Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Biologia alimentar e morfohistologia do tubo digestório do mussum, synbranchus marmoratus, bloch (osteichthyes: synbranchidae) no açude Marechal Dutra Gargalheiras , localizado no semi-árido brasileiro

Food habits and morpho-histology of the digestive tract of marbled swamp eel, Synbranchus marmoratus (Block, 1917) were investigated. The fish samples were captured during August, 2007 to July, 2008 in the Marechal Dutra reservoir, Acari, Rio Grande do Norte. The rain fall data was obtained from EMPARN. The fish captured, were measured, weighed, dissected, eviscerated and individual stomach weights were registered. The stomach contents analyses were carried out based on volumetric method, points, frequency of occurrence and applying the Index of Relative Importance. The degrees of repletion of the stomachs were determined besides the Index of Repletion relating to feeding activity variations and frequency of ingestion during the rainy and dry seasons. The rainfall varied from 0 mm a 335 mm with a mean value of 71.62 mm. Highest rainfall of 335.5 mm was registered in March, 2008 and August to December was the dry period. During the dry period the study species presented high degrees of repletion of the stomachs, with a peak value in the month of September (mean = 4.54; ± SD = 0.56). The minimum mean value of = 3.99 ± SD = 0.25 was registered in the month of May during the rainy period. The stomach contents of S. marmoratus registered show that this fish prefers animals, 78.22% of crustaceans 2.85% of mollusks, 3.25% of fish, 1.4% of insects and 13.5% of semi-digested organic matter, thus characterizing the study species as a carnivore with a preference for crustaceans. The morpho-histological aspects of the digestive tract of S. marmoratus indicate that the mouth is terminal adapted to open widely, thin lips with taste buds, small villiform teeth forming a single series on maxillas, four pairs of branchial arches with short and widely spaced branchial rays. The oesophagus is short and cylindrical with a small diameter. The oesophagus wall is thick with mucas surface and internal parallel folds. The stomach is retilinical in form, presenting cardiac, caecal and pyloric portions. The caecal portion is long and is intermediary in position between the cardiac and pyloric portions. The cardiac portion of the stomach is short and cylindrical formed of simple epithelial cylindrical mucus cells. The caecal portion is long with narrow walls, a big cavity and smaller folds which give rise to gastric glands. The phyloric portion has no glands and primary or secondary mucas folds. The morphohistological aspects of the digestive tract of S. marmoratus indicate its adaptation to a carnivorous feeding habit

Diferentes diâmetros de gotas e equipamentos para aplicação de inseticida no controle de Pseudoplusia includens

It was aimed to evaluate the spectrum and uniformity of droplets in function of sprayers, spraying volumes and rates of chemical insecticide on the mortality of Pseudoplusia includens in laboratory. The work was carried out at UNESP, Jaboticabal, SP, Brazil. The following treatments were applied over the caterpillars: two equipments (atomizer and hydraulic nozzle); two spray volumes (17 and 50 L ha(-1) for the atomizer and 50 and 100 L ha(-1) for the hydraulic nozzle); and two dosages of the insecticide endosulfan (0.5 and 1.0 L pc ha(-1)), in fully randomized plots, in a factorial scheme 2x2x2 and 1 untreated check. The caterpillars mortality was evaluated until the 6(th) day after the application of treatments. The spectrum of the droplets was evaluated in a particle size analyzer in real time determining the diameter and spectrum of droplets sprayed through the laser beam of the analyser. It was verified that the spray volume can be reduced by 17 L ha(-1) without losses on the P. includens control. The doses of 0.5 L pc ha(-1) (recommended for Anticarsia gemmatalis) did not satisfactorily control the caterpillar soybean looper. The atomizer produces droplets of higher uniformity (SPAN: 0.52) and lower percentage of droplets susceptible to drift (3.3%) compared to hydraulic nozzle (SPAN: 1.34 e % droplets <= 100 mu m: 15.2).

Dispersão de Orthezia praelonga Douglas, 1891 (Hemiptera: Ortheziidae) causada por equipamentos de pulverização em pomar de citros

A cochonilha O. praelonga é considerada uma importante praga dos citros no Brasil, e informações sobre a sua dispersão estão baseadas apenas em observações empíricas. Objetivou-se avaliar o efeito de equipamentos de pulverização comumente utilizados pelos citricultores na dispersão da praga. Armadilhas adesivas foram instaladas no solo e em vergalhões dispostos verticalmente às plantas de três linhas adjacentes em um talhão de citros contendo plantas infestadas pela praga. Foram adotados equipamentos utilizados para controle de pragas dos citros. A avaliação da dispersão foi realizada por meio da contagem de fêmeas, ninfas ou partes dos insetos aderidas às armadilhas adesivas. Os equipamentos Martignani e Bié foram capazes de lançar a praga a até 15 m, enquanto, para o equipamento Turbo Valência, detectaram-se fragmentos cerosos a até 22 m da máquina. Os equipamentos dotados de pistola não causaram qualquer dispersão da praga. Portanto, evidenciou-se que mesmo a utilização de equipamentos para controle de outras pragas pode favorecer a dispersão da cochonilha O. praelonga em pomares de citros, e isso deve ser considerado no aprimoramento do programa de manejo integrado de pragas dos citros.

Avaliação de equipamentos de aplicação de herbicidas em operação de repasse em cana-de-açúcar e segurança para o trabalhador

Objetivou-se com este trabalho classificar em seguras ou inseguras as condições de trabalho de aplicação da formulação comercial de paraquat a 0,5% e de abastecimento dos tanques em operação de repasse em cultura de cana-de-açúcar com os pulverizadores costal manual, costal pressurizado e Pulmipur manual; determinar o efeito das variações na operação de repasse em quatro usinas de açúcar e álcool com o pulverizador costal pressurizado sobre as exposições dos trabalhadores ao paraquat; determinar a eficácia de equipamentos de proteção individual nessas condições de trabalho; e avaliar a intensidade da deriva e a eficácia de acessórios protetores de deriva. As exposições dérmicas e respiratórias dos trabalhadores foram avaliadas e utilizadas para calcular a margem de segurança (MS). Os valores de MS foram utilizados para classificar essas condições de trabalho em seguras (MS > 1) ou em inseguras (MS < 1). Para avaliar a deriva das aplicações na cultura e a eficácia dos protetores de deriva, foram estudados os tratamentos: formulação comercial de paraquat a 0,5% na calda, aplicada com o costal manual, sem e com o chapéu de proteção de deriva; com o costal pressurizado, sem e com a planilha de proteção de deriva; formulação comercial de paraquat pura com o Pulmipur; formulação comercial de glyphosate a 1% com o costal pressurizado e com a planilha, e puro com o Pulmipur; e testemunha sem aplicação. As duas atividades com o Pulmipur proporcionam as maiores exposições dérmicas, devido ao manuseio da formulação, e são inseguras sem o uso dos EPIs e seguras com estes. As atividades com o pulverizador costal manual ou pressurizado são seguras com ou sem os EPIs. As grandes diferenças nas EDs dos trabalhadores se devem às diferenças no tempo de trabalho diário e no número de trabalhadores nas equipes entre as usinas de açúcar e álcool. O protetor de deriva tipo chapéu é eficaz no controle da deriva na aplicação do paraquat, e a planilha, não.

Implante de tubo de silicone com e sem colágeno na regeneração de nervos em eqüinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Emprego da microscopia eletrônica na avaliação pós-vacinal de epitélio traqueal de patos (Anas platyrhynchos) imunizados contra a doença de Newcastle

Avaliou-se o emprego da microscopia eletrônica de varredura no estudo da reação respiratória pós-vacinal em epitélio traqueal de patos (Anas platyrhynchos) imunizados contra a doença de Newcastle. Foram utilizadas 48 aves, distribuídas em quatro grupos: T1 - grupo de aves-controle (não vacinadas), T2 - grupo de aves vacinadas com a estirpe Ulster 2C, T3 - grupo de aves vacinadas com a estirpe B1 e T4 - grupo de aves vacinadas com a estirpe LaSota. Independente do grupo experimental, as aves não apresentaram sinais clínicos detectáveis de reação respiratória pós-vacinal. Ao microscópio eletrônico de varredura, observou-se que os animais vacinados com as estirpes B1 e LaSota desenvolveram descamação epitelial da traqueia, enquanto os vacinados com a estirpe Ulster 2C não, mostrando um epitélio traqueal íntegro, semelhante ao do grupo-controle. Os patos vacinados com a estirpe B1 mostraram evidências de regeneração epitelial da traqueia decorridos 21 dias pós-vacinação, o que não ocorreu com os vacinados com a amostra LaSota.

Modelagem de dados de falhas de equipamentos de sub-superfície em poços de petróleo da Bacia Potiguar

This master´s thesis presents a reliability study conducted among onshore oil fields in the Potiguar Basin (RN/CE) of Petrobras company, Brazil. The main study objective was to build a regression model to predict the risk of failures that impede production wells to function properly using the information of explanatory variables related to wells such as the elevation method, the amount of water produced in the well (BSW), the ratio gas-oil (RGO), the depth of the production bomb, the operational unit of the oil field, among others. The study was based on a retrospective sample of 603 oil columns from all that were functioning between 2000 and 2006. Statistical hypothesis tests under a Weibull regression model fitted to the failure data allowed the selection of some significant predictors in the set considered to explain the first failure time in the wells

Fatores de sucesso no desenvolvimento de novos produtos em pequenas empresas: um estudo de caso em um fabricante de equipamentos para gás natural veicular

This study presents itself as a contribution to the solidification of the Natural Gas industry, within the scope of the development of new products. The goal of this paper is to analyze the factors that lead to the success of new products through the evaluation of the activities done during the process of development of these products in the Natural Gas sector. To achieve this goal a case study was done in a small company of this segment. At first, as a basis for the study, a bibliographical research was done with books, theses, dissertations, monographies, publications in national and international periodicals, congress annals and publications in the internet related to the subject. Afterwards, a case study was done, aiming at the acquisition of further knowledge about the real process of development of products in a small company of the Natural Gas sector, allowing for the performance of the evaluation. The case study was done at Gas Project and Systems do Brasil, a company that works with the development of electronic equipment to the conversion of car engines to natural gas, through direct observations and interviews with the person responsible for the development and management of products. Through the evaluation of the process it was observed that the activities related to it are done in an informal way and some activities are considered unnecessary for their success. The results also suggest an emphasis in the technological activities, something that was not observed in the activities related to the market. The instruments used in this evaluation prove to be efficient to evaluate the process of development of new products in other companies, including those of different areas. Taking into account the relevance of the studied theme to the strengthening of the Natural Gas industry, it is necessary to do further complementary studies

Desenvolvimento de equipamentos para o mapeamento de áreas infestadas por macrófitas aquáticas imersas

Foi desenvolvido um conjunto de equipamentos com o objetivo de mapear as áreas infestadas por macrófitas aquáticas, auxiliando operações de manejo mecânico, as quais são realizadas por uma colhedora desenvolvida especificamente para essa finalidade. O conjunto de equipamentos foi constituído por um GPS com programa de correção diferencial, acoplado a um palmtop, um sistema com dois teclados ligados em dataloggers e um transdutor de deslocamento linear LT. O GPS, através do palmtop, proporcionava o mapeamento da área de deslocamento, auxiliando o operador na movimentação da máquina, otimizando a operação e evitando, dessa forma, a sobreposição das faixas de coleta na área a ser manejada. Um dos teclados monitorava a movimentação e operação da colhedora, além da presença de obstáculos, como tocos e bancos de areia, enquanto o outro gerava dados sobre a presença de determinada espécie de planta, como E. densa, E. najas e C. demersum, além do nível de infestação destas plantas. O transdutor, instalado na plataforma frontal da colhedora, se movimentava linearmente, gerando informações sobre a profundidade da coleta realizada. Dessa forma, pôde-se observar que o desenvolvimento desse conjunto de equipamentos foi de grande utilidade e auxiliou a operação de controle mecânico de áreas infestadas por macrófitas aquáticas imersas, possibilitando, assim, o planejamento de operações de manejo e controle subseqüentes.

Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Viabilidade de utilização de um compósito de matriz cerâmica com cargas recicláveis na fabricação de equipamentos solares

Composite materials can be defined as materials formed from two or more constituents with different compositions, structures and properties, which are separated by an interface. The main objective in producing composites is to combine different materials to produce a single device with superior properties to the component unit. The present study used a composite consisting of plaster, cement, EPS, tire, PET and water to build prototype solar attempt to reduce the manufacturing cost of such equipment. It was built two box type solar cookers, a cooler to be cooled by solar energy, a solar dryer and a solar cooker concentration. For these prototypes were discussed the processes of construction and assembly, determination of thermal and mechanical properties, and raising the performance of such solar systems. Were also determined the proportions of the constituents of the composite materials according to specific performance of each prototype designed. This compound proved to be feasible for the manufacture of such equipment, low cost and easy manufacturing and assembly processes

A vária máscara de Joana : melancolia em perto do coração selvagem

Entitled Joana s several mask: the melancholy in Perto do coração selvagem, the work is divided in six parts: the first one consists of the elaboration of a theoretical sketch about the melancholy that it offers the presuppositions that orientate the work, it is a short introduction about the study of the melancholy, a report until our time, the against-depressive ones and the arrival of the melancholy in Brazil and their particularities; the second part raises the theme of the melancholy, deepening its conception until what is called creative melancholy spread by Walter Benjamin, it serves as anchor for Clarice s writing and as a potential force for the processes lived by the characters of this writer; the third part examines Clarice Lispector s method emphasizing important points of production related to the theme of the melancholy, her style is the psychological analysis; the last one parts (fourth, fifth and sixth parts) are divided in topics that illustrate the conflicts, in most of the time contradictory, of the protagonist Joana, as well as, her difficult interaction with the things and the people that surround her. The fragmentary writing, the being's essential searches, the proximity with the death, the multiplicity of voices of feminine, De profundis, surrealist images, the incessant search for the thing , trips, epiphany, the flaw in the language, the taste of the badly, everything starting from melancholy - transformation and creation tool. The work about melancholy (Freud, Benjamin, Kristeva), it s place of ambiguous and contradictory movements. It is a trip that leads to several corporal and psychological sensations of Joana, enigma-scenes to be deciphered and conflicting images that make you wake up for a critical vision of the modern society. Since the beginning, something pulses without stopping, an incessant memory and the search for something that is lost. We are before recyclings of the interior/exterior, pain/pleasure, visions, abyss, ecstasy in the future and an exit through the melancholic light

Extensões ao Projeto LVWNet: mobilidade, interação com equipamentos reais, comunicação direta, e registro dinâmico de nós

Due to the constantly increasing use of wireless networks in domestic, business and industrial environments, new challenges have emerged. The prototyping of new protocols in these environments is typically restricted to simulation environments, where there is the need of double implementation, one in the simulation environment where an initial proof of concept is performed and the other one in a real environment. Also, if real environments are used, it is not trivial to create a testbed for high density wireless networks given the need to use various real equipment as well as attenuators and power reducers to try to reduce the physical space required to create these laboratories. In this context, LVWNet (Linux Virtual Wireless Network) project was originally designed to create completely virtual testbeds for IEEE 802.11 networks on the Linux operating system. This paper aims to extend the current project LVWNet, adding to it the features like the ability to interact with real wireless hardware, provides a initial mobility ability using the positioning of the nodes in a space coordinates environment based on meters, with loss calculations due to attenuation in free space, enables some scalability increase by creating an own protocol that allows the communication between nodes without an intermediate host and dynamic registration of nodes, allowing new nodes to be inserted into in already in operation network

Controle de qualidade e dosimetria em equipamentos de tomografia computadorizada

OBJETIVO: Avaliação de condições dos equipamentos e dosimetria em setores de tomografia computadorizada utilizando protocolos de cabeça, abdome e coluna lombar em pacientes adultos (em três equipamentos distintos) e pediátricos com até um ano e meio de vida (em um dos equipamentos avaliados). MATERIAIS E MÉTODOS: Foram estimados o índice de dose em tomografia computadorizada e a dose média em cortes múltiplos, em exames com pacientes adultos, em três distintos equipamentos. Ainda foram estimadas as doses na superfície de entrada e as doses absorvidas em exame de cabeça para pacientes adultos e pediátricos em um dos equipamentos avaliados. RESULTADOS: Foram realizados testes de controle de qualidade, mecânicos, demonstrando que os equipamentos satisfazem as especificações de uso estabelecidas pelas normas vigentes. Os resultados da dosimetria mostraram que valores de dose média em cortes múltiplos excederam em até 109,0% os valores de níveis de referência, apresentando consideráveis variações entre os equipamentos avaliados neste estudo. As doses absorvidas obtidas com protocolos pediátricos são inferiores aos de pacientes adultos, apresentando redução de até 51,0% na tireoide. CONCLUSÃO: Neste estudo foram avaliadas as condições de operação de três equipamentos tomográficos, estabelecendo quais parâmetros devem ser trabalhados para a implantação de um programa de controle de qualidade nas instituições onde esta pesquisa foi desenvolvida.