Deeper insights into SRB-driven biocorrosion mechanisms

Dissertação para obtenção do Grau de Doutor em Química Sustentável

Development of oxidoreductase based electrochemical biosensors

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Bioremediation and CO2 scavenging using molybdenum-containing enzymes

Carbon dioxide valorization, will not only help to relieve the greenhouse effect but might also allow us to transform it in value-added chemicals that will help overcoming the energy crisis. To accomplish this goal, more research that focus on sequestering CO2 and endeavors through a carbon-neutral or carbon-negative strategy is needed in order to handle with the dwindling fossil fuel supplies and their environmental impact. Formate dehydrogenases are a promising means of turning CO2 into a biofuel that will allow for a reduction of greenhouse gas emissions and for a significant change to the economic paramount. The main objective of this work was to assess whether a NAD+-independent molybdenum-containing formate dehydrogenase is able to catalyze the reduction of CO2 to formate. To achieve this, a molybdenum-containing formate dehydrogenase was isolated from the sulfate reducing bacteria Desulfovibrio desulfuricans ATCC 27774. Growth conditions were found that allowed for a greater cellular mass recovery and formate dehydrogenase expression. After growth trials, kinetic assays for formate oxidation and CO2 reduction were performed and kinetic parameters determined. For the formate oxidation reaction, a KM of 49 μM and a turnover constant of 146 s-1 were determined. These kinetic parameters are in agreement with those determined by Mota, et al. (2011). Finally, we found that this molybdenum-containing enzyme was able to catalyze the reduction of CO2 to formate with a turnover constant of 4.6 s-1 and a KM of 13 μM. For the first time a NAD+-independent molybdenum-containing formate dehydrogenase was found to catalyze CO2 reduction, allowing its use as a biocatalyst in energetically efficient CO2 fixation processes that can be directed towards bioremediation or as an alternative and renewable energy source. Characterizing these enzymes may lead to the development of more efficient synthetic catalysts, make them readily available and more suited for practical applications.

Drug resistance of Mycobacterium tuberculosis strains in southern Brazil

INTRODUCTION: The aim of this work was to evaluate the prevalence of Mycobacterium tuberculosis (MT) strains with mutations that could result in resistance to the main drugs used in treatment in a region with one of the highest numbers of tuberculosis (TB) cases in southern Brazil. METHODS: Deoxyribonucleic acid (DNA) from 120 sputum samples from different patients suspicious of pulmonary tuberculosis who attended the Municipal Public Laboratory for Mycobacterium sp. diagnosis was directly amplified and analyzed by PCR-SSCP. The DNA was amplified in known hotspot mutation regions of the genes rpoB, ahpC, embB, katG, inhA, and pncA. RESULTS: The percentage of samples positive by culture was 9.2% (11/120); 5% (6/120) were positive by bacilloscopy and MT-PCR, and DNA fragments of the aforementioned resistance genes could be amplified from seven (7) of the eleven (11) samples with positive results, either by culture or PCR/bacilloscopy. All presented a SSCP pattern similar to a native, nonresistant genotype, with the ATCC strain 25177 as control, except for one sample (0.01%), which presented a SSCP profile demonstrating mutation at the embB gene. CONCLUSIONS: These results are consistent with the empirical observations by physicians treating TB patients in our region of a low occurrence of cases that are refractory to conventional treatment schemes, in contrast to other parts of the country. Continued surveillance, especially molecular, is essential to detect and monitor the outbreak of MT-resistant strains.

Preliminary screening of the larvicidal effect of Brevibacillus laterosporus strains against the blowfly Chrysomya megacephala(Fabricius, 1794) (Diptera: Calliphoridae)

AbstractINTRODUCTION: This study evaluated whether different strains of Brevibacillus laterosporus could be used to control larvae of the blowfly Chrysomya megacephala , a pest that affects both human and animal health.METHODS:Mortality rates were recorded after 1-mL suspensions of sporulated cells of 14 different strains of B. laterosporus were added to 2.5g of premixed diet consisting of rotting ground beef fed to first instar larvae of C. megacephala . All bioassays were performed using 10 larvae per strain, with a minimum of three replicates for each bioassay. Larval mortality was recorded daily up to seven days.RESULTS:Strains Bon 707, IGM 16-92, and Shi 3 showed the highest toxicity toward the larvae producing 70.5%, 64.5%, and 51.6% of larval mortality, respectively, which was significantly higher than that in the control group (p < 0.05). In contrast, strains NRS 1642, NRS 661, NRS 590 BL 856, NRS 342, ATCC 6457, Bon 712, and NRS 1247 showed limited or no pathogenic activity against the target larvae.CONCLUSIONS:Our preliminary data indicated that B. laterosporus could be used to develop bioinsecticides against C. megacephala .

Valorization of olive pomace through combination of biocatalysis with supercritical fluid technology

A supercritical carbon dioxide (scCO2) based oil extraction method was implemented on olive pomace (alperujo), and an oil yield of 25,5 +/- 0,8% (goil/gdry residue) was obtained. By Soxhlet extraction with hexane, an oil extraction yield of 28,9 +/- 0,8 % was obtained, which corresponds to an efficiency of 88,4 +/- 4,8 % for the supercritical method. The scCO2 extraction process was optimized for operating conditions of 50 MPa and 348,15 K, for which an oil loading of 32,60 g oil/kg CO2 was calculated. As a proof of concept, olive pomace was used as feedstock for biodiesel production, in a process combining the use of lipase as a catalyst with the use of scCO2 as a solvent, and integrating the steps of oil extraction, oil to biodiesel transesterification and subsequent separation of the latter. In the conducted experiments, FAME (fatty acid methyl ester) purities of 90% were obtained, with the following operating parameters: an oil:methanol molar ratio of 1:24; a residence time of 7,33 and 11,6 mins; a pressure of 40 MPa; a temperature of 313,15 K; and Lipozyme (Mucor miehei; Sigma-Aldritch) as an enzyme. However, oscillations of FAME purity were registered throughout the experiments, which could possibly be due to methanol accumulation in the enzymatic reactor. Finally, the phenolic content of olive pomace, and the effect of the drying process – oven or freeze-drying – and the extraction methods – hydro-alcoholic method and supercritical method – on the phenolic content were analysed. It was verified that the oven-drying process on the olive pomace preserved 90,1 +/- 3,6 % of the total phenolic content. About 62,3 +/- 5,53% of the oven-dried pomace phenolic content was extracted using scCO2 at 60 MPa and 323,15 K. Seven individual phenols – hydroxytyrosol, tyrosol, oleuropein, quercetin, caffeic acid, ferulic acid and p-coumaric acid – were identified and quantified by HPLC.

Chemical composition and antifungal activity of essential oil from Eucalyptus smithii against dermatophytes

ABSTRACT INTRODUCTION: In this study, we evaluated the chemical composition of a commercial sample of essential oil from Eucalyptus smithii R.T. Baker and its antifungal activity against Microsporum canis ATCC 32903, Microsporum gypseum ATCC 14683, Trichophyton mentagrophytes ATCC 9533, T. mentagrophytes ATCC 11480, T. mentagrophytes ATCC 11481, and Trichophyton rubrum CCT 5507. METHODS: Morphological changes in these fungi after treatment with the oil were determined by scanning electron microscopy (SEM). The antifungal activity of the oil was determined on the basis of minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) values. RESULTS: The compound 1,8-cineole was found to be the predominant component (72.2%) of the essential oil. The MIC values of the oil ranged from 62.5μg·mL−1 to >1,000μg·mL−1, and the MFC values of the oil ranged from 125μg·mL−1 to >1,000μg·mL−1. SEM analysis showed physical damage and morphological alterations in the fungi exposed to this oil. CONCLUSIONS: We demonstrated the potential of Eucalyptus smithii essential oil as a natural therapeutic agent for the treatment of dermatophytosis.

Antibacterial properties of fibrous stents coated with silver oxide nanocoatings

Stents are rigid and perforated tubular structures, which are inserted into blood vessels in order to prevent or inhibit the constriction of blood flow, restoring the normal blood flow, when blood vessels are clogged, being used in 70% of angioplasties. These medical devices assume great importance in the treatment of cardiovascular diseases (CVD) which are the leading cause of death worldwide. In the European Union CVD account for 40% of deaths and assume an estimated annual cost of 196 billion euros[1]. Stents must possess certain requirements, in order to, adequately, perform its function, such as biocompatibility (so that its use does not c ause damage on the health of its user), mechanical strength, radiopacity (so that it is easy to view), longitudinal flexibility, ease of handling, corrosion resistance and having high strength and high radial expansion ability to recover. Stents can be made of different materials, but metals, particularly stainless steel, are the most common. However, metallic stents present several dRawbacks such as corrosion and restenosis, leading to health complications for the patient, or even death. In order to minimize these disadvantages, new materials, like fibrous materials, have been used [2]. Monofilaments present high potential for stents development because, in addition to its biocompatibility, these materials allow the application of various surface treatments, such as antibacterial coatings. Furthermore, monofilament exhibit excellent mechanical properties, like greater stiffness and good results when subjected to compression, tensile and bending forces, since these forces will be directly supported by the monofilament [3]. To minimize the reaction of the human body and Limit the adhesion of microorganisms to the stent surface, some coatings have been developed, including the use of novel metals with antimicrobial properties, like silver. The main objective of this study was the development of fibrous stents, incorporation of silver oxide nanocoating. For the development of the stent, polyester monofilaments with 0.27mm of diameter were used in braiding technology, with a mandrel diameter of 6mm and a braiding angle of 35⁰. The mechanical behaviour of the stent were evaluated by mechanical testing under longitudinal and radial compression, bending. The results of compressive strength tests are according with value from literature: 1.13 to 2.9 N for radial compression and 0. 16-5.28N to longitudinal compression. From literature is also possible to verify that stents must present 75% of unchanged diameter during the bending test and must possess a porosity between 70% and 80% [4]. The produced polyester stent presents values of 1.29N for radial compression, 0.23N for longitudinal compression, 80% of porosity and 85.5% of unchanged diameter, during bending tests. For the antibacterial functionalization, silver oxide nanocoatings were prepared, through reactive magnetron g, with an Ag target in an Ar +O2 atmosphere. In order to evaluate the nanostructure and morphology of the coatings, d ifferent technique s like X-ray diffraction (XRD), scanning electron microscopy (SEM) and and X- ray photoelectron spectroscopy (XPS were used. From the analyses of XRD it is possible to verify that the peaks corresponds to planes of Ag2 O and MATERIAIS 2015 Porto, 21-23 June, 2015 characterize a cubic phase. The presence of Ag2 O is corroborated by XPS spectrum, where it is possible to observe silver, not only, in oxide state, but a lso in mettalic state, and it is possible to verify the presence of silver clusters, confirmed by SEM analysis. Films’ roughness and topography, parameters influencing the wettability of the surface and microorganism adhesion, were measured by Atomic Force Microscopy (AFM), and it was observed that the roughness is very low (under 10 nm). Coatings’ hydrophobicity and surface tension parameters were determined by contact angle measurement, and it was verified the hydrophobic behavior of the coatings. For antibacterial tests were used Staphylococcus epidermidis strain (IE186) and Staphylococcus aureus(ATCC 6538), and halo inhibition zone tests were realized. Ag+release rates were studied by means of inductively coupled plasma mass spectrometry (ICP -MS). The obtained results suggest that silver oxide coatings do not modify significantly surface properties of the substrate, like hydrophobicity and roughness, and present antimicrobial properties for both bacteria used.

Antimicrobial activity of bergenin from Endopleura uchi (Huber) Cuatrec

Endopleura uchi (Huber) Cuatrec. is an Amazon species traditionally used as treatment for inflammations and female disorders. Bergenin was isolated from ethyl acetate fraction of bark of E. uchi by using column chromatography over sephadex LH-20 and then silica gel 60 flash. Its structure was identified on the basis of its NMR spectra. The antimicrobial activity of bergenin and fractions of methanol extract of E. uchi were evaluated against ATCC microorganisms (Escherichia coli, Salmonella enteritidis, Pseudomonas aeruginosa, Enterococcus faecalis, Staphylococcus aureus, Candida albicans, C. guilliermondii, Aspergillus flavus, A. nidulans). Clinically isolated strains of all of these microorganisms, along with C. tropicalis, A. niger, Shigella sonnei, Serratia marcenses and Klebsiella pneumoniae were also evaluated. The growth inhibition caused by bergenin, extracts and fractions of E. uchi against ATCC microorganisms were similar to the inhibition to microorganisms clinically isolated. The ethyl acetate fraction and the isolate bergenin inhibit the growth of the yeasts C. albicans, C. tropicalis, and C. guilliermondii, but present lower activity against filamentous fungi Aspergillus flavus, A. nidulans, A. niger, and did not inhibit the Gram positive and Gram negative bacteria. The activity of the ethyl acetate fraction and bergenin are in agreement wit its high concentration found in bark extract of E. uchi. Moreover, the selective activity against three Candida species helps to understand its traditional use against infections that affect women.

Estudio fitoquímico de hojas de Uncaria guianensis y evaluación de actividad antibacteriana

Del extracto de éter de petróleo de hojas de Uncaria guianensis (Rubiaceae), se aisló un compuesto tipo clorina denominado éster etílico de feoforbida a y una mezcla de esteroles conocidos como β-sitosterol y estigmasterol. Sus estructuras fueron elucidadas por análisis detallado de RMN, incluyendo técnicas bidimensionales, y por comparación con datos reportados en la literatura. Posteriormente, se evaluó la actividad antibacteriana al éster etílico de feoforbida a contra dos cepas Gram(+): S. aureus ATCC 6538 y E. faecalis ATCC 29212 y contra tres cepas Gram (-): E. coli ATCC 25922, S. typhimurium ATCC 14028s y S. typhimurium MS7953. Se encontró actividad significativa contra S. aureus, E. faecalis, E. coli y S. tiphymurium MS7953.

Comparing different methods to measure biofilm thickness: the techniques are: optical coherence tomography, confocal laser scanning microscopy and low load compression test

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)

Bacterial cellulose-lactoferrin as an antimicrobial edible packaging

Bacterial cellulose (BC) films from two distinct sources (obtained by static culture with Gluconacetobacter xylinus ATCC 53582 (BC1) and from a commercial source (BC2)) were modified by bovine lactoferrin (bLF) adsorption. The functionalized films (BC+bLF) were assessed as edible antimicrobial packaging, for use in direct contact with highly perishable foods, specifically fresh sausage as a model of meat products. BC+bLF films and sausage casings were characterized regarding their water vapour permeability (WVP), mechanical properties, and bactericidal efficiency against two food pathogens, Escherichia coli and Staphylococcus aureus. Considering their edibility, an in vitro gastrointestinal tract model was used to study the changes occurring in the BC films during passage through the gastrointestinal tract. Moreover, the cytotoxicity of the BC films against 3T3 mouse embryo fibroblasts was evaluated. BC1 and BC2 showed equivalent density, WVP and maximum tensile strength. The percentage of bactericidal efficiency of BC1 and BC2 with adsorbed bLF (BC1+bLF and BC2+bLF, respectively) in the standalone films and in inoculated fresh sausages, was similar against E. coli (mean reduction 69 % in the films per se versus 94 % in the sausages) and S. aureus (mean reduction 97 % in the films per se versus 36 % in the case sausages). Moreover, the BC1+bLF and BC2+bLF films significantly hindered the specific growth rate of both bacteria. Finally, no relevant cytotoxicity against 3T3 fibroblasts was found for the films before and after the simulated digestion. BC films with adsorbed bLF may constitute an approach in the development of bio-based edible antimicrobial packaging systems.

Candida tropicalis biofilms: biomass, metabolic activity and secreted aspartyl proteinase production

According to epidemiological data, Candida tropicalis has been related to urinary tract infections and haematological malignancy. Several virulence factors seem to be responsible for C. tropicalis infections, for example: their ability to adhere and to form biofilms onto different indwelling medical devices; their capacity to adhere, invade and damage host human tissues due to enzymes production such as proteinases. The main aim of this work was to study the behaviour of C. tropicalis biofilms of different ages (24120 h) formed in artificial urine (AU) and their ability to express aspartyl proteinase (SAPT) genes. The reference strain C. tropicalis ATCC 750 and two C. tropicalis isolates from urine were used. Biofilms were evaluated in terms of culturable cells by colony-forming units enumeration; total biofilm biomass was evaluated using the crystal violet staining method; metabolic activity was evaluated by XTT assay; and SAPT gene expression was determined by real-time PCR. All strains of C. tropicalis were able to form biofilms in AU, although with differences between strains. Candida tropicalis biofilms showed a decrease in terms of the number of culturable cells from 48 to 72 h. Generally, SAPT3 was highly expressed. C. tropicalis strains assayed were able to form biofilms in the presence of AU although in a strain- and time-dependent way, and SAPT genes are expressed during C. tropicalis biofilm formation.

Novel strategies to combat gram-negative bacterial pathogens using bacteriophage proteins

Dissertação de mestrado em Bioengenharia

Regulación de la función de macrófagos por Cryptococcus neoformans y Cryptococcus gattii y su participación en la generación de la inmunidad adaptativa antifúngica. Regulation of macrophage function by Cryptococcus neoformans and Cryptococcus gattii and their role in the antifungal adaptative immunity.

La criptococosis es causada por la inhalación de levaduras encapsuladas de Cryptococcus neoformans o Cryptococcus gattii. Representa una de las tres infecciones graves por oportunistas en pacientes con SIDA y existe aproximadamente un 6 por ciento de incidencia de criptococosis clínica en pacientes con transplante de órganos sólidos. Estas dos especies difieren la fisiopatogenia durante la infección. El factor de virulencia principal de Cryptococcus sp. es la presencia del polisacárido capsular, glucuronoxilomanano (GXM), de alto peso molecular, que es continuamente secretado por las levaduras. Los macrófagos son células centrales en la respuesta innata al hongo, los cuales deben ser activados por linfocitos T helper 1 para un eficiente control de la infección. Sin embargo, estas células también son suceptibles al parasitismo intracelular, permitiendo la infección persistente y la diseminación a sitios extrapulmonares. Este proyecto propone investigar la capacidad de levaduras de C. neoformans, C. gattii y de los polisacáridos capsulares para modular la respuesta proinflamatoria de los macrófagos. Queremos estudiar si el tratamiento de macrófagos con levaduras o polisacárido puede inducir perfiles supresores de la respuesta protectiva T helper 1, tales como linfocitos T helper 2 o T reguladores, favoreciendo la sobrevida intracelular del hongo. Además, pensamos que C. neoformans o C. gattii podrían inducir un activación diferencial de macrófagos lo que condicionaría la respuesta adaptativa, lo que podría explicar las diferencias en la fisiopatogenia de estas dos especies. Procedimientos experimentales -Microorganismos y obtención de GXM: se trabajará con C. neoformans variedad grubii, cepa ATCC 62067 y C. gattii serotipo B, cepa NIH112B. Se obtendrán polisacáridos capsulares (GXM) de C. neoformans y C. gattii por precipitación con etanol y y acomplejamiento selectivo con CTAB. - Obtención de macrófagos murinos y cultivos celulares: se obtendrán macrófagos por lavados peritoneales y/o alveolares de ratones BALB/c. Los macrófagos se cultivarán por 24 h en ausencia o presencia de levaduras muertas o vivas (sin opsonizar u opsonizadas) de C. neoformans o C. gattii o en presencia de GXM purificado. -Objetivo 1. Estudio de la modulación de las propiedades proinflamatorias de Mac: en sobrenadantes de los cultivos se medirán las citoquinas por ELISA de captura y en lisados celulares, la expresión de las enzimas (iNOS, arginasa, IDO) por western blot. Se analizará por citometría de flujo la expresión de MCHII y moléculas CD80, CD86, CD40, CTLA-4. -Objetivo 2. Estudios in vitro de la capacidad de macrófagos tratados con levaduras o GXM para inducir linfocitos Th1, Th2 o Treg: los macrófagos preincubados con GXM o levaduras, se incubarán con linfocitos autólogos estimulados con anti-CD3. Se medirá la proliferación celular y el perfil de citoquinas por citomtría de flujo. Células T CD4+ CD25- serán purificadas de suspenciones esplénicas de ratones normales. Luego las células serán incubadas con macrófagos (sin tratar o tratados con levaduras o GXM) y estimulados con anti-CD3. Se analizará la proliferación celular con CFSE y expresión de CD4, CD25 y Foxp3 . - Objetivo 3. Estudios in vivo de la capacidad de levaduras o GXM para inducir linfocitos Th1, Th2 o Treg . Rol de los macrófagos in vivo: Los ratones serán inyectados con 100000 levaduras o con 200 µg de GXM puro vía endovenosa y luego de 7, 14, 30 y 40 días se evaluarán las poblaciones celulares de bazo, por citometría de flujo usando marcaciones simultáneas para CD4, CD8, CD25, Foxp3 y citoquinas intracelulares. Para investigar la participación in vivo de los macrófagos, se depletaran estas células inyectando los animales con PBS-liposomas o clodronato (DMDP)-liposomas por vía endovenosa o inhalatoria (200- 300 µl por ratón). Luego de 24 h, los animales se infectarán con levaduras o inocularán con GXM y se evaluarán los perfiles de células T esplénicos o de nódulos linfaticos.