Sistema Aldeia : programação paralela e distribuída em Java sobre Infiniband e DECK

Esse trabalho de dissertação está incluído no contexto das pesquisas realizadas no Grupo de Processamento Paralelo e Distribuído da UFRGS. Ele aborda as áreas da computação de alto desempenho, interfaces simples de programação e de sistemas de interconexão de redes velozes. A máquina paralela formada por agregados (clusters) tem se destacado por apresentar os recursos computacionais necessários às aplicações intensivas que necessitam de alto desempenho. Referente a interfaces de programação, Java tem se mostrado uma boa opção para a escrita de aplicações paralelas por oferecer os sistemas de RMI e de soquetes que realizam comunicação entre dois computadores, além de todas as facilidades da orientação a objetos. Na área a respeito de interconexão de rede velozes está emergindo como uma tentativa de padronização a nova tecnologia Infiniband. Ela proporciona uma baixa latência de comunicação e uma alta vazão de dados, além de uma série de vantagens implementadas diretamente no hardware. É neste contexto que se desenvolve o presente trabalho de dissertação de mestrado. O seu tema principal é o sistema Aldeia que reimplementa a interface bastante conhecida de soquetes Java para realizar comunicação assíncrona em agregados formados por redes de sistema. Em especial, o seu foco é redes configuradas com equipamentos Infiniband. O Aldeia objetiva assim preencher a lacuna de desempenho do sistema padrão de soquetes Java, que além de usar TCP/IP possui um caráter síncrono. Além de Infiniband, o Aldeia também procura usufruir dos avanços já realizados na biblioteca DECK, desenvolvida no GPPD da UFRGS. Com a sua adoção, é possível realizar comunicação com uma interface Java sobre redes Myrinet, SCI, além de TCP/IP. Somada a essa vantagem, a utilização do DECK também proporciona a propriedade de geração de rastros para a depuração de programas paralelos escritos com o Aldeia. Uma das grandes vantagens do Aldeia está na sua capacidade de transmitir dados assincronamente. Usando essa técnica, cálculos da aplicação podem ser realizados concorrentemente com as operações pela rede. Por fim, os canais de dados do Aldeia substituem perfeitamente aqueles utilizados para a serialização de objetos. Nesse mesmo caminho, o Aldeia pode ser integrado à sistemas que utilizem a implementação de soquetes Java, agora para operar sobre redes de alta velocidade. Palavras-chave: Arquitetura Infiniband, agregado de computadores, linguagem de programação Java, alto desempenho, interface de programação.

O desenvolvimento da linguagem escrita em crianças consideradas "deficientes mentais", em Macapá

Com base na prática da Divisão de Educação Especial e do Sistema Educacional Público do Estado do Amapá em relaçao às crianças que anualmente ingressam neste sistema, iniciando seu processo de escolarização, procedemos a análise dos mecanismos de seleção, exclusão e permanência que se instalam, tomando como ponto de partida o sucesso ou fracasso da escola em compreender o desenvolvimento da linguagem escrita em criancas na 1a sérle do 1o grau e as consequentes implicações subjacentes às concepções adotadas sobre este processo. Fundamentando teoricamente tal análise, procede-se a discussão acerca do aparelho escolar enquanto instância de reprodução e manutenção do modo hierarquizado adotado pelo modelo capitalista de produção e a consequente aceitação desta condição como processo natural. Contrapondo o critério de legitimação da incapacidade ou "deficiência" de crianças e adolescentes das camadas populares em desenvolver de modo "regular" seu processo de construção da leitura e escrita, apresentamos as contribuições de Vygotsky, Luria e Ferreiro que tratam a questão com base na interação aluno X linguagem escrita enquanto sujeito X objeto cultural, apresentando niveis de desenvolvimento de escrita obtidos junto a crianças consideradas "normais". Partindo desta última concepção, realizou-se estudo com 16 sujeitos considerados "deficientes mentais", para obter dados a respeito dos niveis evolutivoe deste processo, a fim de identificar as possíveis semelhançase e diferenças entre os grupos "deficientes" e os realizados com " normais" . De acordo com dados obtidos observa-se que crianças consideradas "deficientes mentais, neste estudo, desenvolvem linguagem escrita em niveis semelhantes aos encontrados em crianças consideradas "normais " nos estudos realizados por Luria e Ferreiro. Os resultados servirão de suporte para repensar a proposta da Educação Eepecial em conceituar e atender "deficiência mental", bem como, da Secretaria de Educação acerca do significado de alfabetização.

ConTXT : contexto como fator de adaptação em dispositivos de computação móvel

Esta tese apresenta uma arquitetura de Sumarização Automática de Textos Consciente de Contexto que visa contribuir como fator de adaptação em dispositivos de computação móvel. O processo de sumarização proposto baseia-se em informações contextuais, especificamente localização espacial, temporalidade e perfis de usuário, em uma extensão do algoritmo de sumarização extrativa TF-ISF pela inclusão de níveis de relevância adicionais representados por Palavras-Contextuais. A necessidade de adaptação no processo de visualização de textos em dispositivos de computação móvel advém tanto do crescimento da disponibilização de informações em redes de computadores sem fio quanto das características e restrições intrínsecas da plataforma computacional móvel, bem como da baixa capacidade de armazenamento e processamento e interfaces restritas em termos de tamanho e possibilidades de interação. Como um dos possíveis fatores de adaptação sugere-se a utilização da sumarização automática de textos. Esta possibilita a seleção e apresentação das sentenças consideradas mais relevantes dos documentos originais produzindo, com isso, documentos compactos e mais apropriados para a materialização em dispositivos móveis. Entretanto, considera-se que os métodos de sumarização automática atualmente disponíveis na literatura não atendem plenamente a questão proposta porque não consideram, quando do processo de sumarização, as importantes informações contextuais fornecidas pela computação móvel. Como resultado do processo proposto de adaptação através da Sumarização Consciente de Contexto espera-se que os extratos obtidos sejam mais úteis aos usuários dos dispositivos de computação móvel pela sua maior adequação tanto ao contexto quanto ao perfil, bem como da efetiva consideração das limitações intrínsecas a estes. Esta solução visa contribuir fortemente para a disponibilização de informações adequadas e personalizadas, no momento oportuno, para o local adequado.

Avaliação Pós-Ocupação da iluminação natural das salas dos setores de aulas teóricas da Universidade Federal do Rio Grande do Norte

The objective of this study is to assess the natural light of the classrooms sectors, at Universidade Federal do Rio Grande do Norte. It was applied the Post-Occupation Evaluation technique, by using questionnaires and brightness levels measurements inside the classrooms. In order to check the users satisfaction degree, it was initially done a general approach on the related aspects to natural light: their characteristics, availability, sources, opening systems and evaluating tools. It was also determined the necessary brightness levels for the activities development in the classroom and the Post-Occupation Evaluation technique used in the search analyses. Then, it was made the UFRN Campus` characterization; the models` definition which formed the data collection basis; the detailing of the procedures used in the research, the processing description and the data analysis. Subsequently, the results that clarify the issues raised were shown through quantitative and / or qualitative data analyses. This research notes a high level of satisfaction by the users, despite some problems such as the reflections occurrence on the board, the lack of uniformity and, occasionally, the brightness low levels

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Estudo do efeito da adição da escória de aciaria no processamento e propriedades finais de telhas cerâmicas

This research presents an overview of the addition steelwork dust of ceramic shingles in order to contribute to the utilization use of such residue. The ceramic industry perspective in the Brazilian State of Piauí is quite promising. Unlike other productive sectors, the ceramic industry uses basically natural raw materials. Its final products are, in short, the result of transforming clay compounds. These raw materials are composed primarily of aluminum oxide, silicon, iron, sodium, magnesium, end calcium, among others. It was verified that steelwork dust is composed primarily of these same oxides, so that its incorporation in to structural ceramics is a very reasonable idea. Both clay and steelwork powder were characterized by AG, XRF, XRD, TGA and DTA. In addition, steelwork dust samples containing (0%, 5%, 10%, 15%, 20% and 25%) were extruded and burned at 800°C, 850°C, 900°C and 950°C. Then t echnological tests of linear shrinkage, water uptake, apparent porosity, apparent density and flexural strengthwere carried at. The results showed the possibility of using steelwork powder in ceramic shingles until 15% significant improvement in physical and mechanical properties. This behavior shows the possibility of burning at temperatures lower than 850ºC, thus promoting a product final cost reduction

Estudo da molhabilidade de tecidos 100% poliéster tratados em plasma N2/O2 em função do seu envelhecimento natural

This work reports the influence of the poly (ethylene terephthalate) textile surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min. Other parameters, such as working gas composition and treatment time, were modified as the following: to the O2 plasma modified samples only the treatment time was changed (10, 20, 30, 40, 50 and 60 minutes). To the plasma with O2 and N2 only the chemical concentrations were changed. Through Capillary tests (vertical) an increase in textile wettability was observed as well as its influence on aging time and its consequence on wettability. The surface functional groups created after plasma treatments were investigated using X-ray Photoelectron Spectroscopy (XPS). The surface topography was examined by scanning electron microscope (SEM)

Influência da substituição de areia natural por pó de pedra no comportamento mecânico, microestrutural e eletroquímico de concretos

The construction industry is one of the largest consumers of natural raw materials, and concrete is considered today the most used material wide. This accentuated consumption of natural resources has generated concern with the preservation of the environment, and has motivated various studies related to the use of resid ues, which can partially or entirely substitute, with satisfactory performance, some materials such as the aggregate, and in so doing, decrease the impact on the environment caused by the produced residues. Research has been done to better understand and improve the microstructure of concrete, as well as to understand the mechanism of corrosion in reinforced steel. In this context, this work was developed aiming at discovering the influence of the substitution of natural sand by artificial sand, with rega rd to mechanical resistance, microstructure, and durability. To obtain the electrochemical parameters, an adaptation was made to the galvanostatic electrochemical method to study the corrosion in reinforced steel. Concretes of categories 20 MPa and 40 MPa were produced, containing natural sand, and concretes of the same categories were produced with artificial sand substituting the natural sand, and with the addition of sodium nitrate and sodium chloride. Due to the use of rock dust reject (artificial sand), an evaluation was made of its environmental risk. The results indicate that the concretes of category 20 MPa present a better performance than the concrete made with natural sand, thus making it a viable substitute. For the category 40 MPa, the better performance is from the concrete containing natural sand. The adaptation of the galvanostatic electrochemical technique to the study of the corrosion of reinforced steel within concrete proved to be valid for obtaining electrochemical parameters with a high degree of reliability, considering the number of degrees of freedom

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Aplicação do método de análise hierárquica na tomada de decisão para adoção de computação em nuvem: um estudo de caso na federação das indústrias do RN

The progresses of the Internet and telecommunications have been changing the concepts of Information Technology IT, especially with regard to outsourcing services, where organizations seek cost-cutting and a better focus on the business. Along with the development of that outsourcing, a new model named Cloud Computing (CC) evolved. It proposes to migrate to the Internet both data processing and information storing. Among the key points of Cloud Computing are included cost-cutting, benefits, risks and the IT paradigms changes. Nonetheless, the adoption of that model brings forth some difficulties to decision-making, by IT managers, mainly with regard to which solutions may go to the cloud, and which service providers are more appropriate to the Organization s reality. The research has as its overall aim to apply the AHP Method (Analytic Hierarchic Process) to decision-making in Cloud Computing. There to, the utilized methodology was the exploratory kind and a study of case applied to a nationwide organization (Federation of Industries of RN). The data collection was performed through two structured questionnaires answered electronically by IT technicians, and the company s Board of Directors. The analysis of the data was carried out in a qualitative and comparative way, and we utilized the software to AHP method called Web-Hipre. The results we obtained found the importance of applying the AHP method in decision-making towards the adoption of Cloud Computing, mainly because on the occasion the research was carried out the studied company already showed interest and necessity in adopting CC, considering the internal problems with infrastructure and availability of information that the company faces nowadays. The organization sought to adopt CC, however, it had doubt regarding the cloud model and which service provider would better meet their real necessities. The application of the AHP, then, worked as a guiding tool to the choice of the best alternative, which points out the Hybrid Cloud as the ideal choice to start off in Cloud Computing. Considering the following aspects: the layer of Infrastructure as a Service IaaS (Processing and Storage) must stay partly on the Public Cloud and partly in the Private Cloud; the layer of Platform as a Service PaaS (Software Developing and Testing) had preference for the Private Cloud, and the layer of Software as a Service - SaaS (Emails/Applications) divided into emails to the Public Cloud and applications to the Private Cloud. The research also identified the important factors to hiring a Cloud Computing provider