Carbon sources for Power-to-Gas applications in the Finnish energy system

This thesis is done as a part of the NEOCARBON project. The aim of NEOCARBON project is to study a fully renewable energy system utilizing Power-to-Gas or Power-to-Liquid technology for energy storage. Power-to-Gas consists of two main operations: Hydrogen production via electrolysis and methane production via methanation. Methanation requires carbon dioxide and hydrogen as a raw material. This thesis studies the potential carbon dioxide sources within Finland. The different sources are ranked using the cost and energy penalty of the carbon capture, carbon biogenity and compatibility with Power-to-Gas. It can be concluded that in Finland there exists enough CO2 point sources to provide national PtG system with sufficient amounts of carbon. Pulp and paper industry is single largest producer of biogenic CO2 in Finland. It is possible to obtain single unit capable of grid balancing operations and energy transformations via Power-to-Gas and Gas-to-Power by coupling biogas plants with biomethanation and CHP units.

Prosessiteollisuuden sekoittimen elinkaariarviointi

Työn tavoitteena oli tehdä elinkaariarviointi (LCA) prosessiteollisuuden sekoittimelle Helmix HF-80 ja analysoida LCA-tulokset, vaikutus ilmaston lämpenemisen potentiaalin (GWP) suhteen, sekä tutkia GWP-vaikutuksen pienentämisen mahdollisuuksia. Tutkittavan sekoittimen mahdolliset käyttökohteet ovat sellu- ja paperiteollisuus, raskaiden jätenesteiden käsittely, sekä muut teollisuusalueet, joissa käytetään tämän tyyppisiä laitteita. Työssä on muun muassa käsitelty sekoitusprosessit, sekoituslaitteiden tyypit, niiden rakenteiden ominaisuudet, käyttötarkoitus, toimintaperiaatteet, sekä sellu- ja paperi-teollisuudessa käytettävien sekoittimien yleiskatsaus. Työssä on myös kuvattu elinkaariarviointi (LCA) -menetelmä ja sen käyttötarkoitus. Tärkeimmistä tuloksista voi mainita sen, että sekoittimen (ilman säiliötä, sähkömoottoria ja vaihteistoa) kokoelinkaaren ilmastonlämpenemisen potentiaali (GWP) on noin 750 000 kg CO2-Equiv. Sekoittimen tuotanto- ja kierrätysaikana syntyy vain 1200 kg CO2-Equiv. ja suurin osa 748 000 kg CO2-Equiv. johtuu sähköenergian kulutuksesta käytön aikana. Käyttöajan vaikutusta voisi pienentää arvoksi 0 kg CO2-Equiv. käyttämällä pelkästään uusiutuvaa energiaa. Jos tuotantoaikana käytetty energia myös korvataan uusiutuvalla energialla, niin GWP-arvo koko elinkaaren aikana laskee arvoon 1006 kg CO2eqv., mikä on vain 0,13 % saaduista tuloksista. Suurin osa tästä arvosta liittyy sekoittimen materiaalin, tässä tapauksessa ruostumattoman teräksen tuotantoon.

Characterization of microalgae native to Quebec for biofuel production.

La production de biodiésel par des microalgues est intéressante à plusieurs niveaux. Dans le premier chapitre, un éventail de pour et contres concernant l’utilisation de microalgues pour la production de biocarburant sont ici révisés. La culture d’algues peut s'effectuer en utilisant des terres non-arables, de l’eau non-potable et des nutriments de base. De plus, la biomasse produite par les algues est considérablement plus importante que celle de plantes vasculaires. Plusieurs espèces on le contenu lipidique en forme de triacylglycérols (TAGs), qui peut correspondre jusqu'à 30% - 40% du poids sec de la biomasse. Ces proportions sont considérablement plus élevées que celui des huiles contenues dans les graines actuellement utilisées pour le biodiésel de première génération. Par contre, une production pratique et peu couteuse de biocarburant par des microalgues requiert de surpasser plusieurs obstacles. Ceci inclut le développement de systèmes de culture efficace à faible coût, de techniques de récupération requérant peu d’énergie, et de méthodes d’extraction et de conversion de l’huile non-dommageables pour l’environnement et peu couteuses. Le deuxième chapitre explore l'une des questions importantes soulevées dans le premier chapitre: la sélection d'une souche pour la culture. Une collection de souches de microalgues d'eau douce indigène au Québec a été établi et examiné au niveau de la diversité physiologique. Cette collection est composée de cent souches, que apparaissaient très hétérogènes en terme de croissance lorsque mises en culture à 10±2 °C ou 22±2 °C sur un effluent secondaire d’une usine municipale de traitement des eaux usées (EU), défini comme milieu Bold's Basal Medium (BBM). Des diagrammes de dispersion ont été utilisés pour étudier la diversité physiologique au sein de la collection, montrant plusieurs résultats intéressants. Il y avait une dispersion appréciable dans les taux de croissance selon les différents types de milieux et indépendamment de la température. De manière intéressante, en considérant que tous les isolats avaient initialement été enrichis sur milieu BBM, la distribution était plutôt symétrique autour de la ligne d’iso-croissance, suggérant que l’enrichissement sur BBM n’a pas semblé biaiser la croissance des souches sur ce milieu par rapport aux EU. Également, considérant que les isolats avaient d’abord été enrichis à 22°C, il est assez surprenant que la distribution de taux de croissance spécifiques soit aussi symétrique autour de la ligne d’iso-croissance, avec grossièrement des nombres égaux d’isolats de part et d’autre. Ainsi, l’enrichissement à 22°C ne semble pas biaiser les cellules vers une croissance à cette température plutôt que vers 10°C. Les diagrammes de dispersion obtenus lorsque le pourcentage en lipides de cultures sur BBM ont été comparées à des cultures ayant poussé sur EU soit à 10°C ou 22°C rendent évident que la production de lipides est favorisée par la culture sur EU aux deux températures, et que la production lipidique ne semble pas particulièrement plus favorisée par l’une ou l’autre de ces températures. Lorsque la collection a été examinée pour y déceler des différences avec le site d’échantillonnage, une analyse statistique a montré grossièrement que le même degré de diversité physiologique était retrouvé dans les échantillons des deux différents sites. Le troisième chapitre a poursuivi l'évaluation de la culture d'algues au Québec. L’utilisation de déchets industriels riches en nutriments minéraux et en sources de carbone pour augmenter la biomasse finale en microalgues et le produit lipidique à faible coût est une stratégie importante pour rendre viable la technologie des biocarburants par les algues. Par l’utilisation de souches de la collection de microalgues de l’Université de Montréal, ce rapport montre pour la première fois que des souches de microalgues peuvent pousser en présence de xylose, la source de carbone majoritairement retrouvée dans les eaux usées provenant des usines de pâte et papier, avec une hausse du taux de croissance de 2,8 fois par rapport à la croissance photoautotrophe, atteignant jusqu’à µ=1,1/jour. En présence de glycérol, les taux de croissance atteignaient des valeurs aussi élevées que µ=1,52/jour. La production lipidique augmentait jusqu’à 370% en présence de glycérol et 180% avec le xylose pour la souche LB1H10, démontrant que cette souche est appropriée pour le développement ultérieur de biocarburants en culture mixotrophe. L'ajout de xylose en cultures d'algues a montré certains effets inattendus. Le quatrième chapitre de ce travail a porté à comprendre ces effets sur la croissance des microalgues et la production de lipides. Quatre souches sauvages indigènes ont été obersvées quotidiennement, avant et après l’ajout de xylose, par cytométrie en flux. Avec quelques souches de Chlorella, l’ajout de xylose induisait une hausse rapide de l’accumulation de lipide (jusqu’à 3,3 fois) pendant les premières six à douze heures. Aux temps subséquents, les cellules montraient une diminution du contenu en chlorophylle, de leur taille et de leur nombre. Par contre, l’unique membre de la famille des Scenedesmaceae avait la capacité de profiter de la présence de cette source de carbone sous culture mixotrophe ou hétérotrophe sans effet négatif apparent. Ces résultats suggèrent que le xylose puisse être utilisé avant la récolte afin de stimuler l’augmentation du contenu lipidique de la culture d’algues, soit en système de culture continu ou à deux étapes, permettant la biorestauration des eaux usées provenant de l’industrie des pâtes et papiers. Le cinquième chapitre aborde une autre déché industriel important: le dioxyde de carbone et les gaz à effet de serre. Plus de la moitié du dioxyde de carbone qui est émis dans l'atmosphère chaque jour est dégagé par un processus stationnaire, soit pour la production d’électricité ou pour la fabrication industrielle. La libération de CO2 par ces sources pourrait être atténuée grâce à la biorestauration avec microalgues, une matière première putative pour les biocarburants. Néanmoins, toutes les cheminées dégagent un gaz différent, et la sélection des souches d'algues est vitale. Ainsi, ce travail propose l'utilisation d’un état de site particulier pour la bioprospection de souches d'algues pour être utilisé dans le processus de biorestauration. Les résultats montrent que l'utilisation d'un processus d'enrichissement simple lors de l'étape d'isolement peut sélectionner des souches qui étaient en moyenne 43,2% mieux performantes dans la production de biomasse que les souches isolées par des méthodes traditionnelles. Les souches isolées dans ce travail étaient capables d'assimiler le dioxyde de carbone à un taux supérieur à la moyenne, comparées à des résultats récents de la littérature.

Evolução setorial e trajetórias tecnológicas em nível de empresas na indústria de celulose e papel no Brasil (1970 - 2004): contexto da política de substituição de importações à competição globalizada

Accordingly, a variety of firms's technological capabilities studies, the literature recently is still lacking about the dynamic of sector evolution and technological development in inter-firm and their implication for technical and economical financial performance. More lacking is the research catching up the evolution of industrial sectors after the institutional reforms in the 90. For that, the focus of the dissertation is to analyze the main of the evolution of the pulp and paper industry from 1970 to 2004, using as reference points the import-substitution policy and the economic deregulation of the 1990s. Futhermore, the work tries to evaluate how such changes at industry level have been perceived from a firm point of view in terms of accumulation of technological capabilities and improvement of economic financial performance. This linkage is tested and examined in the following firms: Aracruz (Barra do Riacho establishment ), Klabin (Monte Alegre establishment) e Votorantim Celulose e Papel ¿ VCP (Jacareí establishment), defining the same time period of sectoral level. As far as the industry level study is concerned, it is based on the average rate of annual growth of some selected variables, given that the technological capabilities test is performed according to the methodology already existing in the literature, but properly adapted to the pulp and paper case. Similarly, the analysis regarding the improvement of the economic financial performance is based on a set of industry specific indicators. Hence, the work is built upon multiple case studies, taking into account both the qualitative and quantitative evidence, i.e. interviews, direct observations, as well as firm reports. Finally, it is worth emphasizing as the analysis of the changes in the sector, in conjunction with the above mentioned methodology used to measure the technological capabilities in the context of an evolving industrial regime, is still lacking in emerging economies as well as in Brazil. According to the empirical evidence, the reforms of the 1990s had a positive impact on the industrial development, from both the national and international viewpoint. Such a transformation was evident at firm level in terms of accumulation of technological capabilities and improvement of economic financial indicators. Indeed, the results show that the speed of accumulation of technological capabilities within the firms influences positively the performance indicators. On the other hand, these are also related to external factors, such as the macroeconomic conditions, which as such have not been considered in details.

Como o marketing verde interfere na imagem da marca da indústria de celulose: o estudo de caso da aracruz celulose

The purpose of this work, is to analyze the principles underlying the pulp and paper industry, here portrayed by Aracruz Celulose S A, in the marketing standpoint, as far as it concerns being in harmony with nature and adapting its relations with the stakeholders, notably regarding the community of the State of Espírito Santo. As they form, indeed, part of the same discussion, the goal is to proceed with a detailed examination of the major aspects and conditions involved, based in its corporate communications, leading to the construction of a positive corporate brand. The results found throughout this study show that despite Aracruz and the communities¿ different goals, they converge regarding their interests towards the best practices in social and environmental practices, and a more objective communication. Industry and community can work together for a same benefit: the best relations of man towards Nature, and of man towards man. The examples here stated will endorse our perception as well as serve to evaluate the results of the measures adopted in this relationship. It could be verified how internal and external aspects of the organization influence the company¿s reputation, leading to important changes in attitude and in the production process. Pressures from stakeholders have contributed largely in helping Aracruz become more conscious of the important role it plays in the social-environmental universe of the State of Espírito Santo. The assessment of leading the process of communications within in-depth transparency have signaled that, despite a closer approach with its stakeholders, Aracruz still needs to fulfill an existing gap: an excellent rapport between the company and the communities where it influences still needs to be pursued, especially regarding communicating its activities.

Trajetórias De Acumulação De Capacidades Inovadoras, Mecanismos De Aprendizagem E Fatores Organizacionais Relativos A Atividades Em Gestão De Projetos: Estudo De Caso Comparativo Inter-Empresarial Na Indústria De Bens De Capital E De Celulose E Papel No Brasil

Over the last 40 years there has been a profusion of studies about the ccumulation of technological capacities in firms from developing economies. However, there remain few studies that examine, on a combined basis, the relationship among: the trajectories of technological capacities accumulation; the underlying learning mechanisms; and, the implications of organizational factors for these two variables. Still scarcer are the studies that examine the relationship among these variables along time and based on a comparative case study. This dissertation examines the relationship among the trajectory of accumulation of innovative capacities in complex project management, the learning mechanisms underlying these technological capacities and the intra-organizational factors that influence these learning echanisms. That set of relationships is examined through a comparative and a long-term (1988-2008) case study in a capital goods firm (for the pulp and paper industry) and a pulp mill in Brazil. Based on first-hand quantitative and qualitative empiric evidence, gathered through extensive field research, this dissertation found: 1. Both firms accumulated innovative capacity in project management at the international frontier level (Level 6). However, there was variability between the firms in terms of the nature and speed of accumulation of those capacities. It was also observed that, at this level of innovation, the innovative capacities of both firms are not confined to their organizational boundaries, but they are distributed beyond their boundaries. 2. So that these companies could accumulate those levels of innovative capacities it was necessary to manage several learning mechanisms: leveraging of external knowledge and its internalization in terms of internal apacities of the firm. In other words, as the companies accumulated more innovative levels of capacities for project management, it was necessary to manage different cycles of technological learning. 3. Further, the relationship between the ccumulation of technological capacities and learning was affected positively by intra-organizational factors, such as 'authority disposition', 'mutability of work roles' and 'intensity of internal crises', and negatively by the factor 'singularity of goals'. This dissertation revealed divergent results between firms in two of the four factors studied. These results contribute to advance our understanding of the complexity and variability involved in the process of accumulation of innovative capacities in firms from developing economies. This highlights the growing importance of the organizational and the human resource dimensions of innovation and technological capacity as the company approaches the international frontier. The results suggest to managers that: (i) the good performance in project management in the two firms studied did not occur simply as a result of the pulp and paper Brazilian industry growth, rather as a result of the deliberate construction and accumulation of the capacities through an intensive and coordinated cyclical process of technological learning, (ii) to develop innovative capabilities in project management, besides looking for learning mechanisms they should also look at the organizational factors that influence the learning mechanisms directly, (iii) performance of pulp mill¿s projects is better when projects are implemented together with technology suppliers than when performed only by the mill. This dissertation concludes that capital goods firms have been having a fundamental role for the innovative capabilities accumulation in project management of pulp mills in Brazil (and vice-versa) for a long time. This contradicts some authors' propositions that affirm that: a) equipment suppliers for the pulp and paper industry have been creating little, if any, development of processes or engineering projects in Brazil; b) firms in the pulp and paper industry have little capacity for machinery and equipments projects only taking place in few technological activities, being internal or external to the firm. Finally, some studies are proposed for future research.

Análise do setor de celulose e papel na era da globalização: um olhar sobre sua produção e mão-de-obra

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sector forestal-celulosa, agricultura de secano e industria en el Gran Concepción: ¿encadenamiento productivo o enclave?

Se aborda el binomio cadenas productivas y territorio, identificándose dos tipos de desarrollo: el "enclave" del Secano Interior y el de "encadenamiento potencial" entre dicho enclave y la Conurbación del Gran Concepción. Los beneficios de la cadena productiva forestal-celulosa, de importancia mundial, no llegan a su territorio, que permanece en la precariedad. El Gran Concepción, segunda conurbación industrial de importancia nacional, no logra conectarse virtuosamente con su entorno cercano mediante sus redes económicas, ni tampoco con la cadena forestal-celulosa del Secano Interior. El artículo se basa en datos de flujos económicos a partir de la matriz insumo-producto de 2008, en encuestas efectuadas en el contexto de un proyecto del Fondo Nacional de Desarrollo Regional (FNDR, 2008), y en el estudio sobre Chile y sus tipos de desarrollo (Falabella, 2000 y 2002). Finalmente, se plantea la necesidad de generar una plataforma política territorial para el desarrollo económico que facilite la rearticulación productiva.

Aproveitamento de resíduos da indústria de celulose e papel em argamassa mista de revestimento interno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Complexo xilanolítico de Penicillium sclerotiorum: produção, purificação e caracterização de xilanases e de ß-xilosidases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Estudos exploratórios sobre propriedades térmicas do compósito cimento-polpa celulósica(CPC)

The search for a more aware use of available raw materials has led to a need to create more sustainable products. The use of natural fibers to reinforce cement, for instance, has been widely studied in the past decades because of the possibility that they can improve material properties such as thermal resistance and to compression, besides conferring a decrease in their total weight. This present study aimed at to conduct preliminary studies on the thermal resistance of the composite cement - Cellulose Pulp, using waste from the pulp and paper industry. Through experiments, it was found that the composite manufactured using the ratio 30 % Portland cement and 70 % pulp, showed satisfactory results regarding its thermal resistance, so it could be considered as a potential thermal insulation material, for use in constructions

Eucalyptus urograndis stem proteome is responsive to short-term cold stress

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Definición de los procedimientos e indicadores de la cadena de custodia de la industria de pasta y papel vinculados a la normativa ISO 9000/14000

En el trabajo se ha reflejado la génesis del término „desarrollo sostenible‟ y la preocupación social y de los gobiernos hacia la sostenibilidad de los recursos, generando una política forestal a escala internacional, cuyo hito inicial desempeña la Cumbre de Rio y otros procesos, donde surge el término „sostenibilidad‟ - procesos gubernamentales que ponen su atención en los bosques,entre ellos el Proceso paneuropeo del que emanan los Criterios e indicadores de la gestión forestal sostenible, así como otros foros donde aparece la vinculación entre los productos y la sostenibilidad de los bosques de donde proceden. A partir de esos conceptos aparecen los sistemas de certificación, primero FSC, promovido por las ONG ambientalistas, y en respuesta a ello, el sistema PEFC de los propietarios forestales privados con las industrias forestales. En su introducción, el trabajo recoge como surge y evoluciona esta preocupación y como se sucede y desarrollan los sistemas de certificación en España, orientados tanto a la superficie forestal como a sus productos derivados. Tratando de ser una herramienta técnica, en estos últimos quince años, se han ido planteando metodologías y propuestas técnicas que puedan garantizar el origen sostenible del bosque de donde procede la materia prima. Aunque la persistencia de la masa forestal como término tiene importancia, no considera numerosos aspectos incluidos en el concepto “gestión forestal sostenible”. El trabajo manifiesta qué es y cómo se origina la Gestión Forestal Sostenible y muy ligado con ello, el origen de la certificación como herramienta, explicando cómo se incardina la certificación forestal española con las estructuras internacionales y se construyen nuevas estructuras a escala española y autonómica. Se expone el dominio y alcance técnico de la certificación, sus inicios y un análisis de la diversidad de sistemas y etiquetas existentes -como ha ido evolucionando a escala internacional y nacional, por sistemas, sectores y continentes, con especial atención en España, recopilando lo sucedido relevante para el sector forestal, industrias forestales y sistemas de certificación en los años de estudio de elaboración de la tesis. Se refleja la relevancia que adquiere la certificación forestal y de la cadena de custodia para la industria del papel, tanto por las regulaciones, normativas y legislación que involucran al producto derivado del bosque como por ser herramienta que enlaza el bosque sostenible con el consumidor. La aplicación de todas esas especificaciones técnicas que muestran la sostenibilidad del bosque y al trazabilidad en el proceso productivo comporta una carga administrativa de recopilación de información, de control para el seguimiento asociado con los registros necesarios, y de archivo de documentos, conforme a las exigencias que plantean los sistemas de certificación forestal. Por tanto, es importante definir un método y procedimientos genéricos para los correspondientes sistemas de gestión preexistentes en las empresas del sector de pasta y papel (de calidad/ de medio ambiente/integrados), para implantar un Sistema de Cadena de Custodia genérico (común a FSC y PEFC) en una instalación de celulosa y papel y un sistema de diligencia debida. Para ello, ha sido necesario analizar la línea de producción y establecer los puntos de su diagrama en los que se requiere el control de la trazabilidad, puntos en los que se procede al seguimiento y registro de la materia prima, materia semielaborada y producto, y de ahí proceder a redactar o retocar los procedimientos de gestión calidad/ medioambiental, en su caso, para incluir los campos de registro. Según determinen los procedimientos, se efectuará un seguimiento y registro de los, derivados que configuran una característica y se determinará una serie de indicadores del sistema de trazabilidad de la madera en la industria de celulosa y papel, es decir, un conjunto de parámetros cuantitativos y descriptivos, sujetos al seguimiento de forma periódica, que muestren el cambio y permitan observar la evaluación y control del Sistema de Cadena de Custodia. Además de asegurar la trazabilidad de la madera y fibra en la industria de pasta y papel y con ello la sostenibilidad del bosque del que procede, se avalará la legalidad de los aprovechamientos que proporcionan ese recurso maderable, cumpliendo así no sólo la legislación vigente sino también ambos sistemas de certificación FSC y PEFC. El sistema de cadena de custodia de la pasta y papel se caracteriza por los indicadores de seguimiento que permite el control de la trazabilidad. ABSTRACT This paper traces the origins of the term „Sustainable Development‟ and of both citizen and institutional concern for the sustainability of resources, leading to the enactment of a forestry policy at international level, of which the initial milestones are the Rio Summit and other processes in which the term „Sustainability‟ was born. Those forestfocused institutional initiatives include the pan-European process that led to the publication of Sustainable Forest Management Criteria and Indicators, and other forums that highlight the link between finished wood-based products and the sustainability of the forests from which that wood is sourced. Those concepts were the culture in which forest certification systems were engendered, first FSC, promoted by environmental NGOs, and subsequently PEFC, fostered in response to FSC by private forest owners and forest-based industries. In its Introduction, this paper looks at how such concern arose and has evolved and how certification systems came into existence in Spain and developed to encompass both forest lands and forest-based products. As part of a mission to provide an applicable technical tool, new methodologies and technical proposals have been put forward over the past fifteen years aimed at guaranteeing the sustainable origin of the forest from which raw material is sourced. Although the maintenance of forest stands as a term in its own right is important, it does not take many of the aspects included in the concept of “sustainable forest management” into account. This thesis describes what SFM is and how it was born, underlying the close link between SFM and the origin of certification as a tool, explaining how Spanish forest certification is embodied in international structures, while new structures are built here in Spain on both the national and regional scale. This work also details the domain and scope of forest certification from the technical standpoint, explains its beginnings, and assesses the various systems and labels that exist - how certification has evolved internationally and nationally across systems, sectors and continents, with special emphasis on Spain. It provides a compilation of events relevant to forestry, forest industries and forest certification systems that have taken place during the years this thesis has been in preparation. It reflects on the relevance that forest and chain of custody certification holds for the paper industry, in view not only of the regulations, policies and legislation that affect forest-based products but also of its role as a tool that bonds the sustainable forest with the consumer. Implementing the range of technical specifications to demonstrate forest sustainability and traceability throughout the production process entails the administrative burden of collecting information and providing controls to process the relevant records and documents to be kept on file in compliance with the requirements made by forest certification schemes. It is therefore important to define a generic method, together with its relevant procedures,that fits the management systems (quality / environmental / integrated)existing today in pulp and paper companies, in order to implement a generic Chain of Custody scheme (common to FSC and PEFC) in a pulp and paper mill, and a due diligence system. To achieve that, it has first been necessary to analyse the production line and establish points along the route where traceabilitycontrols need to be implemented and points where raw material, semi-finished goods and end products should be monitored and recorded. Subsequently, the procedures in quality / environmental management systems need to be drafted or amended as required to include fields that reflect those records. As required by the procedures, forest-based products that have a specific characteristic shall be monitored and recorded, and a number of indicators identified in the traceability system of wood for pulp & paper, i.e.createa set of quantitative and descriptive parameters subject to regular monitoringthat reveal changes and enable the Chain of Custody system to be assessed and controlled. In addition to ensuring the traceability of wood and fibre in the pulp and paper industry -and so the sustainability of the forest from which it is sourced -, the legality of the harvesting that produces that timber will also be enhanced, thus fulfilling not only the law but also both FSC and PEFC certification schemes. The chain of custody system for pulp and paper is characterised by monitoring indicators that enable traceability to be controlled.

Electric Motor Life Estimate Based on Statistic Data

Many different methods based on both planned inspection and health inspection for estimate of electrical equipment health are used. The estimation method of residual life of electric motors by their health in pulp and paper industry is considered.