Royal Canadian Henley Regatta fonds, 1948-1983 (non-inclusive)

In 1903, the Canadian Association of Amateur Oarsmen had their request granted to make the Old Welland Canal at Port Dalhousie the permanent site of the Royal Canadian Henley Regatta. That same year organized rowing was established in St. Catharines when the St. Catharines Rowing and Canoe Club was formed. The Henley course was completed in July of 1903 after rowing was well underway. Although the Henley course served as an athletic and social event, rowing itself was slow to grow in the St. Catharines area. In 1915 the Regatta was cancelled for the duration of WWI and reinstated in 1919 when an increased public interest in the sport began to grow. Two years later, the Henley Aquatic Association was formed in order to control, maintain and improve the rowing facilities. This association was responsible for building a new clubhouse at Ann Street in 1921 and in 1931 completing the grandstands. Also in the 1930s the association had the Federal Government approve their appeal to have the Henley waters dredged for the first time. The St. Catharines Rowing Club re-located its headquarters to the Lakeport Road site. The 1940s brought more support from local groups and with that more events. In 1945, the St. Catharines Junior Chamber of Commerce began helping to organize and promote rowing locally. One of the new events at the Henley course was the "Schoolboy Championships". The growth of both rowing and the Henley continued growing through the 1950s. The Henley Aquatic Association acquired Reid's Island, now Henley Island, mainly through the efforts of Ted Nelson. In the 1960s, rowing really took off in St. Catharines. Women began to become recognized in the sport when Brock University created a women's rowing team. The second dredging was completed in 1964, leading to the creation of a world class rowing course. The facilities were upgraded to international standards and the Henley rowing course became Canada's first Class A FISA (Fédération Internationale des Sociétés d’Aviron or International Federation of Rowing Associations) rowing course. The first North American Rowing Championship was held at the Henley course in 1967 and again in 1970 for the third championship. The Canadian Henley Rowing Corporation formed in 1972, along with the St. Catharines, Parks and Recreation Department created the first rowing school for youth. Since 1960, St. Catharines has been at a competitive level with other International rowing courses. The city continues to produce Olympic level athletes today.

Guide des bonnes pratiques en matière de gouvernance et « Sustainability framework » : l’orientation de l’International Federation of Accountants vers un « capitalisme stakeholder »

Au premier trimestre 2009, le normalisateur mondial de la profession comptable (International Federation of Accountants) a publié deux documents destinés à apporter une aide aux professionnels de la comptabilité et de la finance sur leur prise en compte du développement durable et des parties prenantes d’une entreprise. En premier lieu, l’International Federation of Accountants propose un cadre d’analyse durable. Outil destiné aux comptables et financiers, il vise à faire de ces derniers un maillon essentiel du développement de nouvelles pratiques favorisant une performance économique, sociale et environnementale des entreprises. En second lieu, l’International Federation of Accountants vient de diffuser un guide international des bonnes pratiques en matière de gouvernance d’entreprise complétant les codes de gouvernance existant et ayant pour objectif d’inscrire les entreprises dans une approche stakeholder. A l’heure où la crise financière se fait ressentir et où la finance se trouve décriée pour s’être focalisée sur la valeur actionnariale, la position de l’International Federation of Accountants est révélatrice d’un changement de paradigme non sans conséquence pour la comptabilité, la finance et le droit.

SIDUR: development of an information system, using controlled vocabulary designed to the characterization and sample of population with and without disability, attended by Rehabilitation programs, University of Rosario

Introduction: the statistical record used in the Field Academic Programs (PAC for it’s initials in Spanish) of Rehabilitation denotes generalities in the data conceptualization, which complicates the reliable guidance in making decisions and provides a low support for research in rehabilitation and disability. In response, the Research Group in Rehabilitation and Social Integration of Persons with Disabilities has worked on the creation of a registry to characterize the population seen by Rehabilitation PAC. This registry includes the use of the International Classification of Functioning, Disability and Health (ICF) of the WHO. Methodology: the proposed methodology includes two phases: the first one is a descriptive study and the second one involves performing methodology Methontology, which integrates the identification and development of ontology knowledge. This article contextualizes the progress made in the second phase. Results: the development of the registry in 2008, as an information system, included documentary review and the analysis of possible use scenarios to help guide the design and development of the SIDUR system. The system uses the ICF given that it is a terminology standardization that allows the reduction of ambiguity and that makes easier the transformation of health facts into data translatable to information systems. The record raises three categories and a total of 129 variables Conclusions: SIDUR facilitates accessibility to accurate and updated information, useful for decision making and research.

A concise summary of the International System of Units, the SI

The Bureau International des Poids et Mesures, the BIPM, was established by Article 1 of the Convention du Mètre, on 20 May 1875, and is charged with providing the basis for a single, coherent system of measurements to be used throughout the world. The decimal metric system, dating from the time of the French Revolution, was based on the metre and the kilogram. Under the terms of the 1875 Convention, new international prototypes of the metre and kilogram were made and formally adopted by the first Conférence Générale des Poids et Mesures (CGPM) in 1889. Over time this system developed, so that it now includes seven base units. In 1960 it was decided at the 11th CGPM that it should be called the Système International d’Unités, the SI (in English: the International System of Units). The SI is not static but evolves to match the world’s increasingly demanding requirements for measurements at all levels of precision and in all areas of science, technology, and human endeavour. This document is a summary of the SI Brochure, a publication of the BIPM which is a statement of the current status of the SI. The seven base units of the SI, listed in Table 1, provide the reference used to define all the measurement units of the International System. As science advances, and methods of measurement are refined, their definitions have to be revised. The more accurate the measurements, the greater the care required in the realization of the units of measurement.

Frying of potato chips in a blend of canola oil and palm olein: changes in levels of individual fatty acids and tocols

The changes occurring in the levels of nutritionally relevant oil components were assessed during repeated frying of potato chips in a blend of palm olein and canola oil (1:1 w/w). The blend suffered minimal reductions in omega-3 and omega-6 polyunsaturated fatty acids. There was no significant difference between the fatty acid composition of the oil extracted from the product and that of the frying medium, in all three cases. The blend also contained a significant amount of tocols which add a nutritional value to the oil. The concentration of the tocols was satisfactorily retained over the period of oil usage, in contrast to the significant loses observed in the case of the individual oils. The blend also performed well when assessed by changes in total polar compounds, free fatty acids, p-anisidine value. When fried in used oil, the product oil content increased progressively with oil usage time. This study shows that blended frying oils can combine good stability and nutritional quality

Evaluation of harvested mushrooms and viability of Agaricus bisporus growth using casing materials made from spent mushroom substrate

P>The present work evaluates of harvested mushroom and viability of Agaricus bisporus growth in several casing materials based on spent mushroom substrate. The experiment consisted of eight casing layer, which six were made with spent mushroom substrate. The results confirm the usefulness of reincorporating the spent substrate in new cultivation cycles as an ingredient of casing mixtures. In general, biological efficiency was high, three of the SMS based-casings surpassing the threshold value of 100 kg 100 kg-1 of compost. The high electrical conductivity of mixtures containing a large proportion of spent substrate limits the extent to which it can be used, although mixing it with other materials (such as peat) reduces these values to acceptable levels. In short, it makes economic and environmental sense to reuse spent mushroom substrate as an ingredient of alternative casing materials.

Comparison of polyamine, phenol and flavonoid contents in plants grown under conventional and organic methods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The effects of extrusion conditions and the addition of volatile compounds and flavour enhancers to corn grits on the retention of the volatile compounds and texture of the extrudates

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A mixed-integer LP model for the optimal allocation of voltage regulators and capacitors in radial distribution systems

This paper presents a mixed-integer linear programming model to solve the problem of allocating voltage regulators and fixed or switched capacitors (VRCs) in radial distribution systems. The use of a mixed-integer linear model guarantees convergence to optimality using existing optimization software. In the proposed model, the steady-state operation of the radial distribution system is modeled through linear expressions. The results of one test system and one real distribution system are presented in order to show the accuracy as well as the efficiency of the proposed solution technique. An heuristic to obtain the Pareto front for the multiobjective VRCs allocation problem is also presented. © 2012 Elsevier Ltd. All rights reserved.

Doxycycline hyclate: a review of properties, applications and analytical methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Integration of R&D and new product development: case studies of Brazilian high-tech firms

One of the aspects that influence good performance of new product development (NPD) at high-tech companies is the integration of research and development (R&D) and the other functions involved with NPD. The objective of this paper is to examine why Brazilian medium and large sized high-tech companies are different with respect to the integration of R&D with NPD. An analysis of case studies was conducted at five Brazilian high-tech firms. Among the results, collectivism, which is characteristic of the Brazilian organisational culture, was seen to manifest itself in companies through the adoption of cross-functional teams; the valorisation of personal relations, which is stimulated by physical proximity; and project managers’ ample participation in different functions involving NPD.

Addition of lipolytic enzyme in anaerobic co-digestion of swine manure and inclusion levels of waste vegetable oil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effects of extrusion conditions and the addition of volatile compounds and flavour enhancers to corn grits on the retention of the volatile compounds and texture of the extrudates

Corn grits that were supplemented with isovaleraldehyde, ethyl butyrate, butyric acid and flavour enhancers were extruded under different processing conditions. Volatile compounds retained in the extrudates were isolated by dynamic headspace and analysed using gas chromatographymass spectrometry. The expansion ratio, density and cut force to break down the extrudates were evaluated and aroma intensity was assessed using a multisample difference test. Butyric acid showed the greatest retention (96.4%), regardless of the extrusion conditions. All compounds were better retained when samples were extruded at 20% feed moisture and 90 degrees C processing temperature (2.981.0%), conditions that also resulted in greater aromatic intensity (moderate to moderate-strong intensity). The addition of volatile compounds reduced the expansion ratio and cut force, whereas the addition of flavour enhancers increased the expansion ratio but reduced ethyl butyrate and butyric acid retention.

Effects of specimen geometry and loading mode on crack growth resistance curves of a high-strength pipeline girth weld

This work presents an investigation of the ductile tearing properties for a girth weld made of an API 5L X80 pipeline steel using experimentally measured crack growth resistance curves. Use of these materials is motivated by the increasing demand in the number of applications for manufacturing high strength pipes for the oil and gas industry including marine applications and steel catenary risers. Testing of the pipeline girth welds employed side-grooved, clamped SE(T) specimens and shallow crack bend SE(B) specimens with a weld centerline notch to determine the crack growth resistance curves based upon the unloading compliance (UC) method using the single specimen technique. Recently developed compliance functions and η-factors applicable for SE(T) and SE(B) fracture specimens with homogeneous material and overmatched welds are introduced to determine crack growth resistance data from laboratory measurements of load-displacement records.

Identification of candidate genes and physiological pathways involved in gonad deformation in whitefish (Coregonus spp.) from Lake Thun, Switzerland

In 2000, fishermen reported the appearance of deformed reproductive organs in whitefish (Coregonus spp.) from Lake Thun, Switzerland. Despite intensive investigations, the causes of these abnormalities remain unknown. Using gene expression profiling, we sought to identify candidate genes and physiological processes possibly associated with the observed gonadal deformations, in order to gain insights into potential causes. Using in situ-synthesized oligonucleotide arrays, we compared the expression levels at 21,492 unique transcript probes in liver and head kidney tissue of male whitefish with deformed and normally developed gonads, respectively. The fish had been collected on spawning sites of two genetically distinct whitefish forms of Lake Thun. We contrasted the gene expression profiles of 56 individuals, i.e., 14 individuals of each phenotype and of each population. Gene-by-gene analysis revealed weak expression differences between normal and deformed fish, and only one gene, ictacalcin, was found to be up-regulated in head kidney tissue of deformed fish from both whitefish forms, However, this difference could not be confirmed with quantitative real-time qPCR. Enrichment analysis on the level of physiological processes revealed (i) the involvement of immune response genes in both tissues, particularly those linked to complement activation in the liver, (ii) proteolysis in the liver and (iii) GTPase activity and Ras protein signal transduction in the head kidney. In comparison with current literature, this gene expression pattern signals a chronic autoimmune disease in the testes. Based on the recent observations that gonad deformations are induced through feeding of zooplankton from Lake Thun we hypothesize that a xenobiotic accumulated in whitefish via the plankton triggering autoimmunity as the likely cause of gonad deformations. We propose several experimental strategies to verify or reject this hypothesis.