A Submission to the Joint Standing Committee on Treaties on the Anti-Counterfeiting Trade Agreement 2011 (# ACTA)

���If Hollywood could order intellectual property laws for Christmas, what would they look like? This is pretty close.��� David Fewer ���While European and American IP maximalists have pushed for TRIPS-Plus provisions in FTAs and bilateral agreements, they are now pushing for TRIPS-Plus-Plus protections in these various forums.��� Susan Sell ���ACTA is a threat to the future of a free and open Internet.��� Alexander Furnas ���Implementing the agreement could open a Pandora's box of potential human rights violations.��� Amnesty International. ���I will not take part in this masquerade.��� Kader Arif, Rapporteur for the Anti-Counterfeiting Trade Agreement 2011 in the European Parliament Executive Summary As an independent scholar and expert in intellectual property, I am of the view that the Australian Parliament should reject the adoption of the Anti-Counterfeiting Trade Agreement 2011. I would take issue with the Department of Foreign Affairs and Trade���s rather partisan account of the negotiations, the consultations, and the outcomes associated with the Anti-Counterfeiting Trade Agreement 2011. In my view, the negotiations were secretive and biased; the local consultations were sometimes farcical because of the lack of information about the draft texts of the agreement; and the final text of the Anti-Counterfeiting Trade Agreement 2011 is not in the best interests of Australia, particularly given that it is a net importer of copyright works and trade mark goods and services. I would also express grave reservations about the quality of the rather pitiful National Interest Analysis ��� and the lack of any regulatory impact statement ��� associated with the Anti-Counterfeiting Trade Agreement 2011. The assertion that the Anti-Counterfeiting Trade Agreement 2011 does not require legislative measures is questionable ��� especially given the United States Trade Representative has called the agreement ���the highest-standard plurilateral agreement ever achieved concerning the enforcement of intellectual property rights.��� It is worthwhile reiterating that there has been much criticism of the secretive and partisan nature of the negotiations surrounding the Anti-Counterfeiting Trade Agreement 2011. Sean Flynn summarizes these concerns: "The negotiation process for ACTA has been a case study in establishing the conditions for effective industry capture of a lawmaking process. Instead of using the relatively transparent and inclusive multilateral processes, ACTA was launched through a closed and secretive ������club approach��� in which like-minded jurisdictions define enforcement ���membership��� rules and then invite other countries to join, presumably via other trade agreements.��� The most influential developing countries, including Brazil, India, China and Russia, were excluded. Likewise, a series of manoeuvres ensured that public knowledge about the specifics of the agreement and opportunities for input into the process were severely limited. Negotiations were held with mere hours notice to the public as to when and where they would be convened, often in countries half away around the world from where public interest groups are housed. Once there, all negotiation processes were closed to the public. Draft texts were not released before or after most negotiating rounds, and meetings with stakeholders took place only behind closed doors and off the record. A public release of draft text, in April 2010, was followed by no public or on-the-record meetings with negotiators." Moreover, it is disturbing that the Anti-Counterfeiting Trade Agreement 2011 has been driven by ideology and faith, rather than by any evidence-based policy making Professor Duncan Matthews has raised significant questions about the quality of empirical evidence used to support the proposal of Anti-Counterfeiting Trade Agreement 2011: ���There are concerns that statements about levels of counterfeiting and piracy are based either on customs seizures, with the actual quantities of infringing goods in free circulation in any particular market largely unknown, or on estimated losses derived from industry surveys.��� It is particularly disturbing that, in spite of past criticism, the Department of Foreign Affairs and Trade has supported the Anti-Counterfeiting Trade Agreement 2011, without engaging the Productivity Commission or the Treasury to do a proper economic analysis of the proposed treaty. Kader Arif, Rapporteur for the Anti-Counterfeiting Trade Agreement 2011 in the European Parliament, quit his position, and said of the process: "I want to denounce in the strongest possible manner the entire process that led to the signature of this agreement: no inclusion of civil society organisations, a lack of transparency from the start of the negotiations, repeated postponing of the signature of the text without an explanation being ever given, exclusion of the EU Parliament's demands that were expressed on several occasions in our assembly. As rapporteur of this text, I have faced never-before-seen manoeuvres from the right wing of this Parliament to impose a rushed calendar before public opinion could be alerted, thus depriving the Parliament of its right to expression and of the tools at its disposal to convey citizens' legitimate demands.��� Everyone knows the ACTA agreement is problematic, whether it is its impact on civil liberties, the way it makes Internet access providers liable, its consequences on generic drugs manufacturing, or how little protection it gives to our geographical indications. This agreement might have major consequences on citizens' lives, and still, everything is being done to prevent the European Parliament from having its say in this matter. That is why today, as I release this report for which I was in charge, I want to send a strong signal and alert the public opinion about this unacceptable situation. I will not take part in this masquerade." There have been parallel concerns about the process and substance of the Anti-Counterfeiting Trade Agreement 2011 in the context of Australia. I have a number of concerns about the substance of the Anti-Counterfeiting Trade Agreement 2011. First, I am concerned that the Anti-Counterfeiting Trade Agreement 2011 fails to provide appropriate safeguards in respect of human rights, consumer protection, competition, and privacy laws. It is recommended that the new Joint Parliamentary Committee on Human Rights investigate this treaty. Second, I argue that there is a lack of balance to the copyright measures in the Anti-Counterfeiting Trade Agreement 2011 ��� the definition of piracy is overbroad; the suite of civil remedies, criminal offences, and border measures is excessive; and there is a lack of suitable protection for copyright exceptions, limitations, and remedies. Third, I discuss trade mark law, intermediary liability, and counterfeiting. I express my concerns, in this context, that the Anti-Counterfeiting Trade Agreement 2011 could have an adverse impact upon consumer interests, competition policy, and innovation in the digital economy. I also note, with concern, the lobbying by tobacco industries for the Anti-Counterfeiting Trade Agreement 2011 ��� and the lack of any recognition in the treaty for the capacity of countries to take measures of tobacco control under the World Health Organization Framework Convention on Tobacco Control. Fourth, I note that the Anti-Counterfeiting Trade Agreement 2011 provides no positive obligations to promote access to essential medicines. It is particularly lamentable that Australia and the United States of America have failed to implement the Doha Declaration on the TRIPS Agreement and Public Health 2001 and the WTO General Council Decision 2003. Fifth, I express concerns about the border measures in the Anti-Counterfeiting Trade Agreement 2011. Such measures lack balance ��� and unduly favour the interests of intellectual property owners over consumers, importers, and exporters. Moreover, such measures will be costly, as they involve shifting the burden of intellectual property enforcement to customs and border authorities. Interdicting, seizing, and destroying goods may also raise significant trade issues. Finally, I express concern that the Anti-Counterfeiting Trade Agreement 2011 undermines the role of existing international organisations, such as the United Nations, the World Intellectual Property Organization and the World Trade Organization, and subverts international initiatives such as the WIPO Development Agenda 2007. I also question the raison d'��tre, independence, transparency, and accountability of the proposed new ���ACTA Committee���. In this context, I am concerned by the shift in the position of the Labor Party in its approach to international treaty-making in relation to intellectual property. The Australian Parliament adopted the Australia-United States Free Trade Agreement 2004, which included a large Chapter on intellectual property. The treaty was a ���TRIPs-Plus��� agreement, because the obligations were much more extensive and prescriptive than those required under the multilateral framework established by the TRIPS Agreement 1994. During the debate over the Australia-United States Free Trade Agreement 2004, the Labor Party expressed the view that it would seek to mitigate the effects of the TRIPS-Plus Agreement, when at such time it gained power. Far from seeking to ameliorate the effects of the Australia-United States Free Trade Agreement 2004, the Labor Government would seek to lock Australia into a TRIPS-Double Plus Agreement ��� the Anti-Counterfeiting Trade Agreement 2011. There has not been a clear political explanation for this change in approach to international intellectual property. For both reasons of process and substance, I conclude that the Australian Parliament and the Australian Government should reject the Anti-Counterfeiting Trade Agreement 2011. The Australian Government would do better to endorse the Washington Declaration on Intellectual Property and the Public Interest 2011, and implement its outstanding obligations in respect of access to knowledge, access to essential medicines, and the WIPO Development Agenda 2007. The case study of the Anti-Counterfeiting Trade Agreement 2011 highlights the need for further reforms to the process by which Australia engages in international treaty-making.

Atheroma: Is calcium important or not? A modelling study of stress within the atheromatous fibrous cap in relation to position and size of calcium deposits

Atheromatous plaque rupture h the cause of the majority of strokes and heart attacks in the developed world. The role of calcium deposits and their contribution to plaque vulnerability are controversial. Some studies have suggested that calcified plaque tends to be more stable whereas others have suggested the opposite. This study uses a finite element model to evaluate the effect of calcium deposits on the stress within the fibrous cap by varying their location and size. Plaque fibrous cap, lipid pool and calcification were modeled as hyperelastic, Isotropic, (nearly) incompressible materials with different properties for large deformation analysis by assigning time-dependent pressure loading on the lumen wall. The stress and strain contours were illustrated for each condition for comparison. Von Mises stress only increases up to 1.5% when varying the location of calcification in the lipid pool distant to the fibrous cap. Calcification in the fibrous cap leads to a 43% increase of Von Mises stress when compared with that in the lipid pool. An increase of 100% of calcification area leads to a 15% stress increase in the fibrous cap. Calcification in the lipid pool does not increase fibrous cap stress when it is distant to the fibrous cap, whilst large areas of calcification close to or in the fibrous cap may lead to a high stress concentration within the fibrous cap, which may cause plaque rupture. This study highlights the application of a computational model on a simulation of clinical problems, and it may provide insights into the mechanism of plaque rupture.

Nuorisokodista maailmalle : Kokemuksia nuorisokodissa el��misest�� ja aikuisi��ss�� selviytymisest��

This thesis studies the experiences of women who have lived in a youth home as girls. There are two main themes: 1) experiences of living in a youth home, and 2) experiences of coping as an adult. Data on the first theme is purely subjective; it derives from personal, recalled experiences. Data on the second theme is partly based on experiences and partly on facts about the current life situation of the research participants. A third theme of the thesis is concerned with the question of how the research participants��� placement in a youth home influenced their later life. The thesis contributes valuable knowledge concerning the experiences of young people who have been raised in substitute care, a topic that is rare in the literature. The empirical data of the study consists of responses to an initial inquiry and subsequent interviews. The inquiry was sent to 116 former inhabitants of a youth home. 62 altogether returned the inquiry, and 34 participated in the interview. The purpose of the inquiry was to produce an overview of the life situations of the research participants and to invite them to participate in the interview. In addition, the inquiry sought to produce an overview of how the participants enjoyed living in a youth home and how they saw its significance in terms of their later lives. The interviews concentrated on the research participants��� experiences concerning the processes of getting into a youth home, living there, and coping independently in life afterwards. The most central result relating to the first main theme was that the experiences were both shared and non-shared. Living in a youth home was characterized by six general sentiments: ���wonderful, real home���, ���new world!���, ���safe haven���, ���place to live���, ���penal institution���, and ���nightmare���. These sentiments seemed to be related first and foremost to whether one���s own, individual needs and expectations had been met in the youth home. The strongest and most common needs, as experienced, were the needs for safety, belongingness and respect. On the basis of the experiences, meeting these needs can be considered as the most important task of a youth home. The results relating to the second main theme of the study were examined in two different ways. Comparisons with the general female population (education, situation in working life and financial circumstances) showed that research participants had coped less well. Differences were also found to exist in family structures: nuclear families and single mother families were more unusual among research participants, and stepfamilies more common, than in the general population. More of the participants��� children than of the general population���s lived with somebody other than their parent. However, the experience of coping well was common among research participants, although the beginning of independent living had been generally experienced as difficult: feelings of loneliness, insecurity and restlessness were dominant. Later, a sense of life control developed and strengthened through joining with others (family, work, friends), through accepting one���s own life history and through creating one���s own model of living. As the most significant explanation of their coping, the research participants identified their own (innate) strength and will to cope. The majority of the research participants felt that the youth home had a positive influence on their later lives. Positive influences can be grouped in three ���levels���: I) getting out of the home, II) having good experiences and learning useful things, and III) the essential effect on one���s own way of thinking and living. The second level���s influence includes strengthened self-esteem, increased social understanding and new knowledge and skills. Some research participants did not think the youth home had any significance in terms of their later lives, and some thought it had negative significance.

Some mechanisms of excitation of a railway wheel

Railway wheel vibrations are caused by a number of mechanisms. Two of these are considered: (a) gravitational load reaction acting on different points of the wheel rim, as the wheel rolls on, and (b) random fluctuating forces generated at the contact patch by roughness on the mating surfaces of the wheel and rail. The wheel is idealized as a thin ring, and the analysis is limited to a single wheel rolling on a rail. It is shown that the first mechanism results in a stationary pattern of vibration, which would not radiate any sound. The acceleration caused by roughness-excited forces is much higher at higher frequencies, but is of the same order as that caused by load reaction at lower frequencies. The computed acceleration level (and hence the radiated SPL) caused by roughness is comparable with the observed values, and is seen to increase by about 10 dB for a doubling of the wagon speed. The driving point impedance of the periodic rail-sleeper system at the contact patch, which is used in the analysis, is derived in a companion paper.

Investigation of potential antibacterial action for postharvest copper treatments of cut Acacia holosericea

The mechanisms of action of Cu 2+ in improving the longevity of cut flowers and foliage have not been elucidated. Possible antimicrobial action of Cu 2+ against stem end and vase solution colonising bacteria was investigated using Cu 2+ treatments optimised for cut Acacia holosericea A. Cunn. ex G. Don foliage stems. These treatments were a 5h pulse with 2.2mM Cu 2+ or a 0.5mM Cu 2+ vase solution versus a deionised water (no Cu 2+) control. Bacterial growth over time was assessed by a standard plate count agar technique and with scanning electron microscopy. Cu 2+ treatments significantly extended the cut foliage vase life. However, they did not have sustained antibacterial activity against stem end or vase solution colonising bacteria. Also, regular recutting of 1-2cm from the stem ends did not substantially improve either cut stem water relations or longevity. The positive effects of Cu 2+ treatments were unaffected by the repeated stem end recutting. It was concluded that the primary mechanism of Cu 2+ was not antibacterial. Moreover, naturally growing vase solution and stem end microbial populations had relatively insignificant effects on cut A. holosericea vase life. Research into alternative mechanisms of Cu 2+ is required. �� 2012 Elsevier B.V.

Assessing the integrated sustainability of a public rental housing project from the perspective of complex eco-system

Public rental housing (PRH) projects are the mainstream of China's new affordable housing policies, and their integrated sustainability has a far-reaching effect on medium-low income families' well-being and social stability. However, there are few quantitative researches on the integrated sustainability of PRH projects. Our study tries to fill this gap through proposing an assessment model of the integrated sustainability for PRH projects. First, this paper defines what the sustainability of a PRH project is. Second, after constructing the sustainable system of a PRH project from the perspective of complex eco-system, the paper explores the internal operation mechanism and the coupling mechanism among the ecological, economic and social subsystems. Third, it identifies fourteen indices to represent the sustainability system of a PRH project, including six indices of ecological subsystem, five of economic subsystem and three of social subsystem. Fourth, it qualifies the weights of three subsystems and their internal representative indices. In addition, an assessment model is established through expert surveys and analytic network process (ANP). Finally, the paper carries out an empirical research on a PRH project in Nanjing city of China, followed by suggestions to enhance the integrated sustainability. The sustainability system and its evaluation model proposed in this paper are concise and easy to understand and can provide a theoretical foundation and a scientific basis for the evaluation and optimization of PRH projects.

Kertomuksia kirkon ty��ntekij��ksi kasvamisesta : Kirkon nuorisoty��t�� opiskelevien spiritualiteetin ja ammatillisen identiteetin muotoutuminen

The aim of the study was to analyse Church Youth Work Leader students different processes of developing their spirituality and professional identity. The study was carried out in connection with the church-orientated education at the Diaconia University of Applied Sciences (Diak). The method of the study was narrative analysis. The data consisted of stories written (N=46) and told (N=10) by students, that were collected over three years in two units of Diak. The data was analysed in two ways: first with categorical-content analysis, and then with holistic-content analysis and holistic-form reading in order to establish the comprehensive views of complete narratives. The theoretical starting-point was to regard spirituality widely, including religion and faith. In the first data analysis, this theory was focused so that spirituality was namely Christian spirituality including personal faith and worship, membership in the Christian community and persons values and ideas about the meaning of life. The results of the investigation were presented in five model narratives. The story of a social care worker represents the process of a student orientating to social work. In this story spirituality manifested as a part of social and personal identity but not as a part of professional identity. The vocation for helping people led the student to social care work. In the story of a counselor, students good connection to their home parish took a central role. They had good experiences working as young Christian volunteers, and during their studies this volunteer role became professional role. Spirituality was strongly joined to professional identity. The story of an educator represents a vocation for spiritual work and youth work in the church. In this story students also had good connections to their home parishes. Spirituality manifested as a part of personal, social and professional identity. In the story of a spiritual worker or preacher, each person s spiritual vocation was remarkable. Spirituality was extremely individual and it defined the personal, social and professional identity. Spiritual devotion caused a change in students orientation from the church to social services. The story of a searcher tells about a student who is still looking for her or his own profession. The focus of the story was on personal growth and considering one s values and the meaning of life. Spirituality was manifested in personal identity. The results indicate that the practical placements in the second academic year have an important effect on students professional orientation and professional identity. The connection to the local parish has also significant meaning for students spiritual formation and development into church professions.

System integration design in MEMS - A case study of micromachined load cell

One of the critical issues in large scale commercial exploitation of MEMS technology is its system integration. In MEMS, a system design approach requires integration of varied and disparate subsystems with one of a kind interface. The physical scales as well as the magnitude of signals of various subsystems vary widely. Known and proven integration techniques often lead to considerable loss in advantages the tiny MEMS sensors have to offer. Therefore, it becomes imperative to think of the entire system at the outset, at least in terms of the concept design. Such design entails various aspects of the system ranging from selection of material, transduction mechanism, structural configuration, interface electronics, and packaging. One way of handling this problem is the system-in-package approach that uses optimized technology for each function using the concurrent hybrid engineering approach. The main strength of this design approach is the fast time to prototype development. In the present work, we pursue this approach for a MEMS load cell to complete the process of system integration for high capacity load sensing. The system includes; a micromachined sensing gauge, interface electronics and a packaging module representing a system-in-package ready for end characterization. The various subsystems are presented in a modular stacked form using hybrid technologies. The micromachined sensing subsystem works on principles of piezo-resistive sensing and is fabricated using CMOS compatible processes. The structural configuration of the sensing layer is designed to reduce the offset, temperature drift, and residual stress effects of the piezo-resistive sensor. ANSYS simulations are carried out to study the effect of substrate coupling on sensor structure and its sensitivity. The load cell system has built-in electronics for signal conditioning, processing, and communication, taking into consideration the issues associated with resolution of minimum detectable signal. The packaged system represents a compact and low cost solution for high capacity load sensing in the category of compressive type load sensor.

Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites

In this experimental study, the dry sliding wear and two-body abrasive wear behaviour of graphite filled carbon fabric reinforced epoxy composites were investigated. Carbon fabric reinforced epoxy composite was used as a reference material. Sliding wear experiments were conducted using a pin-on-disc wear tester under dry contact condition. Mass loss was determined as a function of sliding velocity for loads of 25, 50, 75, and 100 N at a constant sliding distance of 6000 m. Two-body abrasive wear experiments were performed under multi-pass condition using silicon carbide (SiC) of 150 and 320 grit abrasive papers. The effects of abrading distance and different loads have been studied. Abrasive wear volume and specific wear rate as a function of applied normal load and abrading distance were also determined. The results show that in dry sliding wear situations, for increased load and sliding velocity, higher wear loss was recorded. The excellent wear characteristics were obtained with carbon-epoxy containing graphite as filler. Especially, 10 wt.% of graphite in carbon-epoxy gave a low wear rate. A graphite surface film formed on the counterface was confirmed to be effective in improving the wear characteristics of graphite filled carbon-epoxy composites. In case of two-body abrasive wear, the wear volume increases with increasing load/abrading distance. Experimental results showed the type of counterface (hardened steel disc and SiC paper) material greatly influences the wear behaviour of the composites. Wear mechanisms of the composites were investigated using scanning electron microscopy. Wear of carbon-epoxy composite was found to be mainly due to a microcracking and fiber fracture mechanisms. It was found that the microcracking mechanism had been caused by progressive surface damage. Further, it was also noticed that carbon-epoxy composite wear is reduced to a greater extent by addition of the graphite filler, in which wear was dominated by microplowing/microcutting mechanisms instead of microcracking.

HALLINNONTASOJEN V��LINEN DIALOGI JA ERITYISOPETUKSEN MUUTOS BYROKRAATTISENA INSTITUUTIONA : - Kymppikuntien loppuraportin ja Erityisopetuksen strategian sis��ll��nanalyyttinen vertailu

The rise of Special education numbers in Finland has caused a situation where Finland s ten largest LEA s so called kymppikunnat (ten communes) have expressed their growing concern of organizing the special education in the current institutional settings. The LEA s started the conversation of redefining special education system in 2004. Their aim was to target the governments attention to the problematics of special education. By the request of the Ministry of Education the LEA s prepared a final report concerning the central questions in the Finnish special education system. On the basis of the LEA s survey it became even clearer that the legislation, funding system and curriculum are tightly linked together. The following LEA s took part into the writing process Espoo, Helsinki, Jyv��skyl��, Kuopio, Lahti, Lappeenranta, Tampere, Turku and Vantaa. The report was hand over to the Ministry of Education at 18.8.2006. After the delivery the Ministry organized special education development group meetings 17 times in the year 2007. The result of the LEA s report and the development meetings was a new Special Education Strategy 2007. I am observing the dialogue between administrational levels in governmental institutions change process. The research is a content analysis where I compare the Erityist�� tukea tarvitsevan oppilaan opetuksen j��rjest��misen uudistaminen osana yhten��ist�� perusopetusta- kohti laatua ja joustavuutta (The renewal of the organization of teaching for student with special educational needs as part of unified education for all - towards quality and flexibility) document to Erityisopetuksen strategia (Special education strategy) document. My aim was to find out how much of their own interests have the LEA s been able to integrate into the official governmental documentation. The data has been organized and analyzed quantitatively with Macros created as additional parts in Microsoft Excel software. The document material has also been arranged manually on sentence based categorization into an Excel matrix. The results have been theoretically viewed from the special education reform dialogue perspective, and from the angle of the change process of a bureaucratic institution. My target has been to provide a new viewpoint to the change of special education system as a bureaucratic institution. The education system has traditionally been understood as a machine bureaucracy. By the review provided in my pro gradu analysis it seems however that the administrational system in special education is more of a postmodern network bureaucracy than machine bureaucracy. The system appears to be constructed by overlapping, crossing and complex networks where things are been decided. These kinds of networks are called "governance networks . It seems that the governmental administrational - and politic levels, the third sector actors and other society s operators are mixed in decision making.

Jauheiden erottuminen

Partikkelisysteemien segregaatio eli erottuminen on ilmi��, jossa tasalaatuisen jauheseoksen komponenteilla on taipumus erota toisistaan. Jauheen erottumistaipumus riippuu partikkelien ominaisuuksista, ymp��r��ivist�� olosuhteista ja partikkelien v��lisist�� vuorovaikutuksista. Segregaatiomekanismeja on esitetty kirjallisuudessa valtava m����r�� ja pienetkin erot partikkelien v��lisiss�� ominaisuuksissa ja vuorovaikutuksissa voivat johtaa t��ysin eri segregaatiomekanismeihin. Segregaatioilmi�� on l����keteollisuuden n��k��kulmasta hyvin keskeinen, eik�� sit�� tunneta viel�� riitt��v��n hyvin, jotta silt�� osattaisiin systemaattisesti v��ltty��. Nykyinen segregaatiotutkimus perustuu suurelta osin yrityksen ja erehdyksen kautta tapahtuvaan oppimiseen. Todellisen segregaatioilmi��n ymm��rt��miseen tarvittaisiin innovatiivisia tutkimusmenetelmi��. Kokeellisen osan tarkoituksena oli kehitt���� ja perustestata menetelm��, jolla voidaan tutkia erilaisten partikkelisysteemien erottumisk��ytt��ytymist��, ja k��ytt���� t��t�� menetelm���� farmaseuttisten rae- ja pellettiseosten segregaation tutkimiseen. Tavoitteena oli todistaa kehitetyn Babel-laitteen toimintaperiaatteen soveltuvuus partikkelisysteemien erottumisk��ytt��ytymisen tutkimiseen, mutta suoritetut kokeet olivat l��hinn�� menetelm��n ja laitteen testausta. Ongelmiksi muodostuivat Babel-laitteen asettamat rajoitukset, partikkelien s��hk��istyminen ja partikkelien v��liset vuorovaikutukset. K��ytetyt suoraviivaiset l��hestymistavat eiv��t riitt��neet segregaation aiheuttamiseen Babel-laitteella. Vertikaalisen ravistelun seurauksena syntynyt konvektiopy��rre esti segregaation syntymisen. Johtop����t��ksen�� voidaan sanoa, ett�� Babel-laite mittaa hyvin ja toistettavasti sek�� se kykenee erottamaan erikokoiset partikkelit ja erilaiset kokojakaumat toisistaan. Laitteen kehitt��mistavoitteena olisi saada segregaatio paremmin n��kyviin jauheseoksissa ravistelun seurauksena. T��ll��in voitaisiin tehd�� p����telmi�� jauheseoksen erottumistaipumuksesta ja systeemiss�� vallitsevista erottumismekanismeista. Laitteen ja menetelm��n jatkokehitt��minen voisi tuottaa hy��dyllist�� lis��tietoa, mik�� edesauttaisi segregaation ymm��rt��mist�� ilmi��n�� entist�� paremmin

On the fundamentals of coherence theory

In the thesis I study various quantum coherence phenomena and create some of the foundations for a systematic coherence theory. So far, the approach to quantum coherence in science has been purely phenomenological. In my thesis I try to answer the question what quantum coherence is and how it should be approached within the framework of physics, the metatheory of physics and the terminology related to them. It is worth noticing that quantum coherence is a conserved quantity that can be exactly defined. I propose a way to define quantum coherence mathematically from the density matrix of the system. Degenerate quantum gases, i.e., Bose condensates and ultracold Fermi systems, form a good laboratory to study coherence, since their entropy is small and coherence is large, and thus they possess strong coherence phenomena. Concerning coherence phenomena in degenerate quantum gases, I concentrate in my thesis mainly on collective association from atoms to molecules, Rabi oscillations and decoherence. It appears that collective association and oscillations do not depend on the spin-statistics of particles. Moreover, I study the logical features of decoherence in closed systems via a simple spin-model. I argue that decoherence is a valid concept also in systems with a possibility to experience recoherence, i.e., Poincar�� recurrences. Metatheoretically this is a remarkable result, since it justifies quantum cosmology: to study the whole universe (i.e., physical reality) purely quantum physically is meaningful and valid science, in which decoherence explains why the quantum physical universe appears to cosmologists and other scientists very classical-like. The study of the logical structure of closed systems also reveals that complex enough closed (physical) systems obey a principle that is similar to G��del's incompleteness theorem of logic. According to the theorem it is impossible to describe completely a closed system within the system, and the inside and outside descriptions of the system can be remarkably different. Via understanding this feature it may be possible to comprehend coarse-graining better and to define uniquely the mutual entanglement of quantum systems.

Interaction of flux tubes with sound waves

The Landau damping of sound waves in a plasma consisting of ensemble of magnetic flux tubes is discussed. It is shown that sound waves cannot be Landau damped in general but under certain restricted conditions on plasma parameters the possibility of absorption of these waves can exist. The possibility of radiative damping of the acoustic waves along the magnetic filaments is also discussed. It appears that the most plausible mechanism of damping of sound waves in a plasma consisting of magnetic filaments can be due to scattering of a sound wave by the filaments.

NK-and T-cell function in chronic myeloid leukemia patients treated with interferon-? monotherapy

Chronic myeloid leukemia (CML) is one of the most studied human malignancies. It is caused by an autonomously active tyrosine kinase BCR-ABL, which is a result from a translocation between chromosomes 9 and 22 in the hematopoietic stem cell. As an outcome, a Philadelphia (Ph) chromosome is formed. BCR-ABL causes disturbed cell proliferation among other things. Although targeted tyrosine kinase inhibitor therapy has been developed in the beginning of the millenium and the survival rate has increased significantly, it is still not known why some patients benefit more from the treatment than others. Furthermore, the therapy is not considered to be curative. Before the era of tyrosine kinase inhibitors, the first-line treatment for CML was interferon-? (IFN-?). However, only a small proportion of patients benefitted from the treatment. Of these patients, a few were able to discontinue the treatment without renewal of the disease. The mechanism of IFN-? is not completely understood, but it is believed that differences in the immune system can be one of the reasons why some patients have better therapy response. Kreutzman, Rohon et al. have recently discovered that patients who have been able to stop IFN-? treatment have an increased number of NK- and T-cells. They also have a unique clonal T-cell population and more cytotoxic CD8+ T-cells and less CD4+ T-cells. The aim of this master���s thesis was to study the function of T- and NK-cells in IFN-? treated patients. Although it was shown earlier that IFN-? treated patients have increased NK-cell count, the function of these cells was unknown. Therefore, we have now investigated the killing potential of patients��� NK-cells, their activation status and cell surface antigen expression. In addition, we have also studied the activation status of patients��� T-cells and their cytotoxic properties. We observed that NK-cells from patients treated with IFN-? are unable to kill leukemic cells (K562) than NK-cells from healthy controls. In addition, patients on IFN-? treatment have more active T-cells and their NK-cells have an undifferentiated immunoregulatory phenotype. Patients that have been able to stop the treatment have anergic T-and NK-cells. As a conclusion our results suggest that IFN-? therapy induces increased NK-cell count, NK-cell immunoregulatory functions and more active T-cells. After stopping IFN-? therapy, NK- and T-cells from CML patients restore anergy typical for CML.

Queued Cooperative Wireless Networks With Rateless Codes

Cooperative communication using rateless codes, in which the source transmits an infinite number of parity bits to the destination until the receipt of an acknowledgment, has recently attracted considerable interest. It provides a natural and efficient mechanism for accumulating mutual information from multiple transmitting relays. We develop an analysis of queued cooperative relay systems that combines the communication-theoretic transmission aspects of cooperative communication using rateless codes over Rayleigh fading channels with the queuing-theoretic aspects associated with buffering messages at the relays. Relay cooperation combined with queuing reduces the message transmission times and also helps distribute the traffic load in the network, which improves throughput significantly.