The design, development, and manufacture of large wood/composite wind turbine rotors

Discusses a study conducted to determine the best development path for large wind turbine rotor design. Shape and number of blades, degrees of freedom allowed, and control strategy are considered. Manufacture and costs are also discussed. Two-bladed, stall-regulated, teetered rotors are more cost effective than three-bladed rotors. Single-bladed rotors can be even more cost-effective. No new manufacturing techniques are required. The most cost-effective rotor includes a hub constructed in wood/composite materials, bonded to the blades. There is strong incentive for the blade manufacturer to supply the complete rotor. (from author's abstract)

Reproductive biology of freshwater crab, Paratelphusa spinigera, Wood Mason (Crustacea-Decapoda)

This study was aimed to analyze the annual reproductive cycle of the freshwater crab Paratelphusa spinigera (Wood Mason, 1871). P. spinigera breeds only once in a year; hence, it is a monovoltine species. Gonad maturation, changes in abdomen shape, size and female maturity index (FMI) marked the onset of sexual maturity of female P. spinigera. The occurrence of berried females marked the onset of breeding season. The fecundity of P. spinigera ranged from 533 to 1306 in number, with an average of 699.11 ± 217.38. The correlation of fecundity with carapace width and body weight was also found to be positively significant (r = 0. 780 and 0.933, respectively). The eggs were carried on the pleopods and nurtured for approximately 30-35 days, until the eggs hatch, showing perfect maternal care. The FMI values ranging between 0.70 and 0.80 represented immature stage of gonadal development. When the FMI ranged from 0.91 to 1.00, all stages of gonadal development, i.e. developing, maturing and mature stages were observed. The females with fully ripe ovary had FMI values greater than 1.00.

Studies on the influence of moisture and specific gravity on the strength properties of mango wood (Mangifera indica)

Influence of moisture and specific gravity on the strength of mango wood is discussed. The co-efficient of correlation between specific gravity and breaking strength was found to be non-significant. The relation of strength and moisture was found to be highly significant. The mean strength values indicated a reduction in strength when the moisture increased from 8.5 to 18.8%. However no appreciable difference in strength values could be observed when moisture increased above 37%. The strength-moisture relationship is a straight line, passing approximately through the fibre saturation point. By using the exponential formula, the breaking strength corresponding to any moisture level between zero and fibre saturation can be determined.

Studies on the chemical control of psychrophilic bacterial spoilage of fish. 4 - The effect of chemical preservatives on the growth of psychrophilic bacteria isolated from marine fish

Dehydroacetic acid and ammonia were found to be very effective in checking the growth of all the cultures at all concentrations tried. The two nitrofuran derivatives namely, semicarbazone and AF-2 were fairly effective, semicarbazone being more effective than AF-2. Sodium nitrite was found to be totally ineffective against the cultures at all concentrations tried.

Experiments with fibre-glass sheathing as a protection against marine wood-boring organisms

Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.

Studies on arsenical creosote as a wood preservative for marine structures. Part 1. Incorporation of arsenic in creosote at various temperatures

A detailed study of the fortification of normal creosote and low temperature creosote with As sub(2) O sub(3) at 40°C, 50°C, 60°C, 70°C, 80°C and 90°C was carried out. When compared to normal creosote, low temperature creosote has been found to combine more easily with As sub(2) O sub(3) when temperature was . raised from 40 to 90°C. The incorporated arsenic values obtained shows that low temperature creosote with high phenolic content, retains considerably more As sub(2) O sub(3) and a maximum of 0.2180% w/w can be incorporated in low temperature creosote at 90°C.

Studies on arsenical creosote as a wood preservative for marine structures. Part 2. Observation on leaching, corrosion and resistance to borer attack

A detailed study on arsenical creosote with reference to leaching, corrosion and anti-borer properties was carried out. Results showed that aging had very little effect on the preservative which suggested better fixation of the preservative into the wood. Corrosion of mild steel, galvanised iron, aluminium-magnesium alloy (M57S) and copper panels in the preservative was found to be negligible. Normal creosote and low temperature creosote of Regional Research Laboratory, Hyderabad, both fortified with arsenic trioxide resisted borer damage on wooden panels for a period of over five months in the port of Cochin. The performance of low temperature creosote fortified with arsenic was found to be equally satisfactory when compared to normal creosote fortified in the same manner. A loading of 208.6 Kgs/ml³ for Haldu (Adina cordifolia) and 138 Kgs/m³ for Mango (Mangifera indica) in the case of normal creosote and 177 Kgs/m³ for Mango the case of RRL creosote were found to be sufficient for treating the wood.

Utilization of treated wood, steel, fibreglass, ferrocement and aluminium in the construction of modern fishing boats and their comparative cost analysis

Modern fishing boats have to be built not only on perfect lines but also with sound and strong construction materials that will ensure a long lasting trouble free service commensurate with the heavy capital investment involved. Choice of construction materials for fishing boats need careful scrutiny as they have to perform too well under most aggressive environments-sea-water and marine atmosphere. A number of alternative boat-building materials are now available whose comparative merits and demerits as well as comparative costs are brought out in this paper.

Pickle curing of fish using tartaric acid and garlic as preservatives

Tartaric acid and garlic have proved highly satisfactory as pickling agents when used in combination, giving fishery products of good appearance, texture, taste and shelf life. Full details of the pickling method are given.

Molecular phylogeny of wood mice (Apodemus, Muridae) in East Asia

Sequences of the mitochondrial cytochrome b (1140 bp) and nuclear IRBP (1152 bp) genes were used to assess the evolutionary history of Apodemus, using the complete set of Asian species. Our results indicate that speciation in Asia involved three radiations, which supports an earlier study. The initial radiation yielded A. argenteus (Japanese endemic), A. gurkha (Nepalese endemic), and the ancestral lineage of the remaining Asian species. This lineage subsequently diverged into four groups: agrarius-chevrieri (agrarius group), draco-latronum-semotus (draco group), A. peninsulae, and A. speciosus (Japanese endemic). The final step consisted of divergence within two species groups as a consequence of the geography of the Yunnan-Guizhou plateau and Taiwan. The ecological ability of two Apodemus-species to inhabit one locality via niche partitioning likely drove the second radiation and shaped the basic geographical pattern seen today: A. argenteus and A. speciosus in Japan, A. agrarius and A. peninsulae in northern China, and the A. agrarius and A. draco groups in southern China. The three radiations are estimated to have occurred 7.5, 6.6, and 1.8-0.8 Mya respectively, using the IRBP clock, based on rat-mouse divergence 12 Mya. (C) 2003 The Linnean Society of London.

Observations on the parasites and associates of wood boring molluscs and crustaceans of the south-west coast of India

An interesting assemblage of commensalic organisms ranging from Protozoa to Arthropoda has been identified from the wood boring animals (molluscs and crustaceans) from the south-west coast of India. Certain aspects of the general biology of the associated ciliates such as the nature of incidence, division in relation to environmental parameters, survival outside the body of the host and reactions related to the general condition of the host are described. Results are also presented of the tolerance of the rare commensalic hydroid Eutima commensalis to different salinities of the medium.

Vertical distribution of marine wood boring and fouling organisms from the estuarine areas of the south west coast of India

Vertical distribution of marine wood boring and fouling organisms from three different estuarine areas namely, the Ernakulam channel in the Cochin backwaters, Ayiramthengu in the Kayamkulam Lake and Neendakara in the Asthamudi Lake during the post-monsoon, the pre-monsoon and the monsoon periods is presented. The boring organisms noticed during the present study were Martesia striata, Teredo furcifera, Nausitora hedleyi and Sphaeroma terebrans. The dominant fouling organisms were Balanus amphitrite amphitrite, calcareous worms and Modiolus sp. Algae and diatoms were very common on the sub-tidal panels during the monsoon. The incidence of Teredo, Nausitora and calcareous tube worms were significantly high on the bottom panels. Sphaeroma, Balanus and Modiolus occurred in greater numbers on the intertidal panels.

High temperature processing of fish sausage 2. - Effect of certain preservatives on the shelf life

The effects of preservatives like fat coated sorbic acid (FCSA) and glucono-deltalactone (D-lactone), both separately and in combination, on the shelf life of high temperature (115.6°C for 20 min) processed fish sausage, stored at three different temperatures namely, ambient (28±2° C), cooler storage (2±2°C) and refrigerator (10±2° C) were studied. Whereas the control (without preservative), FCSA, D-lactone and FCSA + D-lactone treated samples could be stored for 9, 11 and 13 days respectively at ambient temperature, those stored at lower temperatures were found to be in acceptable condition for 70 and 80 days respectively. Organoleptic evaluation of taste, flavour the products carried out by panelists revealed that FCSA and FCSA + D-lactone treated samples were unacceptable with regard to the taste, flavour and texture. However, the taste flavour and texture of the control and D-lactone treated samples were in acceptable condition.