Developments and Microbiological applications in African foods: Emphasis on Nigerian Wara cheese

African indigenous foods have received limited research. Most of these indigenous foods are fermented and they form part of the rich nutritional culture of many groups in African countries. The industrialization and commercialisation of these indigenous African fermented foods should be preceded by a thorough scientific knowledge of their processing which can be vital in the elimination of hunger and poverty. This study highlighted emerging developments and the microbiology of cereal-based and cassava-based food products that constitute a major part of the human diet in most African countries. In addition, investigations were also carried out on the coagulant of the Calotropis procera plant used in traditional production of Nigerian Wara cheese and on the effects of adding a nisin producing Lactococcus lactis strain originating from human milk to Nigerian Wara cheese. Fermented cereal-based food such as ogi utilize popular African and readily available grains maize, millet or sorghum as substrates and is popular as a weaning diet in infants. In this study, the bulkiness caused by starch gelatinization was solved by amylase treatments in the investigation on cooked and fermented oat bran porridge. A similar treatment could reduce the viscosity of any cereal porridge. The properties of the Sodom apple leaves (Calotropis procera) extract in cheesemaking were studied. C. procera was affected by monovalent (K+ and Na+) and divalent (Mg2+ and Ca2+) cations during coagulation. The rennet strength of this coagulant was found to be 7 % compared to animal rennet at 35 °C. Increasing the incubation temperature to 70 °C increased the rennet strength 28-fold. The molecular weight of the partially purified protease was determined by SDS-PAGE and was confirmed by Zymography to be approximately 60 kilodaltons. The high proteolytic activity at 70 °C supported the suitability of the protease enzyme as a coagulant in future commercial production of Nigerian Wara cheese. It was also possible to extend the shelf life of Wara cheese by a nisin producing lactic acid bacteria Lactococcus lactis LAC309. The levels of nisin in both whey and curd fractions of Wara were investigated, results showed a 3 log reduction of toxicogenic Bacillus licheniformis spiked on Wara after 3 days. These studies are the first in Finland to promote the advancement of scientific knowledge in African foods. Recognizing these indigenous food products and an efficient transfer of technology from the developed countries to industrialize them are necessary towards a successful realization of the United Nations Millenium Development Program.

Effectiveness of commercial harvesting in controlling feral-pig populations

Context. The feral pig (Sus scrofa) is a widespread pest species in Australia and its populations are commonly controlled to reduce damage to agriculture and the environment. Feral pigs are also a resource and harvested for commercial export as game meat. Although many other control techniques are used, commercial harvesting of feral pigs is often encouraged by land managers, because it carries little or no cost and is widely perceived to control populations. Aims. To use feral-pig harvesting records, density data and simple harvest models to examine the effectiveness of commercial harvesting to reduce feral-pig populations. Methods. The present study examined commercial harvest off-take on six sites (246-657 km2) in southern Queensland, and 20 large blocks (~2-6000 km2) throughout Queensland. The harvest off-take for each site was divided by monthly or average annual population size, determined by aerial survey, to calculate monthly and annual harvest rates.Asimple harvest model assuming logistic population growth was used to determine the likely effectiveness of harvesting. Key results. Commercial harvest rates were generally low (<~20%) and are likely to provide only modest reductions in population size. Additionally, harvest rates capable of substantial reductions (>50%) in long-term population size were isolated occurrences and not maintained across sites and years. High harvest rates were observed only at low densities. Although these harvest rates may be sufficiently high to hold populations at low densities, the population is likely to escape this entrapment following a flush in food supply or a reduction in harvest effort. Implications. Our results demonstrated that, at current harvest rates, commercial harvesting is ineffective for the landscape-scale control of feral-pig populations. Unless harvest rates can be significantly increased, commercial harvesting should be used as a supplement to, rather than as a substitute for, other damage-control techniques.

ICPH 2671 – the world's first commercial food legume hybrid

ICRISAT scientists, working with Indian programme counterparts, developed the world's first cytoplasmic-nuclear male sterility (CMS)-based commercial hybrid in a food legume, the pigeonpea [Cajanus cajan (L.) Millsp.]. The CMS, in combination with natural outcrossing of the crop, was used to develop viable hybrid breeding technology. Hybrid ICPH 2671 recorded 47% superiority for grain yield over the control variety ‘Maruti’ in multilocation on-station testing for 4 years. In the on-farm trials conducted in five Indian states, mean yield of this hybrid (1396 kg/ha) was 46.5% greater than that of the popular cv. ‘Maruti’ (953 kg/ha). Hybrid ICPH 2671 also exhibited high levels of resistance to Fusarium wilt and sterility mosaic diseases. The outstanding performance of this hybrid has led to its release for cultivation in India by both a private seed company (as ‘Pushkal’) and a public sector university (as ‘RV ICPH 2671’). Recent developments in hybrid breeding technology and high yield advantages realized in farmers' fields have given hope for a breakthrough in pigeonpea productivity.

Rhipicephalus (Boophilus) microplus tick in vitro feeding methods for functional (dsRNA) and vaccine candidate (antibody) screening

Rhipicephalus (Boophilus) microplus (Acari: Ixodidae) ticks cause economic losses for cattle industries throughout tropical and subtropical regions of the world estimated at $US2.5 billion annually. Lack of access to efficacious long-lasting vaccination regimes and increases in tick acaricide resistance have led to the investigation of targets for the development of novel tick vaccines and treatments. In vitro tick feeding has been used for many tick species to study the effect of new acaricides on the transmission of tick-borne pathogens. Few studies have reported the use of in vitro feeding for functional genomic studies using RNA interference and/or the effect of specific anti-tick antibodies. In particular, in vitro feeding reports for the cattle tick are limited due to its relatively short hypostome. Previously published methods were further modified to broaden optimal tick sizes/weights, feeding sources including bovine and ovine serum, optimisation of commercially available blood anti-coagulant tubes, and IgG concentrations for effective antibody delivery. Ticks are fed overnight and monitored for ∼5–6 weeks to determine egg output and success of larval emergence using a humidified incubator. Lithium-heparin blood tubes provided the most reliable anti-coagulant for bovine blood feeding compared with commercial citrated (CPDA) and EDTA tubes. Although >30 mg semi-engorged ticks fed more reliably, ticks as small as 15 mg also fed to repletion to lay viable eggs. Ticks which gained less than ∼10 mg during in vitro feeding typically did not lay eggs. One mg/ml IgG from Bm86-vaccinated cattle produced a potent anti-tick effect in vitro (83% efficacy) similar to that observed in vivo. Alternatively, feeding of dsRNA targeting Bm86 did not demonstrate anti-tick effects (11% efficacy) compared with the potent effects of ubiquitin dsRNA. This study optimises R. microplus tick in vitro feeding methods which support the development of cattle tick vaccines and treatments.

Commercial-scale Alternaria brown spot resistance screening as the first step in breeding new mandarins for Australia

Rapid screening tests and an appreciation of the simple genetic control of Alternaria brown spot (ABS) susceptibility have existed for many years, and yet the application of this knowledge to commercial-scale breeding programs has been limited. Detached leaf assays were first demonstrated more than 40 years ago and reliable data suggesting a single gene determining susceptibility has been emerging for at least 20 years. However it is only recently that the requirement for genetic resistance in new hybrids has become a priority, following increased disease prevalence in Australian mandarin production areas previously considered too dry for the pathogen. Almost all of the high-fruit-quality parents developed so far by the Queensland-based breeding program are susceptible to ABS necessitating the screening of their progeny to avoid commercialisation of susceptible hybrids. This is done effectively and efficiently by spraying 3-6 month old hybrid seedlings with a spore suspension derived from a toxin-producing field isolate of Alternaria alternate, then incubating these seedlings in a cool room at 25°C and high humidity for 5 days. Susceptible seedlings show clear disease symptoms and are discarded. Analysis of observed and expected segregation ratios loosely support the hypothesis for a single dominant gene for susceptibility, but do not rule out the possibility of alternative genetic models. After implementing the routine screening for ABS resistance for three seasons we now have more than 20,000 hybrids growing in field progeny blocks that have been screened for resistance to the ABS disease.

Efficacy of acibenzolar-S-methyl (Bion®) treatment of Australian commercial passionfruit, Passiflora edulis f. sp. flavicarpa, on resistance to Passionfruit woodiness virus (PWV) and activities of chitinase & β-1,3-glucanase

This greenhouse study investigated the efficacy of acibenzolar-S-methyl (Bion®) treatment of lower leaves of passionfruit, (Passiflora edulis f. sp. flavicarpa), on Passionfruit woodiness disease and activities of two pathogenesis-related proteins, chitinase and β-1,3-glucanase after inoculation with passionfruit woodiness virus (PWV). All Bion® concentrations reduced disease symptoms, but the concentration of 0.025 g active ingredient (a.i.)/l was the most effective, reducing disease severity in systemic leaves by 23, 29 and 30 compared with water-treated controls at 30, 40 and 50 days post inoculation (dpi) with PWV, respectively. Correspondingly, relative virus concentration as determined by DAS-ELISA in the upper, untreated leaves (new growth) above the site of inoculation at 50 dpi was reduced by 17 and 22 in plants treated with 0.025 and 0.05 g a.i./l, respectively. Bion® treatment and subsequent inoculation with PWV increased chitinase and β-1,3-glucanase activities in the new leaves above the site of inoculation at 30 dpi with PWV. It was concluded that optimal protective Bion® treatment concentrations were 0.025 and 0.05 g a.i./l.

Sirex woodwasp range expansion in Australia: performance and parasitism on two commercial pine species

Sirex woodwasp was detected in Queensland in 2009 and rapidly established in softwood plantations (Pinus radiata and P. taeda) in southern border regions. Biocontrol inoculations of Deladenus siricidicola began soon after, and adults were monitored to assess the success of the programme. Wasp size, sex ratios, emergence phenology and nematode parasitism rates were recorded, along with the assessment of wild-caught females. Patterns varied within and among seasons, but overall, P. taeda appeared to be a less suitable host than P. radiata, producing smaller adults, lower fat body content and fewer females. Sirex emerging from P. taeda also showed lower levels of nematode parasitism, possibly due to interactions with the more abundant blue-stain fungus in this host. Sirex adults generally emerged between November and March, with distinct peaks in January and March, separated by a marked drop in emergence in early February. Temperature provided the best correlate of seasonal emergence, with fortnights with higher mean minimum temperatures having higher numbers of Sirex emerging. This has implications for the anticipated northward spread of Sirex into sub-tropical coastal plantation regions. Following four seasons of inundative release of nematodes in Queensland, parasitism rates remain low and have resulted in only partial sterilization of infected females.

On-farm Campylobacter and Escherichia coli in commercial broiler chickens: Re-used bedding does not influence Campylobacter emergence and levels across sequential farming cycles

Limitations in quality bedding material have resulted in the growing need to re-use litter during broiler farming in some countries, which can be of concern from a food-safety perspective. The aim of this study was to compare the Campylobacter levels in ceca and litter across three litter treatments under commercial farming conditions. The litter treatments were (a) the use of new litter after each farming cycle; (b) an Australian partial litter re-use practice; and (c) a full litter re-use practice. The study was carried out on two farms over two years (Farm 1, from 2009–2010 and Farm 2, from 2010–2011), across three sheds (35,000 to 40,000 chickens/shed) on each farm, adopting three different litter treatments across six commercial cycles. A random sampling design was adopted to test litter and ceca for Campylobacter and Escherichia coli, prior to commercial first thin-out and final pick-up. Campylobacter levels varied little across litter practices and farming cycles on each farm and were in the range of log 8.0–9.0 CFU/g in ceca and log 4.0–6.0 MPN/g for litter. Similarly the E. coli in ceca were ∼log 7.0 CFU/g. At first thin-out and final pick-up, the statistical analysis for both litter and ceca showed that the three-way interaction (treatments by farms by times) was highly significant (P < 0.01), indicating that the patterns of Campylobacter emergence/presence across time vary between the farms, cycles and pickups. The emergence and levels of both organisms were not influenced by litter treatments across the six farming cycles on both farms. Either C. jejuni or C. coli could be the dominant species across litter and ceca, and this phenomenon could not be attributed to specific litter treatments. Irrespective of the litter treatments in place, cycle 2 on Farm 2 remained campylobacter-free. These outcomes suggest that litter treatments did not directly influence the time of emergence and levels of Campylobacter and E. coli during commercial farming.

Queensland Spanner Crab Fishery: Commercial quota setting for June 2016 – May 2018

The Queensland (QLD) fishery for spanner crabs primarily lands live crab for export overseas, with gross landings valued around A$5 million per year. Quota setting rules are used to assess and adjust total allowable harvest (quota) around an agreed target harvest of 1631 t and capped at a maximum of 2000 t. The quota varies based on catch rate indicators from the commercial fishery and a fishery independent survey. Quota management applies only to ‘Managed Area A’ which includes waters between Rockhampton and the New South Wales (NSW) border. This report has been prepared to inform Fisheries Queensland (Department of Agriculture and Fisheries) and stakeholders of catch trends and the estimated quota of spanner crabs in Managed Area A for the forthcoming annual quota periods (1 June 2016–31 May 2018). The quota calculations followed the methodology developed by the crab fishery Scientific Advisory Group (SAG) between November 2007 and March 2008. The QLD total reported spanner crab harvest was 1170 t for the 2015 calendar year. In 2015, a total of 55 vessels were active in the QLD fishery, down from 262 vessels at the fishery’s peak activity in 1994. Recent spanner crab harvests from NSW waters average about 125 t per year, but fell to 80 t in 2014–2015. The spanner crab Managed Area A commercial standardised catch rate averaged 0.818 kg per net-lift in 2015, 22.5% below the target level of 1.043. Compared to 2014, mean catch rates in 2015 were marginally improved south of Fraser Island. The NSW–QLD survey catch rate in 2015 was 20.541 crabs per ground-line, 33% above the target level of 13.972. This represented an increase in survey catch rates of about four crabs per groundline, compared to the 2014 survey. The QLD spanner crab total allowable harvest (quota) was set at 1923 t in the 2012-13 and 2013-14 fishing years, 1777 t in 2014-15 and 1631 t in 2015-16. The results from the current analysis rules indicate that the quota for the next two fishing years be retained at the base quota of 1631 t.

Queensland Spanner Crab Fishery : Commercial quota setting for June 2015 – May 2016

The Australian fishery for spanner crabs is the largest in the world, with the larger Queensland (QLD) sector’s landings primarily exported live overseas and GVP valued ~A$5 million per year. Spanner crabs are unique in that they may live up to 15 years, significantly more than blue swimmer crabs (Portunus armatus) and mud crabs (Scylla serrata), the two other important crab species caught in Queensland. Spanner crabs are caught using a flat net called a dilly, on which the crabs becoming entangled via the swimming legs. Quota setting rules are used to assess and adjust total allowable harvest (quota) around an agreed target harvest of 1631 t and capped at a maximum of 2000 t. The quota varies based on catch rate indicators from the commercial fishery and a fishery-independent survey from the previous two years, compared to target reference points. Quota management applies only to ‘Managed Area A’ which includes waters between Rockhampton and the New South Wales (NSW) border. This report has been prepared to inform Fisheries Queensland (Department of Agriculture and Fisheries) and stakeholders of catch trends and the estimated quota of spanner crabs in Managed Area A for the forthcoming quota period (1 June 2015–31 May 2016). The quota calculations followed the methodology developed by the crab fishery Scientific Advisory Group (SAG) between November 2007 and March 2008. The total reported spanner crab harvest was 917 t for the 2014 calendar year, almost all of which was taken from Managed Area A. In 2014, a total of 59 vessels were active in the QLD fishery, the lowest number since the peak in 1994 of 262 vessels. Recent spanner crab harvests from NSW waters have been about 125 t per year. The spanner crab Managed Area A commercial standardised catch rate averaged 0.739 kg per net-lift in 2014, 24% below the target level of 1.043. Mean catch rates declined in the commercial fishery in 2014, although the magnitude of the decreases was highest in the area north of Fraser Island. The NSW–QLD survey catch rate in 2014 was 16.849 crabs per ground-line, 22% above the target level of 13.972. This represented a decrease in survey catch rates of 0.366 crabs per ground-line, compared to the 2013 survey. The Queensland spanner crab total allowable harvest (quota) was set at 1923 t in 2012 and 2013. In 2014, the quota was calculated at the base level of 1631 t. However, given that the 2012 fisheryindependent survey was not undertaken for financial reasons, stakeholders proposed that the total allowable commercial catch (TACC) be decreased to 1777 t; a level that was halfway between the 2012/13 quota of 1923 t and the recommended base quota of 1631 t. The results from the current analysis indicate that the quota for the 2015-2016 financial year be decreased from 1777 t to the base quota of 1631 t.

Build-up of toxic metals on the impervious surfaces of a commercial seaport

In the context of increasing threats to the sensitive marine ecosystem by toxic metals, this study investigated the metal build-up on impervious surfaces specific to commercial seaports. The knowledge generated in this study will contribute to managing toxic metal pollution of the marine ecosystem. The study found that inter-modal operations and main access roadway had the highest loads followed by container storage and vehicle marshalling sites, while the quay line and short term storage areas had the lowest. Additionally, it was found that Cr, Al, Pb, Cu and Zn were predominantly attached to solids, while significant amount of Cu, Pb and Zn were found as nutrient complexes. As such, treatment options based on solids retention can be effective for some metal species, while ineffective for other species. Furthermore, Cu and Zn are more likely to become bioavailable in seawater due to their strong association with nutrients. Mathematical models to replicate the metal build-up process were also developed using experimental design approach and partial least square regression. The models for Cr and Pb were found to be reliable, while those for Al, Zn and Cu were relatively less reliable, but could be employed for preliminary investigations.

Assignments of non-retail commercial leases: Some contentious issues

Assignment clauses in non-retail commercial leases are as infinitely varied as the circumstances in which disputes arise. Each clause must be individually interpreted as part of the lease in which it is embedded. Whilst the assignment of a lease is one of the most commonplace transactions between lessor and lessee, the case law reveals few unifying principles. This article seeks to cautiously identify a set of principles which should be in the mind of any lawyer when a dispute relating to an assignment arises. It concludes with a short checklist of matters which must be considered by such a person to encourage the application of principles in the first instance towards a resolution of the dispute.

Indoor air quality and energy management through real–time sensing in commercial buildings

Rapid growth in the global population requires expansion of building stock, which in turn calls for increased energy demand. This demand varies in time and also between different buildings, yet, conventional methods are only able to provide mean energy levels per zone and are unable to capture this inhomogeneity, which is important to conserve energy. An additional challenge is that some of the attempts to conserve energy, through for example lowering of ventilation rates, have been shown to exacerbate another problem, which is unacceptable indoor air quality (IAQ). The rise of sensing technology over the past decade has shown potential to address both these issues simultaneously by providing high–resolution tempo–spatial data to systematically analyse the energy demand and its consumption as well as the impacts of measures taken to control energy consumption on IAQ. However, challenges remain in the development of affordable services for data analysis, deployment of large–scale real–time sensing network and responding through Building Energy Management Systems. This article presents the fundamental drivers behind the rise of sensing technology for the management of energy and IAQ in urban built environments, highlights major challenges for their large–scale deployment and identifies the research gaps that should be closed by future investigations.

Simulation of Dust Loaded V-I Characteristics of a Commercial Thermal Power Plant Precipitator

A new approach based on finite difference method, is proposed for the simulation of electrical conditions in a dc energized wire-duct electrostatic precipitator with and without dust loading. Simulated voltage-curren characteristics with and without dust loading were compared with the measured characteristics for analyzing the performance of a precipitator. The simple finite difference method gives sufficiently accurate results with reduced mesh size. The results for dust free simulation were validated with published experimental data. Further measurements were conducted at a thermal power plant in India and the results compares well with the measured ones.