Compact Planar Multiband Antenna for GPS, DCS, 2.4/5.8 GHz WLAN Applications

A compact single –feed multiband planar antenna configuration Suitable for GPS, DCS. 2.4/5.8 GHz WLAN applications are presented. The antenna has dimensions 38 x 3 x 1.6 mm and offers good radiation and reflection characteristics in the above frequency bands. The antenna has a simple geometry and can be easily fed using a 50 coaxial probe

Compact Planar Multiband Antenna for GPS,DCS 2.4/5.8 GHz WLAN Applications

A compact single - feed muttiband planar antenna configuration suitable for GPS, DCS. 2.4/5.8 GHz WLAN applications is presented. The antenna has dimensions 38 x 3 x 1.6 mm and offers good radiation and reflection characteristics in the above frequency bands. The antenna has a simple geometry and can be easily fed using a 50 coaxial probe.

Propagation of Microwaves in the Troposphere with Potential Application to GPS based Navigation and Meteorology with emphasis on Indian region

Global Positioning System (GPS), with its high integrity, continuous availability and reliability, revolutionized the navigation system based on radio ranging. With four or more GPS satellites in view, a GPS receiver can find its location anywhere over the globe with accuracy of few meters. High accuracy - within centimeters, or even millimeters is achievable by correcting the GPS signal with external augmentation system. The use of satellite for critical application like navigation has become a reality through the development of these augmentation systems (like W AAS, SDCM, and EGNOS, etc.) with a primary objective of providing essential integrity information needed for navigation service in their respective regions. Apart from these, many countries have initiated developing space-based regional augmentation systems like GAGAN and IRNSS of India, MSAS and QZSS of Japan, COMPASS of China, etc. In future, these regional systems will operate simultaneously and emerge as a Global Navigation Satellite System or GNSS to support a broad range of activities in the global navigation sector.Among different types of error sources in the GPS precise positioning, the propagation delay due to the atmospheric refraction is a limiting factor on the achievable accuracy using this system. The WADGPS, aimed for accurate positioning over a large area though broadcasts different errors involved in GPS ranging including ionosphere and troposphere errors, due to the large temporal and spatial variations in different atmospheric parameters especially in lower atmosphere (troposphere), the use of these broadcasted tropospheric corrections are not sufficiently accurate. This necessitated the estimation of tropospheric error based on realistic values of tropospheric refractivity. Presently available methodologies for the estimation of tropospheric delay are mostly based on the atmospheric data and GPS measurements from the mid-latitude regions, where the atmospheric conditions are significantly different from that over the tropics. No such attempts were made over the tropics. In a practical approach when the measured atmospheric parameters are not available analytical models evolved using data from mid-latitudes for this purpose alone can be used. The major drawback of these existing models is that it neglects the seasonal variation of the atmospheric parameters at stations near the equator. At tropics the model underestimates the delay in quite a few occasions. In this context, the present study is afirst and major step towards the development of models for tropospheric delay over the Indian region which is a prime requisite for future space based navigation program (GAGAN and IRNSS). Apart from the models based on the measured surface parameters, a region specific model which does not require any measured atmospheric parameter as input, but depends on latitude and day of the year was developed for the tropical region with emphasis on Indian sector.Large variability of atmospheric water vapor content in short spatial and/or temporal scales makes its measurement rather involved and expensive. A local network of GPS receivers is an effective tool for water vapor remote sensing over the land. This recently developed technique proves to be an effective tool for measuring PW. The potential of using GPS to estimate water vapor in the atmosphere at all-weather condition and with high temporal resolution is attempted. This will be useful for retrieving columnar water vapor from ground based GPS data. A good network of GPS could be a major source of water vapor information for Numerical Weather Prediction models and could act as surrogate to the data gap in microwave remote sensing for water vapor over land.

D-Ruta: excursionisme i GPS

Posem que tenim un cap de setmana excursionista. Ens llevem amb ànims de caminar i emmotxillar parents o amics cap a alguna banda. Posem, a més, que la banda és el santuari de Núria que hi volem fer una ruta

Wikiloc: software libre y APIs de Google Maps para visualizar y compartir rutas GPS

Wikiloc es un servicio web gratuito para visualizar y compartir rutas y puntos de interés GPS. Utilizando software libre y la API de Google Maps, Wikiloc hace la función de base de datos personal de localizaciones GPS. Desde cualquier acceso a Internet un usuario de GPS puede cargar sus datos GPS y al momento visualizar la ruta y waypoints con distinta cartografía de fondo, incluidos servidores de mapas externos WMS (Web Map Service) o descargarlo a Google Earth para ver en 3D. Paralelamente se muestra el perfil de altura, distancia, desniveles acumulados y las fotos o comentarios que el usuario quiera añadir

Disseny i implementació d'un dispositiu de localització GPS

L'objectiu final d'aquest projecte ha estat el de fer un localitzador GPS. Inicialment es parteix d'un mòdul LCD amb retroil•luminació Optrex DMF-5005N i un mòdul GPS Connexant TU30. De la unió d'aquests dos, més la circuiteria dissenyada, en sorgeix un sistema capaç de proporcionar dades fiables i útils per a l'usuari, com són les coordenades, la velocitat, l'alçada, la data i l'hora, entre d'altres. El resultat final del projecte està contingut en una carcassa al frontal de la qual, hi podem veure el panell LCD, un pulsador per canvi de pantalla i un altre per variar la velocitat de quilòmetres per hora a nusos i a la inversa

L'ús del GPS en activitats desenvolupades a la natura.

Resumen tomado de la publicación. Contiene mapas, imágenes ytablas explicativas de las opciones, características y funciones del GPS

Narinan : un ejemplo de matemáticas (utilidad del GPS) y transversalidad.

Resumen tomado de la publicación. Monográfico con el título: interdisciplinariedad y educación física

El GPS y su aplicación en la realización de rutas e itinerarios.

Este proyecto de innovación educativa se presentó en el Congreso Internacional de Innovación en la Educación celebrado en Valladolid los dias 26, 27 y 28 de abril de 2005

Desarrollo de un programa informático para potenciar las prácticas sobre GPS en la ayuda a la navegación terrestre.

Este proyecto ha sido desarrollado en el Departamento de Teoría de la Señal y Comunicaciones e Ingeniería Telemática de la Universidad de Valladolid, y han contribuido a su realización cuatro profesores del citado departamento. El objetivo principal de este proyecto ha sido desarrollar un programa informático que permita la navegación terrestre mediante el Sistema de Posicionamiento Global por Satélites (GPS). Concretamente, se ha aplicado para que permita la navegación terrestre en los alrededores de la Escuela Técnica Superior de Ingenieros de Telecomunicación de la Universidad de Valladold. Para ello, se ha desarrollado un programa software en el entorno de programación Visual C++ . Esta aplicación dispone de un interface gráfico para el tratamiento de los datos recogidos con una tarjeta receptora GPS Microtraker, que se utiliza para adquirir los datos emitidos por los satélites y calcular los diferentes parámetros dados por este sistema. La aplicación elaborada sirve para potenciar la eficacia de las prácticas y por ello se ha adaptado para incorporarla a las prácticas relativas al sistema GPS, que se llevan a cabo en la asignatura optativa de segundo ciclo : Sistemas de telecomunicación III que se imparte en la titulación de Ingeniería de la Telecomunicación. Como resultado del proyecto tenemos la aplicación informática desarrollada que permite la navegación terrestre mediante GPS y un manual de usuario para su utilización, que en la actualidad no está publicado.

El Marco Com??n : el GPS de la ense??anza de las lenguas

Se contribuye a la difusi??n del que se considera que debe ser el ???libro de cabecera??? de los ense??antes de lenguas, ya que varios a??os despu??s de su publicaci??n sigue teniendo la misma o mayor vigencia para cumplir sus dos objetivos principales: fomentar la reflexi??n sobre qu?? hacemos realmente cuando nos comunicamos unos con otros, cu??les de estas capacidades tenemos que aprender, c??mo establecemos nuestros objetivos y evaluamos nuestro progreso, c??mo se realiza el aprendizaje de una lengua y qu?? podemos hacer para aprender mejor; y 2) facilitar que los profesionales se comuniquen entre s?? y puedan informar a su alumnado sobre los objetivos y c??mo alcanzarlos.

Servei de retirada de vehicles de la via pública del terme municipal de València basat en localització GPS i comunicacions GPRS

L’objectiu d’aquest projecte és dotar a Servicleop d’un programari que li permeti millorar la gestió dels serveis de retirada de vehicles de la via pública, que actualment s’efectua a través del canal de veu. Això s’aconseguirà mitjançant l’ús de cartografia digital i localització GPS, que permetrà optimitzar l’assignació de retirades al saber quina grua es troba en millor disposició, i PDAs que es comunicaran amb un centre de control a través de GPRS des del qual s’assignaran aquest serveis. S’oferiran facilitats sempre que sigui possible en la introducció de dades, disminuint les probabilitats de cometre errors, i tot el procés quedarà enregistrat automàticament en base de dades per a poder generar estadístiques o informes. el projecte parteix d’un altre projecte intern de Knosos anomenat Micronav.Net Serveis, en el qual també he treballat molt activament i que ofereix una solució genèrica similar a la requerida per Servicleop, empresa a la que va destinada el sistema que es presenta en aquest projecte final de carrera

Ground deformation at Soufriere Hills Volcano, Montserrat during 1998-2000 measured by radar interferometry and GPS

We examine the motion of the ground surface on the Soufriere Hills Volcano, Montserrat between 1998 and 2000 using radar interferometry (InSAR). To minimise the effects of variable atmospheric water vapour on the InSAR measurements we use independently-derived measurements of the radar path delay from six continuous GPS receivers. The surfaces providing a measurable inter-ferometric signal are those on pyroclastic flow deposits, mainly emplaced in 1997. Three types of surface motion can be discriminated. Firstly, the surfaces of thick, valley-filling deposits subsided at rates of 150-120 mm/year in the year after emplacement to 50-30 mm/year two years later. This must be due to contraction and settling effects during cooling. The second type is the near-field motion localised within about one kilometre of the dome. Both subsidence and uplift events are seen and though the former could be due to surface gravitational effects, the latter may reflect shallow (< 1 km) pressurisation effects within the conduit/dome. Far-field motions of the surface away from the deeply buried valleys are interpreted as crustal strains. Because the flux of magma to the surface stopped from March 1998 to November 1999 and then resumed from November 1999 through 2000, we use InSAR data from these two periods to test the crustal strain behaviour of three models of magma supply: open, depleting and unbalanced. The InSAR observations of strain gradients of 75-80 mm/year/krn uplift during the period of quiescence on the western side of the volcano are consistent with an unbalanced model in which magma supply into a crustal magma chamber continues during quiescence, raising chamber pressure that is then released upon resumption of effusion. GPS motion vectors agree qualitatively with the InSAR displacements but are of smaller magnitude. The discrepancy may be due to inaccurate compensation for atmospheric delays in the InSAR data. (c) 2005 Elsevier B.V. All rights reserved.

How could construction supply chain benefit from RFID/GPS integration: a knowledge management perspective

Construction materials and equipment are essential building blocks of every construction project and may account for 50-60 per cent of the total cost of construction. The rate of their utilization, on the other hand, is the element that most directly relates to a project progress. A growing concern in the industry that inadequate efficiency hinders its success could thus be accommodated by turning construction into a logistic process. Although mostly limited, recent attempts and studies show that Radio Frequency IDentification (RFID) applications have significant potentials in construction. However, the aim of this research is to show that the technology itself should not only be used for automation and tracking to overcome the supply chain complexity but also as a tool to generate, record and exchange process-related knowledge among the supply chain stakeholders. This would enable all involved parties to identify and understand consequences of any forthcoming difficulties and react accordingly before they cause major disruptions in the construction process. In order to achieve this aim the study focuses on a number of methods. First of all it develops a generic understanding of how RFID technology has been used in logistic processes in industrial supply chain management. Secondly, it investigates recent applications of RFID as an information and communication technology support facility in construction logistics for the management of construction supply chain. Based on these the study develops an improved concept of a construction logistics architecture that explicitly relies on integrating RFID with the Global Positioning System (GPS). The developed conceptual model architecture shows that categorisation provided through RFID and traceability as a result of RFID/GPS integration could be used as a tool to identify, record and share potential problems and thus vastly improve knowledge management processes within the entire supply chain. The findings thus clearly show a need for future research in this area.