A novel scanning lens instrument for evaluating Fresnel lens performance: equipment development and initial results

A system dedicated to the optical transmittance characterization of Fresnel lenses has been developed at NREL, in collaboration with the UPM. The system quantifies the optical efficiency of the lens by generating a performance map. The shape of the focused spot may also be analyzed to understand change in the lens performance. The primary instrument components (lasers and CCD detector) have been characterized to confirm their capability for performing optical transmittance measurements. Measurements performed on SoG and PMMA lenses subject to a variety of indoor conditions (e.g., UV and damp heat) identified differences in the optical efficiency of the evaluated lenses, demonstrating the ability of the Scanning Lens Instrument (SLI) to distinguish between the aged lenses.

Binderless thin films of zeolite-templated carbon electrodes useful for electrochemical microcapacitors with ultrahigh rate performance

Controlled nanozeolite deposits are prepared by electrochemical techniques on a macroporous carbon support and binderless thin film electrodes of zeolite-templated carbon are synthesized using the deposits as templates. The obtained film electrodes exhibit extremely high area capacitance (10–12 mF cm−2) and ultrahigh rate capability in a thin film capacitor.

Diagnostic motor vehicle inspection demonstration projects, program engineering support. Volume 9 - appendix H: vehicle designs that facilitate or hinder inspection and repair and interchangeability and interface capability of test equipment and vehicles. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Development of a visibility research capability. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

A planar UWB antenna with signal rejection capability in the 4-6 GHz band

The design of a compact planar antenna featuring ultra wideband performance and simultaneous signal rejection in the 4-6 GHz band, assigned for IEEE802.11a and HIPERLAN/2, is presented. The design is demonstrated assuming RT6010LM substrate with a relative dielectric constant of 10.2 and thickness of 0.64 mm. The presented results show that the designed antenna of 27 mm * 20 mm dimensions has a bandwidth from 2.7 GHz to more than 10 GHz excluding the rejection band. The antenna features near omnidirectional characteristics and good radiation efficiency.

Assessing the capability to acquire and absorb technology within the public sector in developing countries : the case of Kuwait

The aim of this research is to assess the acquisition and absorption technology capabilities of the public sector in developing countries, with specific focus on the State of Kuwait. The assessment process of these two capabilities was conducted using a model originally designed for the private sector. In addition, the research aims to propose a framework to enhance the technological capability of developing countries, as well as the performance of the public sector. To achieve these aims, an investigation of the technology process to three public ministries in Kuwait was conducted. The prime interest of this investigation was to evaluate the role of the transferred technology in enhancing the indigenous technological capability of the public sector. The research is based on a case study approach, comprising a main case study (Ministry of Electricity and Water) and three minor case studies. Based on the outcomes from an extensive literature review and the preliminary sectoral visits, the research question and four hypotheses were formulated. These hypotheses were then tested using interview-based survey and documentation. The findings of the research revealed the weakness of the acquisition and absorption technological capabilities of the public sector. Consequently, the public sector relies extensively on foreign contractors and expatriates to compensate for this weakness. Also, it was found that Kuwait Government has not taken the necessary measures to develop its technological capability. This research has proposed a framework which could lead, if properly managed, to the enhancement of indigenous capability. It has also proposed how to improve performance and productivity in the public sector. Finally, the findings suggest that the assessment model, with minor adjustment, is applicable to the public sector.

Export memory: a preliminary investigation of its quality, its use, and its link to export performance

Exporting is one of the main ways in which organizations internationalize. With the more turbulent, heterogeneous, sophisticated and less familiar export environment, the organizational learning ability of the exporting organization may become its only source of sustainable competitive advantage. However, achieving a competitive level of learning is not easy. Companies must be able to find ways to improve their learning capability by enhancing the different aspects of the learning process. One of these is export memory. Building from an export information processing framework this research work particularly focuses on the quality of export memory, its determinants, its subsequent use in decision-making, and its ultimate relationship with export performance. Within export memory use, four export memory use dimensions have been discovered: instrumental, conceptual, legitimizing and manipulating. Results from the qualitative study based on the data from a mail survey with 354 responses reveal that the development of export memory quality is positively related with quality of export information acquisition, the quality of export information interpretation, export coordination, and integration of the information into the organizational system. Several company and environmental factors have also been examined in terms of their relationship with export memory use. The two factors found to be significantly related to the extent of export memory use are acquisition of export information quality and export memory quality. The results reveal that export memory quality is positively related to the extent of export memory use which in turn was found to be positively related to export performance. Furthermore, results of the study show that there is only one aspect of export memory use that significantly affects export performance – the extent of export memory use. This finding could mean that there is no particular type of export memory use favored since the choice of the type of use is situation specific. Additional results reveal that environmental turbulence and export memory overload have moderating effects on the relationship between export memory use and export performance.

Evaluating the impact of design decisions on the financial performance of manufacturing companies

Product design decisions can have a significant impact on the financial and operation performance of manufacturing companies. Therefore good analysis of the financial impact of design decisions is required if the profitability of the business is to be maximised. The product design process can be viewed as a chain of decisions which links decisions about the concept to decisions about the detail. The idea of decision chains can be extended to include the design and operation of the 'downstream' business processes which manufacture and support the product. These chains of decisions are not independent but are interrelated in a complex manner. To deal with the interdependencies requires a modelling approach which represents all the chains of decisions, to a level of detail not normally considered in the analysis of product design. The operational, control and financial elements of a manufacturing business constitute a dynamic system. These elements interact with each other and with external elements (i.e. customers and suppliers). Analysing the chain of decisions for such an environment requires the application of simulation techniques, not just to any one area of interest, but to the whole business i.e. an enterprise simulation. To investigate the capability and viability of enterprise simulation an experimental 'Whole Business Simulation' system has been developed. This system combines specialist simulation elements and standard operational applications software packages, to create a model that incorporates all the key elements of a manufacturing business, including its customers and suppliers. By means of a series of experiments, the performance of this system was compared with a range of existing analysis tools (i.e. DFX, capacity calculation, shop floor simulator, and business planner driven by a shop floor simulator).

Human performance modelling as an aid in the process of manufacturing system design

Manufacturing system design is an ongoing activity within industry. Modelling tools based on Discrete Event Simulation are often used by practitioners during this design cycle. However, such tools do not adequately model the behaviour of 'direct' workers in manufacturing environments. There is an important need to expand the capability of modelling to include the relationships between human centred factors (demography, attitudes, beliefs, etc), their working environment (physical and organizational), and their subsequent performance in terms of productive routines. Therefore, this paper describes research that has formed a pilot modelling methodology that is an important first step in providing such a capability.

Strategic marketing and business performance:a study in three European 'engineering countries'

In spite of its relevance, the effects of strategic marketing on business performance are sparingly studied, especially in particular business contexts. We address this gap in two ways. First, we examine the influence of four key strategic marketing concepts—market orientation, innovation orientation, and two marketing capability categories (outside-in and inside-out capabilities)—on company performance. Second, these relationships are studied in three European “engineering countries:” Austria, Finland and Germany. Their relative homogeneity enables testing the generality versus context-specificity of strategic marketing's performance impact. Using SEM analysis, surprisingly weak relationships between market orientation and outside-in capabilities, and business performance are identified, as opposed to the strong role of inside-out capabilities and innovation orientation. These results can be understood through the “engineering country” characteristics. Moreover, clear differences in results are identified among these relatively homogenous countries. This is a major finding as it challenges the widely assumed generality of the strategic marketing–performance relationship. Country-specific results have also considerable managerial relevance.

Organisational receptivity for change:combining context and capability to explain competitive advantage

This thesis explores efforts to conjoin organisational contexts and capabilities in explaining sustainable competitive advantage. Oliver (1997) argued organisations need to balance the need to conform to industry’s requirements to attain legitimization (e.g. DiMaggio & Powell, 1983), and the need for resource optimization (e.g. Barney, 1991). The author hypothesized that such balance can be viewed as movements along the homogeneity-heterogeneity continuum. An organisation in a homogenous industry possesses similar characteristics as its competitors, as opposed to a heterogeneous industry in which organisations within are differentiated and competitively positioned (Oliver, 1997). The movement is influenced by the dynamic environmental conditions that an organisation is experiencing. The author extended Oliver’s (1997) propositions of combining RBV’s focus on capabilities with institutional theory’s focus on organisational context, as well as redefining organisational receptivity towards change (ORC) factors from Butler and Allen’s (2008) findings. The authors contributed to the theoretical development of ORC theory to explain the attainment of sustainable competitive advantage. ORC adopts the assumptions from both institutional and RBV theories, where the receptivity factors include both organisational contexts and capabilities. The thesis employed a mixed method approach in which sequential qualitative quantitative studies were deployed to establish a robust, reliable, and valid ORC scale. The adoption of Hinkin’s (1995) three-phase scale development process was updated, thus items generated from interviews and literature reviews went through numerous exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) to achieve convergent, discriminant, and nomological validities. Samples in the first phase (semi structured interviews) were hotel owners and managers. In the second phase, samples were MBA students, and employees of private and public sectors. In the third phase, samples were hotel managers. The final ORC scale is a parsimonious second higher-order latent construct. The first-order constructs comprises four latent receptivity factors which are ideological vision (4 items), leading change (4 items), implementation capacity (4 items), and change orientation (7 items). Hypotheses testing revealed that high levels of perceived environmental uncertainty leads to high levels of receptivity factor. Furthermore, the study found a strong positive correlation between receptivity factors and competitive advantage, and between receptivity factors and organisation performance. Mediation analyses revealed that receptivity factors partially mediate the relationship between perceived environmental uncertainty, competitive advantage and organisational performance.

Process and performance in international collaborative research

Motivated by policy goals to develop international research capability and our experiences of collaborative research, we wanted to learn more about the factors that influence success in collaborative research. This article presents a review of the academic literature on collaborative research, focusing on multinational teams doing international comparative research. We address the question ‘what accounts for variation in process and performance of collaborative research projects?’, through 11 themes: context; vision; reward and commitment; leadership; structure; contract; task capability; sociability; communication; finance; rhythm and pace. We then propose an agenda for future research with an analytic framework and, finally, our conclusions.

Satisfaction as a predictor of future performance:a replication

Since the introduction of the Net Promoter concept there has been a vivid and ongoing debate among academics and practitioners about the performance of the Net Promoter Score (NPS) in comparison to other customer metrics, such as customer satisfaction, to predict company growth rates. We report results from a study using data from customers and firms in the Netherlands on the relationship between different satisfaction and loyalty metrics as well as the NPS with sales revenue growth, gross margins and net operating cash flows. We find that all metrics perform equally well in predicting current gross margins and current sales revenue growth and equally poor for predicting future sales growth and gross margins as well as current and future net cash flows. The NPS is neither superior nor inferior to other metrics. Taken together, our study suggests that the predictive capability of customer metrics, such as NPS, for future company growth rates is limited. © 2013 Elsevier B.V.

Integrating skills profiling and purchasing portfolio management:an opportunity for building purchasing capability

Kralijc’s (1983) purchasing portfolio approach holds that different types of purchases need different sourcing strategies, underpinned by distinct sets of resources and practices. The approach is widely deployed in business and extensively researched, and yet little research has been conducted on how knowledge and skills vary across a portfolio of purchases. This study extends the body of knowledge on purchasing portfolio management, and its application in the strategic development of purchasing in an organization, and on human resource management in the purchasing function. A novel approach to profiling purchasing skills is proposed, which is well suited to dynamic environments which require flexibility. In a survey, experienced purchasing personnel described a specific purchase and profiled the skills required for effective performance in purchasing that item. Purchases were categorized according to their importance to the organization (internally-oriented evaluation of cost and production factors) and to the supply market (externally-oriented evaluation of commercial risk and uncertainty). Through cluster analysis three key types of purchase situations were identified. The skills required for effective purchasing vary significantly across the three clusters (for 22 skills, p<0.01). Prior research shows that global organizations use the purchasing portfolio approach to develop sourcing strategies, but also aggregate analyses to inform the design of purchasing arrangements (local vs global) and to develop their improvement plans. Such organizations would also benefit from profiling skills by purchase type. We demonstrate how the survey can be adapted to provide a management tool for global firms seeking to improve procurement capability, flexibility and performance.

Co3O4 nanostructures with a high rate performance as anode materials for lithium-ion batteries, prepared via book-like cobalt-organic frameworks

The self-assembly of cobalt coordination frameworks (Co-CPs) with a two-dimensional morphology is demonstrated by a solvothermal method. The morphology of the Co-CPs has been controlled by various solvothermal conditions. The two-dimensional nanostructures agglomerated by Co3O4 nanoparticles remained after the pyrolysis of the Co-CPs. The as-synthesized Co3O4 anode material is characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge-discharge measurements. The morphology of Co3O4 plays a crucial role in the high performance anode materials for lithium batteries. The Co3O4 nanoparticles with opened-book morphology deliver a high capacity of 597 mA h g-1 after 50 cycles at a current rate of 800 mA g-1. The opened-book morphology of Co3O4 provides efficient lithium ion diffusion tunnels and increases the electrolyte/Co3O4 contact/interfacial area. At a relatively high current rate of 1200 mA g-1, Co3O4 with opened-book morphology delivers an excellent rate capability of 574 mA h g-1.