Effectiveness of incentive/disincentive contract provisions : final report /

"Project ID-H1, FY 93."

Managing inspections for greater productivity.

Winter 1977.

From legal commons to social commons: Brazil and the cultural industry in the 21st century

This article describes some of the current transformations regarding the processes by which information and culture are generated, from the point of view of developing countries. In this brief analysis, the article discusses the role of projects such as Creative Commons for developing countries. It also discusses the idea of legal commons and social commons. While the idea of legal commons can be understood as the voluntary use of licenses such as Creative Commons in order to create a “commons”, the idea of social commons has to do with the tensions between legality and illegality in developing countries. These tensions appear prominently in the so-called global “peripheries”, and in many instances make the legal structure of intellectual property irrelevant, unfamiliar, or unenforceable, for various reasons. With the emergence of digital technology and the Internet, in many places and regions in developing countries (especially in the “peripheries”), technology ended up arriving earlier than the idea of intellectual property. Such a de facto situation propitiated the emergence of cultural industries that were not driven by intellectual property incentives. In these cultural businesses, the idea of “sharing” and of free dissemination of the content is intrinsic to the social circumstances taking place in these peripheries. Also, the appropriation of technology on the part of the “peripheries” ends up promoting autonomous forms of bridging the digital divide, such as the “LAN house” phenomenon discussed below. This paper proposes that many lessons can be learned from the business models emerging from social commons practices in developing countries. The tension between legality and illegality in “peripheral” areas in developing countries is not new. The work of Boaventura de Sousa Santos and others in the 1970s was paradigmatic for the discussion of legal pluralism regarding the occupation of land in Brazil. This paper aims to follow in that same pioneer tradition of studies about legal pluralism, and to apply those principles to the discussion of “intellectual property” rather than the ownership of land.

The Flowchart Model of Cluster Policy: The Automobile Industry Cluster in China

This paper proposes a general model of the flowchart approach to industrial cluster policy and applies this model to Guangzhou's automobile industry cluster. The flowchart approach to industrial cluster policy is an action plan for prioritizing policy measures in a time-ordered series. We reached the following two conclusions. First,we clarified the effects of Honda, Nissan, and Toyota on agglomeration in Guangzhou's automobile industry cluster. Second, we established that local governments play a crucial role in successful industrial cluster policy, and that the mayor of the local government should be offered incentives in order to target industrial clustering and implement cluster policy.

Essays on Competition in the Pharmaceutical Industry

Chapter 1: Patents and Entry Competition in the Pharmaceutical Industry: The Role of Marketing Exclusivity Effective patent length for innovation drugs is severely curtailed because of extensive efficacy and safety tests required for FDA approval, raising concern over adequacy of incentives for new drug development. The Hatch-Waxman Act extends patent length for new drugs by five years, but also promotes generic entry by simplifying approval procedures and granting 180-day marketing exclusivity to a first generic entrant before the patent expires. In this paper we present a dynamic model to examine the effect of marketing exclusivity. We find that marketing exclusivity may be redundant and its removal may increase generic firms' profits and social welfare. Chapter 2: Why Authorized Generics?: Theoretical and Empirical Investigations Facing generic competition, the brand-name companies some-times launch generic versions themselves called authorized generics. This practice is puzzling. If it is cannibalization, it cannot be profitable. If it is divisionalization, it should be practiced always instead of sometimes. I explain this phenomenon in terms of switching costs in a model in which the incumbent first develops a customer base to ready itself against generic competition later. I show that only sufficiently low switching costs or large market size justifies launch of AGs. I then use prescription drug data to test those results and find support. Chapter 3: The Merger Paradox and R&D Oligopoly theory says that merger is unprofitable, unless a majority of firms in industry merge. Here, we introduce R&D opportunities to resolve this so-called merger paradox. We have three results. First, when there is one R&D firm, that firm can profitably merge with any number of non-R&D firms. Second, with multiple R&D firms and multiple non-R&D firms, all R&D firms can profitably merge. Third, with two R&D firms and two non-R&D firms, each R&D firms prefer to merge with a non-R&D firm. With three or more than non-R&D firms, however, the R&D firms prefer to merge with each other.

Essays on competition in the pharmaceutical industry

Chapter 1: Patents and Entry Competition in the Pharmaceutical Industry: The Role of Marketing Exclusivity. Effective patent length for innovation drugs is severely curtailed because of extensive efficacy and safety tests required for FDA approval, raising concern over adequacy of incentives for new drug development. The Hatch-Waxman Act extends patent length for new drugs by five years, but also promotes generic entry by simplifying approval procedures and granting 180-day marketing exclusivity to a first generic entrant before the patent expires. In this paper we present a dynamic model to examine the effect of marketing exclusivity. We find that marketing exclusivity may be redundant and its removal may increase generic firms' profits and social welfare. ^ Chapter 2: Why Authorized Generics?: Theoretical and Empirical Investigations Facing generic competition, the brand-name companies some-times launch generic versions themselves called authorized generics. This practice is puzzling. If it is cannibalization, it cannot be profitable. If it is divisionalization, it should be practiced always instead of sometimes. I explain this phenomenon in terms of switching costs in a model in which the incumbent first develops a customer base to ready itself against generic competition later. I show that only sufficiently low switching costs or large market size justifies launch of AGs. I then use prescription drug data to test those results and find support. ^ Chapter 3: The Merger Paradox and R&D Oligopoly theory says that merger is unprofitable, unless a majority of firms in industry merge. Here, we introduce R&D opportunities to resolve this so-called merger paradox. We have three results. First, when there is one R&D firm, that firm can profitably merge with any number of non-R&D firms. Second, with multiple R&D firms and multiple non-R&D firms, all R&D firms can profitably merge. Third, with two R&D firms and two non-R&D firms, each R&D firms prefer to merge with a non-R&D firm. With three or more than non-R&D firms, however, the R&D firms prefer to merge with each other.^

Managing new product development in the Chinese steel industry: An empirical investigation

This study explores several important aspects of the management of new product development (NPD) in the Chinese steel industry. Specifically it explores NPD success factors, the importance of management functions to new product success and measures of new product success from the perspective of the industry's practitioners. Based on a sample of 190 industrial practitioners from 18 Chinese steel companies, the study provides a mixed picture as China makes the transition from a centrally-controlled to market-based economy. On one hand, respondents ranked understanding users' needs as the most important factor influencing the performance of the new products. Further, formulating new product strategy and strengthening market research are perceived as the most important managerial functions in NPD. However, technical performance measures are regarded as more important and are more widely used in industry than market-based or financial measures of success.

Design of a balanced scorecard-type management system for a back-office department in a bank

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Potential for ORC application in the Portuguese manufacturing industry

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, perfil Gestão e Sistemas Ambientais

Effects of different Incentives on Attrition and Fieldwork Effort in Telephone Household Panel Surveys

Little is known about sample behavior and fieldwork effects of different incentives introduced in a household panel survey. This is especially true for telephone surveys. In a randomized experiment, the Swiss Household Panel implemented one prepaid and two promised nonmonetary incentives in the range of 10 to 15 Swiss Francs (7-10 e), plus a no incentive control group. The aim of the paper is to compare effects of these incentives especially on cooperation, but also on sample selection and fieldwork effort, separated by the household and the subsequent individual level. We find small positive cooperation effects of the prepaid incentive on both the household and the individual level especially in larger households. Sample composition is affected to a very minor extent. Finally, incentives tend to save fieldwork time and partially the number of contacts needed on the individual level.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Three essays in dynamic corporate finance

The three essays constituting this thesis focus on financing and cash management policy. The first essay aims to shed light on why firms issue debt so conservatively. In particular, it examines the effects of shareholder and creditor protection on capital structure choices. It starts by building a contingent claims model where financing policy results from a trade-off between tax benefits, contracting costs and agency costs. In this setup, controlling shareholders can divert part of the firms' cash ows as private benefits at the expense of minority share- holders. In addition, shareholders as a class can behave strategically at the time of default leading to deviations from the absolute priority rule. The analysis demonstrates that investor protection is a first order determinant of firms' financing choices and that conflicts of interests between firm claimholders may help explain the level and cross-sectional variation of observed leverage ratios. The second essay focuses on the practical relevance of agency conflicts. De- spite the theoretical development of the literature on agency conflicts and firm policy choices, the magnitude of manager-shareholder conflicts is still an open question. This essay proposes a methodology for quantifying these agency conflicts. To do so, it examines the impact of managerial entrenchment on corporate financing decisions. It builds a dynamic contingent claims model in which managers do not act in the best interest of shareholders, but rather pursue private benefits at the expense of shareholders. Managers have discretion over financing and dividend policies. However, shareholders can remove the manager at a cost. The analysis demonstrates that entrenched managers restructure less frequently and issue less debt than optimal for shareholders. I take the model to the data and use observed financing choices to provide firm-specific estimates of the degree of managerial entrenchment. Using structural econometrics, I find costs of control challenges of 2-7% on average (.8-5% at median). The estimates of the agency costs vary with variables that one expects to determine managerial incentives. In addition, these costs are sufficient to resolve the low- and zero-leverage puzzles and explain the time series of observed leverage ratios. Finally, the analysis shows that governance mechanisms significantly affect the value of control and firms' financing decisions. The third essay is concerned with the documented time trend in corporate cash holdings by Bates, Kahle and Stulz (BKS,2003). BKS find that firms' cash holdings double from 10% to 20% over the 1980 to 2005 period. This essay provides an explanation of this phenomenon by examining the effects of product market competition on firms' cash holdings in the presence of financial constraints. It develops a real options model in which cash holdings may be used to cover unexpected operating losses and avoid inefficient closure. The model generates new predictions relating cash holdings to firm and industry characteristics such as the intensity of competition, cash flow volatility, or financing constraints. The empirical examination of the model shows strong support of model's predictions. In addition, it shows that the time trend in cash holdings documented by BKS can be at least partly attributed to a competition effect.

Effects of mergers and acquisitions in the paper industry

Paperiteollisuus on ollut perinteisesti fragmentoitunut toimiala, mutta viime vuosikymmenen aikana konsolidoitumisprosessi on kiihtynyt. Yrityskaupat ja fuusiot ovat muuttaneet paperiteollisuuden markkinarakennetta merkittävästi. Työn tavoitteena oli tutkia yleisesti markkinarakenteen vaikutusta liiketoiminnan tuloksiin sekä analysoida yrityskauppojen ja fuusioiden syitä, tuloksia ja rajoituksia. Tavoitteena oli myös tutkia paperiteollisuuden konsolidoitumisen vaikutuksia hintakehitykseen, hintaheilahteluihin ja kannattavuuteen. Keskeisenä syynä konsolidoitumiskehitykselle voidaan pitää uusien paperikoneiden huomattavaa investointikustannusten kasvua. Toinen tärkeä tekijä yhdentymiskehitykselle on se, että paperiteollisuus on saavuttanut elinkaaren kypsyysvaiheen Euroopassa, Pohjois-Amerikassa ja Japanissa. Yrityskauppojen ja fuusioiden motiiveja paperiteollisuudessa ovat mm. kasvu kypsillä markkinoilla, tarve parantaa taloudellista tulosta, mahdollisuus toimia globaalisti ja hyödyntää siitä saatavat edut tai mahdollisuus parempaan arvoketjun hallintaan. Näyttää siltä, että suurempien paperiteollisuusyritysten kannattavuus ei ole parempi kuin pienemmillä yrityksillä. Lisäksi useimmissa paperiteollisuuden yrityskaupoissa ja fuusioissa näyttäisi ostavan osapuolen kurssikehitys ilmoitusta seuraavana päivänä olevan negatiivinen.

Inventory management in public sector electrical industry in Kerala

The thesis entitled Inventory Management In Public Sector Electrical Industry In Kerala. Investigations were carried out on inventory management in public sector electrical industry in Kerala and suggest methods to improve their efficiency. Various aspects of inventory management, its scope and need in industry are detailed. The objectives of the present study concentrates to get an overall view of the system of inventory management, assess the positions and levels of inventory. It analyzes the inventory management policies and practices, the organizational set-up for materials by the electrical undertakings. The study examines the liquidity of the electrical undertakings as well as techniques of inventory management in the electrical industry in Kerala. Hypotheses state that the existing organizational systems and practices are inadequate to ensure efficient management of inventories in electrical industry. Introduction of scientific inventory techniques has a favourable effect on the workings of inventory departments. The financial performance of the public sector electrical undertakings is not at all satisfactory on account of the high raw material costs, heavy borrowings and huge interest burdens. The scope of this study is limited to the assessment of savings, in inventories of electrical products due to inventory management. The methodology of the study is to project the cost reduction of the inventory department on the basis of data collected and to validate this projection with the aid of analysis and survey. The limitations of the study is that the data obtained relate to the period 1989-90 and earlier and the current position is not available and uniform norms cannot be applied to evaluate different inventory management organisation.

Are local economic development incentives promoting job growth? An empirical case study

At a time when cities are competing with one another to attract or retain jobs within a globalizing economy, city governments are providing an array of financial incentives to stimulate job growth and retain existing jobs, particularly in high cost locations. This paper provides the first systematic and comprehensive analysis of datasets on economic development incentives in New York City over the last fifteen years. The evidence on job retention and creation is mixed. Although many companies do not meet their agreed-upon job targets in absolute terms, the evidence suggests that companies receiving subsidies outperform their respective industries in terms of employment growth, that is, the grow more, or decline less. We emphasize that this finding is difficult to interpret, since firms receiving incentives may not be representative of the industry as a whole. In other words, their above-average performance may simply reflect the fact that the Economic Development Corporation (EDC) selects economically promising companies within manufacturing (or other industries) when granting incentives. At the same time, it is also possible that receiving incentives helps these companies to become stronger.