Binding of deoxyadenylate and deoxycytidylate antibodies to double-stranded DNA

Antibodies raised against deoxyadenylate and deoxycytidylate were found to react with double stranded DNA as assessed by highly sensitive avidin-biotin microELISA. The binding was specific as it was completely inhibited by the homologous hapten. The antibodies did not react with tRNA and rRNA. These antibodies were also shown to react with supercoiled and relaxed forms of pBR322 DNA as demonstrated by gel retardation assay. ssDNA, single-stranded DNA; dsDNA, double-stranded DNA; CT DNA, calf thymus DNA; AB microELISA, avidin-biotin microELISA; dpA, deoxyadenylate; dpC, deoxycytidylate; avidin-HRP, avidin-horseradish peroxidase

Design of a Non-glycosylated Outer Domain-derived HIV-1 gp120 Immunogen That Binds to CD4 and Induces Neutralizing Antibodies

The outer domain (OD) of the HIV-1 envelope glycoprotein gp120 is an important target for vaccine design as it contains a number of conserved epitopes, including a large fraction of the CD4 binding site.Attempts to design OD-based immunogens in the past have met with little success. We report the design and characterization of an Escherichia coli-expressed OD-based immunogen (ODEC), based on the sequence of the HxBc2 strain. The ODEC-designed immunogen lacks the variable loops V1V2 and V3 and incorporates 11 designed mutations at the interface of the inner and the outer domains of gp120. Biophysical studies showed that ODEC is folded and protease-resistant, whereas ODEC lacking the designed mutations is highly aggregation-prone. In contrast to previously characterized OD constructs, ODEC bound CD4 and the broadly neutralizing antibody b12 but not the non-neutralizing antibodies b6 and F105. Upon immunization in rabbits, ODEC was highly immunogenic,and the sera showed measurable neutralization for four subtype B and one subtype C virus including two b12-resistant viruses. In contrast,sera from rabbits immunized with gp120 did not neutralize any of the viruses. ODEC is the first example of a gp120 fragment-based immunogen that yields significant neutralizing antibodies.

Elasto-plastic Cracking Analysis of Reinforced Concrete

A new elasto-plastic cracking constitutive model for reinforced concrete is presented. The nonlinear effects considered cover almost all the nonlinearities exhibited by reinforced concrete under short term monotonic loading. They include concrete cracking in tension, plasticity in compression, aggregate interlock, tension softening, elasto-plastic behavior of steel, bond-slip between concrete, and steel reinforcement and tension stiffening. A new procedure for incorporating bondslip in smeared steel elements is described. A modified Huber-Hencky-Mises failure criterion for plastic deformation of concrete, which fits the experimental results under biaxial stresses better, is proposed. Multiple cracking at Gauss points and their opening and closing are considered. Matrix expressions are developed and are incorporated in a nonlinear finite element program. After the objectivity of the model is demonstrated, the model is used to analyze two different types of problems: one, a set of four shear panels, and the other, a reinforced concrete beam without shear reinforcement. The results of the analysis agree favorably with the experimental results.

Purification of goat serum retinol-binding protein and preparation of its antibodies

The method for the purification of goat serum retinol-binding protein consists of DEAE-cellulose chromatography of the serum followed by preparative polyacrylamide disc gel electrophoresis. After electrophoresis, the retinol-binding protein containing zone is identified by the specific fluorescence of retinol. For raising the antibodies, the portion of the gel containing retinol binding protein is homogenized and injected intradermally and intramuscularly to rabbits. The availability of this simple method for the isolation of retinol-binding protein and production of its antibodies enables the development of a radioimmunoassay for this protein.

Ultra-fine Grain Materials by Severe Plastic Deformation: Application to Steels

Severe plastic deformation techniques are known to produce grain sizes up to submicron level. This leads to conventional Hall-Petch strengthening of the as-processed materials. In addition, the microstructures of severe plastic deformation processed materials are characterized by relatively lower dislocation density compared to the conventionally processed materials subjected to the same amount of strain. These two aspects taken together lead to many important attributes. Some examples are ultra-high yield and fracture strengths, superplastic formability at lower temperatures and higher strain rates, superior wear resistance, improved high cycle fatigue life. Since these processes are associated with large amount of strain, depending on the strain path, characteristic crystallographic textures develop. In the present paper, a detailed account of underlying mechanisms during SPD has been discussed and processing-microstructure-texture-property relationship has been presented with reference to a few varieties of steels that have been investigated till date.

High-Temperature (1023 K to 1273 K 750 degrees C to 1000 degrees C]) Plastic Deformation Behavior of B-Modified Ti-6Al-4V Alloys: Temperature and Strain Rate Effects

A minor addition of B to the Ti-6Al-4V alloy, by similar to 0.1 wt pct, reduces its as-cast prior beta grain size by an order of magnitude, whereas higher B content leads to the presence of in situ formed TiB needles in significant amounts. An experimental investigation into the role played by these microstructural modifications on the high-temperature deformation behavior of Ti-6Al-4V-xB alloys, with x varying between 0 wt pct and 0.55 wt pct, was conducted. Uniaxial compression tests were performed in the temperature range of 1023 K to 1273 K (750 degrees C to 1000 degrees C) and in the strain rate range of 10(-3) to 10(+1) s(-1). True stress-true strain responses of all alloys exhibit flow softening at lower strain rates and oscillations at higher strain rates. The flow softening is aided by the occurrence of dynamic recrystallization through lath globularization in high temperature (1173 K to 1273 K 900 degrees C to 1000 degrees C]) and a lower strain rate (10(-2) to 10(-3) s(-1)) regime. The grain size refinement with the B addition to Ti64, despite being marked, had no significant effect on this. Oscillations in the flow curve at a higher strain rate (10(0) to 10(+1) s(-1)), however, are associated with microstructural instabilities such as bending of laths, breaking of lath boundaries, generation of cavities, and breakage of TiB needles. The presence of TiB needles affected the instability regime. Microstructural evidence suggests that the matrix cavitation is aided by the easy fracture of TiB needles.

Mother-Infant Antibodies to Pneumococcal Polysaccharides and Proteins : Transfer and Persistence of Maternal Antibodies and Development of Vaccine-Induced and Naturally Acquired Antibodies in Infants

Symptomless nasopharyngeal carriage of Streptococcus pneumoniae (pneumococcus) is very common in young children. Occasionally the carriage proceeds into mild mucosal diseases, such as sinusitis or acute otitis media, or into serious life-threatening diseases, such as pneumonia, sepsis or meningitis. Each year, up to one million children less than five years of age worldwide die of invasive pneumococcal diseases (IPD). Especially in the low-income countries IPD is a leading health problem in infants; 75% of all IPD cases occur before one year of age. This stresses the need of increased protection against pneumococcus in infancy. Anti-pneumococcal antibodies form an important component in the defence against pneumococcal infection. Maternal immunisation and early infant immunisation are two possible ways by which potentially protective antibody concentrations against pneumococci could be achieved in early infancy. The aim of this thesis is to increase the knowledge of antibody mediated protection against pneumococcal disease in infants and young children. We investigated the transfer of maternal anti-pneumococcal antibodies from Filipino mothers to their infants, the persistence of the transferred antibodies in the infants, the immunogenicity of the 23-valent pneumococcal polysaccharide vaccine (PPV) in infants and the response of the children to a second dose of PPV at three years of age. We also investigated the development of antibodies to pneumococcal protein antigens in relation to culture-confirmed pneumococcal carriage in infants. Serum samples were collected from the mothers, the umbilical cords and from the infants at young age as well as at three years of age. The samples were used to determine the antibody concentrations to pneumococcal serotypes 1, 5, 6B, 14, 18C and 19F, as well as to the pneumococcal proteins PspA, PsaA, Ply, PspC, PhtD, PhtDC and LytC by the enzyme immunoassay. The findings of the present study confirm previously obtained results and add to the global knowledge of responses to PPV in young children. Immunising pregnant women with PPV provides the infants with increased concentrations of pneumococcal polysaccharide antibodies. Of the six serotypes examined, serotypes 1 and 5 were immunogenic already in infants. At three years of age, the children responded well to the second dose of PPV suggesting that maternal and early infant immunisations might not induce hyporesponsiveness to polysaccharide antigens after subsequent immunisations. The anti-protein antibody findings provide useful information for the development of pneumococcal protein vaccines. All six proteins studied were immunogenic in infancy and the development of anti-protein antibodies started early in life in relation to pneumococcal carriage.

Curing reactions in plastic prepolymers and propellants. I. Polystyrene

Curing reactions of the viscous PS prepolymer and PS/AP propellant slurry have been studied. The molecular weight of the binder (separated from the propellant) and the prepolymer was found to increase to a maximum value, remain constant for some time, and then fall off between 50–125°C. The molecular weight of the binder was found to be less than corresponding prepolymer between 100–150°C but at lower temperatures (50–75°C) the reverse was found to be true. The increase in the molecular weight during curing at lower temperatures has been explained on the basis of Trommsdorff effect which gets support from the estimated activation energy (9 kcal mole−1) for the curing process. Curing was recognized as chain extension where the rate of polymerization becomes diffusion controlled below 75° C.