Wind Turbine Direct-Drive Permanent-Magnet Generator with Direct Liquid Cooling for Mass Reduction

Today’s electrical machine technology allows increasing the wind turbine output power by an order of magnitude from the technology that existed only ten years ago. However, it is sometimes argued that high-power direct-drive wind turbine generators will prove to be of limited practical importance because of their relatively large size and weight. The limited space for the generator in a wind turbine application together with the growing use of wind energy pose a challenge for the design engineers who are trying to increase torque without making the generator larger. When it comes to high torque density, the limiting factor in every electrical machine is heat, and if the electrical machine parts exceed their maximum allowable continuous operating temperature, even for a short time, they can suffer permanent damage. Therefore, highly efficient thermal design or cooling methods is needed. One of the promising solutions to enhance heat transfer performances of high-power, low-speed electrical machines is the direct cooling of the windings. This doctoral dissertation proposes a rotor-surface-magnet synchronous generator with a fractional slot nonoverlapping stator winding made of hollow conductors, through which liquid coolant can be passed directly during the application of current in order to increase the convective heat transfer capabilities and reduce the generator mass. This doctoral dissertation focuses on the electromagnetic design of a liquid-cooled direct-drive permanent-magnet synchronous generator (LC DD-PMSG) for a directdrive wind turbine application. The analytical calculation of the magnetic field distribution is carried out with the ambition of fast and accurate predicting of the main dimensions of the machine and especially the thickness of the permanent magnets; the generator electromagnetic parameters as well as the design optimization. The focus is on the generator design with a fractional slot non-overlapping winding placed into open stator slots. This is an a priori selection to guarantee easy manufacturing of the LC winding. A thermal analysis of the LC DD-PMSG based on a lumped parameter thermal model takes place with the ambition of evaluating the generator thermal performance. The thermal model was adapted to take into account the uneven copper loss distribution resulting from the skin effect as well as the effect of temperature on the copper winding resistance and the thermophysical properties of the coolant. The developed lumpedparameter thermal model and the analytical calculation of the magnetic field distribution can both be integrated with the presented algorithm to optimize an LC DD-PMSG design. Based on an instrumented small prototype with liquid-cooled tooth-coils, the following targets have been achieved: experimental determination of the performance of the direct liquid cooling of the stator winding and validating the temperatures predicted by an analytical thermal model; proving the feasibility of manufacturing the liquid-cooled tooth-coil winding; moreover, demonstration of the objectives of the project to potential customers.

Electrolocation-communication discharges of the fish Gymnotus carapo L. (Gymnotidae: Gymnotiformes) during behavioral sleep

Technical problems have hampered the study of sleep in teleosts. The electrical discharges of Gymnotus carapo L. (Gymnotidae: Gymnotiformes) were monitored to evaluate their ease and reliability as parameters to study sleep. The discharges were detected by electrodes immersed in a glass aquarium and were recorded on a conventional polygraph. G. carapo showed conspicuous signs of behavioral sleep. During these periods, opercular beat rates were counted, electric discharges recorded, and the "sharp discharge increase" (SDI) of the orienting reflex was investigated. All 20 animals monitored maintained electrical discharges during behavioral sleep. The discharge frequencies during sleep (50.3 ± 10.4 Hz) were not significantly different from those observed when the fish was awake and inactive (57.2 ± 12.1 Hz) (Wilcoxon matched-pairs signed-ranks test, P>0.05). However, the SDI, which was prevalent in the awake fish, was not observed during periods of behavioral sleep. Additional observations showed that the species had cannibalistic habits. When presented with electrical discharges from a conspecific, the sleeping fish showed an initial decrease or pause in discharge frequency, while the awake fish did not have this response. We conclude that the electrical discharges of G. carapo were not conspicuous indicators of behavioral sleep. Discharges may have been maintained during sleep for sensory purposes, i.e., conspecific detection and avoidance of cannibalistic attacks.

The Impact of Electrical Capacity Market Mechanisms on Capacity Mobility and End Use Customer Pricing

Potential impacts of electrical capacity market design on capacity mobility and end use customer pricing are analyzed. Market rules and historical evolution are summarized to provide a background for the analysis. The summarized rules are then examined for impacts on capacity mobility. A summary of the aspects of successful capacity markets is provided. Two United States market regions are chosen for analysis based upon their market history and proximity to each other. The MISO region is chosen due to recent developments in capacity market mechanisms. The PJM region neighbors the MISO region and is similar in size and makeup. The PJM region has had a capacity market mechanism for over a decade and allows for a controlled comparison of the MISO region’s developments. Capacity rules are found to have an impact on the mobility of capacity between regions. Regulatory restrictions and financial penalties for the movement of capacity between regions are found which effectively hinder such mobility. Capacity market evolution timelines are formed from the historical evolution previously summarized and compared to historical pricing to inspect for a correlation. No direct and immediate impact on end use customer pricing was found due to capacity market design. The components of end use customer pricing are briefly examined.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

MARKETING COMMUNICATIONS IN B2B COMPANIES – The Roles of Marketing Communication Tools in the Digital Age

Marketing communications has gone through significant changes during the last decades and new online tools have been leading this change for the last decade. Now, in the digital age, if wanting to be successful companies need to experiment new things and seize the opportunities online provides and adapt to the new environment. However, during this time the marketing communication mix and the meanings given to the various components of it have not changed dramatically, and personal selling, direct marketing, sales promotion, advertising and public relations activities are still regarded as important tools in the marketing communications mix. The purpose of this study was to examine business-to-business marketing communications and the tools used by companies in their marketing communications efforts in the digital age and in a global environment. The research questions dealt with the marketing communication tools and their roles as well as the role of online marketing communication and the way it has shaped the field of b2b marketing communications. In order to answer these questions, qualitative approach was chosen and the data was collected by theme interviews with six representatives of Finnish global companies from the b2b sector being interviewed. The theoretical framework covers the general field of b2b marketing communications and its main elements. The online environment as well as the concept of a global marketplace and integrated approach to marketing communication activities is also discussed. The theory was supported by the interviews regarding the activities and roles of the marketing communication tools and both theory as well as the interviews found personal selling to be a vital tool. However, the importance of online has grown and online marketing activities have risen right next to personal selling. The use of analytics and marketing automation was found to be of great interest in the interviews and they were seen as a growing domain in b2b marketing communications. The importance of targeted and personalised messages from relevant medias was a repeating theme as was the customer-centric approach in marketing communication activities. Also, offline and online tools and channels were seen as something that should be treated together as an entity rather than as separate activities. Relevant content created according to the needs of the customer with the gathered data from analytics were seen as the future of b2b marketing communications. Online has added its input to the more traditionally perceived tools and they are executed within the framework of the digital age. Nevertheless, even though online has increased its presence in the b2b marketing communications mix, the more traditionally perceived marketing communication tools, especially personal selling, have not lost their meaning or place in the b2b marketing communication mix.

Design and Drive-Cycle Based Analysis of Direct-Driven Permanent Magnet Synchronous Machine for a Small Urban Use Electric Vehicle

A direct-driven permanent magnet synchronous machine for a small urban use electric vehicle is presented. The measured performance of the machine at the test bench as well as the performance over the modified New European Drive Cycle will be given. The effect of optimal current components, maximizing the efficiency and taking into account the iron loss, is compared with the simple id=0 – control. The machine currents and losses during the drive cycle are calculated and compared with each other.

Electrical Safety of Island Operated Low Voltage DC Network

Today, renewable energy technologies and modern power electronics have made it feasible to implement low voltage direct current (LVDC) microgrids (MGs) ca-pable to island operation. Such LVDC networks are particularly useful in remote areas. However, there are still pending issues in island operated LVDC MGs like electrical safety and controlled operation, which should be addressed before wide-scale implementation. This thesis is focused on the overall protection of an island operated LVDC network concept, including protection against electrical shocks, mains equipment protection and protection of photovoltaic (PV) power sources and battery energy storage systems (BESSs). The topic is approached through ex-amination of the safety hazards and the appropriate methods to protect against them, comprising considerations for earthing system selection and realisation of the protection system.

The Impact of Foreign Direct Investment Inflows on the Economic Growth of Bangladesh. The Roles of Infrastructural Facilities

Foreign direct investment (FDI) inflow has been a key concern for Bangladesh to obtain additional support for the economic development. The Government of Bangladesh continuously competing with other South Asian countries and putting more effort to increase the number of FDI inflows in the country. From the country’s perspective, the constant increasing rate of economic growth shows a positive outcome of FDI inflow. However, the country still not performing up to the mark to pull enough FDI inflows to its potential. Thus, this study discusses about the major determinants and factors affecting FDI inflows in Bangladesh. Among those determinants and factors, infrastructural facility is considered as the most important to affect FDI inflows. FDI inflow is fundamentally depending upon infrastructural facilities to achieve its desire success. Foreign investors take this issue very seriously because based on this they can measure their ease of doing business in the host country. Despite of providing a large market size, due to having weak and lack of infrastructural facilities, Bangladesh is facing trouble in drawing attention of the foreign investors. In order to make the infrastructural facilities happen, it is highly required to organize each of the systems under of it. The body of this study discussed about the weak infrastructures in Bangladesh such as transport and communication, power and energy, education system, and governance services. Improvement in one of these systems cannot provide valuable positive changes on FDI inflows. It requires improvement in all the weak systems to grasp multinational companies and attract foreign investors. On the basis of this research problem, research questions are established. Both qualitative and quantitative methods are used to answer the research questions. Furthermore, several theories have been applied to justify possible scenarios from the research problem. In addition, the history in between Bangladesh, trade liberalization, and FDI inflows is presented briefly.

The Impact of Foreign Direct Investment Inflows on the Economic Growth of Bangladesh. The Roles of Infrastructural Facilities

Foreign direct investment (FDI) inflow has been a key concern for Bangladesh to obtain additional support for the economic development. The Government of Bangladesh continuously competing with other South Asian countries and putting more effort to increase the number of FDI inflows in the country. From the country’s perspective, the constant increasing rate of economic growth shows a positive outcome of FDI inflow. However, the country still not performing up to the mark to pull enough FDI inflows to its potential. Thus, this study discusses about the major determinants and factors affecting FDI inflows in Bangladesh. Among those determinants and factors, infrastructural facility is considered as the most important to affect FDI inflows. FDI inflow is fundamentally depending upon infrastructural facilities to achieve its desire success. Foreign investors take this issue very seriously because based on this they can measure their ease of doing business in the host country. Despite of providing a large market size, due to having weak and lack of infrastructural facilities, Bangladesh is facing trouble in drawing attention of the foreign investors. In order to make the infrastructural facilities happen, it is highly required to organize each of the systems under of it. The body of this study discussed about the weak infrastructures in Bangladesh such as transport and communication, power and energy, education system, and governance services. Improvement in one of these systems cannot provide valuable positive changes on FDI inflows. It requires improvement in all the weak systems to grasp multinational companies and attract foreign investors. On the basis of this research problem, research questions are established. Both qualitative and quantitative methods are used to answer the research questions. Furthermore, several theories have been applied to justify possible scenarios from the research problem. In addition, the history in between Bangladesh, trade liberalization, and FDI inflows is presented briefly

Projet pilote d'aide à distance en direct à la Bibliothèque ÉPC-Biologie de l'Université de Montréal

Communication présentée dans le cadre du programme de formation continue de la Corporation des bibliothécaires professionnels du Québec, vendredi le 11 mars 2005.

Global Internet governance and the public interest in communication

Élaborée à partir d’une étude de cas extensive focalisant sur les perspectives multiples et concurrentes ayant émergé lors des négociations sur la gouvernance de l’Internet, thématique ayant dominé l’agenda politique du Sommet mondial sur la société de l’information (SMSI), cette thèse examine les manières avec lesquelles les débats mondiaux sur la gouvernance de l’Internet influencent la notion d’intérêt public en communication. Établie sur la base d’une observation participante extensive, d’entrevues semi-structurées et de l’analyse d’une documentation formelle et informelle associée au SMSI, cette thèse fait état de l’émergence des enjeux associés à la gouvernance de l’Internet au SMSI et présente une analyse approfondie des négociations ayant porté sur cet enjeu. Le cadre théorique développé par Lawrence Lessig au travers duquel « le code est la loi » est appliqué afin d’expliquer comment les différents acteurs ont débattu et ultimement atteint un consensus sur les frontières venant séparer les enjeux normatifs de politique publique et les questions techniques de régulation et de gestion du réseau. Cette thèse discute également de l’évolution des débats autour de la gouvernance mondiale de l’Internet ayant pris place à la suite de la conclusion du SMSI. Sur la base de cette étude de cas, un ensemble de conclusions sont formulées sur les acteurs et les caractéristiques institutionnelles ayant influencé les négociations sur la gouvernance de l’internet. Il est également suggéré que le SMSI a redéfini une discussion étroite sur la gestion d’un ensemble de fonctions techniques de l’Internet en un domaine de politique publique plus large de gouvernance mondiale de l’Internet. Il est également défendu que la notion d’intérêt public dans la gouvernance mondiale de l’Internet est conceptualisée autour des processus de participation et d’intégration des différentes parties prenantes au processus politique. Les implications directes et indirectes qui découlent de ce constat pour comprendre plus largement la notion d’intérêt public dans le domaine de la communication sont également présentées et discutées. En conclusion, cette thèse s’interroge sur les implications programmatiques des éléments ayant été précédemment soulevées pour la recherche médiatique et communicationnelle.

Technologies de l'information et de la communication (TIC) et rendement académique en contexte universitaires béninois : cas des apprenants en droit de l'Université d'Abomey-Calavi

La présente recherche vise à mieux comprendre, dans le contexte universitaire béninois, s’il peut exister un lien qualitatif entre TIC et rendement académique afin de pouvoir mettre les TIC à contribution pour améliorer significativement les mauvais résultats des apprenants, notamment au premier cycle universitaire. Cette étude est tout particulièrement importante dans notre contexte où les TIC font de plus en plus leur apparition en pédagogie universitaire et où les étudiants recourent aux TIC dans leur pratique plus que les formateurs dans la leur. Le cadre de référence retenu pour la recherche est structuré autour des concepts de l’apprentissage assisté par les TIC, de motivation en éducation et de rendement académique. Pour atteindre notre objectif de recherche, nous avons opté pour une démarche mixte : quantitative et qualitative. Il s’agit d’une étude descriptive/explicative. Nous avons mené une enquête par questionnaires auprès de 156 étudiants et 15 enseignants et fait des entrevues avec 11 étudiants et 6 enseignants. Les principaux résultats sont présentés sous forme d’articles respectivement en ce qui a trait à l’impact des TIC sur la motivation et la réussite, aux usages des TIC les plus fréquemment rencontrés chez les apprenants, et à la place des TIC dans la pratique pédagogique des enseignants de la faculté de droit de l’Université d’Abomey-Calavi. Plus précisément, il ressort des résultats que la majorité des participants ont une perception en général positive du potentiel motivationnel des TIC pour l’apprentissage. Cependant, sur une cote maximale de 7 (correspond très fortement), la perception des répondants relativement à l’impact positif de l’utilisation des TIC sur le rendement académique tourne autour d’une cote moyenne de 4 (correspond assez). D’où, une perception en général mitigée du lien entre l’apprentissage assisté par les TIC et la réussite. Le croisement des résultats des données quantitatives avec ceux de l’analyse qualitative induit, sur ce point, une perception positive prononcée des rapports entre TIC et rendement. Les résultats montrent également que les usages des TIC les plus fréquents chez ces apprenants sont le courriel (en tête), suivi de la recherche et du traitement de texte, avec une fréquence moyenne d’ « une fois par semaine ». Tous ces constats n’accréditent pas véritablement un usage académique des TIC. Chez les enseignants, les résultats ont montré aussi qu’il n’y a pas encore de réelles applications des TIC en situation d’enseignement : ils font plutôt un usage personnel des TIC et pas encore véritablement pédagogique. La conséquence logique de ces résultats est qu’il n’existe pas encore un lien qualitatif direct entre TIC et rendement académique en contexte universitaire béninois.

La politesse dans la communication interculturelle : les stratégies de politesse utilisées par les coréens apprenant le français comme langue seconde lors des situations de demande

La présente recherche a pour objectif d’examiner les stratégies de politesse utilisées par des apprenants coréens qui apprennent le français comme langue seconde lors des situations de demande et de mettre en évidence le rôle de la L1 et de la culture d’origine des apprenants quant à leurs choix des stratégies de politesse en français. Trois groupes de répondants ont participé à la recherche : 30 locuteurs natifs coréens qui habitent à Séoul, en Corée, 30 étudiants coréens apprenant le français comme langue seconde à Montréal, au Canada, et 30 locuteurs natifs francophones habitant Montréal. Les données recueillies auprès des locuteurs natifs ont servi de bases de données reflétant respectivement les normes de la L1 et celles de la langue cible. Pour la collecte de données, nous avons utilisé quatre outils : le Discourse Completion Test (DCT) écrit, des échelles d’évaluation des variables contextuelles, un Questionnaire à choix multiples (QCM) ainsi qu’une entrevue semi-structurée. Les réponses obtenues au DCT écrit ont été analysées à l’aide du schéma de codage élaboré dans le cadre du Cross-Cultural Speech Act Realization Project (CCSARP) (Blum-Kulka, House, & Kasper, 1989). Les résultats de notre recherche ont démontré que les apprenants coréens ont estimé les variables contextuelles, comme l’intimité et le pouvoir social ressentis vis-à-vis de l’interlocuteur dans les situations de demande de façon similaire aux locuteurs natifs francophones, alors qu’ils ont eu tendance à estimer une plus grande gravité d’imposition de la demande que les deux groupes de locuteurs natifs dans plusieurs situations de demande. Quant aux stratégies de demande, tandis que ce sont les stratégies indirectes qui ont été le plus fréquemment utilisées par les apprenants coréens et les locuteurs natifs francophones, les apprenants coréens ont montré une tendance au transfert pragmatique de la L1, en recourant aux stratégies directes plus fréquemment que les locuteurs natifs francophones. De plus, étant donné que les apprenants coréens ont utilisé beaucoup moins d’atténuateurs que les locuteurs natifs francophones, leurs formules de demande étaient plus directes et moins polies que celles employées par les locuteurs natifs francophones. En ce qui concerne les mouvements de soutien (supportive moves), les apprenants coréens se sont démarqués des deux groupes de locuteurs natifs, en recourant plus fréquemment à certaines catégories de mouvements de soutien que les autres répondants. Les analyses de corrélation entre l’estimation des variables contextuelles et le choix des stratégies de politesse nous ont permis de constater que les apprenants coréens ainsi que les locuteurs natifs francophones ont eu tendance à utiliser davantage d’atténuateurs lorsque le locuteur possède moins de pouvoir social. Les implications des résultats pour l’enseignement et l’apprentissage des aspects de la politesse dans la classe de français langue seconde ont été exposées.

Comparison of Microwave and Electrical Properties Selected Conducting Polymers

Microwave properties of conductive polymers is crucial because of their wide areas of applications such as coating in reflector antennas, coating in electronic equipments, firequenry selective .surfaces, EMI materials, satellite communication links, microchip antennas, and medical applications. This work involves a comparative study of dielectric properties of selected conducting polymers such as polyaniline. poly(3,4-eth),lenedio.syt2iophene), polvthiophene, polvpvrrole. and pohparaphenylene diazomethine (PPDA) in microwave and DC,fields. The inicrowave properties such as dielectric constant, dielectric loss. absorption coefficient, heating coefficient, skin depth, and conductivity in the microwave frequency (S hand), and DC fields were compared. PEDOT and polccuiiline were found to exhibit excellent properties in DC field and microwave frequencies, which make thein potential materials in many of the alorenientioned applications

Studies on Electrical and Thermal Properties of Certain Selected Photonic Materials

The present thesis is centered around the study of electrical and thermal properties of certain selected photonic materials.We have studied the electrical conduction mechanism in various phases of certain selected photonic materials and those associated with different phase transitions occurring in them. A phase transition leaves its own impressions on the key parameters like electrical conductivity and dielectric constant. However, the activation energy calculation reveals the dominant factor responsible for conduction process.PA measurements of thermal diffusivity in certain other important photonic materials are included in the remaining part of the research work presented in this thesis. PA technique is a promising tool for studying thermal diffusivities of solid samples in any form. Because of its crucial role and common occurrence in heat flow problems, the thermal diffusivity determination is often necessary and knowledge of thermal diffusivity can intum be used to calculate the thermal conductivity. Especially,knowledge of the thermal diffusivity of semiconductors is important due to its relation to the power dissipation problem in microelectronic and optoelectronic devices which limits their performances. More than that, the thermal properties, especially those of thin films are of growing interest in microelectronics and microsystems because of the heat removal problem involved in highly integrated devices. The prescribed chapter of the present theis demonstrates how direct measurement of thermal diffusivity can be carried out in thin films of interest in a simple and elegant manner using PA techniques. Although results of only representative measurements viz; thermal diffusivity values in Indium, Aluminium, Silver and CdS thin films are given here, evaluation of this quantity for any photonic and / electronic material can be carried out using this technique in a very simple and straight forward manner.