Experimental and numerical study of the cold crucible melting process

The cold crucible, or induction skull melting process as is otherwise known, has the potential to produce high purity melts of a range of difficult to melt materials, including Ti–Al and Ti6Al4V alloys for Aerospace, Ti–Ta and other biocompatible materials for surgical implants, silicon for photovoltaic and electronic applications, etc. A water cooled AC coil surrounds the crucible causing induction currents to melt the alloy and partially suspend it against gravity away from water-cooled surfaces. Strong stirring takes place in the melt due to the induced electromagnetic Lorentz forces and very high temperatures are attainable under the right conditions (i.e., provided contact with water cooled walls is minimised). In a joint numerical and experimental research programme, various aspects of the design and operation of this process are investigated to increase our understanding of the physical mechanisms involved and to maximise process efficiency. A combination of FV and Spectral CFD techniques are used at Greenwich to tackle this problem numerically, with the experimental work taking place at Birmingham University. Results of this study, presented here, highlight the influence of turbulence and free surface behaviour on attained superheat and also discuss coil design variations and dual frequency options that may lead to winning crucible designs.

Experimental and numerical study of the cold crucible melting process

The cold crucible, or induction skull melting process as is otherwise known, has the potential to produce high purity melts of a range of difficult to melt materials, including Ti–Al and Ti6Al4V alloys for Aerospace, Ti–Ta and other biocompatible materials for surgical implants, silicon for photovoltaic and electronic applications, etc. A water cooled AC coil surrounds the crucible causing induction currents to melt the alloy and partially suspend it against gravity away from water-cooled surfaces. Strong stirring takes place in the melt due to the induced electromagnetic Lorentz forces and very high temperatures are attainable under the right conditions (i.e., provided contact with water cooled walls is minimised). In a joint numerical and experimental research programme, various aspects of the design and operation of this process are investigated to increase our understanding of the physical mechanisms involved and to maximise process efficiency. A combination of FV and Spectral CFD techniques are used at Greenwich to tackle this problem numerically, with the experimental work taking place at Birmingham University. Results of this study, presented here, highlight the influence of turbulence and free surface behaviour on attained superheat and also discuss coil design variations and dual frequency options that may lead to winning crucible designs.

The tilt casting of titanium aluminides

TiAl castings are prone to various defects including bubbles entrained during the turbulent filling of moulds. The present research has exploited the principles of the Durville tilt casting technique to develop a novel process in which the Induction Skull Melting (ISM) of TiAl alloys in a vacuum chamber has been combined with controlled tilt pouring to achieve the tranquil transfer of the metal into a hot ceramic shell mould. Practical casting equipment has been developed to evaluate the feasibility of this process in parallel with the development of novel software to simulate and optimize it. The PHYSICA CFD code was used to simulate the filling, heat transfer and solidification during tilt pouring using a number of free surface modelling techniques, including the novel Counter Diffusion Method (CDM). In view of the limited superheat, particular attention was paid to the mould design to minimize heat loss and gas entrainment caused by interaction between the counter-flowing metal and gas streams. The model has been validated against real-time X-ray movies of the tilt casting of aluminium and against TiAl blade castings. Modelling has contributed to designing a mould to promote progressive filling of the casting and has led to the use of a parabolic tilting cycle to balance the competing requirements for rapid filling to minimize the loss of superheat and slow filling minimize the turbulence-induced defects.

Tracing early stages of species differentiation: Ecological, morphological and genetic divergence of Galapagos sea lion populations

Background: Oceans are high gene flow environments that are traditionally believed to hamper the build-up of genetic divergence. Despite this, divergence appears to occur occasionally at surprisingly small scales. The Galápagos archipelago provides an ideal opportunity to examine the evolutionary processes of local divergence in an isolated marine environment. Galápagos sea lions (Zalophus wollebaeki) are top predators in this unique setting and have an essentially unlimited dispersal capacity across the entire species range. In theory, this should oppose any genetic differentiation.
Results: We find significant ecological, morphological and genetic divergence between the western colonies and colonies from the central region of the archipelago that are exposed to different ecological conditions. Stable isotope analyses indicate that western animals use different food sources than those from the central area. This is likely due to niche partitioning with the second Galápagos eared seal species, the Galápagos fur seal (Arctocephalus galapagoensis) that exclusively dwells in the west. Stable isotope patterns correlate with significant differences in foraging-related skull morphology. Analyses of mitochondrial sequences as well as microsatellites reveal signs of initial genetic differentiation.
Conclusion: Our results suggest a key role of intra- as well as inter-specific niche segregation in the evolution of genetic structure among populations of a highly mobile species under conditions of free movement. Given the monophyletic arrival of the sea lions on the archipelago, our study challenges the view that geographical barriers are strictly needed for the build-up of genetic divergence. The study further raises the interesting prospect that in social, colonially breeding mammals additional forces, such as social structure or feeding traditions, might bear on the genetic partitioning of populations.

Missing Links, Cultural Modernity and the Dead: Anatomically Modern Humans in the Great Cave of Niah (Sarawak, Borneo)

The Great Cave of Niah in Sarawak (northern Borneo) came into the gaze of Western Science through the work of Alfred Russell Wallace, who came to Sarawak in the 1850s to search for ‘missing links’ in his pioneering studies of evolution and the natural history of Island Southeast Asia and Australasia. The work of Tom and Barbara Harrisson in the 1950s and 1960s placed the Great Cave, and particularly their key find, the ‘Deep Skull’, at the nexus of the evolving archaeological framework for the region: for decades the skull, dated in 1958 by adjacent charcoal to c.40,000 BP, was the oldest fossil of an anatomically modern human anywhere in the world and thus critical to ideas about human evolution and dispersal. Although several authorities later questioned the provenance and antiquity of the Deep Skull, renewed investigations of the Harrisson excavations since 2000 have shown that it can be attributed securely to a specific location in the Pleistocene stratigraphy, with direct U-series dating on a piece of the skull indicating an age for it of c.37,500 BP and the first evidence for associated human activity at the site going back to c.50,000 BP. The new work also indicates that the skull is part of a cultural deposit, perhaps a precursor to the long tradition in Borneo of processing of the dead and secondary burial. These indicators of cultural complexity chime with the complexity of the subsistence behaviour of the early users of the caves discussed by Philip Piper and Ryan Rabett in chapter ten of this volume.

Calcification and ossification of the convexity of the falx cerebri and related subdural space in human cadavers

OBJECTIVE: The present work was planned to report the incidence of calcification and ossification of an isolated cranial dural fold. The form, degree of severity and range of extension of such changes will be described. Involvement of the neighboring brain tissue and blood vessels, whether meningeal or cerebral, will also be determined. The results of this study might highlight the occasional incidence of intracranial calcification and ossification in images of the head and their interpretation, by radiologists and neurologists, to be of dural or vascular origin.

METHODS: Two human formalin-fixed cadavers, one middle-aged female another older male, were investigated at the Anatomy Laboratory, College of Medicine, King Faisal University, Dammam, Kingdom of Saudi Arabia during the period from 2000 to 2003. In each cadaver, the skullcap was removed and the convexity of the cranial dura mater, as well as the individual dural folds, were carefully examined for any calcification or ossification. The meningeal and cerebral blood vessels together with the underlying brain were grossly inspected for such structural changes. Calcified or ossified tissues, when identified, were subjected to histological examination to confirm their construction.

RESULTS: The female cadaver showed a calcified parietal emissary vein piercing the skullcap and projecting into the scalp. The latter looked paler and deficient in hair on its right side. The base of the stump was surrounded by a granular patch of calcification. The upper convex border of the falx cerebri was hardened and it presented granules, plaques and a cauliflower mass, which all proved to be osseous in structure. The meningeal and right cerebral vessels were mottled with calcium granules. The underlying temporal and parietal lobes of the right cerebral hemisphere were degenerated. The male cadaver also revealed a calcified upper border of the falx cerebri and superior sagittal sinus. Osseous granules and plaques, similar to those of the first specimen, were also identified but without gross changes in the underlying brain.

CONCLUSION: Calcification or ossification of an isolated site of the cranial dura mater and the intracranial blood vessels might occur. These changes should be kept in mind while interpreting images of the skull and brain. Clinical assessment and laboratory investigations are required to determine whether these changes are idiopathic, traumatic, or as a manifestation of a generalized disease such as hyperparathyroidism, vitamin D-intoxication, or chronic renal failure.

The 'human revolution' in lowland tropical Southeast Asia:the antiquity and behavior of anatomically modern humans at Niah Cave (Sarawak, Borneo)

Recent research in Europe, Africa, and Southeast Asia suggests that we can no longer assume a direct and exclusive link between anatomically modern humans and behavioral modernity (the 'human revolution'), and assume that the presence of either one implies the presence of the other: discussions of the emergence of cultural complexity have to proceed with greater scrutiny of the evidence on a site-by-site basis to establish secure associations between the archaeology present there and the hominins who created it. This paper presents one such case study: Niah Cave in Sarawak on the island of Borneo, famous for the discovery in 1958 in the West Mouth of the Great Cave of a modern human skull, the 'Deep Skull,' controversially associated with radiocarbon dates of ca. 40,000 years before the present. A new chronostratigraphy has been developed through a re-investigation of the lithostratigraphy left by the earlier excavations, AMS-dating using three different comparative pre-treatments including ABOX of charcoal, and U-series using the Diffusion-Absorption model applied to fragments of bones from the Deep Skull itself. Stratigraphic reasons for earlier uncertainties about the antiquity of the skull are examined, and it is shown not to be an `intrusive' artifact. It was probably excavated from fluvial-pond-desiccation deposits that accumulated episodically in a shallow basin immediately behind the cave entrance lip, in a climate that ranged from times of comparative aridity with complete desiccation, to episodes of greater surface wetness, changes attributed to regional climatic fluctuations. Vegetation outside the cave varied significantly over time, including wet lowland forest, montane forest, savannah, and grassland. The new dates and the lithostratigraphy relate the Deep Skull to evidence of episodes of human activity that range in date from ca. 46,000 to ca. 34,000 years ago. Initial investigations of sediment scorching, pollen, palynomorphs, phytoliths, plant macrofossils, and starch grains recovered from existing exposures, and of vertebrates from the current and the earlier excavations, suggest that human foraging during these times was marked by habitat-tailored hunting technologies, the collection and processing of toxic plants for consumption, and, perhaps, the use of fire at some forest-edges. The Niah evidence demonstrates the sophisticated nature of the subsistence behavior developed by modern humans to exploit the tropical environments that they encountered in Southeast Asia, including rainforest. (c) 2006 Elsevier Ltd. All rights reserved.

Prehistoric foragers and farmers in south-east Asia:Renewed investigations at Niah Cave, Sarawak

The paper describes the initial results from renewed investigations at Niah Cave in Sarawak on the island of Borneo, famous for the discovery in 1958 of the c. 40,000-year old 'Deep Skull'. The archaeological sequences from the West Mouth and the other entrances of the cave complex investigated by Tom and Barbara Harrisson and other researchers have potential implications for three major debates regarding the prehistory of south-east Asia: the timing of initial settlement by anatomically modern humans; the means by which they subsisted in the late Pleistocene and early Holocene; and the timing, nature, and causation of the transition from foraging to farming. The new project is informing on all three debates. The critical importance of the Niah stratigraphies was commonly identified - including by Tom Harrisson himself - as because the site provided a continuous sequence of occupation over the past 40,000 years. The present project indicates that Niah was first used at least 45,000 years ago, and probably earlier; that the subsequent Pleistocene and Holocene occupations were highly variable in intensity and character; and that in some periods, perhaps of significant duration, the caves may have been more or less abandoned. The cultural sequence that is emerging from the new investigations may be more typical of cave use in tropical rainforests in south-east Asia than the Harrisson model.

Sound Seam

A moving image work based on research with neurologists and audiologists, collectors and archivists. The film gives voice to the idea that every surface, in particular parts of our anatomy, is potentially inscribed with an unheard sound or echoes of voices from the past. The soundtrack’s musical composition is interlaced with a voice-over which draws on Rainer Maria Rilke’s text 'Primal Sound', where he reflects on the possibility of playing the coronal suture of a skull with a phonograph needle. The film uses microscopic photography, scanning electron microscopy, and sounds of otoacoustic emissions to uncover haunting aural bonescapes. The voiceovers too are recorded using old sound technology as a filter - writing and over-writing of wax cylinder to create unexpected scratches, glitches, loops and echoes. Exhibitions: shown as multi-channel sound/film installation AV festival (Newcastle 2010); solo exhibition at Wellcome Collection (London 2010-11); group exhibition ‘Samsung Art+ Prize’ BFI Southbank (London 2012); group exhibition ‘Transcendence’, Gertrude Contemporary, Melbourne (2014); solo exhibition as part of the International Rotterdam Film Festival (2013); group exhibition ‘The Sight of Sound’, Deutsche Bank VIP Lounge, Frieze Art Fair, NY (2012). Screenings: mini-retrospective at the Lincoln Centre, NY, as part of the New York Film Festival (2013); Jarman Award Tour screenings (2012, venues included Whitechapel Gallery, London; FACT, Liverpool; CCA, Glasgow; The Northern Charter in partnership with CIRCA projects; Nottingham Contemporary, Nottingham; Watershed, Bristol; Duke of York Cinema, Brighton), Whitechapel Gallery, London; FACT, Liverpool; CCA, Glasgow; The Northern Charter in partnership with CIRCA projects, Newcastle (special Q&A Aura Satz with Rebecca Shatwell, director of AV festival); Nottingham Contemporary, Nottingham; Watershed, Bristol; Duke of York Cinema, Brighton; Mini-retrospective at Tate Britain (London 2014); Mini-retrospective screening, DIM Cinema, The Cinematheque (Vancouver 2015); Mini-retrospective at Whitechapel Gallery (London 2016). Publications: ‘Sound Seam’ booklet with contributions by Steven Connor and Tom McCarthy (2010).

Efeito imediato da técnica músculo energia do esternocleidomastóideo com ponto gatilho latente na sensibilidade dolorosa à pressão e nas amplitudes cervicais

Introdução: Os pontos gatilho (PG) do esternocleidomastóideo (ECM) podem ser a causa de dor na face e no crânio. A técnica músculo-energia (TME) pode ser utilizada na presença de PG. Objectivo: Verificar qual o efeito imediato da TME, aplicada no ECM, na sensibilidade dolorosa à pressão (SDP) do PG do ECM e nas amplitudes cervicais em comparação com uma técnica placebo. Metodologia: Uma amostra voluntária de 52 indivíduos foi dividida aleatoriamente por dois grupos. Inicialmente foi medida a SDP e as amplitudes dos movimentos activos da coluna cervical. Após a aplicação da TME, com 20% da força máxima, e da técnica placebo, nos respectivos grupos, a SDP e as amplitudes cervicais foram reavaliadas. Resultados: Não existiram diferenças estatísticas significativas para afirmar que os dados recolhidos antes e depois da aplicação da TME eram significativamente diferentes. Conclusão: Os efeitos imediatos da TME, neste estudo, não foram significativos. No entanto, a bibliografia aponta noutro sentido, tornando-se importante perceber de que forma podemos melhorar a aplicação da TME, de forma a optimizar os seus efeitos.

Reconstrução de Superfícies usando um Scanner 3D de Luz Estruturada

Ao longo dos últimos anos, os scanners 3D têm tido uma utilização crescente nas mais variadas áreas. Desde a Medicina à Arqueologia, passando pelos vários tipos de indústria, ´e possível identificar aplicações destes sistemas. Essa crescente utilização deve-se, entre vários factores, ao aumento dos recursos computacionais, à simplicidade e `a diversidade das técnicas existentes, e `as vantagens dos scanners 3D comparativamente com outros sistemas. Estas vantagens são evidentes em áreas como a Medicina Forense, onde a fotografia, tradicionalmente utilizada para documentar objectos e provas, reduz a informação adquirida a duas dimensões. Apesar das vantagens associadas aos scanners 3D, um factor negativo é o preço elevado. No âmbito deste trabalho pretendeu-se desenvolver um scanner 3D de luz estruturada económico e eficaz, e um conjunto de algoritmos para o controlo do scanner, para a reconstrução de superfícies de estruturas analisadas, e para a validação dos resultados obtidos. O scanner 3D implementado ´e constituído por uma câmara e por um projector de vídeo ”off-the-shelf”, e por uma plataforma rotativa desenvolvida neste trabalho. A função da plataforma rotativa consiste em automatizar o scanner de modo a diminuir a interação dos utilizadores. Os algoritmos foram desenvolvidos recorrendo a pacotes de software open-source e a ferramentas gratuitas. O scanner 3D foi utilizado para adquirir informação 3D de um crânio, e o algoritmo para reconstrução de superfícies permitiu obter superfícies virtuais do crânio. Através do algoritmo de validação, as superfícies obtidas foram comparadas com uma superfície do mesmo crânio, obtida por tomografia computorizada (TC). O algoritmo de validação forneceu um mapa de distâncias entre regiões correspondentes nas duas superfícies, que permitiu quantificar a qualidade das superfícies obtidas. Com base no trabalho desenvolvido e nos resultados obtidos, é possível afirmar que foi criada uma base funcional para o varrimento de superfícies 3D de estruturas, apta para desenvolvimento futuro, mostrando que é possível obter alternativas aos métodos comerciais usando poucos recursos financeiros.

Sir Isaac Brock Facial Reconstruction Project, n.d.

Christian Cardell Corbet, a descendant of Guernsey, Channel Islands, was born in 1966 at Pickering Beach on Lake Ontario. He developed his talents as a landscape artist and at the young age of 14 he began his informal education in commercial signage from his paternal grandfather. He studied at the University of Guelph and McMaster University Anatomy Laboratory. Corbet traveled to England where he began to experiment more in abstraction and non-objective work. In 1995, he presented a portrait of HM Queen Elizabeth the Queen Mother at Clarence House. This brought his career to an international level. He also creates two-dimensional works and has received acclaim for his bronze art medallions. He has gained international recognition as a Forensic Artist working as Artist in Residence for the University of Western Ontario. He does facial reconstructions for special assignments. These original drawings relate to a sculpted medallion of Brock which was authorized by Sir Geoffrey Rowland, Bailiff, Guernsey, Channel Islands and Minister of Education of the States of Guernsey. This is the first time in known recorded history that a forensic analysis and sculpture has been created to accurately depict the facial likeness of Sir Isaac Brock. This project has been established to mark the 2012 anniversary of the death of Brock.

Analyse de la variation intra- et inter-populationnelle : application de deux méthodes craniométriques sur des collections amérindiennes-canadiennes

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

Conventional and Reciprocal Approaches to the Forward and Inverse Problems of Electroencephalography

Le problème inverse en électroencéphalographie (EEG) est la localisation de sources de courant dans le cerveau utilisant les potentiels de surface sur le cuir chevelu générés par ces sources. Une solution inverse implique typiquement de multiples calculs de potentiels de surface sur le cuir chevelu, soit le problème direct en EEG. Pour résoudre le problème direct, des modèles sont requis à la fois pour la configuration de source sous-jacente, soit le modèle de source, et pour les tissues environnants, soit le modèle de la tête. Cette thèse traite deux approches bien distinctes pour la résolution du problème direct et inverse en EEG en utilisant la méthode des éléments de frontières (BEM): l’approche conventionnelle et l’approche réciproque. L’approche conventionnelle pour le problème direct comporte le calcul des potentiels de surface en partant de sources de courant dipolaires. D’un autre côté, l’approche réciproque détermine d’abord le champ électrique aux sites des sources dipolaires quand les électrodes de surfaces sont utilisées pour injecter et retirer un courant unitaire. Le produit scalaire de ce champ électrique avec les sources dipolaires donne ensuite les potentiels de surface. L’approche réciproque promet un nombre d’avantages par rapport à l’approche conventionnelle dont la possibilité d’augmenter la précision des potentiels de surface et de réduire les exigences informatiques pour les solutions inverses. Dans cette thèse, les équations BEM pour les approches conventionnelle et réciproque sont développées en utilisant une formulation courante, la méthode des résidus pondérés. La réalisation numérique des deux approches pour le problème direct est décrite pour un seul modèle de source dipolaire. Un modèle de tête de trois sphères concentriques pour lequel des solutions analytiques sont disponibles est utilisé. Les potentiels de surfaces sont calculés aux centroïdes ou aux sommets des éléments de discrétisation BEM utilisés. La performance des approches conventionnelle et réciproque pour le problème direct est évaluée pour des dipôles radiaux et tangentiels d’excentricité variable et deux valeurs très différentes pour la conductivité du crâne. On détermine ensuite si les avantages potentiels de l’approche réciproquesuggérés par les simulations du problème direct peuvent êtres exploités pour donner des solutions inverses plus précises. Des solutions inverses à un seul dipôle sont obtenues en utilisant la minimisation par méthode du simplexe pour à la fois l’approche conventionnelle et réciproque, chacun avec des versions aux centroïdes et aux sommets. Encore une fois, les simulations numériques sont effectuées sur un modèle à trois sphères concentriques pour des dipôles radiaux et tangentiels d’excentricité variable. La précision des solutions inverses des deux approches est comparée pour les deux conductivités différentes du crâne, et leurs sensibilités relatives aux erreurs de conductivité du crâne et au bruit sont évaluées. Tandis que l’approche conventionnelle aux sommets donne les solutions directes les plus précises pour une conductivité du crâne supposément plus réaliste, les deux approches, conventionnelle et réciproque, produisent de grandes erreurs dans les potentiels du cuir chevelu pour des dipôles très excentriques. Les approches réciproques produisent le moins de variations en précision des solutions directes pour différentes valeurs de conductivité du crâne. En termes de solutions inverses pour un seul dipôle, les approches conventionnelle et réciproque sont de précision semblable. Les erreurs de localisation sont petites, même pour des dipôles très excentriques qui produisent des grandes erreurs dans les potentiels du cuir chevelu, à cause de la nature non linéaire des solutions inverses pour un dipôle. Les deux approches se sont démontrées également robustes aux erreurs de conductivité du crâne quand du bruit est présent. Finalement, un modèle plus réaliste de la tête est obtenu en utilisant des images par resonace magnétique (IRM) à partir desquelles les surfaces du cuir chevelu, du crâne et du cerveau/liquide céphalorachidien (LCR) sont extraites. Les deux approches sont validées sur ce type de modèle en utilisant des véritables potentiels évoqués somatosensoriels enregistrés à la suite de stimulation du nerf médian chez des sujets sains. La précision des solutions inverses pour les approches conventionnelle et réciproque et leurs variantes, en les comparant à des sites anatomiques connus sur IRM, est encore une fois évaluée pour les deux conductivités différentes du crâne. Leurs avantages et inconvénients incluant leurs exigences informatiques sont également évalués. Encore une fois, les approches conventionnelle et réciproque produisent des petites erreurs de position dipolaire. En effet, les erreurs de position pour des solutions inverses à un seul dipôle sont robustes de manière inhérente au manque de précision dans les solutions directes, mais dépendent de l’activité superposée d’autres sources neurales. Contrairement aux attentes, les approches réciproques n’améliorent pas la précision des positions dipolaires comparativement aux approches conventionnelles. Cependant, des exigences informatiques réduites en temps et en espace sont les avantages principaux des approches réciproques. Ce type de localisation est potentiellement utile dans la planification d’interventions neurochirurgicales, par exemple, chez des patients souffrant d’épilepsie focale réfractaire qui ont souvent déjà fait un EEG et IRM.

Imperfect flâneurs : anti-heroes of modern life

Cette thèse commence comme une simple question en réponse au modèle du « parfait flâneur » que Baudelaire a élaboré dans Le peintre de la vie moderne (1853): un flâneur peut-il être imparfait? Je suggère trois interprétations possibles du mot « imparfait ». Il permet d’abord de sortir le flâneur du strict contexte du Paris du dix-neuvième siècle et permet des traductions imparfaites de personnages dans d’autres contextes. Ensuite, le flâneur déambule dans la dimension « imparfaite » de l’imagination fictionnelle – une dimension comparable à l’image anamorphique du crâne dans la peinture Les ambassadeurs de Holbein. Enfin, il réfère à l’imparfait conjugué, « l’imparfait flâneur » peut rappeler le personnage antihéroïque de l’humain dont l’existence est banale et inachevée, comme la phrase « il y avait ». Ces trois visions contribuent à la réinterprétation du flâneur dans le contexte de la fin du vingtième siècle. Mon hypothèse est que l’expérience urbaine du flâneur et la flânerie ne sont possibles que si l’on admet être imparfait(e), qu’on accepte ses imperfections et qu’elles ne nous surprennent pas. Quatre études de romans contemporains et de leurs villes respectives forment les principaux chapitres. Le premier étudie Montréal dans City of forgetting de Robert Majzels. J’examine les façons par lesquelles les personnages itinérants peuvent être considérés comme occupant (ou en échec d’occupation) du Montréal contemporain alors qu’ils sont eux-mêmes délogés. Quant au deuxième chapitre, il se concentre sur le Bombay de Rohinton Mistry dans A fine balance. Mon étude portera ici sur la question de l’hospitalité en relation à l’hébergement et au « dé-hébergement » des étrangers dans la ville. Le troisième chapitre nous amène à Hong-Kong avec la série Feituzhen de XiXi. Dans celle-ci, j’estime que la méthode spéciale de la marelle apparait comme une forme unique de flânerie imparfaite. Le quatrième chapitre étudie Istanbul à travers The black book d’Orhan Pamuk. Inspiré par les notions de « commencement » d’Edward Saïd, mon argumentaire est construit à partir de l’interrogation suivante : comment et quand commence une narration? En lieu de conclusion, j’ai imaginé une conversation entre l’auteur de cette thèse et les personnages de flâneurs imparfaits présents dans les différents chapitres.