Chain extension in electrospun polystyrene fibres: a SANS study

Small angle neutron scattering techniques were used to quantify the size and shape of the chain conformation in electrospun fibres of atactic polystyrene prepared from solutions in methyl ethyl ketone. Aligned arrays of fibres were collected onto a rotating collector with tangential velocity varying between 0 ms-1 and approximately 15 ms-1. The measured radii of gyration of the polystyrene chains were found to be slightly higher than that expected for samples prepared from solutions in the concentrated regime. The ratio of the radius of gyration parallel and perpendicular to the chain axis was found to be approximately 1.05 in contrast to the substantial macroscopic shape transformation intrinsic to electrospinning. When the tangential velocity of the rotating collector was greater than the flight velocity of the fibres (ca. 4 ms-1), a further extension of the polymer chains was observed with a ratio of the radii of gyration increasing to 1.20 at the highest collector speeds. It is proposed that the heterogeneous processes involved, particularly solvent evaporation and the formation of a polymer skin during electrospinning play a significant role in determining the level of molecular anisotropy in the fibres.

Intra-ovarian roles of activins and inhibins

Granulosa cells are the main ovarian source of inhibins, activins and activin-binding protein (follistatin) while germ (oogonia, oocytes) and somatic (theca, granulosa, luteal) cells express activin receptors, signaling components and inhibin co-receptor (betaglycan). Activins are implicated in various intra-ovarian roles including germ cell survival and primordial follicle assembly; follicle growth from preantral to mid-antral stages; suppression of thecal androgen production; promotion of granulosa cell proliferation, FSHR and CYP19A1 expression; enhancement of oocyte developmental competence; retardation of follicle luteinization and/or atresia and involvement in luteolysis. Inhibins (primarily inhibin A) are produced in greatest amounts by preovulatory follicles (and corpus luteum in primates) and suppress FSH secretion through endocrine negative feedback. Together with follistatin, inhibins act locally to oppose auto-/paracrine activin (and BMP) signaling thus modulating many of the above processes. The balance between activin-inhibin shifts during follicle development with activin signalling prevailing at earlier stages but declining as inhibin and betaglycan expression rise.

Transaction based indices for the UK commercial real estate market: an exploration using IPD transaction data

The nature of private commercial real estate markets presents difficulties for monitoring market performance. Assets are heterogeneous and spatially dispersed, trading is infrequent and there is no central marketplace in which prices and cash flows of properties can be easily observed. Appraisal based indices represent one response to these issues. However, these have been criticised on a number of grounds: that they may understate volatility, lag turning points and be affected by client influence issues. Thus, this paper reports econometrically derived transaction based indices of the UK commercial real estate market using Investment Property Databank (IPD) data, comparing them with published appraisal based indices. The method is similar to that presented by Fisher, Geltner, and Pollakowski (2007) and used by Massachusett, Institute of Technology (MIT) on National Council of Real Estate Investment Fiduciaries (NCREIF) data, although it employs value rather than equal weighting. The results show stronger growth from the transaction based indices in the run up to the peak in the UK market in 2007. They also show that returns from these series are more volatile and less autocorrelated than their appraisal based counterparts, but, surprisingly, differences in turning points were not found. The conclusion then debates the applications and limitations these series have as measures of market performance.

Mutant prevention concentrations of ciprofloxacin and enrofloxacin for Salmonella enterica

Objectives: To determine the mutant prevention concentrations (MPCs) of ciprofloxacin and enrofloxacin against four strains of Salmonella enterica serovar Enteritidis and four strains of S. Typhimurium including one fully susceptible, one multiply resistant (MAR), one GyrA mutant and one GyrA/MAR mutant. Further, to examine mutants arising after exposure to sub-MPC concentrations of the antibiotics for susceptibility to ciprofloxacin and enrofloxacin, and cyclohexane tolerance. Methods: MICs were determined using the agar dilution method of the BSAC. The MPC was recorded as the lowest concentration of antibiotic to inhibit growth from an inoculum of 10(10) cfu. Results: The MPCs and resulting MPC/MIC ratios of enrofloxacin were generally two- to four-fold higher than for ciprofloxacin. At 24 h for both antibiotics, MPCs were lowest for the fully susceptible strains (0.25-0.5 mg/L), similar for the MAR (1-4 mg/L) and GyrA (2-4 mg/L) mutants and highest for the GyrA/MAR mutants (1-8 mg/L). MPC/MIC ratios at 24 h were 2-16 for all strains except those for the MAR strains without mutation in gyrA where the ratios were 8-64. Conclusions: The ability to eradicate Salmonella in vivo depends on many factors such as antibiotic susceptibility of the strain, dose and route of administration. It is suggested that these MPC values will be useful when considering dosing strategies. In view of the high MPC/MIC ratio, MAR strains with wild-type gyrA, although susceptible to ciprofloxacin (MICs 0.06-0.13 mg/L), may give rise to treatment failures.

Quantifying the importance of galactic cosmic rays in cloud microphysical processes

Galactic Cosmic Rays are one of the major sources of ion production in the troposphere and stratosphere. Recent studies have shown that ions form electrically charged clusters which may grow to become cloud droplets. Aerosol particles charge by the attachment of ions and electrons. The collision efficiency between a particle and a water droplet increases, if the particle is electrically charged, and thus aerosol-cloud interactions can be enhanced. Because these microphysical processes may change radiative properties of cloud and impact Earth's climate it is important to evaluate these processes' quantitative effects. Five different models developed independently have been coupled to investigate this. The first model estimates cloud height from dew point temperature and the temperature profile. The second model simulates the cloud droplet growth from aerosol particles using the cloud parcel concept. In the third model, the scavenging rate of the aerosol particles is calculated using the collision efficiency between charged particles and droplets. The fourth model calculates electric field and charge distribution on water droplets and aerosols within cloud. The fifth model simulates the global electric circuit (GEC), which computes the conductivity and ionic concentration in the atmosphere in altitude range 0–45 km. The first four models are initially coupled to calculate the height of cloud, boundary condition of cloud, followed by growth of droplets, charge distribution calculation on aerosols and cloud droplets and finally scavenging. These models are incorporated with the GEC model. The simulations are verified with experimental data of charged aerosol for various altitudes. Our calculations showed an effect of aerosol charging on the CCN concentration within the cloud, due to charging of aerosols increase the scavenging of particles in the size range 0.1 µm to 1 µm.

Brief communication: a proposed method for the assessment of pubertal stage in human skeletal remains using cervical vertebrae maturation.

The assessment of age-at-death in non-adult skeletal remains is under constant review. However, in many past societies an individual's physical maturation may have been more important in social terms than their exact age, particularly during the period of adolescence. In a recent article (Shapland and Lewis: Am J Phys Anthropol 151 (2013) 302–310) highlighted a set of dental and skeletal indicators that may be useful in mapping the progress of the pubertal growth spurt. This article presents a further skeletal indicator of adolescent development commonly used by modern clinicians: cervical vertebrae maturation (CVM). This method is applied to a collection of 594 adolescents from the medieval cemetery of St. Mary Spital, London. Analysis reveals a potential delay in ages of attainment of the later CVM stages compared with modern adolescents, presumably reflecting negative environmental conditions for growth and development. The data gathered on CVM is compared to other skeletal indicators of pubertal maturity and long bone growth from this site to ascertain the usefulness of this method on archaeological collections.

Shape-controlled continuous synthesis of metal nanostructures

A segmented flow-based microreactor is used for the continuous production of faceted nanocrystals. Flow segmentation is proposed as a versatile tool to manipulate the reduction kinetics and control the growth of faceted nanostructures; tuning the size and shape. Switching the gas from oxygen to carbon monoxide permits the adjustment in nanostructure growth from 1D (nanorods) to 2D (nanosheets). CO is a key factor in the formation of Pd nanosheets and Pt nanocubes; operating as a second phase, a reductant, and a capping agent. This combination confines the growth to specific structures. In addition, the segmented flow microfluidic reactor inherently has the ability to operate in a reproducible manner at elevated temperatures and pressures whilst confining potentially toxic reactants, such as CO, in nanoliter slugs. This continuous system successfully synthesised Pd nanorods with an aspect ratio of 6; thin palladium nanosheets with a thickness of 1.5 nm; and Pt nanocubes with a 5.6 nm edge length, all in a synthesis time as low as 150 s.

Solution behavior and surface properties of carboxymethylcellulose acetate butyrate

Solution behavior of carboxymethylcellulose acetate butyrate (CMCAB) in acetone and ethyl acetate has been investigated by small-angle X-ray scattering (SAXS) and capillary viscometry and correlated with the characteristics of CMCAB films. Viscosity and SAXS measurements showed that ethyl acetate is a better solvent than acetone for CMCAB. Thin films of CMCAB were deposited onto silicon wafers (Si/SiO(2)) by spin coating. AFM images revealed that CMCAB spin coated films from solutions prepared in ethyl acetate were homogeneous and flat. However, films obtained from solutions in acetone were very rough. Contact angle measurements with polar and apolar test liquids characterized CMCAB surfaces as hydrophobic and allowed estimating the surface energy of CMCAB. Sum frequency generation vibrational spectroscopy was used to understand the role played by solvents and to gain insight about molecular orientation at Si/SiO(2)/CMCAB interface.

Effect of solvent on the adsorption behavior and on the surface properties of Sterculia striata polysaccharide

Characterization of Sterculia striate polysaccharide (SSP) films adsorbed onto Si wafers from solutions prepared in ethyl methyl imidazolium acetate (EmimAc), water or NaOH 0.01 mol/L was systematically studied by means of ellipsometry, atomic force microscopy and contact angle measurements. SSP adsorbed from EmimAc onto Si wafer as homogeneous monolayers (similar to 0.5 nm thick), while from water or NaOH 0.01 mol/L SSP formed layers of similar to 4.0 nm and similar to 1.5 nm thick, respectively. Surface energy values found for SSP adsorbed from EmimAc or water were 68 +/- 2 mJ/m(2) and 65 +/- 2 mJ/m(2), respectively, whereas from NaOH it amounted to 57 +/- 3 mJ/m(2). The immobilization of lysozyme (LYS) onto SSP films was also investigated. The mean thickness of LYS (d(LYS)) immobilized onto SSP films adsorbed from each solvent tended to increase with the decrease of gamma(P)(S) and gamma(total)(S). However, the enzymatic activity of LYS molecules was higher when they were immobilized onto SSP films with higher gamma(P)(S) and gamma(total)(S) values. (C) 2010 Elsevier Ltd. All rights reserved.

Inflation persistence and flexible prices

The inability of rational expectation models with money supply rules to deliver inflation persistence following a transitory deviation of money growth from trend is due to the rapid adjustment of the price level to expected events. The observation of persistent inflation in macroeconomic data leads many economists to believe that prices adjust sluggishly and/or expectations must not be rational. Inflation persistence in U.S. data can be characterized by a vector autocorrelation function relating inflation and deviations of output from trend. In the vector autocorrelation function both inflation and output are highly persistent and there are significant positive dynamic cross-correlations relating inflation and output. This paper shows that a flexible-price general equilibrium business cycle model with money and a central bank using a Taylor rule can account for these patterns. There are no sticky prices and no liquidity effects. Agents decisions in a period are taken only after all shocks are observed. The monetary policy rule transforms output persistence into inflation persistence and creates positive cross-correlations between inflation and output.

Análise histométrica do desenvolvimento testicular de cutias (Dasyprocta aguti) criadas em cativeiros

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crescimento e nutrição mineral de capim-camalote

Rottboelia exaltata é considerada uma das 12 piores espécies daninhas que infestam a cultura da cana-de-açúcar, pois geralmente não permite o fechamento das entrelinhas da cana quando se encontra em densidades maiores que 10 plantas por m². Com o objetivo de estudar a produção de massa seca, a distribuição e o acúmulo de macronutrientes em plantas de capim-camalote, foi conduzido o presente trabalho em condições de casa de vegetação. As plantas foram cultivadas em vasos preenchidos com areia de rio lavada e peneirada, sendo irrigadas diariamente com solução nutritiva completa de Hoagland & Arnon a 50% da concentração original. A primeira avaliação foi realizada aos 21 dias após a emergência (DAE), e as seguintes, em intervalos de 14 dias. Foi determinada a biomassa seca das diferentes partes da planta. O material foi moído e analisado quanto aos teores de macronutrientes. Os resultados indicaram que a planta apresentou crescimento durante toda a fase experimental. O maior acúmulo ocorreu aos 133 DAE, quando a planta acumulou 87,18 gramas de massa seca. Aos 133 DAE, cerca de 34,60% da biomassa seca estava alocada nas raízes, 40,29% nos colmos + bainhas, 15,13% nas folhas e 8,35% nas inflorescências. O acúmulo total dos macronutrientes foi crescente ao longo do ciclo de desenvolvimento da planta. Até 77 DAE, uma planta de capim-camalote acumula 7,14 gramas de massa seca; 132,2 mg de K; 81,5 mg de N; 32,3 mg de Ca; 18,8 mg de P; 18,6 mg de Mg; e 10,1 mg de S.

Estimação de parâmetros genéticos para peso em diferentes idades para animais da raça Tabapuã

Foram estimados parâmetros genéticos para pesos do nascimento aos 570 dias de idade para 35.308 animais da raça Tabapuã, nascidos entre 1975 e 2000, pertencentes à ABCZ (Associação Brasileira de Criadores de Zebu) sob três modelos distintos. O modelo 1 incluiu o efeito genético aditivo direto como aleatório, além dos efeitos fixos de grupo de contemporâneos, definido pelas variáveis: proprietário, rebanho, criador, rebanho do criador, sexo, condição de criação, ano e mês de nascimento, ano e mês da pesagem, e os efeitos linear e quadrático de idade do bezerro e idade da vaca ao parto como covariáveis. O modelo 2 compreendeu, além dos efeitos supracitados, o efeito de ambiente permanente materno. O modelo 3 constou dos efeitos genético aditivo direto e materno e de ambiente permanente materno (aleatórios) e os mesmos incluídos no modelo 1 (fixos). de acordo com o teste de razão de verossimilhança, o modelo 3 foi o mais adequado para ajustar os efeitos estudados. As estimativas de herdabilidade direta foram baixas a moderadas (0,08 a 0,26), decrescendo do nascimento às idades subseqüentes, com picos aos 90 e aos 180 dias de idade. Aos 345 dias de idade, ocorreu novo aumento nas estimativas, com menor oscilação entre as estimativas subseqüentes até 570 dias de idade. As estimativas de herdabilidade materna foram baixas, sendo maiores no período da desmama.

Reproductive biology of Abolboda pulchella and A. poarchon (Xyridaceae: Poales)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uma caracterização de grafos imersíveis

Este trabalho é motivado pelo resultado de Berge, que é uma generalização do teorema de Tutte o qual expressamos na forma: Dado o grafo G de ordem |V(G)| eni(G) o número de arestas em um emparelhamento máximo, existe um conjunto X de vértices de G tal que |V(G)|+|X| - ômega(G\X) - 2n(G)=0, onde ômega(G\X) é o número de componentes de ordem ímpar de G\X. Tal expressão chamamos a equação de Tutte-Berge associada de G, e escrevemos simplesmente T(G; X)=0. Os grafos podem ser classificados a partir das soluções da equação de Tutte-Berge. Um grafo G é chamado imersível se, e somente se, T(G; X)=0 possui pelo menos um conjunto solução não vazio de vértices, e G é denominado não imersível se, e somente se, o conjunto vazio é a única solução de T(G; X)=0. O resultado principal deste artigo é a caracterização de grafos imersíveis pelos conjuntos antifatores completos, além disso, provamos que os grafos fatoráveis estão contidos na classe dos imersíveis.