The Demand for Power Diffusion: A Case Study of the 2005 Constitutional Referendum Voting in Kenya

Recent studies on the history of economic development demonstrate that concentration of power on a monarch or a ruling coalition impedes economic growth and that institutional changes that diffuse power, though beneficial to the society in general, are opposed by some social groups. In November 2005, Kenyans rejected a proposed constitution primarily because it did not reduce the powers of the executive to any significant degree. Using data of voting patterns in the constitutional referendum and following the rational choice framework, I estimate a model of the demand for power diffusion and demonstrate that groups voting decisions depend on expected gains and likelihood of monopolizing power. The results also reveal the importance of ethnic divisions in hindering the power diffusion process, and therefore the study establishes a channel through which ethnic fragmentation impacts on economic development.

Is the Median Voter Decisive? Evidence of 'Ends Against the Middle' From Referenda Voting Patterns

This paper examines whether the voter with the median income is decisive in local spending decisions. Previous tests have relied on cross-sectional data while we make use of a pair of California referenda to estimate a first difference specification. The referenda proposed to lower the required vote share for passing local educational bonding initiatives from 67 to 50 percent and 67 to 55 percent, respectively. We find that voters rationally consider future public service decisions when deciding how to vote on voting rules, but the empirical evidence strongly suggests that an income percentile below the median is decisive for majority voting rules. This finding is consistent with high income voters with weak demand for public educational services voting with the poor against increases in public spending on education.

Tribalism as a Minimax-Regret Strategy: Evidence from Voting in the 2007 Kenyan Elections

Although many studies find that voting in Africa approximates an ethnic census in that voting is primarily along ethnic lines, hardly any of the studies have sought to explain ethnic voting following a rational choice framework. Using data of voter opinions from a survey conducted two weeks before the December 2007 Kenyan elections, we find that the expected benefits associated with a win by each of the presidential candidates varied significantly across voters from different ethnic groups. We hypothesize that decision to participate in the elections was influenced by the expected benefits as per the minimax-regret voting model. We test the predictions of this model using data of voter turnout in the December 2007 elections and find that turnout across ethnic groups varied systematically with expected benefits. The results suggest that individuals participated in the elections primarily to avoid the maximum regret should a candidate from another ethnic group win. The results therefore offer credence to the minimax regret model as proposed by Ferejohn and Fiorina (1974) and refute the Downsian expected utility model.

Using GIS methods to assess the occurrence of neural tube defect births by residential proximity at conception to hazardous waste sites

In the United States, approximately 4,000 pregnancies each year are affected by the two most common birth defects, spina bifida and anencephaly. Studies have shown that exposure to environmental chemicals before and after conception may adversely affect reproduction by inducing cell death or dysfunction, which leads to infertility, fetal loss, lowered weight at birth, or birth anomalies in the offspring. The objective of the study was to evaluate the relationship between Neural Tube Defect births and residence at conception in proximity to hazardous waste sites in the Texas-Mexico border region between 1993 and 2000. ^ The study design was a nested matched case-control and utilized secondary data from a project, “The role of chemical and biological factors in the etiology of neural tube birth defects births along the Texas-Mexico Border” (Irina Cech, Principal Investigator). Geographic Information Systems (GIS) database methods were used to compare Neural Tube Defects cases to controls on status of conception residence occurring within a one-mile radius from hazardous waste sites, as compared to conception residence further away. Information on the exposures was obtained from the OnTarget Database and Environment Protection Agency website. Conditional logistic regression was used for the matched case-control study to investigate the relationship between an outcome of being a case or a control and proximity to hazardous waste sites. ^ The result of the study showed a 36 percent non-significant increased risk of having an NTD birth associated with maternal proximity to abandoned hazardous waste sites (95% CI = 0.62–3.02). In addition, there was a 24% non-significant elevated risk of having an NTD birth when living in proximity to air pollutant sites than when living further away (95% CI = 0.67–2.32). Although this study did not find statistically significant associations, it will expand on the existing knowledge of the relationship between NTD and proximity to hazardous waste sites. ^

The Effect of Proximity, Explicitness, and Representation of Basic Science Information on Student Clinical Problem-Solving

Problem: Medical and veterinary students memorize facts but then have difficulty applying those facts in clinical problem solving. Cognitive engineering research suggests that the inability of medical and veterinary students to infer concepts from facts may be due in part to specific features of how information is represented and organized in educational materials. First, physical separation of pieces of information may increase the cognitive load on the student. Second, information that is necessary but not explicitly stated may also contribute to the student’s cognitive load. Finally, the types of representations – textual or graphical – may also support or hinder the student’s learning process. This may explain why students have difficulty applying biomedical facts in clinical problem solving. Purpose: To test the hypothesis that three specific aspects of expository text – the patial distance between the facts needed to infer a rule, the explicitness of information, and the format of representation – affected the ability of students to solve clinical problems. Setting: The study was conducted in the parasitology laboratory of a college of veterinary medicine in Texas. Sample: The study subjects were a convenience sample consisting of 132 second-year veterinary students who matriculated in 2007. The age of this class upon admission ranged from 20-52, and the gender makeup of this class consisted of approximately 75% females and 25% males. Results: No statistically significant difference in student ability to solve clinical problems was found when relevant facts were placed in proximity, nor when an explicit rule was stated. Further, no statistically significant difference in student ability to solve clinical problems was found when students were given different representations of material, including tables and concept maps. Findings: The findings from this study indicate that the three properties investigated – proximity, explicitness, and representation – had no statistically significant effect on student learning as it relates to clinical problem-solving ability. However, ad hoc observations as well as findings from other researchers suggest that the subjects were probably using rote learning techniques such as memorization, and therefore were not attempting to infer relationships from the factual material in the interventions, unless they were specifically prompted to look for patterns. A serendipitous finding unrelated to the study hypothesis was that those subjects who correctly answered questions regarding functional (non-morphologic) properties, such as mode of transmission and intermediate host, at the family taxonomic level were significantly more likely to correctly answer clinical case scenarios than were subjects who did not correctly answer questions regarding functional properties. These findings suggest a strong relationship (p < .001) between well-organized knowledge of taxonomic functional properties and clinical problem solving ability. Recommendations: Further study should be undertaken investigating the relationship between knowledge of functional taxonomic properties and clinical problem solving ability. In addition, the effect of prompting students to look for patterns in instructional material, followed by the effect of factors that affect cognitive load such as proximity, explicitness, and representation, should be explored.

Retrospective Voting in Turkey: Macro and Micro Perspectives

Recent studies have shown that party systems in emerging democracies do not always adequately reflect the various cleavages of society. Under such circumstances, retrospective voting may play a more important role than cleavage voting in determining electoral outcomes. For studies of retrospective voting, the choice between macro and micro level as the independent variable is a major methodological issue. Using individual-level data on Turkey, this paper addresses two major questions: (1) Are voters' decisions based on household economic conditions or national economic conditions? Do sociopolitical conditions also count? (2) Does the future evaluation of the economy affect voting decisions apart from past evaluation? Logit models are used in this research to answer these questions.

Economic voting and electoral volatility in Turkish provinces

Two groups of questions were addressed in this paper: (1) Is voter punishment of the incumbent the primary factor in electoral volatility? Are there any other types of vote swings that underlie volatility? (2) In general, does a decline in economic growth destabilize voter behavior? If so, what kinds of vote swings does an economic downturn tend to generate? Provincial-level panel data analysis yielded the following results: (1) Changes in volatility is primarily due to vote swings from the incumbent to the opposition and also to and from left-wing and right-wing parties. (2) Lower economic growth increases electoral volatility. Economic decline induces vote swings not only from the government to the opposition but also from left-wing to right-wing parties. This is probably because right-wing parties seem more concerned with economic issues and are thus more popular than left-wing parties with lower-income voters.

A Critical Review of Opinion Polls relating to Iranian Voting Intentions: Problems of Research Methodology as applied to Complex Societies

After the 10th Iranian Presidential election on June 12, 2009, several public opinion polls taken in Iran attracted the attention of policy-makers and journalists around the world because of the political crisis that followed. In this paper I first review critically the polls conducted by the WPO (WorldPublicOpinion.org), PIPA (Program on International Policy Attitudes) at the University of Maryland. I also review an essay by Steven Kull, which is based on the aforementioned poll results and which in my opinion leads to false conclusions concerning Iran’s political prospects. I also discuss “An Analysis of Multiple Polls of the Iranian Public,” published by WPO-PIPA on February 3 2010. The present paper arrives at the overall conclusion that it is impossible to obtain an accurate image of political opinions in societies as complicated as that of Iran by concentrating on only one technique of research and analysis, especially when the political and social situation in the society concerned is in a state of constant flux.

Non-economic voting and incumbent strength in Turkey

Evidence suggests that incumbent parties find it harder to be re-elected in emerging than in advanced democracies because of more serious economic problems in the former. Yet the pro-Islamic Justice and Development Party (AKP) has ruled Turkey since 2002. Does economic performance sufficiently account for the electoral strength of the AKP government? Reliance on economic performance alone to gain public support makes a government vulnerable to economic fluctuations. This study includes time-series regressions for the period 1950-2011 in Turkey and demonstrates that even among Turkey's long-lasting governments, the AKP has particular electoral strength that cannot be adequately explained by economic performance.

Voting behavior in Indonesia from 1999 to 2014 : religious cleavage or economic performance?

In this study, we examine the voting behavior in Indonesian parliamentary elections from 1999 to 2014. After summarizing the changes in Indonesian parties' share of the vote from a historical standpoint, we investigate the voting behavior with simple regression models to analyze the effect of regional characteristics on Islamic/secular parties' vote share, using aggregated panel data at the district level. Then, we also test the hypothesis of retrospective economic voting. The results show that districts which formerly stood strongly behind Islamic parties continued to select those parties, or gave preference to abstention over the parties in some elections. From the point of view of retrospective economic voting, we found that districts which experienced higher per capita economic growth gave more support to the ruling parties, although our results remain tentative because information on 2014 is not yet available.

Applications for wireless sensor networks : tracking with binary proximity sensors

El interés cada vez mayor por las redes de sensores inalámbricos pueden ser entendido simplemente pensando en lo que esencialmente son: un gran número de pequeños nodos sensores autoalimentados que recogen información o detectan eventos especiales y se comunican de manera inalámbrica, con el objetivo final de entregar sus datos procesados a una estación base. Los nodos sensores están densamente desplegados dentro del área de interés, se pueden desplegar al azar y tienen capacidad de cooperación. Por lo general, estos dispositivos son pequeños y de bajo costo, de modo que pueden ser producidos y desplegados en gran numero aunque sus recursos en términos de energía, memoria, velocidad de cálculo y ancho de banda están enormemente limitados. Detección, tratamiento y comunicación son tres elementos clave cuya combinación en un pequeño dispositivo permite lograr un gran número de aplicaciones. Las redes de sensores proporcionan oportunidades sin fin, pero al mismo tiempo plantean retos formidables, tales como lograr el máximo rendimiento de una energía que es escasa y por lo general un recurso no renovable. Sin embargo, los recientes avances en la integración a gran escala, integrado de hardware de computación, comunicaciones, y en general, la convergencia de la informática y las comunicaciones, están haciendo de esta tecnología emergente una realidad. Del mismo modo, los avances en la nanotecnología están empezando a hacer que todo gire entorno a las redes de pequeños sensores y actuadores distribuidos. Hay diferentes tipos de sensores tales como sensores de presión, acelerómetros, cámaras, sensores térmicos o un simple micrófono. Supervisan las condiciones presentes en diferentes lugares tales como la temperatura, humedad, el movimiento, la luminosidad, presión, composición del suelo, los niveles de ruido, la presencia o ausencia de ciertos tipos de objetos, los niveles de tensión mecánica sobre objetos adheridos y las características momentáneas tales como la velocidad , la dirección y el tamaño de un objeto, etc. Se comprobara el estado de las Redes Inalámbricas de Sensores y se revisaran los protocolos más famosos. Así mismo, se examinara la identificación por radiofrecuencia (RFID) ya que se está convirtiendo en algo actual y su presencia importante. La RFID tiene un papel crucial que desempeñar en el futuro en el mundo de los negocios y los individuos por igual. El impacto mundial que ha tenido la identificación sin cables está ejerciendo fuertes presiones en la tecnología RFID, los servicios de investigación y desarrollo, desarrollo de normas, el cumplimiento de la seguridad y la privacidad y muchos más. Su potencial económico se ha demostrado en algunos países mientras que otros están simplemente en etapas de planificación o en etapas piloto, pero aun tiene que afianzarse o desarrollarse a través de la modernización de los modelos de negocio y aplicaciones para poder tener un mayor impacto en la sociedad. Las posibles aplicaciones de redes de sensores son de interés para la mayoría de campos. La monitorización ambiental, la guerra, la educación infantil, la vigilancia, la micro-cirugía y la agricultura son solo unos pocos ejemplos de los muchísimos campos en los que tienen cabida las redes mencionadas anteriormente. Estados Unidos de América es probablemente el país que más ha investigado en esta área por lo que veremos muchas soluciones propuestas provenientes de ese país. Universidades como Berkeley, UCLA (Universidad de California, Los Ángeles) Harvard y empresas como Intel lideran dichas investigaciones. Pero no solo EE.UU. usa e investiga las redes de sensores inalámbricos. La Universidad de Southampton, por ejemplo, está desarrollando una tecnología para monitorear el comportamiento de los glaciares mediante redes de sensores que contribuyen a la investigación fundamental en glaciología y de las redes de sensores inalámbricos. Así mismo, Coalesenses GmbH (Alemania) y Zurich ETH están trabajando en diversas aplicaciones para redes de sensores inalámbricos en numerosas áreas. Una solución española será la elegida para ser examinada más a fondo por ser innovadora, adaptable y polivalente. Este estudio del sensor se ha centrado principalmente en aplicaciones de tráfico, pero no se puede olvidar la lista de más de 50 aplicaciones diferentes que ha sido publicada por la firma creadora de este sensor específico. En la actualidad hay muchas tecnologías de vigilancia de vehículos, incluidos los sensores de bucle, cámaras de video, sensores de imagen, sensores infrarrojos, radares de microondas, GPS, etc. El rendimiento es aceptable, pero no suficiente, debido a su limitada cobertura y caros costos de implementación y mantenimiento, especialmente este ultimo. Tienen defectos tales como: línea de visión, baja exactitud, dependen mucho del ambiente y del clima, no se puede realizar trabajos de mantenimiento sin interrumpir las mediciones, la noche puede condicionar muchos de ellos, tienen altos costos de instalación y mantenimiento, etc. Por consiguiente, en las aplicaciones reales de circulación, los datos recibidos son insuficientes o malos en términos de tiempo real debido al escaso número de detectores y su costo. Con el aumento de vehículos en las redes viales urbanas las tecnologías de detección de vehículos se enfrentan a nuevas exigencias. Las redes de sensores inalámbricos son actualmente una de las tecnologías más avanzadas y una revolución en la detección de información remota y en las aplicaciones de recogida. Las perspectivas de aplicación en el sistema inteligente de transporte son muy amplias. Con este fin se ha desarrollado un programa de localización de objetivos y recuento utilizando una red de sensores binarios. Esto permite que el sensor necesite mucha menos energía durante la transmisión de información y que los dispositivos sean más independientes con el fin de tener un mejor control de tráfico. La aplicación se centra en la eficacia de la colaboración de los sensores en el seguimiento más que en los protocolos de comunicación utilizados por los nodos sensores. Las operaciones de salida y retorno en las vacaciones son un buen ejemplo de por qué es necesario llevar la cuenta de los coches en las carreteras. Para ello se ha desarrollado una simulación en Matlab con el objetivo localizar objetivos y contarlos con una red de sensores binarios. Dicho programa se podría implementar en el sensor que Libelium, la empresa creadora del sensor que se examinara concienzudamente, ha desarrollado. Esto permitiría que el aparato necesitase mucha menos energía durante la transmisión de información y los dispositivos sean más independientes. Los prometedores resultados obtenidos indican que los sensores de proximidad binarios pueden formar la base de una arquitectura robusta para la vigilancia de áreas amplias y para el seguimiento de objetivos. Cuando el movimiento de dichos objetivos es suficientemente suave, no tiene cambios bruscos de trayectoria, el algoritmo ClusterTrack proporciona un rendimiento excelente en términos de identificación y seguimiento de trayectorias los objetos designados como blancos. Este algoritmo podría, por supuesto, ser utilizado para numerosas aplicaciones y se podría seguir esta línea de trabajo para futuras investigaciones. No es sorprendente que las redes de sensores de binarios de proximidad hayan atraído mucha atención últimamente ya que, a pesar de la información mínima de un sensor de proximidad binario proporciona, las redes de este tipo pueden realizar un seguimiento de todo tipo de objetivos con la precisión suficiente. Abstract The increasing interest in wireless sensor networks can be promptly understood simply by thinking about what they essentially are: a large number of small sensing self-powered nodes which gather information or detect special events and communicate in a wireless fashion, with the end goal of handing their processed data to a base station. The sensor nodes are densely deployed inside the phenomenon, they deploy random and have cooperative capabilities. Usually these devices are small and inexpensive, so that they can be produced and deployed in large numbers, and so their resources in terms of energy, memory, computational speed and bandwidth are severely constrained. Sensing, processing and communication are three key elements whose combination in one tiny device gives rise to a vast number of applications. Sensor networks provide endless opportunities, but at the same time pose formidable challenges, such as the fact that energy is a scarce and usually non-renewable resource. However, recent advances in low power Very Large Scale Integration, embedded computing, communication hardware, and in general, the convergence of computing and communications, are making this emerging technology a reality. Likewise, advances in nanotechnology and Micro Electro-Mechanical Systems are pushing toward networks of tiny distributed sensors and actuators. There are different sensors such as pressure, accelerometer, camera, thermal, and microphone. They monitor conditions at different locations, such as temperature, humidity, vehicular movement, lightning condition, pressure, soil makeup, noise levels, the presence or absence of certain kinds of objects, mechanical stress levels on attached objects, the current characteristics such as speed, direction and size of an object, etc. The state of Wireless Sensor Networks will be checked and the most famous protocols reviewed. As Radio Frequency Identification (RFID) is becoming extremely present and important nowadays, it will be examined as well. RFID has a crucial role to play in business and for individuals alike going forward. The impact of ‘wireless’ identification is exerting strong pressures in RFID technology and services research and development, standards development, security compliance and privacy, and many more. The economic value is proven in some countries while others are just on the verge of planning or in pilot stages, but the wider spread of usage has yet to take hold or unfold through the modernisation of business models and applications. Possible applications of sensor networks are of interest to the most diverse fields. Environmental monitoring, warfare, child education, surveillance, micro-surgery, and agriculture are only a few examples. Some real hardware applications in the United States of America will be checked as it is probably the country that has investigated most in this area. Universities like Berkeley, UCLA (University of California, Los Angeles) Harvard and enterprises such as Intel are leading those investigations. But not just USA has been using and investigating wireless sensor networks. University of Southampton e.g. is to develop technology to monitor glacier behaviour using sensor networks contributing to fundamental research in glaciology and wireless sensor networks. Coalesenses GmbH (Germany) and ETH Zurich are working in applying wireless sensor networks in many different areas too. A Spanish solution will be the one examined more thoroughly for being innovative, adaptable and multipurpose. This study of the sensor has been focused mainly to traffic applications but it cannot be forgotten the more than 50 different application compilation that has been published by this specific sensor’s firm. Currently there are many vehicle surveillance technologies including loop sensors, video cameras, image sensors, infrared sensors, microwave radar, GPS, etc. The performance is acceptable but not sufficient because of their limited coverage and expensive costs of implementation and maintenance, specially the last one. They have defects such as: line-ofsight, low exactness, depending on environment and weather, cannot perform no-stop work whether daytime or night, high costs for installation and maintenance, etc. Consequently, in actual traffic applications the received data is insufficient or bad in terms of real-time owed to detector quantity and cost. With the increase of vehicle in urban road networks, the vehicle detection technologies are confronted with new requirements. Wireless sensor network is the state of the art technology and a revolution in remote information sensing and collection applications. It has broad prospect of application in intelligent transportation system. An application for target tracking and counting using a network of binary sensors has been developed. This would allow the appliance to spend much less energy when transmitting information and to make more independent devices in order to have a better traffic control. The application is focused on the efficacy of collaborative tracking rather than on the communication protocols used by the sensor nodes. Holiday crowds are a good case in which it is necessary to keep count of the cars on the roads. To this end a Matlab simulation has been produced for target tracking and counting using a network of binary sensors that e.g. could be implemented in Libelium’s solution. Libelium is the enterprise that has developed the sensor that will be deeply examined. This would allow the appliance to spend much less energy when transmitting information and to make more independent devices. The promising results obtained indicate that binary proximity sensors can form the basis for a robust architecture for wide area surveillance and tracking. When the target paths are smooth enough ClusterTrack particle filter algorithm gives excellent performance in terms of identifying and tracking different target trajectories. This algorithm could, of course, be used for different applications and that could be done in future researches. It is not surprising that binary proximity sensor networks have attracted a lot of attention lately. Despite the minimal information a binary proximity sensor provides, networks of these sensing modalities can track all kinds of different targets classes accurate enough.

Analysis of electronic and telematic voting systems in binding experiences

This paper is about analysis and assess of three experiences on telematic and electronic voting dealing with such aspects as security and achievement of the social requirements. These experiences have been chosen taking into account the deepness of the public documentation and the technological challenge they faces.

Use of Java Cards in a telematic voting system.

This paper presents a general view of the telematic voting system developed by its authors, with a special emphasis on the important role that smart cards play in this scenario. The use of smart cards as basic pieces for providing secure cryptographic operations in this type of voting scheme is justified. The differences and advantages of Java Cards in comparison with the ?classical? smart cards (those that completely conform to the ISO/IEC 7816 standard) are also discussed. As an example, the paper describes one of the applets implemented in the voting Java Card as part of the general telematic voting application.

VOTESCRIPT: Telematic voting system designed to enable final count verification

In this paper we present a global description of a telematic voting system based on advanced cryptography and on the use of smart cards (VOTESCRIPT system) whose most outstanding characteristic is the ability to verify that the tally carried out by the system is correct, meaning that the results published by the system correspond with votes cast. The VOTESCRIPT system provides an individual verification mechanism allowing each Voter to confirm whether his vote has been correctly counted. The innovation with respect to other solutions lies in the fact that the verification process is private so that Voters have no way of proving what they voted in the presence of a non-authorized third party. Vote buying and selling or any other kind of extortion are prevented. The existence of the Intervention Systems allows the whole electoral process to be controlled by groups of citizens or authorized candidatures. In addition to this the system can simply make an audit not only of the final results, but also of the whole process. Global verification provides the Scrutineers with robust cryptographic evidence which enables unequivocal proof if the system has operated in a fraudulent way.

Contributions to traditional electronic voting systems in order to reinforce citizen confidence

This document provides a general description of the telematic voting scenario designed by the author?s research group. This scenario reinforces verification procedures as key elements to achieve full acceptance of the system on the part of voters. To frame this work, a general overview of electronic voting is given and the conditions entailed by these systems are specified.