Grain size and magnetic fabric analyses

The combined use of grain size and magnetic fabric analyses provides the ability to discriminate among depositional environments in deep-sea terrigenous sediments. We analyzed samples from three different depositional settings: turbidites, pelagic or hemipelagic interlayers, and sediment drifts. Results indicate that sediment samples from these different environments can be distinguished from each other on the basis of their median grain size, sorting, as well as the intensity and shape of magnetic fabric as determined from an examination of the anisotropy of magnetic susceptibility. We use these discriminators to interpret downcore samples from the Bermuda Rise sediment drift. We find that the finer grains of the Bermuda Rise (relative to the Blake Outer Ridge) do not result from lower depositional energy (current speed) and so may reflect a difference in the nature of sediment being delivered to the site (i.e., distance from source) between the two locations.

Grain shape and mineralogy of loess on New Zealands South Island

Infilled fissures are described from the interface between two loess deposits on Banks Peninsula, South Island, New Zealand. Both loesses differ from the other loesses by having a solifluction deposit at their base consisting of angular basalt fragments of the same angularity as fresh frost shattered basalt mixed with the loess. Typically, the fissures are narrow and up to 160 cm deep while the infilling of the overlying loess shows no obvious structure. They occur mainly at higher elevations on south (poleward) facing slopes, and the host loess forms a fragipan of high density. They are most readily explained as being seasonal frost fissures or more probably ice-wedge casts, which would have required either permafrost or deep seasonal frost for their formation. If permafrost had existed, this would imply a cooling of the mean annual temperatures by at least 16 to 18°C.

Grain size and XRD analysis on Site 162-983

The grain size of deep-sea sediments provides an apparently simple proxy for current speed. However, grain size-based proxies may be ambiguous when the size distribution reflects a combination of processes, with current sorting only one of them. In particular, such sediment mixing hinders reconstruction of deep circulation changes associated with ice-rafting events in the glacial North Atlantic because variable ice-rafted detritus (IRD) input may falsely suggest current speed changes. Inverse modeling has been suggested as a way to overcome this problem. However, this approach requires high-precision size measurements that register small changes in the size distribution. Here we show that such data can be obtained using electrosensing and laser diffraction techniques, despite issues previously raised on the low precision of electrosensing methods and potential grain shape effects on laser diffraction. Down-core size patterns obtained from a sediment core from the North Atlantic are similar for both techniques, reinforcing the conclusion that both techniques yield comparable results. However, IRD input leads to a coarsening that spuriously suggests faster current speed. We show that this IRD influence can be accounted for using inverse modeling as long as wide size spectra are taken into account. This yields current speed variations that are in agreement with other proxies. Our experiments thus show that for current speed reconstruction, the choice of instrument is subordinate to a proper recognition of the various processes that determine the size distribution and that by using inverse modeling meaningful current speed reconstructions can be obtained from mixed sediments.

Sediment grain size and carbon/carbonate at DSDO Leg 55 Holes

CaCO3 content was determined on board ship by the "Karbonat Bomb" technique (Müller and Gastner, 1971). In this simple procedure, a sample is powdered and treated with HCl in a closed cylinder. Any resulting CO2 pressure is proportional to the CaCO3 content of the sample. Application of the calibration factor to the manometer reading (x 100) yields per cent CaCO3. The error can be as low as 1 per cent for sediments high in CaCO3, and in general an accuracy of ±2 to 5 per cent can be obtained.

Grain size and diatom valves in sediment cores KS82-30 and KS82-31

Diatoms were studied quantitatively in six latest Quaternary (~70 kyr B.P. to Recent) piston cores from the westernmost Mediterranean, the Alboran Basin, and the Atlantic region immediately to the west of the Straits of Gibraltar. The Atlantic cores completely lack diatoms. In the Alboran Basin, diatoms are common from late Stage 3 (~27.5 kyr B.P.) to Termination lb (9 kyr B.P.) and in Recent core tops, but are absent in the other latest Quaternary intervals. Maximum accumulation of diatoms and highest abundance of species normally in sediments associated with increased productivity occurred during the latest Quaternary deglaciation, in the first phase of Termination I (~14.8 kyr B.P.). In the modern Alboran Basin, a region of high biological productivity occurs immediately east of the Gibraltar Straits. This high productivity results from upwelling associated with the interaction between the Atlantic inflow and the bottom topography near the Spanish coast. The upwelled nutrient-rich waters are then advected to the east and southeast by the surficial anticyclonic gyral circulation. Late Quaternary variations in diatom abundance are considered to reflect changes in this upwelling intensity with highest diatom abundances inferred to result from increased upwelling associated with an intensification of the anticyclonic gyral circulation. Highest inferred upwelling rates occurred during the first phase of latest Quaternary deglaciation. It is possible that an intensification of circulation within the Mediterranean Basin as a whole occurred from late Stage 3 to mid Termination I because widespread hiatus formation has been reported at this time in the Straits of Sicily due to an increase in the formation of intermediate waters. Diatoms were not preserved in other latest Quaternary intervals due to insufficient productivity to counterbalance their dissolution.

Grain counts and XRD mineralogy of turbidite sand and hemipelagic mud from ODP Leg 168 sites

Sequences of late Pliocene to Holocene sediment lap onto juvenile igneous crust within 20 km of the Juan de Fuca Ridge in northwestern Cascadia Basin, Pacific Ocean. The detrital modes of turbidite sands do not vary significantly within or among sites drilled during Leg 168 of the Ocean Drilling Program. Average values of total quartz, total feldspar, and unstable lithic fragments are Q = 35, F = 35, and L = 30. Average values of monocrystalline quartz, plagioclase, and K-feldspar are Qm = 46, P = 49, and K = 5, and the average detrital modes of polycrystalline quartz, volcanic-rock fragments, and sedimentary-rock plus metamorphic-rock fragments are Qp = 16, Lv = 43, and Lsm = 41. Likely source areas include the Olympic Peninsula and Vancouver Island; sediment transport was focused primarily through the Strait of Juan de Fuca, Juan de Fuca Channel, Vancouver Valley, and Nitinat Valley. Relative abundance of clay minerals (<2-µm-size fraction) fluctuate erratically with depth, stratigraphic age, and sediment type (mud vs. turbidite matrix). Mineral abundance in mud samples are 0%-35% smectite (mean = 8%), 18%-59% illite (mean = 40%), and 29%-78% chlorite + kaolinite (mean = 52%). We attribute the relatively low content of smectite to rapid mechanical weathering of polymictic source terrains, with little or no input of volcanic detritus from the Columbia River. The scatter in clay mineralogy probably was caused by converging of surface currents, turbidity currents, and near-bottom nepheloid clouds from several directions, as well as subtle changes in glacial vs. interglacial weathering products.

Grain-size and carbon/carbonate analyses at DSDP Site 61-462

Sand-silt-clay distribution was determined on 10-cm**3 sediment samples collected at the time the cores were split and described. The sediment classification used here is that of Shepard (1954), with the sand, silt, and clay boundaries based on the Wentworth (1922) scale. Thus, the sand, silt, and clay fractions are composed of particles whose diameters range from 2000 to 62.5 µm, 62.5 to 3.91 µm, and less than 3.91 µm, respectively. This classification is applied regardless of sediment type and origin; therefore, the sediment names used in this table may differ from those used elsewhere in this volume, e.g., a silt composed of nannofossils in this table may be called a nannofossil ooze in a site-summary chapter.

Grain size and chemical compositions of bottom sediments from the Amur Bay

Composition of clay minerals in the <0.001 mm size fraction from the uppermost layer of bottom sediments in the northern Amur Bay was determined by X-ray powder diffraction analysis, and enrichment of 33 elements in the <0.001 mm and <0.01 mm size fractions of surface sediments from a number of sites at the marginal filter of the Razdol'naya River were studied by ICP-MS. Fe, U, and chalcophile elements occur in the highest concentrations in sediments from all sampling sites within the filter. The bottom sediments are not enriched in trace, alkali, and alkaline earth elements. Maximum concentrations of chemical elements were found in deposits from the brackish part of the marginal filter, perhaps, because of formation of Fe and Mn (Al) hydroxides. Bottom sediments at the boundary between the brackish and marine parts of the filter contain the lowest concentrations of the examined elements.

Grain sizes and mineral composition of the basement of ODP Site 206-1256

Hole 1256C was cored 88.5 m into basement, and Hole 1256D, the deep reentry hole, was cored 502 m into basement during Ocean Drilling Program Leg 206. Hole 1256D is located ~30 m south of Hole 1256C (Wilson, Teagle, Acton, et al., 2003, doi:10.2973/odp.proc.ir.206.2003). A thick massive flow drilled in both holes, Units 1256C-18 and 1256D-1, consists of a single cooling unit of cryptocrystalline to fine-grained basalt, interpreted as a ponded lava, 32 m and at least 74.2 m thick, respectively. This ponded flow gives us a unique opportunity to examine textural variations from the glassy, folded crust of the lava pond recovered from the top of Unit 1256C-18 through the coarse-grained, thick massive lava body to the unusually recrystallized and deformed base cored in Unit 1256C-18. Some detailed descriptions of the textures and grain size variations through the lava pond (Units 1256C-18 and 1256D-1), with special reference to the recrystallization of the base of Unit 1256C-18, are presented here.

Consolidation properties, permeabilities, grain sizes and age of samples from ODP Holes 194-1194A and 194-1198A

Uniaxial strain consolidation experiments were conducted to determine elastic and plastic properties and to estimate the permeability of sediments from 0 to 200 meters below seafloor at Ocean Drilling Program Sites 1194 and 1198. Plastic deformation is described by compression indices, which range from 0.19 to 0.37. Expansion indices, the elastic deformation measured during unload/reload cycles on samples, vary from 0.02 to 0.029. Consolidation experiments provide lower bounds on permeability between 5.4 x 10**-16 m**2 and 1.9 x 10**-18 m**2, depending on the consolidation state of the sample.