Technical criteria for the design of foundation slabs and perimetral wall in difficult terrain in south east Madrid, Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Evaluating social choice techniques into intelligent environments by agent based social simulation

The primary hypothesis stated by this paper is that the use of social choice theory in Ambient Intelligence systems can improve significantly users satisfaction when accessing shared resources. A research methodology based on agent based social simulations is employed to support this hypothesis and to evaluate these benefits. The result is a six-fold contribution summarized as follows. Firstly, several considerable differences between this application case and the most prominent social choice application, political elections, have been found and described. Secondly, given these differences, a number of metrics to evaluate different voting systems in this scope have been proposed and formalized. Thirdly, given the presented application and the metrics proposed, the performance of a number of well known electoral systems is compared. Fourthly, as a result of the performance study, a novel voting algorithm capable of obtaining the best balance between the metrics reviewed is introduced. Fifthly, to improve the social welfare in the experiments, the voting methods are combined with cluster analysis techniques. Finally, the article is complemented by a free and open-source tool, VoteSim, which ensures not only the reproducibility of the experimental results presented, but also allows the interested reader to adapt the case study presented to different environments.

Análisis, desarrollo y optimización de un sistema para el diseño de redes topográficas valorando el modelo digital del terreno

El presente trabajo tiene como objetivo general el análisis de las técnicas de diseño y optimización de redes topográficas, observadas mediante topografía convencional (no satelital) el desarrollo e implementación de un sistema informático capaz de ayudar a la definición de la geometría más fiable y precisa, en función de la orografía del terreno donde se tenga que ubicar. En primer lugar se realizará un estudio de la metodología del ajuste mediante mínimos cuadrados y la propagación de varianzas, para posteriormente analizar su dependencia de la geometría que adopte la red. Será imprescindible determinar la independencia de la matriz de redundancia (R) de las observaciones y su total dependencia de la geometría, así como la influencia de su diagonal principal (rii), números de redundancia, para garantizar la máxima fiabilidad interna de la misma. También se analizará el comportamiento de los números de redundancia (rii) en el diseño de una red topográfica, la variación de dichos valores en función de la geometría, analizando su independencia respecto de las observaciones así como los diferentes niveles de diseño en función de los parámetros y datos conocidos. Ha de señalarse que la optimización de la red, con arreglo a los criterios expuestos, está sujeta a los condicionantes que impone la necesidad de que los vértices sean accesibles, y además sean visibles entre sí, aquellos relacionados por observaciones, situaciones que dependen esencialmente del relieve del terreno y de los obstáculos naturales o artificiales que puedan existir. Esto implica la necesidad de incluir en el análisis y en el diseño, cuando menos de un modelo digital del terreno (MDT), aunque lo más útil sería la inclusión en el estudio del modelo digital de superficie (MDS), pero esta opción no siempre será posible. Aunque el tratamiento del diseño esté basado en un sistema bidimensional se estudiará la posibilidad de incorporar un modelo digital de superficie (MDS); esto permitirá a la hora de diseñar el emplazamiento de los vértices de la red la viabilidad de las observaciones en función de la orografía y los elementos, tanto naturales como artificiales, que sobre ella estén ubicados. Este sistema proporcionaría, en un principio, un diseño óptimo de una red constreñida, atendiendo a la fiabilidad interna y a la precisión final de sus vértices, teniendo en cuenta la orografía, lo que equivaldría a resolver un planteamiento de diseño en dos dimensiones y media1; siempre y cuando se dispusiera de un modelo digital de superficie o del terreno. Dado que la disponibilidad de obtener de manera libre el MDS de las zonas de interés del proyecto, hoy en día es costoso2, se planteará la posibilidad de conjuntar, para el estudio del diseño de la red, de un modelo digital del terreno. Las actividades a desarrollar en el trabajo de esta tesis se describen en esta memoria y se enmarcan dentro de la investigación para la que se plantean los siguientes objetivos globales: 1. Establecer un modelo matemático del proceso de observación de una red topográfica, atendiendo a todos los factores que intervienen en el mismo y a su influencia sobre las estimaciones de las incógnitas que se obtienen como resultado del ajuste de las observaciones. 2. Desarrollar un sistema que permita optimizar una red topográfica en sus resultados, aplicando técnicas de diseño y simulación sobre el modelo anterior. 3. Presentar una formulación explícita y rigurosa de los parámetros que valoran la fiabilidad de una red topográfica y de sus relaciones con el diseño de la misma. El logro de este objetivo se basa, además de en la búsqueda y revisión de las fuentes, en una intensa labor de unificación de notaciones y de construcción de pasos intermedios en los desarrollos matemáticos. 4. Elaborar una visión conjunta de la influencia del diseño de una red, en los seis siguientes factores (precisiones a posteriori, fiabilidad de las observaciones, naturaleza y viabilidad de las mismas, instrumental y metodología de estacionamiento) como criterios de optimización, con la finalidad de enmarcar el tema concreto que aquí se aborda. 5. Elaborar y programar los algoritmos necesarios para poder desarrollar una aplicación que sea capaz de contemplar las variables planteadas en el apartado anterior en el problema del diseño y simulación de redes topográficas, contemplando el modelo digital de superficie. Podrían considerarse como objetivos secundarios, los siguientes apartados: Desarrollar los algoritmos necesarios para interrelacionar el modelo digital del terreno con los propios del diseño. Implementar en la aplicación informática la posibilidad de variación, por parte del usuario, de los criterios de cobertura de los parámetros (distribución normal o t de Student), así como los grados de fiabilidad de los mismos ABSTRACT The overall purpose of this work is the analysis of the techniques of design and optimization for geodetic networks, measured with conventional survey methods (not satellite), the development and implementation of a computational system capable to help on the definition of the most liable and accurate geometry, depending on the land orography where the network has to be located. First of all, a study of the methodology by least squares adjustment and propagation of variances will be held; then, subsequently, analyze its dependency of the geometry that the network will take. It will be essential to determine the independency of redundancy matrix (R) from the observations and its absolute dependency from the network geometry, as well as the influence of the diagonal terms of the R matrix (rii), redundancy numbers, in order to ensure maximum re liability of the network. It will also be analyzed first the behavior of redundancy numbers (rii) in surveying network design, then the variation of these values depending on the geometry with the analysis of its independency from the observations, and finally the different design levels depending on parameters and known data. It should be stated that network optimization, according to exposed criteria, is subject to the accessibility of the network points. In addition, common visibility among network points, which of them are connected with observations, has to be considered. All these situations depends essentially on the terrain relief and the natural or artificial obstacles that should exist. Therefore, it is necessary to include, at least, a digital terrain model (DTM), and better a digital surface model (DSM), not always available. Although design treatment is based on a bidimensional system, the possibility of incorporating a digital surface model (DSM) will be studied; this will allow evaluating the observations feasibility based on the terrain and the elements, both natural and artificial, which are located on it, when selecting network point locations. This system would provide, at first, an optimal design of a constrained network, considering both the internal reliability and the accuracy of its points (including the relief). This approach would amount to solving a “two and a half dimensional”3 design, if a digital surface model is available. As the availability of free DSM4 of the areas of interest of the project today is expensive, the possibility of combining a digital terrain model will arise. The activities to be developed on this PhD thesis are described in this document and are part of the research for which the following overall objectives are posed: 1. To establish a mathematical model for the process of observation of a survey network, considering all the factors involved and its influence on the estimates of the unknowns that are obtained as a result of the observations adjustment. 2. To develop a system to optimize a survey network results, applying design and simulation techniques on the previous model. 3. To present an explicit and rigorous formulation of parameters which assess the reliability of a survey network and its relations with the design. The achievement of this objective is based, besides on the search and review of sources, in an intense work of unification of notation and construction of intermediate steps in the mathematical developments. 4. To develop an overview of the influence on the network design of six major factors (posterior accuracy, observations reliability, viability of observations, instruments and station methodology) as optimization criteria, in order to define the subject approached on this document. 5. To elaborate and program the algorithms needed to develop an application software capable of considering the variables proposed in the previous section, on the problem of design and simulation of surveying networks, considering the digital surface model. It could be considered as secondary objectives, the following paragraphs: To develop the necessary algorithms to interrelate the digital terrain model with the design ones. To implement in the software application the possibility of variation of the coverage criteria parameters (normal distribution or Student t test) and therefore its degree of reliability.

Tecnología y competitividad en la economía mundial. Factores e indicadores clave de actuación

Durante los últimos 30 años se han creado una gran cantidad de índices e indicadores para evaluar la práctica totalidad de los países bajo distintas premisas. La tesis parte de un análisis detallado de más de un centenar de estos índices diferenciados entre los enfocados al desarrollo y los enfocados a la competitividad económica (véase Módulo I anexo) y tras esto, dentro del estudio teórico nos hemos centrado en 35 indicadores relacionados con la tecnología (capítulo 3, apartado 3.3.). La justificación, el objetivo de la investigación y la estructura de la tesis se presenta en el capítulo 2. Respecto a la metodología, tal y como se plantea en la hipótesis (apartado 2.2.), se presentan los criterios de selección de seis grupos de países (EP, EPC, EC, ECI, EI y EM)1, que se van a evaluar. Posteriormente se plantea el Protocolo de Cálculo para el total de grupos seleccionados dentro de los periodos 2005-2006 y 2007-2008 y se realiza una profunda evaluación estadística como se plantea dentro de la coherencia estadística explicada en el apartado 3.4.4.5. (también se dispone de los cálculos dentro de los Módulos II, III, IV y V anexos). Tras la metodología establecemos la construcción de un índice sintético NRI(A) y, tras esto, estudiamos las relaciones así como la interpretación de los resultados (capítulo 4, apartado 4.1.). Una vez obtenidos los resultados realizamos la validación de los mismos para el periodo 2007-2015 (capítulo 4 - apartado 4.2. – y los Módulos VI y VII anexos). En el capítulo 5, evaluamos el nivel de preparación tecnológico y su relación con la competitividad para los seis grupos de países (véase desde los apartados 5.1.y 5.2.). Dentro de cada uno de los seis grupos de países, sabemos las variables que cualitativamente tienen que priorizarse para mejorar el nivel de preparación tecnológica de los mismos. Estas variables inicialmente son sesenta y ocho – año 2007-08 –, y al final de la implementación del método se reducen notablemente. Estas variables finales, llamadas Indicadores Clave de Actuación (ICA), se agrupan – vía análisis factorial – en Factores Clave de Actuación que nos simplifican lo planteado. Para cada grupo de países se realizan los conglomerados de acuerdo a sus valores dentro de las ICAs en busca de singularidades y se ha llevado a cabo un análisis minucioso en función de los Indicadores Clave de Actuación. La Tesis, plantea científicamente como podemos evaluar el nivel de preparación tecnológica y su relación con la competitividad, desde un índice sintético creado NRI(A), que contempla únicamente Indicadores Clave de Actuación (variables seleccionadas) a partir de las variables originales del Network Readiness Index (NRI(R)) . Por último se plantea dentro de las conclusiones, capítulo 6, diferentes líneas de investigación, desarrollando dos de ellas que se pueden encontrar en el Modulo VIII anexo. Por un lado presentamos una línea de investigación centrada en 29 economías africanas (EA) de las que disponemos información fidedigna y por otro lado una segunda línea en la que nos centramos en la evaluación de España respecto a sus naciones coetáneas. La principal voluntad de la presente tesis doctoral, es simplificar la evaluación del nivel de preparación tecnológica y la relación de esta con la competitividad a partir de la creación de un índice sintético propio NRI(A). ABSTRACT - During the last 30 years, many institutions have been evaluating and endless range of variables in practically all of the world´s economies. This Thesis is the product of a detail analysis of more than one hundred indicators / index, which we have divided into two parts: those focused on development and those focused on economic competitiveness (see module I annex). Secondly, in our theoretical research we have concentrated on those indicators, which are related to technology (chapters 3, section 3.3). The selection criteria of the six economic groups to be evaluated are included in our methodology, as mentioned in the hypothesis (see section 2.2.). Subsequently the calculation procedure is also presented for all of the groups selected between the periods 2005-2006 and 2007-2008. Next, we perform a statistical study, which is presented accordingly in the segment dealing with statistics, section 3.4.4.5. The calculations are provided in modules I, II, III, IV and V annex. After the methods segment of the Thesis, we develop our argument, in which we presented the explanation of the relations as well as the interpretation of the results. Also at the chapter 4 you can find the result validation from 2007 till 2015. Finally in chapters 6, we evaluate the conclusions for the six economic groups (see section 6.2.). The Thesis scientifically explains the way in which we evaluate economic competitiveness in 135 countries from a standpoint of strictly technological variables. Six groups of countries are evaluated, being divided by criteria, which homogenize the economies under review. We recognize that the variables of each economic group should be prioritized in order to better their competitiveness. Initially the group consisted of 68 variables, a number which was considerably reduced after the implementation of our methodology. Likewise, these final variables, dubbed “key performance indicators”, were grouped into factors (key performance factors), which greatly simplify the prioritization process. At the same time, conglomerates have been created for each economic group according to their value concerning the selected variables. A detailed country – by – country analysis of their positioning in each of the six groups was conducted for each of the mathematically selected key performance indicators. Finally, at the Conclusion we introduce new research lines and between them we focus on two research lines in which ones we are working with (see chapter 6). We basically try to apply the multivariable analysis method, the factorial analysis and the conglomerates to designed and implemented our method first in a geographically group of countries (Africa) and secondly to evaluate and develop the public policies for Spain for the development of its competitively, comparing Spain to his coetaneous countries in Europe (see Module VIII). The main objective of this Doctoral Thesis is to noticeably simplify the comparison of the Network Readiness Index and its relation with the economic competitiveness of the countries using a new synthetic index design by us.

AVALIAÇÃO CEFALOMÉTRICA DA ESTABILIDADE PÓS-EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

Este estudo avaliou a estabilidade das alterações dentárias e esqueléticas produzidas pela Expansão Rápida da Maxila Assistida Cirurgicamente (ERMAC), no sentido transversal e vertical. A amostra selecionada para este estudo retrospectivo foi composta de 60 telerradiografias em norma frontal, de 15 pacientes, sendo 6 do sexo masculino e 9 do sexo feminino, com média de idade de 23 anos e 3 meses. Utilizou-se o disjuntor tipo Hyrax e o procedimento cirúrgico foi caracterizado pela osteotomia sagital mediana da maxila e não abordagem da sutura pterigopalatina. O início da ativação ocorreu no terceiro dia pós-operatório, sendo que, os limites para a expansão foram determinados por critérios eminentemente clínicos. Todos os pacientes foram radiografados nas fases pré-expansão (T1), pós-expansão imediata (T2), 3 meses pós- expansão (com o próprio disjuntor como contenção) (T3) e 6 meses pós-expansão (com a placa de acrílico removível como contenção) (T4). Medidas lineares foram obtidas a partir dos traçados cefalométricos gerados por um programa computadorizado (Radiocef Studio 2) e analisadas estatisticamente pelo teste de variância (ANOVA) e Tukey ao nível de 5% de significância. Concluiu-se que a ERMAC produziu um aumento estatisticamente significante, da cavidade nasal, largura maxilar, distância intermolares superiores, de T1 para T2, e que se mantiveram em T3 e T4. A largura facial e as distâncias intermolares inferiores não apresentaram alterações após a ERMAC. Avaliando o comportamento vertical da face, notou-se um aumento da AFAI nos tempos T1 para T2 que, diminuiu após a contenção de 3 meses (T3) e permaneceu estável em T4, embora aumentada se comparada com T1.(AU)

AVALIAÇÃO CEFALOMÉTRICA DA ESTABILIDADE PÓS-EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

Este estudo avaliou a estabilidade das alterações dentárias e esqueléticas produzidas pela Expansão Rápida da Maxila Assistida Cirurgicamente (ERMAC), no sentido transversal e vertical. A amostra selecionada para este estudo retrospectivo foi composta de 60 telerradiografias em norma frontal, de 15 pacientes, sendo 6 do sexo masculino e 9 do sexo feminino, com média de idade de 23 anos e 3 meses. Utilizou-se o disjuntor tipo Hyrax e o procedimento cirúrgico foi caracterizado pela osteotomia sagital mediana da maxila e não abordagem da sutura pterigopalatina. O início da ativação ocorreu no terceiro dia pós-operatório, sendo que, os limites para a expansão foram determinados por critérios eminentemente clínicos. Todos os pacientes foram radiografados nas fases pré-expansão (T1), pós-expansão imediata (T2), 3 meses pós- expansão (com o próprio disjuntor como contenção) (T3) e 6 meses pós-expansão (com a placa de acrílico removível como contenção) (T4). Medidas lineares foram obtidas a partir dos traçados cefalométricos gerados por um programa computadorizado (Radiocef Studio 2) e analisadas estatisticamente pelo teste de variância (ANOVA) e Tukey ao nível de 5% de significância. Concluiu-se que a ERMAC produziu um aumento estatisticamente significante, da cavidade nasal, largura maxilar, distância intermolares superiores, de T1 para T2, e que se mantiveram em T3 e T4. A largura facial e as distâncias intermolares inferiores não apresentaram alterações após a ERMAC. Avaliando o comportamento vertical da face, notou-se um aumento da AFAI nos tempos T1 para T2 que, diminuiu após a contenção de 3 meses (T3) e permaneceu estável em T4, embora aumentada se comparada com T1.(AU)

Evaluating treatment protocols to prevent antibiotic resistance

The spread of bacteria resistant to antimicrobial agents calls for population-wide treatment strategies to delay or reverse the trend toward antibiotic resistance. Here we propose new criteria for the evaluation of the population-wide effects of treatment protocols for directly transmitted bacterial infections and discuss different usage patterns for single and multiple antibiotic therapy. A mathematical model suggests that the long-term benefit of single drug treatment from introduction of the antibiotic until a high frequency of resistance precludes its use is almost independent of the pattern of antibiotic use. When more than one antibiotic is employed, sequential use of different antibiotics in the population (“cycling”) is always inferior to treatment strategies where, at any given time, equal fractions of the population receive different antibiotics. However, treatment of all patients with a combination of antibiotics is in most cases the optimal treatment strategy.

Evaluating multiple alternative hypotheses for the origin of Bilateria: An analysis of 18S rRNA molecular evidence

Six alternative hypotheses for the phylogenetic origin of Bilateria are evaluated by using complete 18S rRNA gene sequences for 52 taxa. These data suggest that there is little support for three of these hypotheses. Bilateria is not likely to be the sister group of Radiata or Ctenophora, nor is it likely that Bilateria gave rise to Cnidaria or Ctenophora. Instead, these data reveal a close relationship between bilaterians, placozoans, and cnidarians. From this, several inferences can be drawn. Morphological features that previously have been identified as synapomorphies of Bilateria and Ctenophora, e.g., mesoderm, more likely evolved independently in each clade. The endomesodermal muscles of bilaterians may be homologous to the endodermal muscles of cnidarians, implying that the original bilaterian mesodermal muscles were myoepithelial. Placozoans should have a gastrulation stage during development. Of the three hypotheses that cannot be falsified with the 18S rRNA data, one is most strongly supported. This hypothesis states that Bilateria and Placozoa share a more recent common ancestor than either does to Cnidaria. If true, the simplicity of placozoan body architecture is secondarily derived from a more complex ancestor. This simplification may have occurred in association with a planula-type larva becoming reproductive before metamorphosis. If this simplification took place during the common history that placozoans share with bilaterians, then placozoan genes that contain a homeobox, such as Trox2, should be explored, for they may include the gene or genes most closely related to Hox genes of bilaterians.

Evaluating Taphonomic Bias in a Storm-Disturbed Carbonate Platform: Effects of Compositional and Environmental Factors in Lower Jurassic Brachiopod Accumulations (Eastern Subbetic Basin, Spain)

In order to evaluate taxonomic and environmental control on the preservation pattern of brachiopod accumulations, sedimentologic and taphonomic data have been integrated with those inferred from the structure of brachiopod accumulations from the easternmost Lower Jurassic Subbetic deposits in Spain. Two brachiopod communities (Praesphaeroidothyris and Securina communities) were distinguished showing a mainly free-lying way of life in soft-bottom habitats. Three taphofacies are discriminated based on proportion of disarticulation, fragmentation, packing, and shell filling. Taphofacies 1 is represented by thinly fragmented, dispersed brachiopod shells in wackestone beds. Taphofacies 2 is spatially restricted to small lenses where shells are poorly fragmented, rarely disarticulated, usually void filled, and highly packed. Taphofacies 3 is represented by mud or cement filled, loosely packed, articulated brachiopods forming large pocket-like structures. Temporal and spatial averaging were minimally involved in taphofacies 2 and 3. It is interpreted that patchy preservation implies preservation of primary original patchiness of brachiopod communities on the seafloor. The origin of shell-rich taphofacies (2 and 3) is related to rapid burial due to episodic storm activity, while shell-poor taphofacies 1 records background conditions. The nature and comparative diversity of these taphofacies underscores the importance of rapid burial for shell beds preservation. Differences in preservation between taphofacies 2 and 3 are mainly related to environmental criteria, most importantly storm energy and water depth. In contrast, the taxonomic-specific pattern of the communities is a subordinate element of control, controlling only minor within-taphofacies differences in preservation.

A combined analysis of two randomized controlled trials evaluating the effect of Mindfulness-Based Stress Reduction on self-reported emotional experience and physiological symptoms among Veterans with Posttraumatic Stress Disorder

Thesis (Master's)--University of Washington, 2016-06

OMERACT-OARSI Initiative: Osteoarthritis Research Society International set of responder criteria for osteoarthritis clinical trials revisited.

Background: The OARSI Standing Committee for Clinical Trials Response Criteria Initiative had developed two sets of responder criteria to present the results of changes after treatment in three symptomatic domains (pain, function, and patient's global assessment) as a single variable for clinical trials (1). For each domain, a response was defined by both a relative and an absolute change, with different cut-offs with regard to the drug, the route of administration and the OA localization. Objective: To propose a simplified set of responder criteria with a similar cut-off, whatever the drug, the route or the OA localization. Methods: Data driven approach: (1) Two databases were considered The 'elaboration' database with which the formal OARSI sets of responder criteria were elaborated and The 'revisit' database. (2) Six different scenarios were evaluated: The two formal OARSI sets of criteria Four proposed scenarios of simplified sets of criteria Data from clinical randomized blinded placebo controlled trials were used to evaluate the performances of the two formal scenarios with two different databases ('elaboration' versus 'revisit') and those of the four proposed simplified scenarios within the 'revisit' database. The placebo effect, active effect, treatment effect, and the required sample arm size to obtain the placebo effect and the active treatment effect observed were the performances evaluated for each of the six scenarios. Experts' opinion approach: Results were discussed among the participants of the OMERACT VI meeting, who voted to select the definite OMERACT-OARSI set of criteria (one of the six evaluated scenarios). Results: Data driven approach: Fourteen trials totaling 1886 CA patients and fifteen studies involving 8164 CA patients were evaluated in the 'elaboration' and the 'revisit' databases respectively. The variability of the performances observed in the 'revisit' database when using the different simplified scenarios was similar to that observed between the two databases ('elaboration' versus 'revisit') when using the formal scenarios. The treatment effect and the required sample arm size were similar for each set of criteria. Experts' opinion approach: According to the experts, these two previous performances were the most important of an optimal set of responder criteria. They chose the set of criteria considering both pain and function as evaluation domain and requiring an absolute change and a relative change from baseline to define a response, with similar cut-offs whatever the drug, the route of administration or the CA localization. Conclusion: This data driven and experts' opinion approach is the basis for proposing an optimal simplified set of responder criteria for CA clinical trials. Other studies, using other sets of CA patients, are required in order to further validate this proposed OMERACT - OARSI set of criteria. (C) 2004 OsteoArthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Understanding consumer evaluation criteria for repurchase in a performing arts context

The purpose of this paper is to examine consumers' experience of a performing arts service to identify the predictors of audience behaviour especially as related to positive repurchase intention. Experiential service settings such as the performing arts have been cited in recent research as service contexts that may challenge current theory that repurchase intention is driven by service quality and customer satisfaction. It is posited that consumer emotions and the hedonic nature of the consumption experience may complicate the evaluation process to repurchase intention in a setting such as the performing arts. Qualitative semi-structured indepth interviews were undertaken of twenty-six performing arts consumers using a pool of questions and prompts developed from a review of the extant literature. Transcribed field notes were examined for key words and phrases and data was divided into the main emergent themes related to each of the questions and also coded for confirmation and is-confirmation of the extant literature constructs and relationships. The dimensions of service experience,price, service quality, target goal-directed emotions and non-target appraisal emotions were identified as driving repurchase intention in a performing arts setting. Customer satisfaction in this setting appears to result from emotional factors rather than expectancy dis-confirmation. This research supports the notion that an experiential consumption experience such as the performing arts will challenge the current theory of the drivers of repurchase intention and suggests that a more thorough large scale examination of these dimensions in this service setting is warranted.

AVALIAÇÃO CEFALOMÉTRICA DA ESTABILIDADE PÓS-EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

Este estudo avaliou a estabilidade das alterações dentárias e esqueléticas produzidas pela Expansão Rápida da Maxila Assistida Cirurgicamente (ERMAC), no sentido transversal e vertical. A amostra selecionada para este estudo retrospectivo foi composta de 60 telerradiografias em norma frontal, de 15 pacientes, sendo 6 do sexo masculino e 9 do sexo feminino, com média de idade de 23 anos e 3 meses. Utilizou-se o disjuntor tipo Hyrax e o procedimento cirúrgico foi caracterizado pela osteotomia sagital mediana da maxila e não abordagem da sutura pterigopalatina. O início da ativação ocorreu no terceiro dia pós-operatório, sendo que, os limites para a expansão foram determinados por critérios eminentemente clínicos. Todos os pacientes foram radiografados nas fases pré-expansão (T1), pós-expansão imediata (T2), 3 meses pós- expansão (com o próprio disjuntor como contenção) (T3) e 6 meses pós-expansão (com a placa de acrílico removível como contenção) (T4). Medidas lineares foram obtidas a partir dos traçados cefalométricos gerados por um programa computadorizado (Radiocef Studio 2) e analisadas estatisticamente pelo teste de variância (ANOVA) e Tukey ao nível de 5% de significância. Concluiu-se que a ERMAC produziu um aumento estatisticamente significante, da cavidade nasal, largura maxilar, distância intermolares superiores, de T1 para T2, e que se mantiveram em T3 e T4. A largura facial e as distâncias intermolares inferiores não apresentaram alterações após a ERMAC. Avaliando o comportamento vertical da face, notou-se um aumento da AFAI nos tempos T1 para T2 que, diminuiu após a contenção de 3 meses (T3) e permaneceu estável em T4, embora aumentada se comparada com T1.(AU)

Multi-criteria decision making approaches for supplier evaluation and selection:a literature review

Supplier evaluation and selection problem has been studied extensively. Various decision making approaches have been proposed to tackle the problem. In contemporary supply chain management, the performance of potential suppliers is evaluated against multiple criteria rather than considering a single factor-cost. This paper reviews the literature of the multi-criteria decision making approaches for supplier evaluation and selection. Related articles appearing in the international journals from 2000 to 2008 are gathered and analyzed so that the following three questions can be answered: (i) Which approaches were prevalently applied? (ii) Which evaluating criteria were paid more attention to? (iii) Is there any inadequacy of the approaches? Based on the inadequacy, if any, some improvements and possible future work are recommended. This research not only provides evidence that the multi-criteria decision making approaches are better than the traditional cost-based approach, but also aids the researchers and decision makers in applying the approaches effectively.

Go/no-go criteria during grocery brand development

Past research into new product screening criteria have largely centered on industrial new products. This study investigates the criteria that managers use for screening and evaluating new grocery products or brands. Theory suggests that the branding, promotional, and trade needs of grocery brands mean that screening criteria for grocery product development will differ from those applied to industrial goods. Our methodology departs from earlier research in gathering information on the accept/reject criteria during new product development rather than examining the reasons for success and failure after launch. The results endorse many findings from the extant literature on new product development. However, we highlight a set of factors that new product managers regard as important to the go/no-go decision in new grocery product or brand development that differs significantly from previous studies. From a research perspective, our study findings make an important contribution to the field by developing measurement scales for addressing NPD in the grocery sector.