Non-contact measurement of respiratory function and deduction of tidal volume

 This paper further the investigation of Doppler radar feasibility in measuring the flow in and out due to inhalation and exhalation under different conditions of breathing activities. Three different experiment conditions were designed to investigate the feasibility and consistency of Doppler radar which includes the combination of the states of normal breathing, deep breathing and apnoea state were demonstrated. The obtained Doppler radar signals were correlated and compared with the gold standard medical device, spirometer, yielding a good correlations between both devices. We also demonstrated the calibration of the Doppler radar signal can be performed in a simple manner in order to have a good agreements with the spirometer readings. The measurement of the flow in and out during the breathing activities can be measured accurately under different dynamics of breathing as long as the calibration is performed correctly.

In vitro Activity of Daptomycin, Linezolid and Rifampicin on Staphylococcus epidermidis Biofilms

Owing to their massive use, Staphylococcus epidermidis has recently developed significant resistance to several antibiotics, and became one of the leading causes of hospital-acquired infections. Current antibiotics are typically ineffective in the eradication of bacteria in biofilm-associated persistent infections. Accordingly, the paucity of effective treatment against cells in this mode of growth is a key factor that potentiates the need for new agents active in the prevention or eradication of biofilms. Daptomycin and linezolid belong to the novel antibiotic therapies that are active against gram-positive cocci. on the other hand, rifampicin has been shown to be one of the most potent, prevalent antibiotics against S. epidermidis biofilms. Therefore, the main aim of this study was to study the susceptibility of S. epidermidis biofilm cells to the two newer antimicrobial agents previously mentioned, and compare the results obtained with the antimicrobial effect of rifampicin, widely used in the prevention/treatment of indwelling medical device infections. To this end the in vitro activities of daptomycin, linezolid, and rifampicin on S. epidermidis biofilms were accessed, using these antibiotics at MIC and peak serum concentrations. The results demonstrated that at MIC concentration, rifampicin was the most effective antibiotic tested. At peak serum concentration, both strains demonstrated similar susceptibility to rifampicin and daptomycin, with colony-forming units (CFUs) reductions of approximately 3-4 log(10), with a slightly lower response to linezolid, which was also more strain dependent. However, considering all the parameters studied, daptomycin was considered the most effective antibiotic tested, demonstrating an excellent in vitro activity against S. epidermidis biofilm cells. In conclusion, this antibiotic can be strongly considered as an acceptable therapeutic option for S. epidermidis biofilm-associated infections and can represent a potential alternative to rifampicin in serious infections where rifampicin resistance becomes prevalent.

Filtros acústicos em cristais fonônicos

In this work, we have studied the acoustic phonon wave propagation within the periodic and quasiperiodic superlattices of Fibonacci type. These structures are formed by phononic crystals, whose periodicity allows the raise of regions known as stop bands, which prevent the phonon propagation throughout the structure for specific frequency values. This phenomenon allows the construction of acoustic filters with great technological potential. Our theoretical model were based on the method of the transfer matrix, thery acoustics phonons which describes the propagation of the transverse and longitudinal modes within a unit cell, linking them with the precedent cell in the multilayer structure. The transfer matrix is built taking into account the elastic and electromagnetic boundary conditions in the superllatice interfaces, and it is related to the coupled differential equation solutions (elastic and electromagnetic) that describe each model under consideration. We investigated the piezoelectric properties of GaN and AlN the nitride semiconductors, whose properties are important to applications in the semiconductor device industry. The calculations that characterize the piezoelectric system, depend strongly on the cubic (zinc-bend) and hexagonal (wurtzite) crystal symmetries, that are described the elastic and piezoelectric tensors. The investigation of the liquid Hg (mercury), Ga (gallium) and Ar (argon) systems in static conditions also using the classical theory of elasticity. Together with the Euler s equation of fluid mechanics they one solved to the solid/liquid and the liquid/liquid interfaces to obtain and discuss several interesting physical results. In particular, the acoustical filters obtained from these structures are again presented and their features discussed

Candida species: Current epidemiology, pathogenicity, biofilm formation, natural antifungal products and new therapeutic options

The incidence of fungal infections has increased significantly, so contributing to morbidity and mortality. This is caused by an increase in antimicrobial resistance and the restricted number of antifungal drugs, which retain many side effects. Candida species are major human fungal pathogens that cause both mucosal and deep tissue infections. Recent evidence suggests that the majority of infections produced by this pathogen are associated with biofilm growth. Biofilms are biological communities with a high degree of organization, in which micro-organisms form structured, coordinated and functional communities. These biological communities are embedded in a self-created extracellular matrix. Biofilm production is also associated with a high level of antimicrobial resistance of the associated organisms. The ability of Candida species to form drugresistant biofilms is an important factor in their contribution to human disease. The study of plants as an alternative to other forms of drug discovery has attracted great attention because, according to the World Health Organization, these would be the best sources for obtaining a wide variety of drugs and could benefit a large population. Furthermore, silver nanoparticles, antibodies and photodynamic inactivation have also been used with good results. This article presents a brief review of the literature regarding the epidemiology of Candida species, as well as their pathogenicity and ability to form biofilms, the antifungal activity of natural products and other therapeutic options. © 2013 SGM.

Staphylococcus epidermidis biofilms control by N-acetylcysteine and rifampicin

Medical device-associated infections caused by Staphylococcus epidermidis usually involve biofilm formation and its eradication is particularly challenging. Although rifampicin has been proving to be one of the most effective antibiotics against S. epidermidis biofilms, its use as a single agent can lead to the acquisition of resistance. Therefore, we assessed the combined effect of rifampicin with N-acetylcysteine (NAC) known by its mucolytic effect, in the control of S. epidermidis biofilms. Biofilms of 2 S. epidermidis strains (9142 and 1457) were treated with 1× minimum inhibitory concentration (4 mg/mL) and 10× minimum inhibitory concentration (40 mg/mL) of NAC and 10 mg/L (peak serum) of rifampicin alone and in combination. NAC at 40 mg/L alone or in combination with rifampicin (10 mg/L) significantly reduced (4 log 10) the number of biofilm cells. Considering their different modes of action, the association of NAC with rifampicin constitutes a promising therapeutic strategy in the treatment of infections associated to S. epidermidis biofilms. © 2013 Lippincott Williams & Wilkins.

An HPLC-UV method for the quantification of zidovudine in rat plasma

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sobre a implantação de boas práticas de distribuição de produtos médicos de acordo com a RDC nº 59 de 27 de junho de 2000 - ANVISA e NBR ISO 9001:2000

Pós-graduação em Ciências Farmacêuticas - FCFAR

New polymeric materials for vascular surgery

The dramatic impact that vascular diseases have on human life quality and expectancy nowadays is the reason why both medical and scientific communities put great effort in discovering new and effective ways to fight vascular pathologies. Among the many different treatments, endovascular surgery is a minimally-invasive technique that makes use of X-ray fluoroscopy to obtain real-time images of the patient during interventions. In this context radiopaque biomaterials, i.e. materials able to absorb X-ray radiation, play a fundamental role as they are employed both to enhance visibility of devices during interventions and to protect medical staff and patients from X-ray radiations. Organic-inorganic hybrids are materials that combine characteristics of organic polymers with those of inorganic metal oxides. These materials can be synthesized via the sol-gel process and can be easily applied as thin coatings on different kinds of substrates. Good radiopacity of organic-inorganic hybrids has been recently reported suggesting that these materials might find applications in medical fields where X-ray absorption and visibility is required. The present PhD thesis aimed at developing and characterizing new radiopaque organic-inorganic hybrid materials that can find application in the vascular surgery field as coatings for the improvement of medical devices traceability as well as for the production of X-ray shielding objects and garments. Novel organic-inorganic hybrids based on different polyesters (poly-lactic acid and poly-ε-caprolactone) and polycarbonate (poly-trimethylene carbonate) as the polymeric phase and on titanium oxide as the inorganic phase were synthesized. Study of the phase interactions in these materials allowed to demonstrate that Class II hybrids (where covalent bonds exists between the two phases) can be obtained starting from any kind of polyester or polycarbonate, without the need of polymer pre-functionalization, thanks to the occurrence of transesterification reactions operated by inorganic molecules on ester and carbonate moieties. Polyester based hybrids were successfully coated via dip coating on different kinds of textiles. Coated textiles showed improved radiopacity with respect to the plain fabric while remaining soft to the touch. The hybrid was able to coat single fibers of the yarn rather than coating the yarn as a whole. Openings between yarns were maintained and therefore fabric breathability was preserved. Such coatings are promising for the production of light-weight garments for X-ray protection of medical staff during interventional fluoroscopy, which will help preventing pathologies that stem from chronic X-ray exposure. A means to increase the protection capacity of hybrid-coated fabrics was also investigated and implemented in this thesis. By synthesizing the hybrid in the presence of a suspension of radiopaque tantalum nanoparticles, PDMS-titania hybrid materials with tunable radiopacity were developed and were successfully applied as coatings. A solution for enhancing medical device radiopacity was also successfully investigated. High metal radiopacity was associated with good mechanical and protective properties of organic-inorganic hybrids in the form of a double-layer coating. Tantalum was employed as the constituent of the first layer deposited on sample substrates by means of a sputtering technique. The second layer was composed of a hybrid whose constituents are well-known biocompatible organic and inorganic components, such as the two polymers PCL and PDMS, and titanium oxide, respectively. The metallic layer conferred to the substrate good X-ray visibility. A correlation between radiopacity and coating thickness derived during this study allows to tailor radiopacity simply by controlling the metal layer sputtering deposition time. The applied metal deposition technique also permits easy shaping of the radiopaque layer, allowing production of radiopaque markers for medical devices that can be unambiguously identified by surgeons during implantation and in subsequent radiological investigations. Synthesized PCL-titania and PDMS-titania hybrids strongly adhered to substrates and show good biocompatibility as highlighted by cytotoxicity tests. The PDMS-titania hybrid coating was also characterized by high flexibility that allows it to stand large substrate deformations without detaching nor cracking, thus being suitable for application on flexible medical devices.

La responsabilità civile da prodotto farmaceutico

Il tema della ricerca ha riguardato preliminarmente la definizione di farmaco descritta nel d.lgs. n. 219 del 2006 (Codice dei farmaci per uso umano). Oltre al danno prodotto da farmaci, la ricerca ha approfondito anche la tutela ex ante ed ex post riguardante la produzione di dispositivi medici (Direttiva della Comunità Economica Europea n. 42 del 1993 e Direttiva della Comunità Economica Europea n. 374 del 1985). E’ stato necessario soffermarsi sull’analisi del concetto di precauzione per il quale nell’ambito di attività produttive, come quelle che cagionano inquinamento ambientale, o “pericolose per la salute umana” come quelle riguardanti la produzione di alimenti e farmaci, è necessario eliminare i rischi non conosciuti nella produzione di questi ultimi al fine di garantire una tutela completa della salute. L’analisi della Direttiva della Comunità Economica Europea n. 374 del 1985 nei suoi aspetti innovativi ha riguardato l’esame dei casi di danno da farmaco (Trib. Roma, 20 Giugno 2002, Trib. Roma 27 Giugno 1987, Trib. Milano 19 Novembre 1987, Cassazione Civile n. 6241 del 1987): profilo critico è quello riguardante la prova liberatoria, mentre l'art. 2050 prevede che «si debbano adottare tutte le misure necessarie per evitare il danno», l'art. 118, lett. e), c. cons.) prevede una serie di casi di esonero di responsabilità del produttore (tra cui il rischio di sviluppo). Dall'analisi emerge poi la necessità da parte del produttore di continuo utilizzo del duty to warn (Art. 117 del Codice del Consumo lett. A e B ): esso consiste nel dovere continuo di informazione del produttore tramite i suoi rappresentanti e il bugiardino presente nelle confezioni dei farmaci. Tale dovere è ancor più importante nel caso della farmacogenetica, infatti, al fine di evitare reazioni avverse nel bugiardino di alcuni farmaci verrà prescritta la necessità di effettuare un test genetico prima dell’assunzione.

Ricerca di nuove strategie differenziative: Analisi degli effetti di stimoli fisici e molecolari su cellule mesenchimali umane isolate da tessuto adiposo

Introduzione. Le cellule mesenchimali derivate dal tessuto adiposo (hASC) rappresentano un importante strumento per la terapia cellulare, in quanto derivano da un tessuto adulto abbondante e facilmente reperibile. Con il dispositivo medico Lipogems l’isolamento di tali cellule è eseguito esclusivamente mediante sollecitazioni meccaniche. Il prodotto ottenuto è quindi minimamente manipolato e subito utilizzabile. Ad oggi, il condizionamento pro-differenziativo delle staminali è per lo più attuato mediante molecole di sintesi. Tuttavia, altri fattori possono modulare la fisiologia cellulare, come gli stimoli fisici e molecole naturali. Onde elettromagnetiche hanno indotto in modelli cellulari staminali l’espressione di alcuni marcatori di differenziamento e, in cellule adulte, una riprogrammazione, mentre estratti embrionali di Zebrafish sono risultati antiproliferativi sia in vitro che in vivo. Metodi. La ricerca di nuove strategie differenziative sia di natura fisica che molecolare, nel particolare onde acustiche ed estratti embrionali di Zebrafish, è stata condotta utilizzando come modello cellulare le hASC isolate con Lipogems. Onde acustiche sono state somministrate mediante l’utilizzo di due apparati di trasduzione, un generatore di onde meccaniche e il Cell Exciter . I trattamenti con gli estratti embrionali sono stati effettuati utilizzando diverse concentrazioni e diversi tempi sperimentali. Gli effetti sull’espressione dei marcatori di staminalità e differenziamento relativi ai trattamenti sono stati saggiati in RT-PCR quantitativa relativa e/o in qPCR. Per i trattamenti di tipo molecolare è stata valutata anche la proliferazione. Risultati e conclusioni. La meta-analisi dei dati delle colture di controllo mostra la stabilità d’espressione genica del modello. I trattamenti con i suoni inducono variazioni dell’espressione genica, suggerendo un ruolo regolatorio di tali stimoli, in particolare del processo di commitment cardiovascolare. Due degli estratti embrionali di Zebrafish testati inibiscono la proliferazione alle 72 ore dalla somministrazione. L’analisi d’espressione associata ai trattamenti antiproliferativi suggerisce che tale effetto abbia basi molecolari simili ai processi di differenziamento.

Information and communication technologies nella gestione integrata del diabete mellito: stato dell'arte, progetto Metabo come caso di studio

Il Diabete, modello paradigmatico delle malattie croniche, sta assumendo negli ultimi anni le proporzioni di una pandemia, che non ha intenzione di arrestarsi, ma del quale, con l’aumento dei fattori di rischio, aumentano prevalenza e incidenza. Secondo stime autorevoli il numero delle persone con diabete nel 2035 aumenterà fino a raggiungere i 382 milioni di casi. Una patologia complessa che richiede lo sforzo di una vasta gamma di professionisti, per ridurre in futuro in maniera significativa i costi legati a questa patologia e nel contempo mantenere e addirittura migliorare gli standard di cura. Una soluzione è rappresentata dall'impiego delle ICT, Information and Communication Technologies. La continua innovazione tecnologica dei medical device per diabetici lascia ben sperare, dietro la spinta di capitali sempre più ingenti che iniziano a muoversi in questo mercato del futuro. Sempre più device tecnologicamente avanzati, all’avanguardia e performanti, sono a disposizione del paziente diabetico, che può migliorare tutti processi della cura, contenendo le spese. Di fondamentale importanza sono le BAN reti di sensori e wearable device, i cui dati diventano parte di un sistema di gestione delle cure più ampio. A questo proposito METABO è un progetto ICT europeo dedicato allo studio ed al supporto di gestione metabolica del diabete. Si concentra sul miglioramento della gestione della malattia, fornendo a pazienti e medici una piattaforma software tecnologicamente avanzata semplice e intuitiva, per aiutarli a gestire tutte le informazioni relative al trattamento del diabete. Innovativo il Clinical Pathway, che a partire da un modello Standard con procedimenti semplici e l’utilizzo di feedback del paziente, viene progressivamente personalizzato con le progressive modificazioni dello stato patologico, psicologico e non solo. La possibilità di e-prescribing per farmaci e device, e-learning per educare il paziente, tenerlo sotto stretto monitoraggio anche alla guida della propria auto, la rendono uno strumento utile e accattivante.

Use of linezolid in neonatal and pediatric inpatient facilities-results of a retrospective multicenter survey

The purpose of this investigation was to describe the use of linezolid in pediatric inpatient facilities. A retrospective multicenter survey including data from nine participating tertiary care pediatric inpatient facilities in Germany and Austria was undertaken. Data on 126 off-label linezolid treatment courses administered to 108 patients were documented. The survey comprises linezolid treatment in a broad spectrum of clinical indications to children of all age groups; the median age was 6.8 years (interquartile range 0.6-15.5 years; range 0.1-21.2 years; ten patients were older than 18 years of age but were treated in pediatric inpatient units). Of the 126 treatment courses, 27 (21%) were administered to preterm infants, 64 (51%) to pediatric oncology patients, and 5% to patients soon after liver transplantation. In 25%, the infection was related to a medical device. Linezolid iv treatment was started after intensive pre-treatment (up to 11 other antibiotics for a median duration of 14 days) and changed to enteral administration in only 4% of all iv courses. In 39 (53%) of 74 courses administered to children older than 1 week and younger than 12 years of age, the dose was not adjusted to age-related pharmacokinetic parameters. In only 17 courses (13%) was a pediatric infectious disease consultant involved in the clinical decision algorithm. Linezolid seemed to have contributed to a favorable outcome in 70% of all treatment courses in this survey. Although retrospective, this survey generates interesting data on the off-label use of linezolid and highlights several important clinical aspects in which the use of this rescue antibiotic in children might be improved.

CT data-based navigation for post-mortem biopsy-a feasibility study

INTRODUCTION: Recent advances in medical imaging have brought post-mortem minimally invasive computed tomography (CT) guided percutaneous biopsy to public attention. AIMS: The goal of the following study was to facilitate and automate post-mortem biopsy, to suppress radiation exposure to the investigator, as may occur when tissue sampling under computer tomographic guidance, and to minimize the number of needle insertion attempts for each target for a single puncture. METHODS AND MATERIALS: Clinically approved and post-mortem tested ACN-III biopsy core needles (14 gauge x 160 mm) with an automatic pistol device (Bard Magnum, Medical Device Technologies, Denmark) were used for probe sampling. The needles were navigated in gelatine/peas phantom, ex vivo porcine model and subsequently in two human bodies using a navigation system (MEM centre/ISTB Medical Application Framework, Marvin, Bern, Switzerland) with guidance frame and a CT (Emotion 6, Siemens, Germany). RESULTS: Biopsy of all peas could be performed within a single attempt. The average distance between the inserted needle tip and the pea centre was 1.4mm (n=10; SD 0.065 mm; range 0-2.3 mm). The targets in the porcine liver were also accurately punctured. The average of the distance between the needle tip and the target was 0.5 mm (range 0-1 mm). Biopsies of brain, heart, lung, liver, pancreas, spleen, and kidney were performed on human corpses. For each target the biopsy needle was only inserted once. The examination of one body with sampling of tissue probes at the above-mentioned locations took approximately 45 min. CONCLUSIONS: Post-mortem navigated biopsy can reliably provide tissue samples from different body locations. Since the continuous update of positional data of the body and the biopsy needle is performed using optical tracking, no control CT images verifying the positional data are necessary and no radiation exposure to the investigator need be taken into account. Furthermore, the number of needle insertions for each target can be minimized to a single one with the ex vivo proven adequate accuracy and, in contrast to conventional CT guided biopsy, the insertion angle may be oblique. Navigation for minimally invasive tissue sampling is a useful addition to post-mortem CT guided biopsy.

Design and Realization of an Energy Harvester Using Pulsating Arterial Pressure

Most medical implants run on batteries, which require costly and tedious replacement or recharging. It is believed that micro-generators utilizing intracorporeal energy could solve these problems. However, such generators do not, at this time, meet the energy requirements of medical implants.This paper highlights some essential aspects of designing and implementing a power source that scavenges energy from arterial expansion and contraction to operate an implanted medical device. After evaluating various potentially viable transduction mechanisms, the fabricated prototype employs an electromagnetic transduction mechanism. The artery is inserted into a laboratory-fabricated flexible coil which is permitted to freely deform in a magnetic field. This work also investigates the effects of the arterial wall's material properties on energy harvesting potential. For that purpose, two types of arteries (Penrose X-ray tube, which behave elastically, and an artery of a Göttinger minipig, which behaves viscoelastically) were tested. No noticeable difference could be observed between these two cases. For the pig artery, average harvestable power was 42 nW. Moreover, peak power was 2.38 μW. Both values are higher than those of the current state of the art (6 nW/16 nW). A theoretical modelling of the prototype was developed and compared to the experimental results.