Avaliação da gestão curricular da matemática : cursos profissionais III

No mundo do trabalho, designadamente na indústria, acentua-se o défice de competências matemáticas nos profissionais da indústria, particularmente a Modelação Matemática, facto que constitui uma preocupação crescente à escala mundial e, obviamente, do sistema educativo português e da comunidade matemática nacional. Este défice é justificado pela falta de formação dos professores em contexto industrial e, de acordo com a National Council of Teachers of Mathematics, pela incapacidade que muitos docentes têm em apresentar a Matemática aplicada a situações laborais. Face à relevância social, económica e política da problemática descrita, centrou-se o presente estudo na Avaliação da Gestão Curricular da Matemática nos Cursos Profissionais de nível III do ensino secundário em Portugal, com enfoque na Modelação Matemática que, segundo os referentes internacionais, é simultaneamente uma competência e uma metodologia de ensino promotora do desenvolvimento de competências matemáticas nos profissionais da indústria. No contexto da gestão do currículo da Matemática para os cursos profissionais de nível III em escolas secundárias portuguesas, desenvolveu-se o presente estudo para se responder à questão de investigação: Em que medida a gestão curricular da Matemática, instituída, intencional e implementada nos cursos profissionais de nível III contempla situações-problema, suscetíveis de promover o desenvolvimento de competências no aluno, relevantes para o seu desempenho profissional? Construiu-se um referencial de avaliação, centrado na dimensão ecológica, segundo o modelo teórico Enfoque Ontosemiótico, abarcando um conjunto de sub-dimensões sobre as quais foram definidos critérios e respetivos indicadores. De realçar, ainda, que o referencial, além de ter servido de instrumento de avaliação da gestão curricular da Matemática nos cursos profissionais de nível III do ensino secundário, serviu, também, como guia orientador no desenho das sete situações-problema de natureza de Modelação Matemática no estudo de funções. O enquadramento metodológico do presente estudo assentou no método Estudo de Caso. Para analisar o caso, selecionaram-se sete unidades integradas de análise, a saber: a gestão curricular da Matemática de cada um dos seis professores participantes e a gestão curricular da Matemática instituída pelos normativos oficiais (programa da componente de formação científica da disciplina de Matemática para os cursos profissionais). Para a análise dos dados empíricos, respeitantes à gestão instituída, recorreuse à análise de conteúdo e teve essencialmente como propósito avaliar em que medida as orientações curriculares, emanadas no Programa da componente de formação científica disciplina de Matemática para os cursos profissionais de nível III, estão em conformidade com os referenciais teóricos. Sequencialmente, a operacionalização da avaliação intencional consubstanciou-se nos planos das aulas cedidos previamente a cada observação. A análise de conteúdo, como técnica de tratamento dos dados empíricos, foi a forma de se aceder às intenções de cada professor participante no estudo. A observação de aulas sucedeu à avaliação do plano de aula, constituindo a forma de avaliar in loco a gestão curricular da Matemática implementada, permitindo avaliar a coerência das observações com as intenções expressas nas planificações. Os registos das observações foram concretizados sob a forma de notas de campo que incluem uma componente descritiva e outra reflexiva que se dirigem para a análise dos dados empíricos recolhidos. Em termos de resultados, a avaliação da gestão curricular instituída foi reveladora de que o postulado pelos referentes para o desenvolvimento de competências tem a sua representação nas orientações curriculares expressas no Programa da componente de formação científica da disciplina de Matemática para os cursos profissionais de nível III. Contrariamente, a gestão curricular da Matemática pelos professores participantes revelou-se muito condicionada ao cumprimento dos conteúdos propostos pelo programa da disciplina. Por conseguinte, a gestão curricular da Matemática por competências, enfatizada no Programa (gestão instituída), encontrou, neste estudo, pouca tradução na gestão curricular intencional e implementada dos professores participantes, na medida em que a mesma não refletiu uma articulação com a componente de formação técnica do curso, visando uma metodologia proactiva no desenho de situações-problema promotoras de desenvolver, nos alunos, competências profícuas para a sua profissão, nomeadamente a Modelação Matemática. De salientar, ainda, que uma percentagem muito significativa de situações-problema propostas pelos professores não são, no geral, pertinentes para os respetivos cursos, não sendo, neste sentido, promotoras do estabelecimento de ligação com a futura performance profissional dos alunos. Tal lacuna parece ter resultado da ausência de trabalho colaborativo entre os professores de Matemática e os restantes docentes que constituem a equipa formativa do curso, lacuna que dificulta a articulação e coordenação em prol de um ensino contextualizado, ou ainda pela ausência de formação contínua pelos professores, no âmbito de temáticas inerentes à gestão curricular a cursos profissionais.

Wind energy resource modelling in Portugal and its future large-scale alteration due to anthropogenic induced climate changes

The high dependence of Portugal from foreign energy sources (mainly fossil fuels), together with the international commitments assumed by Portugal and the national strategy in terms of energy policy, as well as resources sustainability and climate change issues, inevitably force Portugal to invest in its energetic self-sufficiency. The 20/20/20 Strategy defined by the European Union defines that in 2020 60% of the total electricity consumption must come from renewable energy sources. Wind energy is currently a major source of electricity generation in Portugal, producing about 23% of the national total electricity consumption in 2013. The National Energy Strategy 2020 (ENE2020), which aims to ensure the national compliance of the European Strategy 20/20/20, states that about half of this 60% target will be provided by wind energy. This work aims to implement and optimise a numerical weather prediction model in the simulation and modelling of the wind energy resource in Portugal, both in offshore and onshore areas. The numerical model optimisation consisted in the determination of which initial and boundary conditions and planetary boundary layer physical parameterizations options provide wind power flux (or energy density), wind speed and direction simulations closest to in situ measured wind data. Specifically for offshore areas, it is also intended to evaluate if the numerical model, once optimised, is able to produce power flux, wind speed and direction simulations more consistent with in situ measured data than wind measurements collected by satellites. This work also aims to study and analyse possible impacts that anthropogenic climate changes may have on the future wind energetic resource in Europe. The results show that the ECMWF reanalysis ERA-Interim are those that, among all the forcing databases currently available to drive numerical weather prediction models, allow wind power flux, wind speed and direction simulations more consistent with in situ wind measurements. It was also found that the Pleim-Xiu and ACM2 planetary boundary layer parameterizations are the ones that showed the best performance in terms of wind power flux, wind speed and direction simulations. This model optimisation allowed a significant reduction of the wind power flux, wind speed and direction simulations errors and, specifically for offshore areas, wind power flux, wind speed and direction simulations more consistent with in situ wind measurements than data obtained from satellites, which is a very valuable and interesting achievement. This work also revealed that future anthropogenic climate changes can negatively impact future European wind energy resource, due to tendencies towards a reduction in future wind speeds especially by the end of the current century and under stronger radiative forcing conditions.

The impact of biofuels for road traffic on air quality : a modelling approach

The selection of the energy source to power the transport sector is one of the main current concerns, not only relative with the energy paradigm but also due to the strong influence of road traffic in urban areas, which highly affects human exposure to air pollutants and human health and quality of life. Due to current important technical limitations of advanced energy sources for transportation purposes, biofuels are seen as an alternative way to power the world’s motor vehicles in a near-future, helping to reduce GHG emissions while at the same time stimulating rural development. Motivated by European strategies, Portugal, has been betting on biofuels to meet the Directive 2009/28/CE goals for road transports using biofuels, especially biodiesel, even though, there is unawareness regarding its impacts on air quality. In this sense, this work intends to clarify this issue by trying to answer the following question: can biodiesel use contribute to a better air quality over Portugal, particularly over urban areas? The first step of this work consisted on the characterization of the national biodiesel supply chain, which allows verifying that the biodiesel chain has problems of sustainability as it depends on raw materials importation, therefore not contributing to reduce the external energy dependence. Next, atmospheric pollutant emissions and air quality impacts associated to the biodiesel use on road transports were assessed, over Portugal and in particular over the Porto urban area, making use of the WRF-EURAD mesoscale numerical modelling system. For that, two emission scenarios were defined: a reference situation without biodiesel use and a scenario reflecting the use of a B20 fuel. Through the comparison of both scenarios, it was verified that the use of B20 fuels helps in controlling air pollution, promoting reductions on PM10, PM2.5, CO and total NMVOC concentrations. It was also verified that NO2 concentrations decrease over the mainland Portugal, but increase in the Porto urban area, as well as formaldehyde, acetaldehyde and acrolein emissions in the both case studies. However, the use of pure diesel is more injurious for human health due to its dominant VOC which have higher chronic hazard quotients and hazard indices when compared to B20.

Novel hardware and software combination for automotive motorsport vehicles based on direct processing of graphical functions

The main motivation for the work presented here began with previously conducted experiments with a programming concept at the time named "Macro". These experiments led to the conviction that it would be possible to build a system of engine control from scratch, which could eliminate many of the current problems of engine management systems in a direct and intrinsic way. It was also hoped that it would minimize the full range of software and hardware needed to make a final and fully functional system. Initially, this paper proposes to make a comprehensive survey of the state of the art in the specific area of software and corresponding hardware of automotive tools and automotive ECUs. Problems arising from such software will be identified, and it will be clear that practically all of these problems stem directly or indirectly from the fact that we continue to make comprehensive use of extremely long and complex "tool chains". Similarly, in the hardware, it will be argued that the problems stem from the extreme complexity and inter-dependency inside processor architectures. The conclusions are presented through an extensive list of "pitfalls" which will be thoroughly enumerated, identified and characterized. Solutions will also be proposed for the various current issues and for the implementation of these same solutions. All this final work will be part of a "proof-of-concept" system called "ECU2010". The central element of this system is the before mentioned "Macro" concept, which is an graphical block representing one of many operations required in a automotive system having arithmetic, logic, filtering, integration, multiplexing functions among others. The end result of the proposed work is a single tool, fully integrated, enabling the development and management of the entire system in one simple visual interface. Part of the presented result relies on a hardware platform fully adapted to the software, as well as enabling high flexibility and scalability in addition to using exactly the same technology for ECU, data logger and peripherals alike. Current systems rely on a mostly evolutionary path, only allowing online calibration of parameters, but never the online alteration of their own automotive functionality algorithms. By contrast, the system developed and described in this thesis had the advantage of following a "clean-slate" approach, whereby everything could be rethought globally. In the end, out of all the system characteristics, "LIVE-Prototyping" is the most relevant feature, allowing the adjustment of automotive algorithms (eg. Injection, ignition, lambda control, etc.) 100% online, keeping the engine constantly working, without ever having to stop or reboot to make such changes. This consequently eliminates any "turnaround delay" typically present in current automotive systems, thereby enhancing the efficiency and handling of such systems.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

Pathways of oxidative degradation of wine

The production of color/flavor compounds in wine is the result of different interrelated mechanism reactions. Among these, the oxidation phenomenon and the Maillard reaction stands out with particular relevance due to their large impact on the sensory quality of wines and consequently on the product shelflife. The aim of this thesis is to achieve a global vision of wine degradation mechanisms. The identification of mediators’ reactions involved in oxidative browning and aromatic degradation will be attempted based on different detectors. Two approaches are implemented in this work: a “non-target” approach by which relevant analytical tools will be used to merge the information of cyclic voltammetry and Diode-Array (DAD) detectors, allowing a broader overview of the system and the note of interesting compounds, and a “target” approach by which the identification and quantification of the different compounds related to the wine degradation process will be performed using different detectors (HPLC-UV/Vis, LC-MS, GC-MS, and FID). Two different patterns of degradation will be used in this study: wines generated by O2 and temperature perturbations, and synthetic solutions with relevant wine constituents for mechanisms validation. Results clearly demonstrate a “convolution” of chemical mechanisms. The presence of oxygen combined with temperature had a synergistic effect on the formation of several key odorant compounds.The results of this work could be translated to the wine-making and wine-storage environment from the modelling of the analysed compounds.

Regional and urban air quality modelling under a climate change scenario

The better understanding of the interactions between climate change and air quality is an emerging priority for research and policy. Climate change will bring changes in the climate system, which will affect the concentration and dispersion of air pollutants. The main objective of the current study is to assess the impacts of climate change on air quality in 2050 over Portugal and Porto urban area. First, an evaluation and characterization of the air quality over mainland Portugal was performed for the period between 2002 and 2012. The results show that NO2, PM10 and O3 are the critical pollutants in Portugal. Also, the influence of meteorology on O3, NO2 and PM10 levels was investigate in the national main urban areas (Porto and Lisboa) and was verified that O3 has a statistically significant relationship with temperature in most of the components. The results also indicate that emission control strategies are primary regulators for NO2 and PM10 levels. After, understanding the national air quality problems and the influence that meteorology had in the historical air quality levels, the air quality modelling system WRF-CAMx was tested and the required inputs for the simulations were prepared to fulfil the main goal of this work. For the required air quality modelling inputs, an Emission Projections under RCP scenarios (EmiPro-RCP) model was developed to assist the estimation of future emission inventories for GHG and common air pollutants. Also, the current emissions were estimated for Portugal with a higher detailed disaggregation to improve the performance of the air quality simulations. The air quality modelling system WRF/CAMx was tested and evaluated over Portugal and Porto urban area and the results point out that is an adequate tool for the analysis of air quality under climate change. For this purpose, regional simulations of air quality during historical period and future (2045-2050) were conducted with CAMx version 6.0 to evaluate the impacts of simulated future climate and anthropogenic emission projections on air quality over the study area. The climate and the emission projections were produced under the RCP8.5 scenario. The results from the simulations point out, that if the anthropogenic emissions keep the same in 2050, the concentrations of NO2, PM10 and O3 will increase in Portugal. When, besides the climate change effects, is consider the projected anthropogenic emissions the annual mean concentrations of NO2 decrease significantly in Portugal and Porto urban area, and on the contrary the annual mean PM10 concentrations increases in Portugal and decrease in Porto urban area. The O3 results are mainly caused by the reduction of ozone precursors, getting the higher reductions in urban areas and increases in the surrounding areas. All the analysis performed for both simulations for Porto urban area support that, for PM10 and O3, there will be an increase in the occurrence of extreme values, surpassing the annual legislated parameters and having more daily exceedances. This study constitutes an innovative scientific tool to help in future air quality management in order to mitigate future climate change impacts on air quality.

Design e desenvolvimento de equipamentos de iluminação técnica

Este documento é uma sinopse das atividades desenvolvidas e, conhecimentos adquiridos ao longo do estágio na empresa Lightenjin, Sistemas de Iluminação, Lda. e, surge em forma de relatório de projeto. O primeiro projeto foi o desenvolvimento de uma família de candeeiros. O segundo e principal projeto foi a criação e desenvolvimento de um projetor para aplicação em calha eletrificada, com as devidas restrições do Project brief apresentado pela empresa. O terceiro projeto foi o desenvolvimento de um projetor Downlight de encastrar. Houve outras tarefas ligadas à modelação de componentes, desenhos técnicos, manuais de instruções, fichas técnicas e prototipagem rápida. Em todos os projetos foi utilizada a metodologia de trabalho apresentada.

Characterisation of the cyclic behaviour of reinforced concrete elements with plain bars

Sismos recentes comprovam a elevada vulnerabilidade dos edifícios existentes de betão armado. A resposta das estruturas aos sismos é fortemente condicionada pelas características da aderência aço-betão, que exibe degradação das propriedades iniciais quando sujeitas a carregamentos cíclicos e alternados. Este fenómeno é ainda mais gravoso para elementos com armadura lisa, predominantes na maioria das estruturas construídas até à década de 70 nos países do sul da Europa. A prática corrente de conceção, dimensionamento e pormenorização das estruturas antigas leva a que tenham características de comportamento e níveis de segurança associados não compatíveis com as exigências atuais. Os estudos realizados sobre o comportamento cíclico de elementos estruturais de betão armado com armadura lisa são ainda insuficientes para a completa caracterização deste tipo de elementos. Esta tese visou a caraterização da relação tensão de aderência versus escorregamento para elementos estruturais com armadura lisa e o estudo da resposta cíclica de pilares e nós viga-pilar de betão armado com armadura lisa. Foram realizados dez séries de ensaios de arrancamento (nove monotónicos e um cíclico) em provetes com varões lisos. Os resultados destes ensaios permitiram propor novas expressões empíricas para a estimativa dos parâmetros usados num modelo disponível na literatura para representação da relação tensão de aderência versus escorregamento. É ainda proposto um novo modelo monotónico para a relação tensão de aderência versus escorregamento que representa melhor a resposta após a resistência máxima de aderência. Uma campanha de ensaios unidirecionais em pilares e nós viga-pilar foi também realizada com o objetivo principal de caracterizar o comportamento cíclico deste tipo de elementos. No total foram realizados oito ensaios em pilares, sete ensaios em nós viga-pilar interiores e seis ensaios em nós viga-pilar exteriores representativos de estruturas antigas de betão armado com armadura lisa. Os resultados experimentais permitiram avaliar a influência do escorregamento e estudar o mecanismo de corte em nós e a evolução dos danos para elementos com armadura lisa. Com base nos resultados experimentais foi proposta uma adaptação na expressão do Eurocódigo 8-3 para o cálculo da capacidade última de rotação de elementos com armadura lisa. Foi também desenvolvido um estudo paramétrico, com diferentes estratégias de modelação não linear, para a simulação da resposta de pilares considerando o escorregamento da armadura lisa. Por último, foi proposto um novo modelo simplificado trilinear para o aço que contempla o efeito do escorregamento da armadura lisa.

Piezoelectricity and ferroelectricity in amino acid glycine

Bioorganic ferroelectrics and piezoelectrics are becoming increasingly important in view of their intrinsic compatibility with biological environment and biofunctionality combined with strong piezoelectric effect and switchable polarization at room temperature. Here we study piezoelectricity and ferroelectricity in the smallest amino acid glycine, representing a broad class of non-centrosymmetric amino acids. Glycine is one of the basic and important elements in biology, as it serves as a building block for proteins. Three polymorphic forms with different physical properties are possible in glycine (α, β and γ), Of special interest for various applications are non-centrosymmetric polymorphs: β-glycine and γ-glycine. The most useful β-polymorph being ferroelectric took much less attention than the other due to its instability under ambient conditions. In this work, we could grow stable microcrystals of β-glycine by the evaporation of aqueous solution on a (111)Pt/Ti/SiO2/Si substrate as a template. The effects of the solution concentration and Pt-assisted nucleation on the crystal growth and phase evolution were characterized by X-ray diffraction analysis and Raman spectroscopy. In addition, spin-coating technique was used for the fabrication of highly aligned nano-islands of β-glycine with regular orientation of the crystallographic axes relative the underlying substrate (Pt). Further we study both as-grown and tip-induced domain structures and polarization switching in the β-glycine molecular systems by Piezoresponse Force Microscopy (PFM) and compare the results with molecular modeling and computer simulations. We show that β-glycine is indeed a room-temperature ferroelectric and polarization can be switched by applying a bias to non-polar cuts via a conducting tip of atomic force microscope (AFM). Dynamics of these in-plane domains is studied as a function of applied voltage and pulse duration. The domain shape is dictated by both internal and external polarization screening mediated by defects and topographic features. Thermodynamic theory is applied to explain the domain propagation induced by the AFM tip. Our findings suggest that β-glycine is a uniaxial ferroelectric with the properties controlled by the charged domain walls which in turn can be manipulated by external bias. Besides, nonlinear optical properties of β-glycine were investigated by a second harmonic generation (SHG) method. SHG method confirmed that the 2-fold symmetry is preserved in as-grown crystals, thus reflecting the expected P21 symmetry of the β-phase. Spontaneous polarization direction is found to be parallel to the monoclinic [010] axis and directed along the crystal length. These data are confirmed by computational molecular modeling. Optical measurements revealed also relatively high values of the nonlinear optical susceptibility (50% greater than in the z-cut quartz). The potential of using stable β-glycine crystals in various applications are discussed in this work.

Modelação ecológica no estuário do Sado

Os modelos matemáticos são ferramentas poderosas para avaliar o impacto humano em sistemas costeiros e estuarinos de estrutura complexa. Neste artigo utiliza-se um sistema de modelos matemáticos para simular o comportamento hidrodinâmico e biológico do estuário do Sado. Estudos experimentais de análise da evolução da biomassa de fitoplâncton durante os últimos 10 anos indicam que o ecossistema se encontra numa situação relarivamente estável, exibindo pouca tendência para a eutrofização (Cabeçadas, 1993). Neste Artigo procura-se caracterizar o estado trófico do sistema, confirmar as conclusões obtidas experimentalmente e interpretar os processos que ocorrem na região do estuário.

Análise do risco associado à rotura da barragem de Fernandilho. Modelação hidrodinâmica da onda de cheia

As cheias provocadas por roturas de barragens constituem eventos catastróficos que podem conduzir a perdas consideráveis de vidas humanas e de bens materiais. Para melhorar a segurança, em relação a este risco potencial, torna-se necessário avaliar a segurança da população e das estruturas, existentes ou a construir, e estimar a extensão dos danos em caso de acidente. Neste estudo, após a indicação da legislação em vigor, apresenta-se uma descrição sumária do modelo DamBreak. Descrevem-se as equações básicas que definem o modelo de formação da brecha e que caracterizam o processo de formação da cheia. Também se referem as equações de Saint-Venant, as quais caracterizam o processo de propagação da cheia. De seguida é feita uma descrição da barragem de Fernandilho, do leito do Barranco d

Calibração de um sistema de modelação para o estuário do Guadiana

Com a entrada em funcionamento da barragem do Alqueva o regime de caudais no rio Guadiana irá ser alterado. Actualmente a albufeira do Alqueva encontra-se em fase de enchimento sendo garantido um caudal mínimo de 5 a 10m3/s que passa para o estuário. Neste cenário torna-se importante conhecer o comportamento das principais variáveis físicas que caracterizam o estuário do Guadiana, nomeadamente níveis, correntes salinidade e transito de sedimentos. Neste artigo utiliza-se o sistema de modelação MOHID, efectuando-se a calibração do modelo para as medidas de campo disponíveis. Esta tarefa insere-se num trabalho de modelação mais amplo de caracterização do Guadiana do ponto de vista hidrodinâmico e de transporte de propriedades.

Modelação lagrangeana dos processos de transporte na Ria Formosa

Apresenta-se um modelo de advecção-difusão do tipo Lagrangeano para a simulação da dispersão de massas de água provenientes de fontes pontuais e descreve-se o modelo hidrodinâmico usado na simulação do escoamento. Estes modelos são utilizados para a caracterização hidrodinâmica da Ria Formosa do ponto de vista da qualidade da água. Tentam-se encontrar razões para os problemas associados aos viveiros de bivalves, sugerindo-se formas de melhorar a qualidade da água.

Modelação da qualidade microbiológica da água na Ria Formosa

Este estudo integra-se numa avaliação hidrodinâmica e monitorização microbiológica da qualidade da água da Ria Formosa. A monitorização foi implementada pela DRAOT Algarve com a colaboração da EST, da FCMA e do IST. A metodologia utilizada consiste na aplicação de um modelo matemático para simulação das variáveis hidrodinâmicas e da qualidade da água. Utilizam-se como traçadores os coliformes fecais (CF), considerados indicadores de contaminação fecal pelo Dec-Lei 236/98 de 1 de Agosto, relativo à qualidade de águas do litoral e salobras para fins aquícolas- águas conquícolas. As águas da ria são usadas para cultura de diversas espécies conquícolas de bivalves. Estes são organismos que filtram e retêm no seu interior material particulado existente em suspensão na água tais como os CF entre outros microorganismos presentes na água. Para avaliar a concentração de coliformes nos bivalves e gastrópodes foi desenvolvido um modelo que simula a bioacumulação desta propriedade por parte do bivalve. Da sua aplicação permite classificar a Ria em várias classes conforme o estabelecido no Dec. Lei nº 293/98 de 18 de Setembro.