate kinematics to magnetic fabrics

Tese de doutoramento (co-tutela), Ciências Geofísicas e da Geoinformação (Geofísica), Université de Toulouse, Universidade de Lisboa, 2013

Modelos de dinâmica da Terra aplicados à geologia de Portuga l: relevância da experimentação análoga no ensino e na divulgação da geologia

Tese de doutoramento, Geologia (Geodinâmica Interna), Universidade de Lisboa, Faculdade de Ciências, 2014