Análise quantitativa de dispersão de vazamentos de substâncias inflamáveis e/ou tóxicas em ambientes com barreiras ou semi confinados.

Com o atual desenvolvimento industrial e tecnológico da sociedade, a presença de substâncias inflamáveis e/ou tóxicas aumentou significativamente em um grande número de atividades. A possível dispersão de gases perigosos em instalações de armazenamento ou em operações de transporte representam uma grande ameaça à saúde e ao meio ambiente. Portanto, a caracterização de uma nuvem inflamável e/ou tóxica é um ponto crítico na análise quantitativa de riscos. O objetivo principal desta tese foi fornecer novas perspectivas que pudessem auxiliar analistas de risco envolvidos na análise de dispersões em cenários complexos, por exemplo, cenários com barreiras ou semi-confinados. A revisão bibliográfica mostrou que, tradicionalmente, modelos empíricos e integrais são usados na análise de dispersão de substâncias tóxicas / inflamáveis, fornecendo estimativas rápidas e geralmente confiáveis ao descrever cenários simples (por exemplo, dispersão em ambientes sem obstruções sobre terreno plano). No entanto, recentemente, o uso de ferramentas de CFD para simular dispersões aumentou de forma significativa. Estas ferramentas permitem modelar cenários mais complexos, como os que ocorrem em espaços semi-confinados ou com a presença de barreiras físicas. Entre todas as ferramentas CFD disponíveis, consta na bibliografia que o software FLACS® tem bom desempenho na simulação destes cenários. Porém, como outras ferramentas similares, ainda precisa ser totalmente validado. Após a revisão bibliográfica sobre testes de campo já executados ao longo dos anos, alguns testes foram selecionados para realização de um exame preliminar de desempenho da ferramenta CFD utilizado neste estudo. Foram investigadas as possíveis fontes de incertezas em termos de capacidade de reprodutibilidade, de dependência de malha e análise de sensibilidade das variáveis de entrada e parâmetros de simulação. Os principais resultados desta fase foram moldados como princípios práticos a serem utilizados por analistas de risco ao realizar análise de dispersão com a presença de barreiras utilizando ferramentas CFD. Embora a revisão bibliográfica tenha mostrado alguns dados experimentais disponíveis na literatura, nenhuma das fontes encontradas incluem estudos detalhados sobre como realizar simulações de CFD precisas nem fornecem indicadores precisos de desempenho. Portanto, novos testes de campo foram realizados a fim de oferecer novos dados para estudos de validação mais abrangentes. Testes de campo de dispersão de nuvem de propano (com e sem a presença de barreiras obstruindo o fluxo) foram realizados no campo de treinamento da empresa Can Padró Segurança e Proteção (em Barcelona). Quatro testes foram realizados, consistindo em liberações de propano com vazões de até 0,5 kg/s, com duração de 40 segundos em uma área de descarga de 700 m2. Os testes de campo contribuíram para a reavaliação dos pontos críticos mapeados durante as primeiras fases deste estudo e forneceram dados experimentais para serem utilizados pela comunidade internacional no estudo de dispersão e validação de modelos. Simulações feitas utilizando-se a ferramenta CFD foram comparadas com os dados experimentais obtidos nos testes de campo. Em termos gerais, o simulador mostrou bom desempenho em relação às taxas de concentração da nuvem. O simulador reproduziu com sucesso a geometria complexa e seus efeitos sobre a dispersão da nuvem, mostrando claramente o efeito da barreira na distribuição das concentrações. No entanto, as simulações não foram capazes de representar toda a dinâmica da dispersão no que concerne aos efeitos da variação do vento, uma vez que as nuvens simuladas diluíram mais rapidamente do que nuvens experimentais.

Final report to Congress, The Streambank Erosion Control Evaluation and Demonstration Act of 1974, Section 32, Public Law 93-251 : Main report, supplemented by appendices A-H in separate volumes /

Main report -- Appendix A. Literature survey -- Appendix B. Hydraulic research -- Appendix C. Geotechnical research -- Appendix D. Ohio River demonstration projects -- Appendix F. Missouri River demonstration projects (2 v.) -- Appendix F. Yazoo River Basin demonstration projects -- Appendix G. Demonstration projects on other streams, nationwide (2 v.) -- Appendix H. Evaluation of existing projects (2 v.).

Treatise on powder metallurgy.

Bibliographical footnotes.

CYP2D6: a global analysis of phenotypic and genotypic variation in search of radical cure of Plasmodium vivax malaria

Thesis (Master's)--University of Washington, 2016-06

A QUALIFICAÇÃO E A INSERÇÃO NO MUNDO DO TRABALHO DA PESSOA PORTADORA DE DEFICIÊNCIA: UM ESTUDO SOBRE O IMPACTO DA EXTINÇÃO DA LEI 6.297/75

O presente estudo tem como objetivo, analisar sobre as dificuldades enfrentadas tanto pelas Empresas em cumprir a Legislação de Cotas, como também da Pessoa Portadora de Deficiência (PPDs) em ser inserida no mercado de trabalho, devido a falta de qualificação dos candidatos. Através da pesquisa literária ficou claro que nossa Legislação demonstra de forma evidente que o legislador pretendeu assegurar aos PPDs, as condições mínimas de participação influente na vida ativa da sociedade brasileira e num avanço sem precedentes, criaram-se as linhas básicas do processo de integração do deficiente à sociedade e ao mercado produtivo nacional. Verificou-se também que as empresas estão em busca de profissionais dentre o universo dos PPDs, já qualificados, o que normalmente não encontram. As Organizações do Direito Privado também já desenvolveram alguns projetos para a qualificação desses PPDs. A Lei 6.297/75 que garantia às empresas o desconto em dobro no IR dos gastos com treinamento, foi extinta em 12 de Dezembro de 1990. As empresas precisam de um incentivo financeiro para que possam tratar da qualificação desses profissionais, não mais como um peso, mas sim como um projeto social. Caso as empresas fossem beneficiadas por incentivos fiscais, assim como eram na vigência dessa Lei, teriam as empresas uma visão diferenciada por ocasião da contratação dos PPDs? A metodologia de pesquisa prevê um levantamento bibliográfico e uma pesquisa exploratória que será feita em empresas privadas, instituições que visam ajudar na inserção dos PPDs e nas Organizações do Direito Privado tais como Senai, Sesi, Força Sindical, Fiesp. Verificou-se, mediante a pesquisa, que há uma preocupação por parte de todos os envolvidos, em encontrar meios eficazes para garantir a inserção dos PPDs no mercado de trabalho, embora a falta de qualificação ainda seja o maior problema. A criação de Leis similares à Lei 6.297/75 foi apontada como uma grande ajuda às empresas, já que a elas foi imposta essa responsabilidade.(AU)

Purification of phosphoric acid by solvent extraction

This work follows a feasibility study (187) which suggested that a process for purifying wet-process phosphoric acid by solvent extraction should be economically viable. The work was divided into two main areas, (i) chemical and physical measurements on the three-phase system, with or without impurities; (ii) process simulation and optimization. The object was to test the process technically and economically and to optimise the type of solvent. The chemical equilibria and distribution curves for the system water - phosphoric acid - solvent for the solvents n-amyl alcohol, tri-n-butyl phosphate, di-isopropyl ether and methyl isobutyl ketone have been determined. Both pure phosphoric acid and acid containing known amounts of naturally occurring impurities (Fe P0 4 , A1P0 4 , Ca3(P04)Z and Mg 3(P0 4 )Z) were examined. The hydrodynamic characteristics of the systems were also studied. The experimental results obtained for drop size distribution were compared with those obtainable from Hinze's equation (32) and it was found that they deviated by an amount related to the turbulence. A comprehensive literature survey on the purification of wet-process phosphoric acid by organic solvents has been made. The literature regarding solvent extraction fundamentals and equipment and optimization methods for the envisaged process was also reviewed. A modified form of the Kremser-Brown and Souders equation to calculate the number of contact stages was derived. The modification takes into account the special nature of phosphoric acid distribution curves in the studied systems. The process flow-sheet was developed and simulated. Powell's direct search optimization method was selected in conjunction with the linear search algorithm of Davies, Swann and Campey. The objective function was defined as the total annual manufacturing cost and the program was employed to find the optimum operating conditions for anyone of the chosen solvents. The final results demonstrated the following order of feasibility to purify wet-process acid: di-isopropyl ether, methylisobutyl ketone, n-amyl alcohol and tri-n-butyl phosphate.

Solvent extraction of phosphoric acid

This work investigated the purification of phosphoric acid using a suitable organic solvent, followed by re-extraction of the acid from the solvent using water. The work consisted of practical batch and continuous studies and the economics and design of a full scale plant, based on the experimental data. A comprehensive literature survey on the purification of wet process phosphoric acid by organic solvents is presented and the literature describing the design and operation of mixer-settlers has also been reviewed. In batch studies, the equilibrium and distribution curves for the systems water-phosphoric acid-solvent for Benzaldehyde, Cyclohexanol and Methylisobutylketone (MIBK) were determined together with hydrodynamic characteristics for both pure and impure systems. The settling time increased with acid concentration, but power input had no effect. Drop size was found to reduce with acid concentration and power input. For the continuous studies a novel horizontal mixer~settler cascade was designed, constructed and operated using pure and impure acid with MIBK as the solvent. The cascade incorporates three air turbine agitated, cylindrical 900 ml mixers, and three cylindrical 200 ml settlers with air-lift solvent interstage transfer. Mean drop size in the fully baffled mixer was correlated. Drop size distributions were log-normal and size decreased with acid concentration and power input and increased with dispersed phase hold-up. Phase inversion studies showed that the width of the ambivalent region depended upon rotor speed, hold-up and acid concentration. Settler characteristics were investigated by measuring wedge length. Distribution coefficients of impurities and acid were also investigated. The following optimum extraction conditions were found: initial acid concentration 63%, phase ratio of solvent to acid 1:1 (v/v), impeller speed recommended 900 r.p.m. In the washing step the maximum phase ratio of solvent to water was 8:1 (v/v). Work on phosphoric acid concentration involved constructing distillation equipment consisting of a 10& spherical still. A 100 T/d scale detailed process design including capital cost, operating cost and profitability was also completed. A profit model for phosphoric acid extraction was developed and maximised. Recommendations are made for both the application of the results to a practical design and for extensions of the study.

The Mechanisms of wear of the video head

      This thesis examines the mechanism of wear occuring to the video head and their effect on signal reproduction. in particular it examines the wear occuring to manganese-zinc ferrite heads in sliding contact with iron oxide media.       A literature survey is presented, which covers magnetic recording technologies, focussing on video recording. Existing work on wear of magnetic heads is also examined, and gaps in the theoretical account of wear mechanisms presented in the literature are identified.       Pilot research was carrried out on the signal degradation and wear associated witha number of commercial video tapes, containing a range of head cleaning agents. From this research, the main body of the research was identified. A number of methods of wear measurement were examined for use in this project. Knoop diamond indentation was chosen because experimentation showed it to be capable of measuring wear occuring in situ. This technique was then used to examine the wear associated with different levels of A12O3 and Cr2O3 head cleaning agents.      The results of the research indicated that, whilst wear of the video head increases linearly with increasing HCA content, signal degradation does not vary significantly. The most significant differences in wear and signal reproduction were observed between the two HCAs. The signal degradation of heads worn with tape samples containing A12O3 HCA was found to be lower than heads worn with tapes containing Cr2O3 HCA.      The results also indicate that the wear to the head is an abrasive process characterised by ploughing of the ferrite surface and chipping of the edges of the head gap. Both phenomena appear to be caused by poor iron oxide and head cleaning particles, which create isolated asperities on the tape surface.   

Fermentation methods for dextransucrase production

Several fermentation methods for the production of the enzyme dextransucrase have been employed. The theoretical aspects of these fermentation techniques have been given in the early chapters of this thesis together with a brief overview of enzyme biotechnology. A literature survey on cell recycle fermentation has been carried out followed by a survey report on dextransucrase production, purification and the reaction mechanism of dextran biosynthesis. The various experimental apparatus as employed in this research are described in detail. In particular, emphasis has been given to the development of continuous cell recycle fermenters. On the laboratory scale, fed-batch fermentations under anaerobic low agitation conditions resulted in dextransucrase activities of about 450 DSU/cm3 which are much higher than the yields reported in the literature and obtained under aerobic conditions. In conventional continuous culture the dilution rate was varied in the range between 0.375 h-1 to 0.55 h-1. The general pattern observed from the data obtained was that the enzyme activity decreased with increase in dilution rate. In these experiments the maximum value of enzyme activity was ∼74 DSU/cm3. Sparging the fermentation broth with CO2 in continuous culture appears to result in a decrease in enzyme activity. In continuous total cell recycle fermentations high steady state biomass levels were achieved but the enzyme activity was low, in the range 4 - 27 DSU/cm3. This fermentation environment affected the physiology of the microorganism. The behaviour of the cell recycle system employed in this work together with its performance and the factors that affected it are discussed in the relevant chapters. By retaining the whole broth leaving a continuous fermenter for between 1.5 - 4 h under controlled conditions, the enzyme activity was enhanced with a certain treatment from 86 DSU/cm3 to 180 DSU/cm3 which represents a 106% increase over the enzyme activity achieved by a steady-state conventional chemostat. A novel process for dextran production has been proposed based on the findings of this latter part of the experimental work.

A novel process for the production of castor oil by direct solvent extraction

This research was undertaken to: develop a process for the direct solvent extraction of castor oil seeds. A literature survey confirmed the desirability of establishing such a process with emphasis on the decortication, size, reduction, detoxification-deallergenization, and solvent·extraction operations. A novel process was developed for the dehulling of castor seeds which consists of pressurizing the beans and then suddenly releasing the pressure to vaccum. The degree of dehulling varied according to the pressure applied and the size of the beans. Some of the batches were difficult-to-hull, and this phenomenon was investigated using the scanning electron microscope and by thickness and compressive strength measurements. The other variables studied to lesser degrees included residence time, moisture, content, and temperature.The method was successfully extended to cocoa beans, and (with modifications) to peanuts. The possibility of continuous operation was looked into, and a mechanism was suggested to explain the method works. The work on toxins and allergens included an extensive literature survey on the properties of these substances and the methods developed for their deactivation Part of the work involved setting up an assay method for measuring their concentration in the beans and cake, but technical difficulties prevented the completion of this aspect of the project. An appraisal of the existing deactivation methods was made in the course of searching for new ones. A new method of reducing the size of oilseeds was introduced in this research; it involved freezing the beans in cardice and milling them in a coffee grinder, the method was found to be a quick, efficient, and reliable. An application of the freezing technique was successful in dehulling soybeans and de-skinning peanut kernels. The literature on the solvent extraction, of oilseeds, especially castor, was reviewed: The survey covered processes, equipment, solvents, and mechanism of leaching. three solvents were experimentally investigated: cyclohexane, ethanol, and acetone. Extraction with liquid ammonia and liquid butane was not effective under the conditions studied. Based on the results of the research a process has been suggested for the direct solvent extraction of castor seeds, the various sections of the process have analysed, and the factors affecting the economics of the process were discussed.

Privatization : problems of implementation in Egypt

This study aims to investigate to what extent the views of the managers of the enterprises to be privatized are a barrier to smooth implementation of privatization as opposed to other problems. Accordingly, the research tackles two main issues: Identification and analysis of the major problems encountered in the implementation of the Egyptian privatization programme and at which level these problems exist while proposing different approaches to tackle them; and views of public sector top and middle-level managers regarding the main issues of privatization. The study relies upon a literature survey, interviews with stakeholders, a survey of managers' attitudes and several illustrative case studies. A model of "good practice" for the smooth and effective implementation of privatization has been designed. Practice in Egypt has then been studied and compared with the "good practice" model. Lack of strictness and firmness in implementing the announced privatization programme has been found to be a characteristic of Egyptian practice. This is partly attributable to the inadequacy of the programme and partly to the different obstacles to implementation. The main obstacles are doubtful desirability of privatization on the part of the managers at different implementation levels, resistance of stakeholders, in adequately of the legal framework governing privatization, redundant labour, lack of an efficient monitoring system allowing for accountability, inefficient marketing of privatization, ineffective communication, insufficient information at different levels and problems related to valuation and selling procedures. A large part of the thesis is concerned with SOE (State Owned Enterprise) managers' attitudes on and understanding of the privatization (appraised through surveys). Although most managers have stated their acceptance of privatization, many of their responses show that they do not accept selling SOEs. They understand privatization to include enterprise reform and restructuring, changing procedures and giving more authority to company executives, but not necessarily as selling SOEs. The majority of managers still see many issues that have to be addressed for smooth implementation of privatization e.g. insufficiency of information, incompleteness of legal framework, restructuring and labour problems. The main contribution to knowledge of this thesis is the study of problems of implementing privatization in developing countries especially managers' resistance to privatization as a major change, partly because of the threat it poses and partly because of the lack of understanding of privatization and implications of operating private businesses. A programme of persuading managers and offsetting the unfavourable effects is recommended as an outcome of the study. Five different phrases and words for the national Index to theses are: Egypt, privatization, implementation of privatization, problems of implementing privatization and managers' attitudes towards privatization.

The finance of biotechnology:investment in new biotechnology firms by British venture capitalists-attitudes to, and evaluation of, business proposals

A notable feature of the recent commercialisation of biotechnology has been the success of 200 or so new firms, established in America since 1976, in exploiting specialised market niches. A key factor in their formation has been the ready availability of venture capital funding. These firms have been instrumental in establishing America's lead in exploiting biotechnology. It is this example which Britain has attempted to emulate as part of its strategy for developing its own biotechnology capabilities. This thesis investigated some aspects of the relationship between biotechnology and venture capital, concentrating on the determinants of the venture capitalist's investment decision. Following an extensive literature survey, two hypothetical business proposals were used to find what venture capitalists themselves consider to be the key elements of this decision. It was found that venture capitalists invest in people, not products, and businesses, not industries. It was concluded that venture capital-backed small firms should, therefore, be seen as an adjunct to the development of biotechnology in Britain, rather than as a substitute for a co-ordinated, co-operative strategy involving Government, the financial institutions, industry and academia. This is chiefly because the small size of the UK's domestic market means that many potentially important innovations in biotechnology may continue to be lost, since the short term identification of market opportunities for biotechnology products will dictate that they are insupportable in Britain alone. In addition, the data analysis highlighted some interesting methodological issues concerning the investigation of investment decision making. These related especially to shortcomings in the use of scoresheets and questionnaires in research in this area. The conclusion here was that future research should concentrate on the reasons why an individual reaches an investment decision. It is argued that only in this way can the nature of the evaluation procedures employed by venture capitalists be properly understood.

The application of knowledge based expert systems to mechanical engineering design

Investigation of the different approaches used by Expert Systems researchers to solve problems in the domain of Mechanical Design and Expert Systems was carried out. The techniques used for conventional formal logic programming were compared with those used when applying Expert Systems concepts. A literature survey of design processes was also conducted with a view to adopting a suitable model of the design process. A model, comprising a variation on two established ones, was developed and applied to a problem within what are described as class 3 design tasks. The research explored the application of these concepts to Mechanical Engineering Design problems and their implementation on a microcomputer using an Expert System building tool. It was necessary to explore the use of Expert Systems in this manner so as to bridge the gap between their use as a control structure and for detailed analytical design. The former application is well researched into and this thesis discusses the latter. Some Expert System building tools available to the author at the beginning of his work were evaluated specifically for their suitability for Mechanical Engineering design problems. Microsynics was found to be the most suitable on which to implement a design problem because of its simple but powerful Semantic Net Knowledge Representation structure and the ability to use other types of representation schemes. Two major implementations were carried out. The first involved a design program for a Helical compression spring and the second a gearpair system design. Two concepts were proposed in the thesis for the modelling and implementation of design systems involving many equations. The method proposed enables equation manipulation and analysis using a combination of frames, semantic nets and production rules. The use of semantic nets for purposes other than for psychology and natural language interpretation, is quite new and represents one of the major contributions to knowledge by the author. The development of a purpose built shell program for this type of design problems was recommended as an extension of the research. Microsynics may usefully be used as a platform for this development.

An experimental analysis of operating conditions in cold roll-forming

A detailed literature survey confirmed cold roll-forming to be a complex and little understood process. In spite of its growing value, the process remains largely un-automated with few principles used in set-up of the rolling mill. This work concentrates on experimental investigations of operating conditions in order to gain a scientific understanding of the process. The operating conditions are; inter-pass distance, roll load, roll speed, horizontal roll alignment. Fifty tests have been carried out under varied operating conditions, measuring section quality and longitudinal straining to give a picture of bending. A channel section was chosen for its simplicity and compatibility with previous work. Quality measurements were measured in terms of vertical bow, twist and cross-sectional geometric accuracy, and a complete method of classifying quality has been devised. The longitudinal strain profile was recorded, by the use of strain gauges attached to the strip surface at five locations. Parameter control is shown to be important in allowing consistency in section quality. At present rolling mills are constructed with large tolerances on operating conditions. By reduction of the variability in parameters, section consistency is maintained and mill down-time is reduced. Roll load, alignment and differential roll speed are all shown to affect quality, and can be used to control quality. Set-up time is reduced by improving the design of the mill so that parameter values can be measured and set, without the need for judgment by eye. Values of parameters can be guided by models of the process, although elements of experience are still unavoidable. Despite increased parameter control, section quality is variable, if only due to variability in strip material properties. Parameters must therefore be changed during rolling. Ideally this can take place by closed-loop feedback control. Future work lies in overcoming the problems connected with this control.

Dynamic behaviour of rotary mechanical seals

This thesis covers both experimental and computer investigations into the dynamic behaviour of mechanical seals. The literature survey shows no investigations on the effect of vibration on mechanical seals of the type common in the various process industries. Typical seal designs are discussed. A form of Reynolds' equation has been developed that permits the calculation of stiffnesses and damping coefficients for the fluid film. The dynamics of the mechanical seal floating ring have been investigated using approximate formulae, and it has been shown that the floating ring will behave as a rigid body. Some elements, such as the radial damping due to the fluid film, are small and may be neglected. The equations of motion of the floating ring have been developed utilising the significant elements, and a solution technique described. The stiffness and damping coefficients of nitrile rubber o-rings have been obtained. These show a wide variation, with a constant stiffness up to 60 Hz. The importance of the effect of temperature on the properties is discussed. An unsuccessful test rig is described in the appendices. The dynamic behaviour of a mechanical seal has been investigated experimentally, including the effect of changes of speed, sealed pressure and seal geometry. The results, as expected, show that high vibration levels result in both high leakage and seal temperatures. Computer programs have been developed to solve Reynolds' Equation and the equations of motion. Two solution techniques for this latter program were developed, the unsuccesful technique is described in the appendices. Some stability problems were encountered, but despite these the solution shows good agreement with some of the experimental conditions. Possible reasons for the discrepancies are discussed. Various suggestions for future work in this field are given. These include the combining of the programs and more extensive experimental and computer modelling.