962 resultados para Optimal network configuration
Resumo:
The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.
Resumo:
Behavioral consequences of a brain insult represent an interaction between the injury and the capacity of the rest of the brain to adapt to it. We provide experimental support for the notion that genetic factors play a critical role in such adaptation. We induced a controlled brain disruption using repetitive transcranial magnetic stimulation (rTMS) and show that APOE status determines its impact on distributed brain networks as assessed by functional MRI (fMRI).Twenty non-demented elders exhibiting mild memory dysfunction underwent two fMRI studies during face-name encoding tasks (before and after rTMS). Baseline task performance was associated with activation of a network of brain regions in prefrontal, parietal, medial temporal and visual associative areas. APOE ε4 bearers exhibited this pattern in two separate independent components, whereas ε4-non carriers presented a single partially overlapping network. Following rTMS all subjects showed slight ameliorations in memory performance, regardless of APOE status. However, after rTMS APOE ε4-carriers showed significant changes in brain network activation, expressing strikingly similar spatial configuration as the one observed in the non-carrier group prior to stimulation. Similarly, activity in areas of the default-mode network (DMN) was found in a single component among the ε4-non bearers, whereas among carriers it appeared disaggregated in three distinct spatiotemporal components that changed to an integrated single component after rTMS. Our findings demonstrate that genetic background play a fundamental role in the brain responses to focal insults, conditioning expression of distinct brain networks to sustain similar cognitive performance.
Resumo:
PURPOSE: Small cell carcinomas of the bladder (SCCB) account for fewer than 1% of all urinary bladder tumors. There is no consensus regarding the optimal treatment for SCCB. METHODS AND MATERIALS: Fifteen academic Rare Cancer Network medical centers contributed SCCB cases. The eligibility criteria were as follows: pure or mixed SCC; local, locoregional, and metastatic stages; and age ≥18 years. The overall survival (OS) and disease-free survival (DFS) were calculated from the date of diagnosis according to the Kaplan-Meier method. The log-rank and Wilcoxon tests were used to analyze survival as functions of clinical and therapeutic factors. RESULTS: The study included 107 patients (mean [±standard deviation, SD] age, 69.6 [±10.6] years; mean follow-up time, 4.4 years) with primary bladder SCC, with 66% of these patients having pure SCC. Seventy-two percent and 12% of the patients presented with T2-4N0M0 and T2-4N1-3M0 stages, respectively, and 16% presented with synchronous metastases. The most frequent curative treatments were radical surgery and chemotherapy, sequential chemotherapy and radiation therapy, and radical surgery alone. The median (interquartile range, IQR) OS and DFS times were 12.9 months (IQR, 7-32 months) and 9 months (IQR, 5-23 months), respectively. The metastatic, T2-4N0M0, and T2-4N1-3M0 groups differed significantly (P=.001) in terms of median OS and DFS. In a multivariate analysis, impaired creatinine clearance (OS and DFS), clinical stage (OS and DFS), a Karnofsky performance status <80 (OS), and pure SCC histology (OS) were independent and significant adverse prognostic factors. In the patients with nonmetastatic disease, the type of treatment (ie radical surgery with or without adjuvant chemotherapy vs conservative treatment) did not significantly influence OS or DFS (P=.7). CONCLUSIONS: The prognosis for SCCB remains poor. The finding that radical cystectomy did not influence DFS or OS in the patients with nonmetastatic disease suggests that conservative treatment is appropriate in this situation.
Resumo:
ABSTRACT The present study aimed at evaluating the heterotic group formation in guava based on quantitative descriptors and using artificial neural network (ANN). For such, we evaluated eight quantitative descriptors. Large genetic variability was found for the eight quantitative traits in the 138 genotypes of guava. The artificial neural network technique determined that the optimal number of groups was three. The grouping consistency was determined by linear discriminant analysis, which obtained classification percentage of the groups, with a value of 86 %. It was concluded that the artificial neural network method is effective to detect genetic divergence and heterotic group formation.
Resumo:
Local trajectories and arrangements play a significant role because the development of a research field, such as nanoscience and nanotechnology, requires substantial investments in human and instrumental resources. But why are there often concentrated in a limited number of places? What dynamics lead to such concentration? The hypothesis is that there is an assemblage of heterogeneous resources through the action of local actors. The chapter will explore, from an Actor Network Theory (ANT) perspective, how the local emergence of research dynamics from: the revival of local traditions, the local and national action of institutional entrepreneurs, controversial dynamics, and researchers' arrangements to involve other actors. It will examine how they connect up with each other and mutually commit themselves to the development of new technologies. It will focus on the role of narratives in this assembling: how were the local narratives of the past mobilized and to what effect.
Resumo:
Que ce soit d'un point de vue, urbanistique, social, ou encore de la gouvernance, l'évolution des villes est un défi majeur de nos sociétés contemporaines. En offrant la possibilité d'analyser des configurations spatiales et sociales existantes ou en tentant de simuler celles à venir, les systèmes d'information géographique sont devenus incontournables dans la gestion et dans la planification urbaine. En cinq ans la population de la ville de Lausanne est passée de 134'700 à 140'570 habitants, alors que les effectifs de l'école publique ont crû de 12'200 à 13'500 élèves. Cet accroissement démographique associé à un vaste processus d'harmonisation de la scolarité obligatoire en Suisse ont amené le Service des écoles à mettre en place et à développer en collaboration avec l'université de Lausanne des solutions SIG à même de répondre à différentes problématiques spatiales. Établies en 1989, les limites des établissements scolaires (bassins de recrutement) ont dû être redéfinies afin de les réadapter aux réalités d'un paysage urbain et politique en pleine mutation. Dans un contexte de mobilité et de durabilité, un système d'attribution de subventions pour les transports publics basé sur la distance domicile-école et sur l'âge des écoliers, a été conçu. La réalisation de ces projets a nécessité la construction de bases de données géographiques ainsi que l'élaboration de nouvelles méthodes d'analyses exposées dans ce travail. Cette thèse s'est ainsi faite selon une dialectique permanente entre recherches théoriques et nécessités pratiques. La première partie de ce travail porte sur l'analyse du réseau piéton de la ville. La morphologie du réseau est investiguée au travers d'approches multi-échelles du concept de centralité. La première conception, nommée sinuo-centralité ("straightness centrality"), stipule qu'être central c'est être relié aux autres en ligne droite. La deuxième, sans doute plus intuitive, est intitulée centricité ("closeness centrality") et exprime le fait qu'être central c'est être proche des autres (fig. 1, II). Les méthodes développées ont pour but d'évaluer la connectivité et la marchabilité du réseau, tout en suggérant de possibles améliorations (création de raccourcis piétons). Le troisième et dernier volet théorique expose et développe un algorithme de transport optimal régularisé. En minimisant la distance domicile-école et en respectant la taille des écoles, l'algorithme permet de réaliser des scénarios d'enclassement. L'implémentation des multiplicateurs de Lagrange offre une visualisation du "coût spatial" des infrastructures scolaires et des lieux de résidence des écoliers. La deuxième partie de cette thèse retrace les aspects principaux de trois projets réalisés dans le cadre de la gestion scolaire. À savoir : la conception d'un système d'attribution de subventions pour les transports publics, la redéfinition de la carte scolaire, ou encore la simulation des flux d'élèves se rendant à l'école à pied. *** May it be from an urbanistic, a social or from a governance point of view, the evolution of cities is a major challenge in our contemporary societies. By giving the opportunity to analyse spatial and social configurations or attempting to simulate future ones, geographic information systems cannot be overlooked in urban planning and management. In five years, the population of the city of Lausanne has grown from 134'700 to 140'570 inhabitants while the numbers in public schools have increased from 12'200 to 13'500 students. Associated to a considerable harmonisation process of compulsory schooling in Switzerland, this demographic rise has driven schooling services, in collaboration with the University of Lausanne, to set up and develop GIS capable of tackling various spatial issues. Established in 1989, the school districts had to be altered so that they might fit the reality of a continuously changing urban and political landscape. In a context of mobility and durability, an attribution system for public transport subventions based on the distance between residence and school and on the age of the students was designed. The implementation of these projects required the built of geographical databases as well as the elaboration of new analysis methods exposed in this thesis. The first part of this work focuses on the analysis of the city's pedestrian network. Its morphology is investigated through multi-scale approaches of the concept of centrality. The first conception, named the straightness centrality, stipulates that being central is being connected to the others in a straight line. The second, undoubtedly more intuitive, is called closeness centrality and expresses the fact that being central is being close to the others. The goal of the methods developed is to evaluate the connectivity and walkability of the network along with suggesting possible improvements (creation of pedestrian shortcuts).The third and final theoretical section exposes and develops an algorithm of regularised optimal transport. By minimising home to school distances and by respecting school capacity, the algorithm enables the production of student allocation scheme. The implementation of the Lagrange multipliers offers a visualisation of the spatial cost associated to the schooling infrastructures and to the student home locations. The second part of this thesis recounts the principal aspects of three projects fulfilled in the context of school management. It focuses namely on the built of an attribution system for public transport subventions, a school redistricting process and on simulating student pedestrian flows.
Resumo:
Peer-reviewed
Resumo:
Recent developments in optical communications have allowed simpler optical devices to improve network resource utilization. As such, we propose adding a lambda-monitoring device to a wavelength-routing switch (WRS) allowing better performance when traffic is routed and groomed. This device may allow a WRS to aggregate traffic over optical routes without incurring in optical-electrical-optical conversion for the existing traffic. In other words, optical routes can be taken partially to route demands creating a sort of "lighttours". In this paper, we compare the number of OEO conversions needed to route a complete given traffic matrix using either lighttours or lightpaths
Resumo:
This is a study of team social networks, their antecedents and outcomes. In focusing attention on the structural configuration of the team this research contributes to a new wave of thinking concerning group social capital. The research site was a random sample of Finnish work organisations. The data consisted of 499 employees in 76 teams representing 48 different organisations. A systematic literature review and quantitative methods were used in conducting the research: the former primarily to establish the current theoretical position on the relationships among the variables and the latter to test these relationships. Social network analysis was the primary method used in identifying the social-network relations among the work-team members. The first and key contribution of this study is that it relates the structuralnetwork properties of work teams to behavioural outcomes, attitudinal outcomes and, ultimately, team performance. Moreover, it shows that addressing attitudinal outcomes is also important in terms of team performance; attitudinal outcomes (team identity) mediated the relationship between the team’s performance and its social network. The second contribution is that it examines the possible antecedents of the social structure. It is thus one response to Salancik’s (1995) call for a network theory in that it explains why certain network characteristics exist. Itdemonstrates that irrespective of whether or not a team is heterogeneous in terms of age or gender, educational diversity may protect it from centralisation. However, heterogeneity in terms of gender turned out to have a negative impact on density. Thirdly, given the observation that the benefits of (team) networks are typically theorised and modelled without reference to the nature of the relationships comprising the structure, the study directly tested whether team knowledge mediated the effects of instrumental and expressive network relationships on team performance. Furthermore, with its focus on expressive networks that link the workplace to a more informal world, which have been rather neglected in previous research, it enhances knowledge of teams andnetworks. The results indicate that knowledge sharing fully mediates the influence of complementarities between dense and fragmented instrumental network relationships, thus providing empirical validation of the implicit understanding that networks transfer knowledge. Fourthly, the study findings suggest that an optimal configuration of the work-team social-network structure combines both bridging and bonding social relationships.
Resumo:
The aim of this master’s thesis is to develop an algorithm to calculate the cable network for heat and power station CHGRES. This algorithm includes important aspect which has an influence on the cable network reliability. Moreover, according to developed algorithm, the optimal solution for modernization cable system from economical and technical point of view was obtained. The conditions of existing cable lines show that replacement is necessary. Otherwise, the fault situation would happen. In this case company would loss not only money but also its prestige. As a solution, XLPE single core cables are more profitable than other types of cable considered in this work. Moreover, it is presented the dependence of value of short circuit current on number of 10/110 kV transformers connected in parallel between main grid and considered 10 kV busbar and how it affects on final decision. Furthermore, the losses of company in power (capacity) market due to fault situation are presented. These losses are commensurable with investment to replace existing cable system.
Resumo:
Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.
Experimental evaluation of the performance of a wireless sensor network in agricultural environments
Resumo:
The aim of this study was to perform an experimental study to evaluate the proper operation distance between the nodes of a wireless sensor network available on the market for different agricultural crops (maize, physic nut, eucalyptus). The experimental data of the network performance offers to farmers and researchers information that might be useful to the sizing and project of the wireless sensor networks in similar situations to those studied. The evaluation showed that the separation of the nodes depends on the type of culture and it is a critical factor to ensure the feasibility of using WSN. In the configuration used, sending packets every 2 seconds, the battery life was about four days. Therefore, the autonomy may be increased with a longer interval of time between sending packets.
Resumo:
Cyber security is one of the main topics that are discussed around the world today. The threat is real, and it is unlikely to diminish. People, business, governments, and even armed forces are networked in a way or another. Thus, the cyber threat is also facing military networking. On the other hand, the concept of Network Centric Warfare sets high requirements for military tactical data communications and security. A challenging networking environment and cyber threats force us to consider new approaches to build security on the military communication systems. The purpose of this thesis is to develop a cyber security architecture for military networks, and to evaluate the designed architecture. The architecture is described as a technical functionality. As a new approach, the thesis introduces Cognitive Networks (CN) which are a theoretical concept to build more intelligent, dynamic and even secure communication networks. The cognitive networks are capable of observe the networking environment, make decisions for optimal performance and adapt its system parameter according to the decisions. As a result, the thesis presents a five-layer cyber security architecture that consists of security elements controlled by a cognitive process. The proposed architecture includes the infrastructure, services and application layers that are managed and controlled by the cognitive and management layers. The architecture defines the tasks of the security elements at a functional level without introducing any new protocols or algorithms. For evaluating two separated method were used. The first method is based on the SABSA framework that uses a layered approach to analyze overall security of an organization. The second method was a scenario based method in which a risk severity level is calculated. The evaluation results show that the proposed architecture fulfills the security requirements at least at a high level. However, the evaluation of the proposed architecture proved to be very challenging. Thus, the evaluation results must be considered very critically. The thesis proves the cognitive networks are a promising approach, and they provide lots of benefits when designing a cyber security architecture for the tactical military networks. However, many implementation problems exist, and several details must be considered and studied during the future work.
Resumo:
This study focuses on the relationship between organizational network competence and the internationalization process of small- and medium sized enterprises (SMEs). Over recent decades, the global business environment has become increasingly conducive to internationalization of small firms. A central facilitating factor in the process has been the emergence of networked business relationships between internationalizing firms. Research on SME internationalization has found that certain types of structures and dynamics of business networks allow SMEs access to the resources they need to enter foreign markets. This consequently means that their internationalization often becomes to depend on the networks they are embedded in. However, research so far has mostly ignored the possibility that the organizational ability to develop and manage business network relationships, network competence, may be a major underlying factor in determining how well SMEs can leverage their network relationships to enter foreign markets and consequently may determine in large part how successful their internationalization process turns out to be. This study aims to respond to those gaps, by empirically examining how the development of network competence in internationalizing SMEs influences the internationalization outcomes that they can expect, and how such network competence is conceptualized and developed. Using a mixed methods approach, survey data collected from 298 Finnish SMEs across five industry sectors is first used to examine how levels of network competence are related to internationalization propensity of SMEs and their subsequent international performance, growth and profitability as internationally operating firms. In order to illustrate in more detail the ways in which network competence is conceptualized and how it develops during the internationalization process of an SME, qualitative data from internationally operating Finnish SMEs are used. Longitudinal interview data of an internationalizing Finnish SME is accompanied by data gathered through a series of semistructured interviews of Finnish and Russian managers involved in mutual business relationship dyads. Structurally, this thesis examines the research issue as an article-based dissertation, consisting of five journal and conference publications. Three of these publications are based on the quantitative data, and the remaining two apply the qualitative interview data. The results find several aspects where network competence has a positive influence on the success of internationalizing SMEs, how it develops and what it entails conceptually in this context. Quantitatively, the level of network competence is found to have a positive relationship to various internationalization outcomes, including the propensity of SMEs to enter foreign markets and on their subsequent international performance, their growth and their profitability. Additionally, the positive relationship is divided between the relationship-specific and cross-relational dimension of network competence, in that the influence of the former is relevant for the propensity to internationalize, while the latter is for the growth and profitability of the already internationalized SMEs. Qualitatively, the results suggest, firstly, that the development process of network competence does not necessarily precede the start of the internationalization process, but may occur through a gradual learning process alongside it. And secondly, the results also imply that the conceptualization of network competence by Finnish managers of internationally operating Finnish SMEs is structurally distinct from that of their culturally distinct partner managers in Russia. This study contributes to the literature on SME internationalization in several ways. Firstly, it introduces operationalized organizational competencies to the literature on internationalization of SMEs, which has so far mainly examined the influence of business networking on the internationalization process without having such an organizational viewpoint. Furthermore, this study provides a multi-level analysis of the determinants of successful SME internationalization, by examining various strategic and performance outcomes across the process. These results also contribute to the literature on organizational strategy of internationalizing SMEs, by clarifying how different dimensions of business networking may be optimal in different phases of the internationalization process. Conceptually, the results of this study contribute to the literature on competence development and SME internationalization, by illustrating how the development process of network competence may occur during internationalization process. Thus, they also contribute to the discussion on how SMEs are able to influence the dynamics and structures of their business networks over time. Finally, this study contributes to the literature on the role of culture in the internationalization process, by implying that the cultural background of the manager of the SME may determine whether business networking and network competence is seen as an organizational-level or an individual level capability. The study also includes some additional contributions to the literature on dynamic capabilities in strategic management, and on that of strategic business networks. These include further clarifying the exact nature and tangibility of dynamic capabilities, and being one of the first studies to introduce constructs from both dynamic capabilities and business network literature to the field of international entrepreneurship. And finally, the study also has some contribution on the two streams of literature, in illustrating how both dyadic and network-level capabilities may be relevant, depending on the current strategic goals and market position of the firm. Keywords: network competence, internationalizatio
Resumo:
This research work addresses the problem of building a mathematical model for the given system of heat exchangers and to determine the temperatures, pressures and velocities at the intermediate positions. Such model could be used in nding an optimal design for such a superstructure. To limit the size and computing time a reduced network model was used. The method can be generalized to larger network structures. A mathematical model which includes a system of non-linear equations has been built and solved according to the Newton-Raphson algorithm. The results obtained by the proposed mathematical model were compared with the results obtained by the Paterson approximation and Chen's Approximation. Results of this research work in collaboration with a current ongoing research at the department will optimize the valve positions and hence, minimize the pumping cost and maximize the heat transfer of the system of heat exchangers.