Monitoring of centrifugal pump operation by a frequency converter

Centrifugal pumps are widely used in industrial and municipal applications, and they are an important end-use application of electric energy. However, in many cases centrifugal pumps operate with a significantly lower energy efficiency than they actually could, which typically has an increasing effect on the pump energy consumption and the resulting energy costs. Typical reasons for this are the incorrect dimensioning of the pumping system components and inefficiency of the applied pump control method. Besides the increase in energy costs, an inefficient operation may increase the risk of a pump failure and thereby the maintenance costs. In the worst case, a pump failure may lead to a process shutdown accruing additional costs. Nowadays, centrifugal pumps are often controlled by adjusting their rotational speed, which affects the resulting flow rate and output pressure of the pumped fluid. Typically, the speed control is realised with a frequency converter that allows the control of the rotational speed of an induction motor. Since a frequency converter can estimate the motor rotational speed and shaft torque without external measurement sensors on the motor shaft, it also allows the development and use of sensorless methods for the estimation of the pump operation. Still today, the monitoring of pump operation is based on additional measurements and visual check-ups, which may not be applicable to determine the energy efficiency of the pump operation. This doctoral thesis concentrates on the methods that allow the use of a frequency converter as a monitoring and analysis device for a centrifugal pump. Firstly, the determination of energy-efficiency- and reliability-based limits for the recommendable operating region of a variable-speed-driven centrifugal pump is discussed with a case study for the laboratory pumping system. Then, three model-based estimation methods for the pump operating location are studied, and their accuracy is determined by laboratory tests. In addition, a novel method to detect the occurrence of cavitation or flow recirculation in a centrifugal pump by a frequency converter is introduced. Its sensitivity compared with known cavitation detection methods is evaluated, and its applicability is verified by laboratory measurements for three different pumps and by using two different frequency converters. The main focus of this thesis is on the radial flow end-suction centrifugal pumps, but the studied methods can also be feasible with mixed and axial flow centrifugal pumps, if allowed by their characteristics.

Wind turbine operation in cold climate

The goal of the master‘s thesis is to determine and estimate ice accretion influence on the wind turbine blade performance. The thesis describes the technique of ice accretion calculation on the wind turbine blade and determination characteristics of the turbine with ice accreted. The methodology of the classic Blade Element Moment Theory was used. Iced blade experimental data was investigated in order to calculate blade with ice characteristics. The obtained results shows that iced blade power coefficient is lower than clean blade one. The heating system implementation shows that in the particular site in the Lapland region it is efficient.

Model development for circulating fluidized bed boiler operation

Comprehensive understanding of the heat transfer processes that take place during circulating fluidized bed (CFB) combustion is one of the most important issues in CFB technology development. This leads to possibility of predicting, evaluation and proper design of combustion and heat transfer mechanisms. The aim of this thesis is to develop a model for circulating fluidized bed boiler operation. Empirical correlations are used for determining heat transfer coefficients in each part of the furnace. The proposed model is used both in design and offdesign conditions. During off-design simulations fuel moisture content and boiler load effects on boiler operation have been investigated. In theoretical part of the thesis, fuel properties of most typical classes of biomass are widely reviewed. Various schemes of biomass utilization are presented and, especially, concerning circulating fluidized bed boilers. In addition, possible negative effects of biomass usage in boilers are briefly discussed.

Apple, Nokia and RIM – Rivalry and Co-operation between Three Mobile Phone Corporations

The purpose of this paper is to gather enough evidence to speculate the future of Nokia, Rim and Apple. The thesis goes over the history, current events and business model of each company. This paper includes differences between the companies and co-operation and rivalry, such as patent infringement cases. The study is limited to smartphones and their future. The result of this study is that Apple will continue its steady increase in market share, while Nokia will first decrease and after the launch of the Windows Phone it will rise again. RIM‟s result has not been as good as in past years and it has lost market share. The decrease of share price may lead to acquisition by a company interested in RIM technology.

Field Weakening, Parameters and Operation Range of the Permanent Magnet Traction Motors

The main focus of this thesis is to define the field weakening point of permanent magnet synchronous machine with embedded magnets in traction applications. Along with the thesis a modelling program is made to help the designer to define the field weakening point in practical applications. The thesis utilizes the equations based on the current angle. These equations can be derived from the vector diagram of permanent magnet synchronous machine. The design parameters of the machine are: The maximum rotational speed, saliency ratio, maximum induced voltage and characteristic current. The main result of the thesis is finding out the rated rotational speed, from which the field weakening starts. The action of the machine is estimated at a wide speed range and the changes of machine parameters are examined.

Strike hard, strike sure - Operation Musketeer : British military planning during the Suez Crisis, 1956

Operation Musketeer, a combined joint Anglo-French operation aimed at regaining control of the Suez Canal in 1956, has received much attention from scholars. The most common approach to the crisis has been to examine the political dimension. The political events that led Prime Minister Anthony Eden’s cabinet to decide to use military force against the wishes of their superior American ally and in the face of American economic pressure and a Soviet threat to attack Paris and London with rockets have been analysed thoroughly. This is particularly the case because the ceasefire and eventual withdrawal were an indisputable defeat of British policy in the Middle East. The military operation not only ruined Prime Minister Eden’s career, but it also diminished the prestige of Britain. It was the beginning of the end, some claim. The British Empire would never be the same. As the consequences of using force are generally considered more important than the military operations themselves, very little attention has been paid to the military planning of Operation Musketeer. The difference between the number of publications on Operation Corporate of the Falklands War and Operation Musketeer is striking. Not only has there been little previous research on the military aspects of Musketeer, the conclusions drawn in the existing works have not reached a consensus. Some historians, such as Correlli Barnett, compare Musketeer to the utter failures of the Tudor landings and Gallipoli. Among significant politicians, Winston Churchill, who had retired from the prime ministership only a year before the Suez Crisis, described the operation as “the most ill-conceived and ill-executed imaginable”. Colin McInnes, a well-known author on British defence policy, represents the middle view when he describes the execution as “far from failure”. Finally, some, like Julian Thompson, the Commander of 3 Commando Brigade during the Falklands War, rate the military action itself as being successful. The interpretation of how successful the handling of the Suez Crisis was from the military point of view depends very much on the approach taken and the areas emphasised in the subject. Frequently, military operations are analysed in isolation from other events. The action of a country’s armed forces is separated from the wider context and evaluated without a solid point of comparison. Political consequences are often used as validated criteria, and complicated factors contributing to military performance are ignored. The lack of comprehensive research on the military action has left room for an analysis concentrating on the military side of the crisis.

Microgeneration of electricity with producer gas in dual fuel mode operation

Among the alternatives to meet the increasing of world demand for energy, the use of biomass as energy source is one of the most promising as it contributes to reducing emissions of carbon dioxide in the atmosphere. Gasification is a technological process of biomass energy production of a gaseous biofuel. The fuel gas has a low calorific value that can be used in Diesel engine in dual mode for power generation in isolated communities. This study aimed to evaluate the reduction in the consumption of oil Diesel an engine generator, using gas from gasification of wood. The engine generator brand used was a BRANCO, with direct injection power of 7.36 kW (10 HP) coupled to an electric generator 5.5 kW. Diesel oil mixed with intake air was injected, as the oil was injected via an injector of the engine (dual mode). The fuel gas was produced in a downdraft gasifier. The engine generator was put on load system from 0.5 kW to 3.5 kW through a set of electrical resistances. Diesel oil consumption was measured with a precision scale. It was concluded that the engine converted to dual mode when using the gas for the gasification of wood decreased Diesel consumption by up to 57%.

Cellulase effect on anaerobic digestion of maize silage under discontinuous operation

ABSTRACT This paper studied the effect of adding an enzyme (ellulose) on anaerobic digestion of maize silage. We compared materials at chopping lengths of 8 mm (MSL), 4mm (MSS) and natural size (Ms) under a mesophilic and discontinuous operation (batch process). Hence, we found the process to be significantly influenced by particle size. Moreover, the ellulose addition did not significantly impact biogas production after a 35-day digestion period. Ms and MSS displayed an improved response to all variables when compared with MSL and MSL+C, with significant differences. Studies on the refractory fraction at infinite time (R0) have demonstrated that the lowest values correspond to Ms and MSS (0.122 and 0.155, respectively). The Kinetic approach and the Ultimate Biodegradability test are useful tools to evaluate the effect of the addition of an enzyme to the anaerobic process.

The purpose of consumer co-operation: implications for the management and governance of co-operatives

Extant research on consumer co-operation has acknowledged that the corporate purpose of consumer co-operatives deviates significantly from the purpose of investor-owned firms (IOFs – the dominant form in market economies and in theory development in the field of business economics) and also suggested that the management of consumer co-operatives differs from the management of IOFs. Despite this, there is a scarcity of research focusing on the management of consumer co-operatives in general and the ways this different purpose manifests in their management in particular. In other words, research on consumer cooperatives has only started to discover the importance of identifying the premises of these organizations and generating management and organization theories that take them into account. The overall objective of this study is to map out some of the implications that the purpose of consumer co-operation has for the management and governance of consumer co-operatives. To put it more precisely, by combining interview data gathered from Finnish consumer cooperatives (S Group, OP Bank Group and POP Bank) and extant literature, this study aims to generate or elaborate on definitions and outlines of the features that co-operative purpose poses for the strategic management, governance and managerial competence needed for consumer co-operatives. The study consists of two parts. The first part introduces the research topic, methods and publications, as well as discusses the overall outcomes. The second part consists of four publications that address the research questions from different viewpoints. The analyses of this study indicate that due to the purpose of consumer co-operation, the roles of locality and regionality become emphasized in their management. While locality and regionality are potential sources of competitive advantage for consumer co-operatives, geographic boundness sets significant boundary conditions for the strategic management of these organizations. Further, the purpose of consumer co-operation may pose several challenges to governance and set specific competence demands for the managers of these organizations. Associating the observations from various streams of research on management and governance with the purpose of consumer co-operation and examining these issues further, the thesis contributes to elaboration of theory in the field. While the thesis is by no means comprehensive (but instead reflects a co-operative research project in its early stages), it does shed light on some key ideas of management and governance and offers leads to theory and, thereby, will prove useful to elaborators, disseminators and appliers of knowledge on co-operation.

Automatic system identification and optimization of centrifugal pump operation

Centrifugal pumps are a notable end-consumer of electrical energy. Typical application of a centrifugal pump is the filling or emptying of a reservoir tank, where the pump is often operated at a constant speed until the process is completed. Installing a frequency converter to control the motor substitutes the traditional fixed-speed pumping system, allows the optimization of rotational speed profile for the pumping tasks and enables the estimation of rotational speed and shaft torque of an induction motor without any additional measurements from the motor shaft. Utilization of variable-speed operation provides the possibility to decrease the overall energy consumption of the pumping task. The static head of the pumping process may change during the pumping task. In such systems, the minimum rotational speed changes during reservoir filling or emptying, and the minimum energy consumption can’t be achieved with a fixed rotational speed. This thesis presents embedded algorithms to automatically identify, optimize and monitor pumping processes between supply and destination reservoirs, and evaluates the changing static head –based optimization method.

Mapping the translation needs and practices in development co-operation projects of NGOs

Tämän pro gradu -tutkielman aiheena on kääntäminen ja viestintä vieraalla kielellä Suomen ulkoasiainministeriön rahoittamissa kansalaisjärjestöjen kehitysyhteistyöhankkeissa. Tutkielman on tarkoitus kartoittaa kyseisten kehitysyhteistyöhankkeiden kääntämiseen ja vieraskieliseen viestintään liittyviä tarpeita ja -käytäntöjä. Aihetta ei ole tutkittu laajasti muutoin, joten empiirinen osuus on erityisen merkittävässä roolissa. Tutkielman alussa esitellään ulkoasiainministeriön laatimia suomalaisten kansalaisjärjestöjen kehitysyhteistyöhankkeiden ehtoja ja ohjeita, jotka ovat kyseiselle tutkimukselle olennaisia. Tutkielman teoreettinen osuus koostuu lähinnä metodologisesta pohdinnasta, koska aiempaa tutkimustietoa on vähän. Tutkimusmetodien analysointia on painotettu myös siksi, että empiirisellä osuudella on niin suuri merkitys. Tutkielman empiirinen aineisto on yhtäältä peräisin tutkijan havainnoista, jotka saatiin omia varhaisempia hankehallinnointikokemuksia hyödyntäen sekä osallistuvan havainnoinnin menetelmää käyttäen kahden opiskelijajärjestön kehitysyhteistyöhankkeista vuosien 2009 ja 2012 välisenä aikana. Toisaalta aineisto on kerätty kyselytutkimuksen vastauksista. Kysely lähetettiin 35 suomalaiselle kansalaisjärjestölle, joiden kehitysyhteistyöhankkeita Suomen ulkoasiainministeriö rahoittaa. Järjestöt valittiin satunnaisotannalla. Empiirisen aineiston analyysistä ilmeni muun muassa, että tutkijan alkuperäinen hypoteesi kehitysyhteistyöhön liittyvien tekstien kääntämisen yleisyydestä pitää osittain paikkansa, vaikka tekstejä käännettiinkin kansalaisjärjestöissä vähemmän kuin tutkija odotti. Tutkimusaineisto ei ole kuitenkaan tarpeeksi laaja, jotta tuloksia voitaisiin yleistää, sillä kansalaisjärjestöt, niiden hankkeet, käännöstarpeet ja asiantuntemus osoittautuivat odotetusti hyvin erilaisiksi. Tulokset sisältävät asiaa myös esimerkiksi järjestöissä kääntävien ja vieraalla kielellä viestivien taustoista. Jatkotutkimukset ovat kuitenkin tarpeen, ja mahdollisia tutkimusaiheita on runsaasti.

Value added logistics in supply and demand chain : COSTFIX : New operation model for maintenance material logistics in paper industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases – a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcing services in order to improve its investment productivity. The mechanism of how these services affect the customer company’s investment productivity is illustrated.

Design and testing of an armature-reaction-compensated permanent magnet synchronous generator for island operation

At present, permanent magnet synchronous generators (PMSGs) are of great interest. Since they do not have electrical excitation losses, the highly efficient, lightweight and compact PMSGs equipped with damper windings work perfectly when connected to a network. However, in island operation, the generator (or parallel generators) alone is responsible for the building up of the network and maintaining its voltage and reactive power level. Thus, in island operation, a PMSG faces very tight constraints, which are difficult to meet, because the flux produced by the permanent magnets (PMs) is constant and the voltage of the generator cannot be controlled. Traditional electrically excited synchronous generators (EESGs) can easily meet these constraints, because the field winding current is controllable. The main drawback of the conventional EESG is the relatively high excitation loss. This doctoral thesis presents a study of an alternative solution termed as a hybrid excitation synchronous generator (HESG). HESGs are a special class of electrical machines, where the total rotor current linkage is produced by the simultaneous action of two different excitation sources: the electrical and permanent magnet (PM) excitation. An overview of the existing HESGs is given. Several HESGs are introduced and compared with the conventional EESG from technical and economic points of view. In the study, the armature-reaction-compensated permanent magnet synchronous generator with alternated current linkages (ARC-PMSG with ACL) showed a better performance than the other options. Therefore, this machine type is studied in more detail. An electromagnetic design and a thermal analysis are presented. To verify the operation principle and the electromagnetic design, a down-sized prototype of 69 kVA apparent power was built. The experimental results are demonstrated and compared with the predicted ones. A prerequisite for an ARC-PMSG with ACL is an even number of pole pairs (p = 2, 4, 6, …) in the machine. Naturally, the HESG technology is not limited to even-pole-pair machines. However, the analysis of machines with p = 3, 5, 7, … becomes more complicated, especially if analytical tools are used, and is outside the scope of this thesis. The contribution of this study is to propose a solution where an ARC-PMSG replaces an EESG in electrical power generation while meeting all the requirements set for generators given for instance by ship classification societies, particularly as regards island operation. The maximum power level when applying the technology studied here is mainly limited by the economy of the machine. The larger the machine is, the smaller is the efficiency benefit. However, it seems that machines up to ten megawatts of power could benefit from the technology. However, in low-power applications, for instance in the 500 kW range, the efficiency increase can be significant.